transparent lcd panel pc case price
Okay so for starters the quality of material in this is actually really nice it"s fully battle and the level of detail and just slight modifications that they have done to it just make it pretty easy to guide cables and stuff however you want, it is also a big case so if you have a somewhat smaller computer like mine and then you"re going to only take up about like half of the PC case but it"s also nice cuz you can fit just about any component in there. Now I do have to say mounting fans especially water cooled ones is going to be pretty difficult so it doesn"t have any top mounting nor right hand side mounting for anything the only mounting you have for fans is near the rear IO and the two fan areas in the back of the case. But like I said the quality put into this case is phenomenal it even has mesh guards on every single one of the fan outlets including the bottom one for the power supply. One thing I was kind a little disappointed by it was the fact that the display is made out of acrylic they say it"s made out of tempered glass but it feels like acrylic to me I could be wrong though and the fact that if you don"t have light-ish components it"s going to be pretty difficult to see the stuff on the screen. Speaking of the screen this is definitely the best part about it a lot of people say it"s just a gimmick but I find it incredibly useful especially when I"m playing video games and I can"t just click out of all of my stuff for whatever just to see how my hardware is doing and to have it just right next to me on my PC case is honestly a huge thing for me. But if you don"t want to put little widgets on it you can put wallpapers single colored things it"s awesome like you can even black it out to where you can"t even see the inside of it. This case also comes with three fans they"re not very good they look like third-party aftermarket probably Chinese knockoffs and only one of them lights up and even the lights are pretty disappointing so if you"re getting this cuz it comes with fans sorry to say but they"re not really worth it. The rest of the case has a very nice sleek look to it the right front side of the case has this cool techie lights and I think you can change the color of it through your motherboard"s RGB software so that"s really cool and also has lights that shine through the back where all of your stuff plugs in and I like that cuz it lights up all your ports especially during night gaming so you can see if you need to unplug a plug something in. Now to get all the widgets and stuff on it I do have to admit it was a pretty decent hassle for me, mainly because I didn"t know what I was doing I"ve never done something like this before but really the only problem I had was with rain meter it just refused to open and then just a countless things you have to go through and it"s just super complicated but once you get that done you can just go to a website download a theme or a widget that you like download it and then go to rain meter upload the skin and then depending on the widget sometimes you can customize like what version you want if you want to be circle or square or just a line or something like that you could also depending on the way that you can change the color of them especially for the music ones and you just drag it over to the display and set it up however you want put your favorite background on it and set all of the software to start up when you start up your computer and you"re all set. I was told that the air flow in this case is bad and it"s definitely lacking I wouldn"t say it"s bad, I can"t remember but I do believe that my CPU temperature has risen by about 5° since I put it in this case but that could be because I was using the aftermarket fans that were in it as my cooling fan for my water cooled CPU because I thought it lit up and then I was kind of disappointed and I haven"t taken it out. The case is also very silent now if you do have an airplane of a GPU or a CPU cooler fan then you might hear it a little bit but when I started my stuff up it was a huge difference compared to my other case and I thought that was really awesome it"s probably like this because 90% of it"s closed off but it"s definitely something that I like about it. You"re going to have to buy a display cord to HDMI if your GPU only has one HDMI port like mine does I have an RX 590, you can also try to find an HDMI to DVI port if your GPU is that old but unless you have two HDMI ports on your GPU you"re going to have to buy another cord because this requires to be plugged into your graphics card. And if you just want to have fun that you can use this as a gaming monitor now it is see-through and it"s not the greatest resolution I think it"s like 1200 x 900 resolution but it is absolutely doable if you want to
LCD Spec: 19” transparent TN LCD side panel display with 1280 x 1024 resolution enabling the complete customization of the side panel. Users can configure the digital display to feature video wallpaper, images, or system temperatures in real-time
There are plenty of unique computer cases on the market, but iBuyPower"s Snowblind Element separates itself from the pack with a transparent 19-inch LCD side panel with a 1024x1280 resolution to both show off your PC and display various graphics. It"s a little bit trippy, and it"s half off right now.
