cleaning a lcd screen made in china

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Remember when your LCD or OLED display had that brand-new, fresh-out-of-the-box shine, feel and look? You are in the right place if your display is now due for deep cleaning.

Things to consider before cleaning or handling an electronic displayAvoid static by grounding your body and following proper ESD-safe handling techniques.

A microfiber cloth and distilled water is recommended for cleaning the display glass. Use Qtips and Isopropyl alcohol for cleaning the printed circuit board.

Although distilled water is recommended for wiping the display glass, you can use a cleanser developed explicitly for cleaning displays. However, do not spray it directly onto the display. Spray a tiny amount of the cleaner onto a microfiber cloth first to avoid getting any cleaning solution inside the display.Never spray any liquids directly onto the display.A spray is too hard to control and confine. The fluids can seep into the other display layers or surrounding components and cause irreversible liquid damage.

Only use a microfiber cloth and don"t use chemicals to clean a resistive touchscreen.Disconnect the display from the power supply and remove any screen protectors or liners.

Isopropyl alcohol (IPA) is widely used to clean printed circuit boards (PCBs). Use a Q-tip or soft small bristle brush for scrubbing a PCB, and never use a paintbrush.Gently rub a Q-tip in Isopropyl alcohol.

Cleaning soldering residue on LCD with Isopropyl alcohol and a Q-Tip.Cleaning residue around soldering elements is not necessary if Newhaven Display performed the soldering.

Cleaning your electronic display is a simple task. However, it is essential to consider these steps to handle and clean it properly. You should now have a better understanding of what cleaning products are safe to use, how to clean the display screen glass, how to clean touchscreens and how to clean soldering residue.

Responsible for performing installations and repairs (motors, starters, fuses, electrical power to machine etc.) for industrial equipment and machines in order to support the achievement of Nelson-Miller’s business goals and objectives:

• Perform highly diversified duties to install and maintain electrical apparatus on production machines and any other facility equipment (Screen Print, Punch Press, Steel Rule Die, Automated Machines, Turret, Laser Cutting Machines, etc.).

• Provide electrical emergency/unscheduled diagnostics, repairs of production equipment during production and performs scheduled electrical maintenance repairs of production equipment during machine service.

Responsible for performing installations and repairs (motors, starters, fuses, electrical power to machine etc.) for industrial equipment and machines in order to support the achievement of Nelson-Miller’s business goals and objectives:

• Perform highly diversified duties to install and maintain electrical apparatus on production machines and any other facility equipment (Screen Print, Punch Press, Steel Rule Die, Automated Machines, Turret, Laser Cutting Machines, etc.).

• Provide electrical emergency/unscheduled diagnostics, repairs of production equipment during production and performs scheduled electrical maintenance repairs of production equipment during machine service.

What can be better after a long day’s work than lying down on a sofa watching TV? The television can become our best friend to relieve the pressure from work, relationships, and annoying relatives. LCD TV displays as added “member” of the family also need to be taken care of. For this reason, it is recommended to regularly clean the LCD screen as dust and dirt may affect its performance. What we are trying to say is that if the television is too dirty, you won’t be enjoying your favorite program. Trust me! you do not want that…

How can we clean the LCD Display? This is a concern for many people. Before we find out the answer, we need to know what to avoid. Here, please do not take out your t-shirt and wipe the screen from those beer stains, calm down, and hear me out. Many people would easily make mistakes in solving this problem even without consciousness. So let’s take a look at some wrong cleaning methods first: Wiping the LCD Screen directly with the palm or fingers

You should know that LCD should not be touched. When rubbing with the palm or fingers, it is difficult to use the right amount of force. If the force is too strong, it may cause permanent damage to the liquid crystal molecules, which translate into watching at a multicolor liquid stain on your TV instead of your favorite show. Wipe the LCD screen with a rough towel

Someone may directly clean the LCD display with the towel used to wipe the table at home. However, this is a wrong behavior as you can scratch the surface or get the screen even dirtier. Do not also use paper towels, toilet paper, or old T-shirts. These materials are abrasive and leave a lot of residues.

