lcd panel cost environment quotation

The term ‘flat screen’ applies to a wide range of TV types, from LCDs to the latest 4K and Smart models. A flat screen means the TV’s screen surface is flat rather than convex like older models. There can be several different types of flat-screen TVs, from older LCD to the newest Smart and 4K TVs. The type impacts the repair costs because more advanced and expensive TVs have more costly components to replace or fix. In addition, some TV repairs may not always be possible on that type. For example, it is not possible to replace the screen on a plasma TV if it cracks and begins to leak. The table below shows common television types and average repair costs for each:

Repairs for LCD TVs cost between $60 and $400. LCD televisions are one of the most popular options on the market, available in a wide range of sizes and styles. They use an LCD (liquid crystal display) with backlights to produce images. The backlights, screen, and other components may get damaged over time and need repairing.

LED TV repairs range from $60 to $400, depending on the scale of the problem. LED televisions are a specific type of LCD TV that use LED backlights to illuminate the liquid crystal display. These TVs usually produce more colorful and vibrant images and are more energy-efficient, but the LED backlights may need to be repaired or replaced over time.

4K TV repairs range from $100 to $275. A 4K television provides some of the clearest and most detailed images because of the very high resolution of its screen, providing more engaging viewing experiences. There are different types of 4K TVs, including some that use LED and others that use OLED. Basically, a television is considered 4K if it has ultra high definition. These models can be expensive to purchase and repair, but in many cases, repairs may not be possible on these units. So, their overall repair costs may be lower simply because some repairs may not be offered.

OLED TV repairs cost between $100 and $400 on average. They are the next step up from a standard LED TV, with OLED standing for organic light-emitting diodes. OLED televisions can achieve deeper blacks and higher contrast compared to standard LED screens. However, they can be very expensive to purchase and repair.

Smart TV repairs cost between $100 and $400. These TVs have Smart technology and connect with your home’s WiFi network to download updates and access apps and the internet. They are more advanced than other TVs but still have various components that can break and require repairs. Many Smart TVs can have basic components. So even though they may be more expensive to purchase, they are not necessarily the most expensive to repair. That comes down to how the television is made and what makes it Smart.

TVs are made up of various parts and components, all working together to produce lights, colors, pictures, and sounds for your entertainment. Over time, accidents may happen that damage these parts, or they might just wear down over the years through repeated use. The table below shows common TV repairs and the costs for each.

HDMI port repairs for a TV costs between $60 and $250. Sometimes, HDMI ports fall out of position and may simply need to be repositioned. In other cases, one might stop working due to a more serious fault and require technical repair work.

TV speaker repairs range from $75 to $250, depending on the type and damage done to the speaker. Faulty speakers may simply need rewiring or minor adjustments, or they could need to be cleaned or replaced, so the exact costs and amount of work vary.

TV inverter repairs cost between $100 and $200 each. The inverter powers up the backlights for your television, and they can stop working if their capacitors break down. Repairs are made by fitting new capacitors in place.

TV screen repairs cost between $200 and $400, but in many cases, repairing the screen is not possible. Since the screen is usually the most expensive part of the television and one of the most sensitive to impacts and other damage, an expert may advise you to simply buy a new television instead of having it repaired. It is worth getting a diagnosis if the screen issue is not too severe because issues like flashing pixels or distorted colors may be fixable.

TV panel repairs average $200 to $400 in some cases, but some panels cannot be repaired. For this reason, many companies do not offer panel repair. So if your television gets a crack in the panel, you may be better off buying a new unit instead.

Power board repairs cost between $200 and $400. The power supply board allows it to turn on and function, and if it breaks down in any way, it may simply stop turning on. Often, a repairman can replace some of the capacitors and make other adjustments to repair a faulty board, rather than having to replace it entirely.

In some cases, your TV components may not be able to be repaired, or it might be more cost-effective to replace them with new ones. The repair price includes the cost of new parts, plus the labor required to fit them into place and remove the broken components. While some components can be replaced, they may be extremely expensive or cost-prohibitive to do so. This is mainly in the case of panels and screens because they often contain too many parts to replace on their own. The table below shows average costs for a variety of common replacements:

Fuse replacement in a TV costs between $60 and $150 and is one of the easier replacement jobs for a repairman. Glass and ceramic fuses on your TV’s power supply board may blow in certain situations and need replacing. To replace a fuse, the repairman opens the TV to access the power panel and swaps out the fuse.