This is one of those cases where words alone don"t do it justice, you need to actually see it in action. To help with that, iBuyPower put together a video showcasing its Snowblind series. Have a watch:
Pretty neat, right? The Snowblind Element is based on NZXT"s S340 mid-tower, which is a good starting point. Unlike a regular S340, however, the side panel on the Element can display custom images, meters, and video wallpapers to give your setup a distinctive look.
What started off as an NZXT S340 morphed into a Snowblind Element, with a customizable transparent LCD side panel. If you want a case that stands out from the crowd, this is it.
Priced at $299 (MSRP), the Element is normally a tough sell, even with the nifty side panel. That"s why this deal is so enticing—it puts the case within reach of more reasonable budgets. I didn"t have a bead on this one during Black Friday and Cyber Monday, but according to a thread on Reddit (fist-bump for the heads up on this deal), it dropped to $129 during the former and $200 during the latter.
This deal sees the price nearly match its Black Friday discount. If you"re looking for something different, the Element definitely fits the bill. Otherwise, check out our picks of the best PC cases for other other recommended options.
Around 3 years ago, I started planning a build to replace my aging i5-3570K PC. I wanted something unique - something that couldn"t be simply purchased off the shelf. RGB was just getting big, so I went against the RGB trend and started looking into other ways to make my build stand out. Eventually, I was led to research transparent LCD side panel mods.
2 years ago I put together the initial PC. I picked up a Ryzen 7 1700x for $150 as a placeholder for Ryzen 3000 for this build. That release came, and to my surprise AMD was still lagging behind Intel in gaming performance. But with Ryzen 5000, that"s a different story! The Ryzen 5 5600X is a beast, with huge uplifts in single core performance compared to my old 1700X. Heck, it even beats it in multi core.
You can find a full build log here, which includes more pictures and even videos of it in action: https://forum.level1techs.com/t/time-for-my-second-build-a-project-lcd-case-v2-v3/135450/
iBUYPOWER"sSnowblind Element might look like an average mid-tower chassis but it offers a very uniuque design in the form of its transparent LCD side-panel. The case is on sale for $129 US, a full $200 US discount over its standard $329 US price. The case includes three fans, a tempered glass side panel, and a lot of RGB lighting. The unique feature of this case is the side panel not only is it a tempered glass, but it also works as a translucent LCD screen, allowing for endless customization!
The Snowblind Element offers three pre-installed fans, two 120 mm fans located in the front and one 120 mm fan installed in the rear of the case, this case does also include dust filters to make sure the inside of your case stays beautiful and free of any dust.
The supported motherboard sizes are ATX, Micro-ATX, and Mini-ITX, which means that any motherboard should fit with no issue and also supported is any GPU with a length of 14.3 inches (or 364 mm). This means that this case can support even an RTX 2080 ti with no issues, and with the seven card slots, you could have an SLI setup with no problems. Not only does this case allow you to change the side panel display at a moment"s notice, but this case is also able to accommodate everything from more fans, offering two 140 mm or 120 mm fans slots on the bottom of the case. Unfortunately, no fan slots are available on the side of this case.
The unique feature of this Snowblind Element is the translucent LCD panel, which allows you easily to display your computer"s information on a fresh design with little to no issue. This display is a 1024 x 1280 resolution, but I wouldn"t suggest playing any games on this being this display is only rated for 60 Hz and has a fair amount of input lag.
This Snowblind Element is a fantastic deal being $200 off, which drops the price of this tremendous case down to just $129, which is not nearly as expensive as the original price of $329. This case, at $329, would only be for significant case enthusiasts, but at the discounted rate, this case is a fantastic deal for any PC-focused person.