Now that we know what we should not do, let us move with the proper cleaning methods. First of all, let us briefly explain the LCD TV display structure. The LCD panel is mainly composed of two sodium-free glass sandwiched by a polarizer, a liquid crystal layer, and a color filter. Feeling confused? check here our article about LCD TVdisplays.

Moving on to the cleaning. Well, the first thing you should do is to turn off your television. I know it seems obvious to say, but many people do not follow this step. After that, you have two main choices: standard or creative method:

The first being the standard option, is the most formal and troublesome. Stand up and go out buying the special LCD cleaner and microfiber cloth to clean the LCD screen. If you are too lazy, you can order it online. Although this method is effective, it implies that you need to buy the cleaning agent and my friend, depending on how regularly you clean, it can be expensive. Once bought the products, apply the cleaning agent to the cloth and gently wipe the entire surface of the LCD TV display, removing any visible traces of dirt and dust.

If you thought it was too easy after hearing the standard option, or those nasty stains are still there, we have the solution for you. Here we share the “creative” method.

Prepare a liquid solution using equal amounts of vinegar and water. Vinegar is a natural and safe detergent and is much cheaper than the products on the market, specially designed for cleaning televisions.

Dampen the microfiber cloth in the vinegar and water solution and then wipe your TV screen softly. If necessary, apply gentle pressure and a circular motion to the spots where you notice stubborn stains. Keep in mind not to spray the vinegar solution directly on the TV screen, as you could damage it irreparably.

Following, use a second microfiber cloth to dry the TV screen. Pay attention not to allow the screen to air dry. Otherwise, annoying halos may remain and influence image quality.

Finally, wash the plastic frame of the TV. If the frame also requires a more intensive cleaning, use some paper towels after wetting it in the vinegar and water solution. Use paper towels to dry it completely.

To better enjoy your LCD TV display, you need to take good care of it. Our team at Aiwa is devoted to developing innovative solutions for visual entertainment with LCD TV, LCD monitors, and other electronic devices. Our product offers a longer life-span and longevity.

Specializes in manufacturing. We have our own independent Brand "QIH". Our own Factory is in GuangDong, China, which has more than 10 years experience in making .We have many different styles, and many of them have been bulkly sold to a lot of countries for many years from our shop .

As a manufacturer, we have our own design team, OEM custom serivce is most welcomed, tell us your personality thoughts about this, then our design team will give you the layout to check. We do sincerely invite you to visit our office, store, warehouses and factory, and looking forward to building a long-term business relationship with each other.

If your screen is still dirty, apply a small amount of 70~75% isopropyl alcohol (IPA) solution to your cloth and gently wipe down the exterior of your screen. Alternatively, you can also use a 70~75% IPA wipe.

Don"t make the mistake of thinking that LCD screens work like your nifty new iPad. In general, touching should be off limits because pressing too hard on the screen can actually break or crack pixels. So the first rule to cleaning an LCD screen is don"t do it unless you have to (i.e. unless it"s actually dirty).

Many retailers offer special cleaning solutions for LCD screens, but the truth is that most of these are made up primarily of water. So, if you don"t want to take the time to go buy a cleaner or you want to save the money (maybe to put toward that "What Not to Wear" dress), you can just make your own LCD cleaner by mixing water with some vinegar or isopropyl alcohol -- the solution should be no more than 50/50.

You could even start with plain water and see if you need the vinegar or alcohol, which will come in handy when you"re trying to wipe away greasy fingerprints. Some people recommend only using distilled water, but regular water works fine, according to Dave Chipman from Sharp.

Unless you want to end up with a melted, discolored, hazy or scratched LCD screen, steer clear of all spray cleaners. In particular, don"t use any solvent cleaners that include acetone, ethyl alcohol, ethyl acid, ammonia or methyl chloride. You also want to avoid using any materials that could potentially scratch the screen"s delicate surface. Opt for a soft, clean, cotton cloth instead of wood-based products like paper towels and tissues. Chipman suggests using a microfiber cloth for best results.

If you"re lucky enough to have a service come in and do your cleaning for you, make sure they don"t inadvertently ruin your television or monitor by trying to clean it with something like glass cleaner. You should either take the time to explain -- and maybe even demonstrate -- how you want your LCD screen cleaned or just ask your cleaner to leave this particular job for you.