TV bulb replacement costs average $75 to $200. Bulbs are usually found only in older models of LCD TVs or projection TVs. They are used to illuminate the display so that the picture can be seen. Bulbs are relatively easy to replace, but the material costs are a little higher with bulbs when compared to other components, leading to varied replacement prices from model to model.

TV backlight replacements cost between $100 and $200 on average, depending on the television size and scale and the type and number of lights required. If you have LED lights, parts may be more expensive, leading to higher total costs. Usually when backlight problems occur, the bulbs or diodes are dead and need to be replaced.

Picture tube replacements range from $200 to $300 on average. Picture tubes, also known as cathode ray tubes or CRTs, are only used in older TVs. So, this is not a replacement job you need to worry about with an LED or LCD TV.

HDMI port replacement on a TV costs between $200 and $300. Damaged or broken ports may simply stop working or be incompatible with certain HDMI cables. In this case, a new port must be fitted and connected to the circuit board, requiring a couple of hours of labor.

TV screen replacement costs at least $400 to $1,000 and often much more. The screen is the most expensive part of a TV. So usually, the cost of replacing it is higher than just buying a new unit. In some cases, this is because the screen cannot be replaced without also replacing most of the other components, particularly for TVs like LED, LCD, or plasma. Most professional repair companies do not offer screen or panel replacement as a service.

TV panel replacement costs a minimum of $400 to $5,000 and often a lot more on some of the high-end 4K and Smart screen displays. Because the cost of a replacement panel is so high, it is usually more cost-effective to simply purchase a new television. Like the screen, this is due to the number of components involved. Therefore, most repair places will not offer panel replacement as a service.

You might not know exactly which part of your TV is broken or damaged at first. The symptoms of a broken television vary from vertical colored lines across the screen to audio issues, power problems, and even situations where the television starts normally but then turns itself off. For this reason, most repairs start with a diagnostic so that the problem can be found and a plan made for repair. For some repairs to be made, the part will need to be replaced, while in other cases, repair or replacement of that part may not be possible. The table below shows common problems and average repair costs for each.

Repairing a TV that will not turn on costs between $60 and $400 because there are many potential causes. It might be something as simple as a blown fuse, which can be replaced quite cheaply. Or, it could be a motherboard or power supply issue, which is more costly to fix.

Repairs for this problem cost between $100 and $200. If your TV’s picture appears for a moment and then vanishes, it is most likely an issue with the inverter. A repairman will open it up, diagnose the issue, and decide on the most efficient solution.

Repairing horizontal lines on your TV costs between $150 and $400. It might be an issue with the motherboard, or it could be a problem with loose cables between the panel and the control board. To fix this issue, the television needs to be opened up and analyzed by a professional repairman.

Repairing a cracked TV screen costs from $400 to $1,000 or even more. Cracked screens cannot be repaired, they can only be replaced, and they are very expensive, sometimes exceeding the cost of a new TV. For this reason, if you have a cracked screen, it will probably have to be replaced entirely.

There are many different brands and companies that make TVs. Some brands specialize in certain types, while others make a wider range of products. It is common for the brand to impact the cost of repair because there may be specific issues or costs related to that brand.

While you may choose a specific brand based on the technology, cost, or resolution, keep in mind that brands may also have varying costs for repairs and the repairs types that may be available. Regardless of brand, most TV repairs fall between $60 and $400, although some repairs may be higher.

The cost to fix a Philips TV is $60 to $100. The typical issue with Philips televisions seems to be that they have a mind of their own. They turn on and off and sign in and out of apps randomly. While a solution doesn’t seem to be forthcoming, Philips is steadily losing customers due to a firmware problem.

Fixing a Sony TV will cost you about $60 to $400. This popular brand has a reputation for simply becoming disabled with no power or sound. Unfortunately, the customer service at Sony isn’t always the best. Customers are often frustrated when it comes to warranty work.