Transparent plastic and tempered glass have been the standard for PC cases for over a decade now. So if you’re going to be constantly looking at your PC’s guts, why not just end the pretense and stick a whole-ass monitor in there? That’s the idea behind the Side Panel Kit, a full 13.3-inch, 1080p monitor that sits behind the transparent panel of your PC case and connects directly to your motherboard. The screen acts as a standard monitor in Windows, displaying whatever you want.
This isn’t the first time we’ve seen massive screens mounted directly onto a desktop PC. In addition to novelties like smaller LCDs attached to CPU AIO pumps, RAM, graphics cards, and probably the backside of the motherboard by now, you might recall iBuyPower’s Project Snowblind. It also turned the entire side of a PC case into a display, albeit a transparent one designed more to show supplementary data. In comparison, Asrock’s screen is relatively basic. It’s just a nice little IPS LCD that sticks to the inside of your PC case with the included mounting brackets.
While the screen should be installable into any case that can physically house it (you’ll need a clear area on the side panel 300mm by 193mm, horizontal or vertical), there’s one little foible to the design that might be a dealbreaker. The screen connects directly to the motherboard via an Embedded DisplayPort (eDP) cable for both data and power, as noted by Tom’s Hardware. eDP is a standard connection often seen in laptop screen panels, but it’s rarely seen in consumer-facing electronics…and Asrock is the only company making motherboards with an eDP connection built-in. There’s no easy way to make an adapter, either, since unlike regular DisplayPort it includes electrical power as well.
At the time of writing only a handful of Asrock motherboards support the screen, mostly in the Z790 series (Intel 1700, with one B650 option for Ryzen fans). You can expect more high-end boards from Asrock to include the connection in the near future. Maybe by then the company will actually have an option to buy the Side Panel Kit, because it doesn’t appear to have a shipping date or price at the moment.
The media could not be loaded. Okay so for starters the quality of material in this is actually really nice it"s fully battle and the level of detail and just slight modifications that they have done to it just make it pretty easy to guide cables and stuff however you want, it is also a big case so if you have a somewhat smaller computer like mine and then you"re going to only take up about like half of the PC case but it"s also nice cuz you can fit just about any component in there. Now I do have to say mounting fans especially water cooled ones is going to be pretty difficult so it doesn"t have any top mounting nor right hand side mounting for anything the only mounting you have for fans is near the rear IO and the two fan areas in the back of the case. But like I said the quality put into this case is phenomenal it even has mesh guards on every single one of the fan outlets including the bottom one for the power supply. One thing I was kind a little disappointed by it was the fact that the display is made out of acrylic they say it"s made out of tempered glass but it feels like acrylic to me I could be wrong though and the fact that if you don"t have light-ish components it"s going to be pretty difficult to see the stuff on the screen. Speaking of the screen this is definitely the best part about it a lot of people say it"s just a gimmick but I find it incredibly useful especially when I"m playing video games and I can"t just click out of all of my stuff for whatever just to see how my hardware is doing and to have it just right next to me on my PC case is honestly a huge thing for me. But if you don"t want to put little widgets on it you can put wallpapers single colored things it"s awesome like you can even black it out to where you can"t even see the inside of it. This case also comes with three fans they"re not very good they look like third-party aftermarket probably Chinese knockoffs and only one of them lights up and even the lights are pretty disappointing so if you"re getting this cuz it comes with fans sorry to say but they"re not really worth it. The rest of the case has a very nice sleek look to it the right front side of the case has this cool techie lights and I think you can change the color of it through your motherboard"s RGB software so that"s really cool and also has lights that shine through the back where all of your stuff plugs in and I like that cuz it lights up all your ports especially during night gaming so you can see if you need to unplug a plug something in. Now to get all the widgets and stuff on it I do have to admit it was a pretty decent hassle for me, mainly because I didn"t know what I was doing I"ve never done something like this before but really the only problem I had was with rain meter it just refused to open and then just a countless things you have to go through and it"s just super