Repair guides can be hard to find. I"ve only seen guides for iMac but the general idea is the same. Remove the LCD assembly from the housing, remove the fixture tapes and side frames from the assembly, lift the panel and clean it. It seems that soft cloth is enough to clean the panels. Be aware of additional dust when wiping the panels and wipe gently, you may scarch the panel in the process if not careful enough. Make sure you seal the assembly well to prevent further dust.

It IS a very difficult repair, the assembly is very heavy, maybe more than 2/3 of the unit"s total weight, and it is a fragile piece of art. Several cables and sensors attach to the back side of the panel. You can easily damage them when lifting the LCD. There are many clips locking the frame. Quite tricky to remove. And at last the LCD driver board is connected to the panel by several ribbon cables. You must not tear any one of them or the entire unit is totaled. In conclusion, very challenging to do so.

Television screens are supposed to be clean and free of dirt, dust, or any debris that may blur vision. This is why this component is one of the most vital parts of a Television. Nothing can be worse than straining your eyes to make sense of the pictures your set is projecting. If you do not clean your TV regularly, fingerprint smudges and dust will build up.

Cleaning your LED TV or any type of television for that matter is something you should do at least once every 2 or 3 weeks. In fact, I will suggest that you do it as often as you watch it any paying more attention to the screen when you do so. If you clean your TV set regularly, it will always look brand new, and you will enjoy bright and colorful pictures without said. Bearing that in mind, there are ways to go about a cleaning endeavor. Unfortunately, not everyone knows how to clean a set effectively. Many think that a piece of towel soaked in water will do. How wrong they are. Television screens are very sensitive, so a great deal of care is required to do the job effectively. In addition to that, being careful also protects the screen for damage. Secondly, you need to understand that TV sets are different. Although they all project sounds and images, they are built differently. So, therefore, the approach to cleaning should also be different as well.

The approach to cleaning an LED TV screen, for instance, requires extra care compared to the cleaning of a Tube TV. They both have screens, but the former is more sensitive than the latter due to the sensitivity of LED screens build material. Bearing all this in mind, how do you safely clean an LED TV screen without damaging it in the process. In this article, we will show you safe and intelligent ways to go about it using available and affordable materials. You will also learn a few tips about how to do it safely too.

Before you proceed, you need to bear two things in mind when cleaning LED TV screens. Firstly, you want to do it in such a way and with the right materials that ensure the screen is clean and devoid of dust or stains of any kind. You want your screen to be as bright and clear as possible. Secondly, you want to avoid damaging the screen or reducing its projection quality. This is why it is necessary to use only the right cleaning materials and approach at all times. Now, here are some helpful tips for adopting when cleaning an LED television screen. [/fusion_text]

Every electronic equipment comes with an owner’s manual. This manual provides the user with sufficient information about how to use and maintain the gadget. The same thing goes for LED sets. They come with an owner’s manual too. Before you clean the set, you may want to read the manual first.

In fact, it is advisable that you read it first immediately you buy and install it in your home. By reading the manual, you gain more understanding regarding how to care for the television all through it a lifespan in your home, office, or wherever you install it. For the purpose of cleaning, pay attention to the section that provides information about how to do it effectively.

Reading manuals is important because different television manufacturers provide different approaches to cleaning their sets. What works for an LG LED TV may not work for a Samsung set. That is why it is so important to only follow the recommendation of a one cap fits all approach to cleaning your TV screen. If you read the manual when you bought it, but you have forgotten the cleaning details, consult it once again to refresh your memory.

Before you start the cleaning properly, turn off the television set. Do not stop at that. You also need to unplug it from the power source. Once you have done that, do not start cleaning the screen immediately. Give it time to cool down. The cleaning process may take between 2-5 minutes or even more depend on your LED TV model or how long it was on.

Turning the TV off will cut off power leading to the cooling down of the screen. You don’t want to be cleaning a hot or warm screen, do you? You want to make sure that the screen is as cool as possible and non-reactive to whichever cleaning agent you use.

Another advice to take in that is so important is that you should never use paper towels to clean the screen. There are reasons to avoid paper towels. Paper towels, especially when soaked in water, leave smudges and stains on the screen. No matter how long or how hard you try to wipe the marks off, they yet remain. Paper towels are bad for your TV screen. It’s as simple as that.