Some of the most common issues with this brand are banding at a repair cost of $100 to $200 or sound with a cost of $150 to $400. Color problems may be related to adjustment and can be fixed for a low cost of $75 to $100, HDMI connections are often fixed at the cost of $200 to $300, and streaming problems may be corrected with a software update. Software updates can be done by the owner, but a repairman will most likely charge a minimum fee of $75 to $100. Banding presents as sections of bands where it should be smooth. Sound and color can go out over time in the LG brand. HDMI and streaming can become difficult as technology emerges and changes.

Hisense TVs have a history of display difficulties and could cost you about $100 to $200. Typically, it means you need a new inverter, or it could signal the beginning of the end for your Hisense television.

Panasonic TV owners often experience the power clicking on and off and may need a new main board at the cost of $200 to $400. The reset button may help. The repairman will need to replace the motherboard of the TV if that fails.

The Vizio TV is known for its screen of death (a blank or black screen) and usually costs about $200 to $400. The problem is most often a blown motherboard, and replacement is the only option. A factory reset may be a solution. If that doesn"t work, the motherboard is the best possible answer.

Labor costs for TV repair vary depending on whether you have the television repaired in your home or drop it off at a repair center. Having someone come to your home will have higher costs than taking it to a technician.

A television repair technician has earned a career certificate or Associate’s degree in electronics technology or a related field. Expect to pay between $40 and $60 per hour in labor for someone to fix your television. Some technicians have minimum costs for some repairs, particularly if they travel to you. In this case, you may find that even if the repair only takes an hour, you may need to pay a minimum of two hours of work.

Most technicians charge you a diagnostic fee upfront. This fee is for determining what the problem is and can run between $75 and $150. The cost is often waived if you allow the shop’s technicians to make the repairs for you.

Often, you must decide whether it is worth repairing your TV because in many situations, the cost of repairs is higher than the price of a new TV. For example, when screens are cracked or damaged, the cost of replacing a panel is usually much higher than simply buying a new TV.

Consumer Reports recommends replacing electronics whenever the cost of repairs equals or exceeds half the cost of a new purchase. It is also recommended that you replace your television if the new version is less than $200, or if your screen is smaller than 32”. For example, it costs around $150 for a new motherboard in an LG Model 24LF452B 24” TV, which takes around one hour to repair. As a result, you would pay between $190 and $210 to repair your old set, while it is possible to purchase a new one for less.

If you invested a lot of money in your television, the costs of repairing an inverter or getting new backlights may be far cheaper than replacing it. This is why it is often best to ask a professional to diagnose the problem and give you a quote for the repair work. Then, you can compare the price of repairs against the cost of a new TV and decide what makes sense. If your TV breaks down repeatedly, you have multiple repair bills over the course of a year. It might be time for a new television even if a single repair does not seem too expensive.

Additional Considerations and CostsDIY. In some cases, television repair can be performed as a DIY project. There are numerous how-to videos available that are easy to watch and understand. Parts for most sets are also available online. However, if you are not comfortable with the process, always call a technician rather than attempting the repair yourself.

Warranty. When purchasing a new television, buying an extended warranty can spare you the unwanted expense of repair bills in some cases. An extended warranty is largely based on the price of your television. Expect to spend between 10 and 20 percent of your set’s cost on an extended warranty to help cover damage. Ordinary warranties only cover manufacturer’s defects and, therefore, cannot be used to pay for damage due to neglect or accidents.

In-shop repairs. In-shop TV repair services may involve a pick-up and delivery charge if you do not take it in yourself. While some may do this for free, others charge between $40 and $75 to pick-up and deliver the TV back to you. Additionally, customers that live in rural areas may have to ship the television. If you do this, make sure you obtain a tracking number and proof of delivery. The repair service will contact you with the list of recommended repairs and the cost and request a debit or credit card to pay for the repairs before completing them.

Television repair costs vary widely, but the average consumer pays between $100 and $300. Prices depend on the make, model, and size of your set, as well as the availability of parts. It is generally more expensive to repair an older model than it would be to replace it. New televisions are becoming more affordable every year, but the price of parts remains steady or even increases as older parts become rarer.Can a flat-screen TV be fixed?

Not all TV screens can be fixed or replaced. Certain types have components behind the screen that can be damaged by its removal. However, if you choose to proceed, remove all external cables, unplug your set, and lay it face down on a flat, soft surface. Remove any screws holding the frame in place and then gently remove the frame and set it aside. Put your new screen in place and reconnect the internal cables in the same manner you disconnected them. It is usually best to get a professional to handle TV repairs, and the cost of replacement screens is often very high. So, it may be more cost-effective to get a new TV.How many years will a flat-screen TV last?