complicated but once you get that done you can just go to a website download a theme or a widget that you like download it and then go to rain meter upload the skin and then depending on the widget sometimes you can customize like what version you want if you want to be circle or square or just a line or something like that you could also depending on the way that you can change the color of them especially for the music ones and you just drag it over to the display and set it up however you want put your favorite background on it and set all of the software to start up when you start up your computer and you"re all set. I was told that the air flow in this case is bad and it"s definitely lacking I wouldn"t say it"s bad, I can"t remember but I do believe that my CPU temperature has risen by about 5° since I put it in this case but that could be because I was using the aftermarket fans that were in it as my cooling fan for my water cooled CPU because I thought it lit up and then I was kind of disappointed and I haven"t taken it out. The case is also very silent now if you do have an airplane of a GPU or a CPU cooler fan then you might hear it a little bit but when I started my stuff up it was a huge difference compared to my other case and I thought that was really awesome it"s probably like this because 90% of it"s closed off but it"s definitely something that I like about it. You"re going to have to buy a display cord to HDMI if your GPU only has one HDMI port like mine does I have an RX 590, you can also try to find an HDMI to DVI port if your GPU is that old but unless you have two HDMI ports on your GPU you"re going to have to buy another cord because this requires to be plugged into your graphics card. And if you just want to have fun that you can use this as a gaming monitor now it is see-through and it"s not the greatest resolution I think it"s like 1200 x 900 resolution but it is absolutely doable if you want to
When choosing a transparent side panel, it is important to consider the design of the transparent side panels., though glass panels are often cheaper, they are not as durable as plastic and have less durability compared to other plastic side panels.
There are a variety of polycarbonate options available, though it is not always easy to find a suitable choice for them transparent side panel PC. Although a polypropylene option is available, there are a variety of polypropylene options available, both polypropylene options are also available. In addition, the polypropylene option is also available. Similarly, there is a polypropylene option available, although it is not the same as other plastic side panel PC.
Buy light panel PC cases from several wholesalers on Alibaba.com. Check out the wide variety of transparent side panel PC cases and other wholesale side panels at Alibaba.com.
Wholesale transparent side panel PC cases are a great choice. You can find a variety of these transparent side panel PC cases and other side panel PC cases, at Alibaba.com. transparent side panel PC cases are suitable for all kinds of applications.
I saw a really cool video of a PC case called "Snowblind", that had a transparent LCD Screen as a side panel. I was amazed over how cool it was. The only problem was that it was really expensive. Therefore, I tried making my own! In this instructables I will go through how I made it, and how you could make your own. The best of all, since it was made from an old monitor that was thrown away, it was basically free! I just added some LED strips on the inside of the case to get better contrast on the screen. You could probably re-use the monitors backlight, but it"s safer and easier to just get some cheap LED strips.
First, remove the frame of the panel. It is fixed with clips, so just bend the frame a little and lift the frame up. Next, separate the front LCD from the backlight. For the next step, you will have to be careful. This step involves removing the anti glare film. It is glued to the panel, and therefore it"s easy to break the LCD when trying to remove it.
Then you are done modding the LCD! Now, you can hook it up to the panel and test it. Just be careful with the ribbon cables going from the LCD PCB to the panel.
The side panel of this case fits the LCD perfectly. Just line it up to the side facing the back, and to the top, and use some tape to tape it to the glass. Then, use some vinyl on the outside where the LCD is not covering the glass.
It"s really important to have lots of lights inside the case, to make it easier to see the LCD. Therefore, try to fill the case with even more LED strips.
You are now ready to assemble everything. In this case, the controller fit nicely in the hard drive compartment, so I glued it there and fed the ribbon cable through the hole in the inside of the case. That way it was pretty much hidden inside the case.
Now you can carefully mount the side panel back on the computer. You might have to drill a new hole for the thumb screw in the back to make it fit properly.