To enjoy an ultimate cleaning experience, you should consider using microfiber cleaning pieces. Some people recommend cotton whole because they are more breathable. However, microfiber cloths are more durable. In addition, they do not stick to your screen. Older LED, or LCD screens can’t handle traditional cleaning methods or materials. With microfiber, you can eliminate stains, remove smudges, and fingerprints with ease.

To use microfiber, simply wipe the surface of the screen in a circular motion. Cover as much part of the screen as you possibly can. Work your way around the edges as well. More importantly, when cleaning, avoid touching the screen with your bare hands as doing so will leave fingerprint marks on it.

The use of chemicals should be avoided at all costs. Chemicals damage screens more than you know. That a chemical agent worked on a particular surface is not an indication that it will work well for your TV screen. LED screens are very sensitive and fragile, so you ought to make sure that you keep chemicals as far away as possible. Another material you should never use is a detergent solution (water and detergent).

Soap, scouring powder, was window cleaners, and any other general industrial cleaner should be avoided. Abrasive pads and towels made from paper should not be used either. Using any of these materials will lead to screen scratches, anti-glare coating damage, or permanent screen damage. The sad part is that the damage may not be noticeable at first, but over time, the same will become permanent.

If you must wet your cleaning material with water, do so in little splashes. Avoid spraying the screen directly with water. When wiping the screen, do so gently because it can break if pressed too hard as screens are very fragile.

You will notice that your microfiber cloth cannot reach the edges of the screen like the other areas. If you don’t clean the edges too, dust and first will accumulate in those parts, and after a time removing the stains will love difficult. Furthermore, failure to clean screen edges will lead to an uneven appearance, with poor picture quality being the end result. To clean edges and corners effectively, use cotton swabs to greater effect. For better results, dab the cotton swabs in water. Pick off the dirt carefully by dragging them out using the swabs. Do this for the four corners of the screen.

As for the edges, run the swabs up and down systematically but avoid running them all the way down to the edges as this may drive dirt further on that may be difficult to remove. For better results, use as many cotton swabs as you can.

Unlike an LED TV screen, cleaning a Tube TV is much easier. Tube TV screens are more rugged and can withstand pressure, but doing so carefully is also important. You can use a microfiber cleaning cloth doused in a little water. Never spray the screen directly as this may damage it. Rather, work your way with the microfiber cloth. Apply the same circular cleaning motion like you would do an LED TV screen. Cotton swabs will also come in handy to pick off the dirt from the screen corners.

Dish soap can also be used on LED and LCD screens, albeit with care. Before you use a dish soap solution, first wipe the screen with a dry cloth to remove dust. Now, dip your cleaning cloth in the dish soap solution. Squeeze off the liquid then gently wipe the screen. Make sure you cover every surface area. Once you are done, don’t waste time to clean; otherwise, the solution will dry up on the screen leading to a blurry vision. Rinse the cloth with water to remove soapy residue then take the dry cloth you used to wipe off the dust once again to dry the screen.

Yes, they do. There are actually cleaners specially made for cleaning tv screens. Screen cleaners contain distilled water, isopropyl, and alcohol solutions. If you must use an electronic screen cleaner, make sure you shake to content before use. Also, apply on a limited portion of your cleaning cloth.

Cleaning your TV remote control is part of a general TV cleaning process. So to clean your remote control, follow these tips. Pop-out the batteries:Remove the batteries from the remote. Doing so will create enough room when cleaning the interior casing.

Tap the remote lightly on a hard surface:Remote controls gather a lot of dust and debris along the way. To remove them, tap the remote control on a hard surface like a table. Do this gently and several times to dislodge debris stuck in crevices.

Use a mild disinfectant:Apply a cleaning disinfectant on a piece of cloth and clean the body thoroughly. The use of disinfectant is necessary because our hands carry germs, and we transfer these germs to the remote control anytime we operate it. Clean the whole body thoroughly.

Maintain a weekly timetable:To ensure that your TV set is always clean, make sure you clean it weekly. Add it as part of your to-do list when cleaning your home. If your furniture deserves regular cleaning, so does your television set. Doing regular cleaning will atop dust, debris and fingerprints from smearing the screen. It is also much easier to clean when there is little dust on the surface. Keeping a microfiber cloth close by is also advised so that you can quickly wipe off dust when necessary.