The use of liquid crystal displays (LCDs) in user interface assemblies is widespread across nearly all industries, locations, and operating environments. Over the last 20 years, the cost of LCD displays has significantly dropped, allowing for this technology to be incorporated into many of the everyday devices we rely on.

The odds are high you are reading this blog post on a laptop or tablet, and it’s likely the actual screen uses LCD technology to render the image onto a low-profile pane of glass. Reach into your pocket. Yes, that smartphone likely uses LCD technology for the screen. As you enter your car, does your dashboard come alive with a complex user interface? What about the menu at your favorite local drive-thru restaurant? These are some everyday examples of the widespread use of LCD technology.

But did you know that the U.S. military is using LCD displays to improve the ability of our warfighters to interact with their equipment? In hospitals around the world, lifesaving medical devices are monitored and controlled by an LCD touchscreen interface. Maritime GPS and navigation systems provide real-time location, heading, and speed information to captains while on the high seas. It’s clear that people’s lives depend on these devices operating in a range of environments.

As the use of LCDs continues to expand, and larger screen sizes become even less expensive, one inherent flaw of LCDs remains: LCD pixels behave poorly at low temperatures. For some applications, LCD displays will not operate whatsoever at low temperatures. This is important because for mil-aero applications, outdoor consumer products, automobiles, or anywhere the temperature is below freezing, the LCD crystal’s performance will begin to deteriorate. If the LCD display exhibits poor color viewing, sluggish resolution, or even worse, permanently damaged pixels, this will limit the ability to use LCD technologies in frigid environments. To address this, there are several design measures that can be explored to minimize the impact of low temperatures on LCDs.

Most LCD displays utilize pixels known as TFT (Thin-Film-Transistor) Color Liquid Crystals, which are the backbone to the billions of LCD screens in use today. Since the individual pixels utilize a fluid-like crystal material as the ambient temperature is reduced, this fluid will become more viscous compromising performance. For many LCD displays, temperatures below 0°C represent the point where performance degrades.

Have you tried to use your smartphone while skiing or ice fishing? What about those of you living in the northern latitudes - have you accidently left your phone in your car overnight where the temperatures drop well below freezing? You may have noticed a sluggish screen response, poor contrast with certain colors, or even worse permanent damage to your screen. While this is normal, it’s certainly a nuisance. As a design engineer, the goal is to select an LCD technology that offers the best performance at the desired temperature range. If your LCD display is required to operate at temperatures below freezing, review the manufacturer’s data sheets for both the operating and storage temperature ranges. Listed below are two different off-the-shelf LCD displays, each with different temperature ratings. It should be noted that there are limited options for off-the-shelf displays with resilience to extreme low temperatures.

For many military applications, in order to comply with the various mil standards a product must be rated for -30°C operational temperature and -51°C storage temperature. The question remains: how can you operate an LCD display at -30°C if the product is only rated for -20°C operating temperature? The answer is to use a heat source to raise the display temperature to an acceptable range. If there is an adjacent motor or another device that generates heat, this alone may be enough to warm the display. If not, a dedicated low-profile heater is an excellent option to consider.

Made of an etched layer of steel and enveloped in an electrically insulating material, a flat flexible polyimide heater is an excellent option where space and power are limited. These devices behave as resistive heaters and can operate off a wide range of voltages all the way up to 120V. These heaters can also function with both AC and DC power sources. Their heat output is typically characterized by watts per unit area and must be sized to the product specifications. These heaters can also be affixed with a pressure sensitive adhesive on the rear, allowing them to be “glued” to any surface. The flying leads off the heater can be further customized to support any type of custom interconnect. A full-service manufacturing partner like Epec can help develop a custom solution for any LCD application that requires a custom low-profile heater.

With no thermal mass to dissipate the heat, polyimide heaters can reach temperatures in excess of 100°C in less than a few minutes of operation. Incorporating a heater by itself is not enough to manage the low temperature effects on an LCD display. What if the heater is improperly sized and damages the LCD display? What happens if the heater remains on too long and damages other components in your system? Just like the thermostat in your home, it’s important to incorporate a real-temp temperature sensing feedback loop to control the on/off function of the heater.