Hey I have a little question, I also have a Dell 1905FP, but I think it"s an older model because I don"t have a ribbon cable but a normal cable with a plug. My problem is that I have peeled off one film but it still looks like there is a second film on the back because it is still a little blurry. But I"m afraid that if I try to pull them off, my LCD display will break. Maybe you have an idea. Thanks in advance
Stunning result ! Bought for 10€ a Dell 1907FPc which is fairly similar to yours. I have trouble identifying the pin layout to find the 5V pin. Did you plug in the power supply to your AC while checking with your multimetter ?0
Great tutorial and video! I"m trying my hand at replicating your process and I even got my hands on the exact monitor. I have reached the point where I"ve disassembled the panel and controllers, and discharged the capacitors from the PSU, but I am a little stuck at this point because I don"t know how to wire up the molex header. I watched your video and saw that you had two wires soldered to the power connector. Which connectors are they and where do they go on the molex cable? Thank you!
Really neat. I saw the same snowblind case and wanted it but too expensive. I also saw someone who made their own using a USB monitor. But I like your setup better.2
Terrific job! May I ask why you would need to remove the front polarizer? If my understanding is correct, both the front and back polarizers are needed in order for the LCD to work properly (i.e., the light gets polarized by the back polarizer first, and then passes through the front polarizer)? You comments will be appreciated!
Hey, great work on this project. I wanted to buy the snowbind case but couldn"t justify the cost. I have the same case and I ended up picking up the same monitor that you used in your project.
Is it possible that you post or send me photos of the inside of the case when you have this installed? I"m just a bit confused on how you wired up everything?
I tried taking some photos, but I have covered the screen PCB with a cover, so it was hard to see in the photos. I basically just laid it inside the case with a 90-degree angle. I tried drawing it here: (view from the front)0
I think you should have more pics and info about the re- mounting the LCD. After all if you don"t do it right all that work is for nothing. While I understand your wiring diagram, I think that it should be explained and a larger part of this Instructible...for example to get white lite your are powering all 3 lanes (red,green,blue) on the RGB tape.
Hello, Wonderfull project, I have the same case and I would love to do it (if I have time and the screen to the right size). Just a question, can you put a photo of the cable connection to see if it"s easy to open the case ? One little suggestion, instead of connecting the panel to the graphic card (which mean to run a cable outside, why don"t you use a USB to VGA or DVI converter (like this https://www.amazon.fr/Adaptateur-convertisseur-adaptateur-Affichage-multi-écrans/dp/B079L81FRD/ref=asc_df_B079L81FRD/?tag=googshopfr-21&linkCode=df0&hvadid=227894524041&hvpos=&hvnetw=g&hvrand=17927658121409960098&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9055710&hvtargid=pla-442905712462&psc=1) ?
Thanks! So I actually bought one of those adapters, as well as an internal USB 3.0 to USB A port and tried it that way, but I couldn"t get it to work reliably. You might have better luck than I have, but I found it simpler to just run the cable through the case. I just removed one of the PCIE slot covers, and ran it out through there, so opening and closing the case is not a problem.More CommentsPost Comment
I think it’s time we kick off the new year with a fresh case review. Today we have the Snowblind case from iBUYPOWER, which by popular demand is now available to purchase as a standalone case. This is a very special NZXT S340 rebrand because iBUYPOWER put a transparent TN display on the side panel… and I am going to attempt to game on it.
This is my first time with an iBUYPOWER product. The Snowblind Element case is $149 USD, which is a bit pricey for the S340 but given the LCD update, it is somewhat worth it. The original price of $299 USD is insane for reasons I will get to in a bit.
Let me go over the fun stuff first. Once you plug everything in and power on the system, you have to go into Display Settings to rotate the display into portrait mode as that is the correct orientation for the panel. It will simply show up as a secondary display with 1024 x 1280 resolution at 60Hz. You don’t need any apps for this to work properly, but when it comes to customization you can download the Snowblind application that allows you to actually maneuver system statistics like your CPU temperature, CPU usage, GPU usage, date/time for example. I have positioned all that information near the power supply shroud, because that is where it’s most visible.