Never spray your LED TVset directly with any substance:Avoid spraying your screen directly with any substance even if it is an electronic cleaning gel. Excessive spraying can damage the cabinet and the structural make-up of the screen. If you must use any cleaning solution, apply it on the napkin or microfiber cloth you are using and gently wipe the screen with it.

Use a Vacuum:To draw out dust and debris hidden in the crevices of the set, use a low suction vacuum. You may also use the vacuum cleaner’s soft brush to remove dust from the cable, vents, and ports of the TV

Adhere strictly to the User Manual:Your LED TV set comes with a user manual for a reason. The manual is meant to guide your use of the device. When cleaning your set, make sure you follow the directives of the manufacturer. Doing it any other way may damage the TV beyond repair.

Avoid strong cleaning agents:Just like we pointed out in the article, avoid strong cleaning agent as not all of them are good for your television’s screen. The screen is very sensitive, so bear this in mind. Some examples of cleaning agents to avoid include unmixed alcohol, ammonia, acetone, and Wax.

Maintaining your LED TV set requires a lot of patience and attention to detail. If you want the screen to remain in good shape, you need to clean it regularly and with proper cleaning materials. If you follow the tips in this article, your screen will remain bright and sharp for as long as you use the set.

TFT-LCD is based on ITO glass as the foundation, a display processing out later, LCD color display device is the best one, especially in the large size of the screen, has incomparable superiority. TFT (Thin Film Transistor) refers to a thin film transistor TFT-LCD thin film transistor LCD, is an active matrix type liquid crystal display. Each liquid crystal pixel is composed of integrated thin film transistor in the pixel back to drive, is an active pixel, so not only the speed can be greatly improved, contrast and brightness are greatly improved, at the same time resolution has reached a very high level of. Thus can achieve high speed, high brightness, high contrast display screen, is the mainstream of the large-size flat-panel TVs, laptops and desktops on display device.

Whether the flat-panel televisions, notebook or desktop display, or 4K TV, the use of the TFT screen, is from the original glass, after cutting, edge grinding, coating, etching, stripping process, in order to become finished products, and on or before each procedure , must be approved by the clean, maintain its cleanliness in order to ensure that each process smoothly, ensure good product rate .

The trend of the times and the TFT screen size is bigger, in the face of great size and high generation panel, while the thickness of only 0.7-1.1MM glass cleaning machine , the precision is very high , the original panel factory are imported TFT glass cleaning machine to buy foreign very expensive . "Advanced technology enterprise and " began to spend huge sums of money in 2009 and foreign technical cooperation, gradually digestion and absorption, and finally in 2010 successfully developed the sixth generation (1500MM*1850MM ) TFT glass cleaning machine . With the development of technology, developed in 2011 eighth generation (2200MM*2500MM ) TFT glass cleaning machine . Became the only one with the production of the six generation and the six generation , the maximum TFT glass cleaning machine capable of producing eight generation size manufacturers . TFT glass cleaning machine made in China, save a lot of cost of the equipment for businesses to invest in high generation TFT-LCD panel .

Samsung Display will stop producing LCD panels by the end of the year. The display maker currently runs two LCD production lines in South Korea and two in China, according to Reuters. Samsung tells The Verge that the decision will accelerate the company’s move towards quantum dot displays, while ZDNetreports that its future quantum dot TVs will use OLED rather than LCD panels.

The decision comes as LCD panel prices are said to be falling worldwide. Last year, Nikkei reported that Chinese competitors are ramping up production of LCD screens, even as demand for TVs weakens globally. Samsung Display isn’t the only manufacturer to have closed down LCD production lines. LG Display announced it would be ending LCD production in South Korea by the end of the 2020 as well.

Last October Samsung Display announced a five-year 13.1 trillion won (around $10.7 billion) investment in quantum dot technology for its upcoming TVs, as it shifts production away from LCDs. However, Samsung’s existing quantum dot or QLED TVs still use LCD panels behind their quantum dot layer. Samsung is also working on developing self-emissive quantum-dot diodes, which would remove the need for a separate layer.