The first step is to select temperature sensors that can be affixed to the display while being small enough to fit within a restricted envelope. Thermistors, thermocouples, or RTDs are all options to consider since they represent relatively low-cost and high-reliability ways to measure the display’s surface temperature. These types of sensors also provide an electrical output that can be calibrated for the desired temperature range.

Another important consideration when selecting a temperature sensor is how to mount the individual sensors onto the display. Most LCD displays are designed with a sheet metal backer that serves as an ideal surface to mount the temperature sensors. There are several types of thermally conductive epoxies that provide a robust and cost-effective way to affix the delicate items onto the display. Since there are several types of epoxies to choose from, it’s important to use a compound with the appropriate working life and cure time.

For example, if you are kitting 20 LCD displays and the working life of the thermal epoxy is 8 minutes, you may find yourself struggling to complete the project before the epoxy begins to harden.

Before building any type of prototype LCD heater assembly, it’s important to carefully study the heat transfer of the system. Heat will be generated by the flexible polyimide heater and then will transfer to the LCD display and other parts of the system. Although heat will radiate, convect, and be conducted away from the heater, the primary type of heat transfer will be through conduction. This is important because if your heater is touching a large heat sink (ex. aluminum chassis), this will impact the ability of the heater to warm your LCD display as heat will be drawn toward the heat sink.

Before freezing the design (no pun intended) on any project that requires an LCD display to operate at low temperatures, it’s critical to perform low temperature first. This type of testing usually involves a thermal chamber, a way to operate the system, and a means to measure the temperature vs time. Most thermal chambers provide an access port or other means to snake wires into the chamber without compromising performance. This way, power can be supplied to the heater and display, while data can be captured from the temperature sensors.

The first objective of the low-temperature testing is to determine the actual effects of cold exposure on the LCD display itself. Does the LCD display function at cold? Are certain colors more impacted by the cold than others? How sluggish is the screen? Does the LCD display performance improve once the system is returned to ambient conditions? These are all significant and appropriate questions and nearly impossible to answer without actual testing.

As LCD displays continue to be a critical part of our society, their use will become even more widespread. Costs will continue to decrease with larger and larger screens being launched into production every year. This means there will be more applications that require their operation in extreme environments, including the low-temperature regions of the world. By incorporating design measures to mitigate the effects of cold on LCD displays, they can be used virtually anywhere. But this doesn’t come easy. Engineers must understand the design limitations and ways to address the overarching design challenges.

A full-service manufacturing partner like Epec offers a high-value solution to be able to design, develop, and manufacture systems that push the limits of off-the-shelf hardware like LCD displays. This fact helps lower the effective program cost and decreases the time to market for any high-risk development project.

These rugged LCD innovations continue to prove indispensable as the military continues its development of on-the-move intelligence systems, threat detection, surveillance and suppression operations. Therefore, every General Digital military-grade LCD monitor and ruggedized peripheral can be customized to meet the rigorous demands presented in the modern warfare theater.

General Digital"s reputation for going above and beyond military standards means we utilize in-house equipment for engineering, design, testing and validation of all of our rugged LCD displays.

Quality control inspection is performed on 100% of all General Digital’s manufactured products, not on a sample lot. This proves invaluable for today"s modern and future war fighter since life and limb depends on equipment that works EVERY time, ALL of the time, regardless of the harsh environment.

General Digital designs and builds in the United States of America, so you know you’re getting robust and dependable flat panel military LCD monitors and accessories. Our monitors will last for years, long after the others have succumbed to the elements. Below is a list of our heavy-duty product line, which will suit just about any requirement you have. And if it doesn’t, we’ll build it for you.

