3.2 tft lcd datasheet quotation

As an option, you can order this TFT pre-assembled onto a breakout/carrier board. The board allows easy prototyping through its 0.1" headers. You can also include the carrier board in your end product to simplify construction and assembly. The carrier board contains a constant-current switching LED driver. The PCB is sized to fit neatly within the outline of the display.

This kit consists of a CFAF240320A-032T TFT LCD module mounted on a carrier board. The carrier board supports a current driver for the LED backlight of the display. It is also available under Additional Options on the website page for CFAF240320A-032T.

3.2 tft lcd datasheet quotation

TFT LCD Modules: One of the most popular sizes in our line of TFTs, this true-to-life full color display has a 3.2-inch diagonal active area. The high density graphic TFT (240x320 pixels) renders your images with good detail where space is limited.

A single 40 pin, 0.5mm pitch FPC makes all the connections to the display, including the white LCD backlight. Standard ZIF mating connectors such as 609-1200-1-ND or 609-1195-1-ND from Digi-Key can easily be mounted to your PCB.

A detailed datasheet and 16-bit sample code are available to download under the Datasheets & Files tab below. As we do for all of our displays, we offer superior customer service and technical support.

3.2 tft lcd datasheet quotation

※ Price Increase NotificationThe TFT glass cell makers such as Tianma,Hanstar,BOE,Innolux has reduced or stopped the production of small and medium-sized tft glass cell from August-2020 due to the low profit and focus on the size of LCD TV,Tablet PC and Smart Phone .It results the glass cell price in the market is extremely high,and the same situation happens in IC industry.We deeply regret that rapidly rising costs for glass cell and controller IC necessitate our raising the price of tft display.We have made every attempt to avoid the increase, we could accept no profit from the beginning,but the price is going up frequently ,we"re now losing a lot of money. We have no choice if we want to survive. There is no certain answer for when the price would go back to the normal.We guess it will take at least 6 months until these glass cell and semiconductor manufacturing companies recover the production schedule. (Mar-03-2021)

ER-TFT032-2 is 240x320 dots 3.2 " color tft lcd module display with ILI9320 controller and optional 4-wire resistive touch panel,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports 8080 16-bit parallel interface. .FPC is soldering type,there is no need for zif connector.Lanscape mode is also available.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

3.2 tft lcd datasheet quotation

SainSmart 3.2" TFT LCD Display is a LCD touch screen module. It has 40pins interface and SD card and Flash reader design. It is a powerful and mutilfunctional module for your project.The Screen include a controller SSD1289, it"s a support 8/16bit data interface , easy to drive by many MCU like STM32 ,AVR and 8051. It is designed with a touch controller in it . The touch IC is ADS7843 , and touch interface is included in the 40 pins breakout. It is the version of product only with touch screen and touch controller.

3.2"" TFT LCD module with 40 IO, it is more than a LCD module and colleagues also includes an SD card slot, whether with touch function. (Here we are with touch screen function module)

3.2 tft lcd datasheet quotation

It is best to use PWM for backlight control. For prototyping, the LED backlight anode pin needs to be driven by a 5 Volt supply and each individual LED cathode needs a current limiting resistor. You can use a lower anode voltage than 5V, but you will need to calculate a new resistor value. The backlight LED voltage drop is about 3.2 Volts and varies with temperature.

3.2 tft lcd datasheet quotation

The Armadillo-43(T) is a complete Linux based computer display module with built-in 24bit colour 480×272 resolution TFT LCD display, and features a Resistive Touch display (Armadillo-43T), or non-touch display (Armadillo-43) on special request (please contact our sales department for this).

The uLCD-32PTU is a compact and cost effective Intelligent Display Module packed with plenty of features, ready to become the GUI for your target application, and capable of being an interface controller for a number of applications.

The 4DPi-32 is a 3.2” 320×240 Primary Display for the Raspberry Pi, which plugs directly on top of a Raspberry Pi and displays the primary output which is normally sent to the HDMI or Composite output. It features an integrated Resistive Touch panel, enabling the 4DPi-32 to function with the Raspberry Pi without the need for a mouse.

An extensive range of hardware and software peripherals have been integrated into the design, to give the user freedom to adapt the module to suit almost any application. Features include; a 4.3″ TFT 480×272 touch screen display, audio, micro-SD card connector, an expansion port along with a series of GPIO, I2C, SPI, and UART serial comms.

The uLCD-43DT-PI is a Raspberry Pi Display Module Pack, which includes a uLCD-43DT 4.3″ Resistive Touch LCD Display with Resistive Touch, a 4D Serial Pi Adaptor and 5 way interface cable.

The uLCD-43DT-PI includes a 4D Serial Pi Adaptor which easily interfaces the uLCD-43DT Display with the Raspberry Pi, to provide a quick and easy interface without any wiring hassles.

This 4D Systems Display Module Pack for the Arduino (and variants) is made up of a uLCD-70DT 7.0″ TFT LCD Display Module with Resistive Touch, a 4D Serial Pi Adaptor and a 5 way interface cable, for quick and easy connection to a Raspberry Pi.

This 4D Systems Display Module Pack for the Arduino (and variants) is made up of a uLCD-70DT Display Module and an 4D Arduino Adaptor Shield to easily connect an Arduino to the 4D Systems Display.