Now aside from having a transparent LCD applied to the glass, three sides of the panel also have incredibly bright white LEDs acting as backlight. And you can see the image is more visible in the lower section where the shroud is closer to the panel. This is very cool and iBUYPOWER recommends white or silver hardware components to create the best visual contrast. And of course since the LCD is transparent, all of your hardware is visible. But one interesting byproduct of all this lighting on the inside of the case is massive exterior spill from literally any crevice that is open on the chassis, which is kind of cool but it’s also a little bit over the top.
I have to be honest with you, while this whole thing is very gimmicky, and I would not purchase this for myself, it is extremely fun to play with. You can create animated wallpapers using Wallpaper Engine from Steam, you can have systems statistics on the side of the case, and you can have digital art. I even had Twitter open at the bottom part of the shroud. Since this is not controlled by some sort of application, and it’s not limited to any particular application, you can really put anything you want on it since its just a second display.
I really wanted to see if I could actually game on this thing. Now the transparency effect does not help with clarity of the image, but if I open the side panel facing a white wall that’s how we get the usable display out of this thing. The viewing angles are pretty terrible and the resolution is a bit low, but it works and runs at 60Hz. In CS:GO for example, I get tunnel vision because of the aspect ratio, but as iBUYPOWER intended its usage should focus on displaying cool graphics on the side of your case and not really venturing or using this thing as a gaming display. Of course, unless you have some fun with it like playing Tetris or maybe other 2D games, but in its normal state it’s kind of hard to make out the details of the visuals unless you have the side panel actually open and facing a white wall. Ultimately, gaming on this thing is not recommended, but there are lots of abstract ideas that you can display on the side of the case and that is actually pretty awesome.
And so now a little bit more about the actual case. The exterior is glass, plastic, and steel, and has some color variations between the white between the materials. The front panel has a see-through section to reveal the fans and the magnetic dust filter. This is the same spaced-out panel as we saw with the S340, so you better populate the top fan for exhaust in order to improve temperatures. A dust filter is included for this area as well. The I/O unfortunately does not include a USB Type-C port, I guess this is expected since the Element case was first launched in 2018. All three fans have built-in white illumination, but the two front fans are powered by a Molex splitter that is complete garbage and would not power up one of the fans. I would throw this thing out to avoid any headaches.
Two PCI slot covers are missing, but with thumbscrews in place, and this is intentional since a GPU will occupy that space anyway. The interior is almost identical to the original S340, with the cable bar, two SSD caddies on top of the shroud, ATX motherboard support, and a few additives. The first strange inclusion is the plastic fan shroud behind front fans. We normally see this in front panels to eliminate noise, but here it’s a massive airflow choke for the sake of aesthetics. It’s here to prevent fan illumination from shining behind the LCD panel and making that whole thing look horrible, but why not just include standard black fans instead to improve/protect the display’s better performance? I don’t know.
The second additive is the LCD display module installed in one of the PCI slots. Now iBUYPOWER does not recommend removing the side panel during assembly, as the cable connecting the two is long enough to swivel the side panel to its maximum position with the case lying down. Next you must connect the LCD with the included DVI-to-DP cable into your graphics card for it to show up as a secondary monitor.
Having said all that, the TN LCD on my model has application imperfections that are visible, and also large particles between the LCD and the glass. It’s not a high-end product which is why the original price of $299 USD is absolutely insane.
I can definitely see iterations of this design becoming a bit more popular in the future. For example, at CES we saw Corsair’s Capellix LED film applied on tempered glass, and it looked really awesome. With higher density LEDs the future of case customization is going to be pretty unique.
In conclusion, when it comes to an LCD on the side of the panel of the case, I’m not sure I’m convinced. I’m definitely not the target audience for this enclosure. While it’s not something for me, if you love the idea of an LCD on the side panel, what would you display? I’m interested to read all your suggestions and creative comments.