The Saber series consists of standard rack mount, panel mount and standalone/VESA mount military-grade and COTS (Commercial Off-The-Shelf) LCD monitors. Options include sunlight readable displays, LED backlights, NVIS goggle compatibility, touch screens, multiple video inputs and more. The

The TwoView Micro (dual display), SlimLine Micro and Rack Mount Hinge series consist of 1U and 2U high rack mount, flip-up and flip-down military-grade LCD monitors in a rack mount drawer. Options include sunlight readable displays, LED backlights, NVIS goggle compatibility, touch screens, multiple video inputs and more. They have been used in military applications such as:

The TwoView (dual display), SlimLine 1U and SlimLine Lite II series consist of 1U and 2U high rack mount, flip-up military-grade LCD monitors with integral keyboards and trackballs in a rack mount drawer. Options include sunlight readable displays, LED backlights, NVIS goggle compatibility, touch screens, multiple video inputs, keyboards and more. They have been used in military applications such as:

The Barracuda series consists of NEMA 4/6 and IP67 environmentally sealed rack mount, panel mount and standalone/VESA mount military-grade and COTS (Commercial Off-The-Shelf) LCD monitors. Options include sunlight readable displays, LED backlights, NVIS goggle compatibility, touch screens, multiple video inputs and more. The marine-grade

The Impact series consists of an open frame military-grade LCD monitor kit, ready for mounting where you need it. Options include sunlight readable displays, LED backlights, NVIS goggle compatibility, touch screens, multiple video inputs and more. They have been used in military applications such as:

It"s common for stable, liquid assets to record narrow bid-ask spreads in a normal trading environment. However, the pair will usually divert following systemic concerns like geopolitical events or broad market downturns. The onset of volatility and uncertainty moves the supply and demand mechanisms undermining quotations into flux.

Quotations represent two pieces of information for most asset classes: the price an investor would need to pay to purchase an asset at a particular moment in time (the lowest price "asked" by sellers) and the price an investor would receive for the same asset if they sold it at the same time (the highest "bid" by potential buyers). Together, the difference between the two represents the liquidity cost an investor incurs when trading an asset since they must buy at the bid price and sell at the asking price.

Bonds are quoted at a par value of $1,000, and the price is quoted as the percentage of its par value, which is then converted to a point scale. For example, if a corporate bond is quoted at 97, then that means it is trading at 97% of face value, meaning the actual cost to buy the bond is $970.

Par value, also known as nominal value or face value, is often converted to a numeric value and multiplied by 10 to determine a bond"s cost. A par value is a term used for investments that means original value.

a line of extreme and ultra-narrow bezel LCD displays that provides a video wall solution for demanding requirements of 24x7 mission-critical applications and high ambient light environments

The South Korean flat-screen maker would likely see much faster-than-expected panel price gains in the third quarter, with PC screen prices already up 10 percent in July, said Davis Lee, vice-president in charge of marketing for PC monitor and notebook panels.

Lee said he expected the liquid crystal display (LCD) industry to continue to experience a shortage in glass substrates through September, but added that LG Display was working to minimise the impact.

LG Display, the world’s biggest supplier of notebook screens, expected its share of the fast-growing netbook panel market to reach more than 30 percent next year from a low-20s percentage currently, Lee said.

SEOUL (Reuters) - Liquid-crystal display (LCD) screens were expected to slowly fade and die, giving way to lighter, thinner and tougher organic light-emitting diode (OLED) panels in everything from smartphones to televisions.A man watches Sharp"s television sets at an electronic shop in Tokyo in this March 19, 2012 file photo. REUTERS/Kim Kyung-Hoon/Files

But LCD is refusing to go quietly as its picture quality keeps getting better. At the same time, the major backers of credit card-thin OLED panels - led by Samsung Electronics Coand LG Electronics Inc- are struggling to make the technology cheap enough to mass produce. The two South Korean firms this year showcased 55-inch (140 cm) OLED TVs, but priced at around $10,000 (6,220 pounds) - 10 times that of an LCD equivalent - they have yet to reach store shelves.

OLED displays, used on Samsung’s Galaxy S and Note smartphones, have been touted as the future display model to replace LCDs across the consumer electronics spectrum - from TVs to computers, laptops, tablets and smartphones. OLED is more energy efficient and offers higher contrast images than LCD, and is so thin that future mobile devices will be unbreakable, and will be able to be folded or rolled up like a newspaper.

But OLED panel makers such as Samsung Display and LG Displayhave yet to address major manufacturing challenges to lower costs to compete against LCD panels.

At the same time, LCD panels, which are used on 9 of every 10 television sets, are still evolving and show no sign of giving way in this latest battle to set the global standard - less than a decade since LCD effectively killed off plasma screens.

“OLED still has a long way to go to become a mainstream display, as it has to become bigger and improve picture quality,” said Chung Won-seok, an analyst at HI Investment & Securities. “The use of OLEDs will continue to be confined to small displays at least for the next 2-3 years. Its usage as a mainstream TV panel is only likely in 2014, but even then there’s a possibility of intense competition with LCD TVs as that technology keeps improving.”

Far from fading, LCD panels now offer better picture quality - up to four times better than OLED - and use less power, creating robust demand from smartphone and tablet makers.

As has often been the case, Apple Incmoved the goalposts by upgrading the display resolution for its iPhone and iPad, still the high-end LCD market"s gold standard, prompting rivals to upgrade their display panel qualifications. Analysts at Macquarie predict Apple will adopt high-resolution screens for the MacBook Air and iMac monitor next year, accelerating the industry"s shift to high-resolution displays.

"The pixel war is an absolute bonanza for LCD makers," said Kim Byung-ki, analyst at Kiwoom Securities. "Manufacturers from LG Display to Samsung, Sharp Corp, AU Optronics Corpand Chimei (Innolux)all will gradually convert their traditional lines into more high-end product fabs, and that will curtail supply and boost profitability."

These higher-resolution panels cost more than double the commodity-type LCD screens, boosting panel producers’ profits. Even Samsung, the standard bearer for OLED panels and also a major LCD manufacturer, is actively promoting LCD screens for tablets and laptops over OLED, said a person familiar with the matter, who was not authorised to talk to the media so didn’t want to be named.

Both Sony and LG Electronics now sell ultra HD (high definition) LCD sets that boast four times the picture quality of HD TVs. The two firms, which are selling 84-inch TVs, aim to reduce that size to cater for more popular smaller sets.

To squeeze more pixels per inch, panel makers are upgrading their thin-film transistor (TFT) panel production facilities to new IGZO or LTPS processing technologies that require almost twice as many processing steps and which suffer higher faulty product rates and lost output.

Japan’s Sharp is the frontrunner in IGZO technology, which uses indium gallium zinc oxide instead of amorphous silicon, in panel manufacturing. LG Display, a major supplier to Apple, is investing 1.2 trillion won ($1.1 billion) by end-2013 in its production of low-temperature poly silicon (LTPS) panels - a technology used to make screens for the iPhone and iPad.

While new technologies can be game-changers, these panels are not simple to produce, limiting availability and driving up manufacturing costs. Some warn of an LCD supply shortage.

“The LCD industry is improving more strongly than expected and panels are likely to be in short supply from 2013, as manufacturers upgrade their lines to increase high-end products. This requires more processing time and steps, reducing total output,” said Kim Dong-won, an analyst at Hyundai Securities.

As LCD prospects improve, LG Display, the world’s top LCD maker, swung to a quarterly profit in July-September, ending a run of seven straight quarterly losses.

As the global TV market is forecast to shrink 1-2 percent next year, panel makers with higher exposure to the booming mobile markets will lead a recovery, say analysts, though some caution that shares may be rising too fast.

We offers wide range of solution using Industrial LED Display Boards that are designed based in the government norms. Environment Statistics Display Board is one such solution offered by Compucare for manufacturing industries that produce hazardous substance that are harmful to the environment.

Industry shall have the display on-line data outside the main factory gate with regard to quantity and nature of hazardous chemicals being handled in the plant, including waste water and air emissions and solid hazardous waster generated within the factory premises.We offers wide range of solution using Industrial LED Display Boards that are designed based in the government norms. Environment Statistics Display Board is one such solution offered by Compucare for manufacturing industries that produce hazardous substance that are harmful to the environment.

We offers wide range of solution using Industrial LED Display Boards that are designed based in the government norms. Environment Statistics Display Board is one such solution offered by Compucare for manufacturing industries that produce hazardous substance that are harmful to the environment.

No native resolution. Currently, the only display technology capable of multi-syncing (displaying different resolutions and refresh rates without the need for scaling).Display lag is extremely low due to its nature, which does not have the ability to store image data before output, unlike LCDs, plasma displays and OLED displays.

The era of sustainability is already a reality, and our Smart City LED display solutions bring us closer to a smart city concept in a very simple way. With Visual Led’s LED screens and panels, you can provide quality and useful information to citizens in a simple way and without spending on traditional media like printing on vinyls or paper.