Samsung’s investment in OLED TVs has also been reported by The Elec. The company is no stranger to OLED technology for handhelds, but it exited the large OLED panel market half a decade ago, allowing rival LG Display to dominate ever since.

Although Samsung Display says that it will be able to continue supplying its existing LCD orders through the end of the year, there are questions about what Samsung Electronics, the largest TV manufacturer in the world, will use in its LCD TVs going forward. Samsung told The Vergethat it does not expect the shutdown to affect its LCD-based QLED TV lineup. So for the near-term, nothing changes.

One alternative is that Samsung buys its LCD panels from suppliers like TCL-owned CSOT and AUO, which already supply panels for Samsung TVs. Last year The Elec reported that Samsung could close all its South Korean LCD production lines, and make up the difference with panels bought from Chinese manufacturers like CSOT, which Samsung Display has invested in.

Samsung has also been showing off its MicroLED display technology at recent trade shows, which uses self-emissive LED diodes to produce its pixels. However, in 2019 Samsung predicted that the technology was two or three years away from being viable for use in a consumer product.

The injection of ITO glass — glass CLEANING and drying — PR COAT — PREBREAK — DEVELOP MAIN CURE — ETCHING — STRIP CLEAN — TOP COAT — UV CURE — curing — MANICURE) – cleaning (CLEAN) – applied orientation agent (PI) PRINT – CURING (MAIN CURE), cleaning (CLEAN), silk screen printing (SEAL/SHORT PRINTING) – baking (CUPPING FURNACE), SPRAY packing material (SPACER SPRAY) – para pressing (ASSEMBLY) – CURING (SEAL MAIN CURING)

A.The input of ITO glass: According to the requirements of the product, appropriate ITO glass is selected and put into the transfer basket. Specifications and models of ITO glass are required to meet the requirements of the product. Remember that the ITO layer must be inserted into the basket upward.

B. Cleaning and drying of glass: Clean ITO glass with the cleaning agent and deionized water (DI water), wash impurities and oil stains on the ITO surface with physical or chemical methods and then remove and dry the water to ensure the processing quality of the next process.

C.Photoresist coating: Evenly coat a layer of photoresist on the conductive surface of ITO glass. The glass coated with photoresist must be pretreated at a certain temperature: (as shown in the figure below)

D.Pre-drying: The glass coated with a photoresist is baked for a period of time at a certain temperature to volatilize the solvent in the photoresist and increase its adhesion to the glass surface.

E.Exposure: Ultraviolet light (UV) is used to illuminate the surface of the photoresist through the pre-made electrode pattern mask, which causes the reaction of the photoresist layer. The photoresist is selectively exposed under an ultraviolet lamp by covering the photoresist on the glass coated with the photoresist (as shown in the figure).

F.Development: the surface of the glass is treated with developer solution, the photoresist layer decomposed by light is removed, the photoresist layer of the unexposed part is retained, the photoresist of the part exposed by UV light is dissolved in the developer solution by chemical method, the developed glass has to undergo a certain temperature hardening film treatment.

H.Etching: With appropriate acid etching solution, the ITO film without photoresist covering is etched off. Thus, the required ITO electrode pattern is obtained.

Note:is conductive glass (In2O3 and SnO2), which is easy to react with acid and is used to etch off the excess ITO to obtain the corresponding wire electrode.

I.Film removal: the high concentration of alkali solution (NaOH solution) is used as the film removal solution to peel off the remaining photoresist on the glass, thus forming ITO graphics exactly consistent with the lithography mask on the ITO glass.

General TN and the STN product does not require this step, the TOP film coating process is after the photolithography process making SiO2 coating, once again to the etching area and the etching area between the grooved bridge and the electrode covering, this can have the effect of the insulation layer, and can effectively eliminate the display state of the bottom electrode, also help to improve the perspective characteristics and so on, so most of the high-grade product requires TOP coating.

This process involves coating an oriented layer on the etched ITO glass surface and treating the restricted layer in a specific way so that the liquid crystal molecules can be oriented (arranged) in a specific direction on the surface of the oriented layer. This step is unique to the production of liquid crystal displays.

Organic polymer-oriented material is coated on the surface of the glass, that is, a uniform orientation layer is applied to the appropriate position of ITO glass by a selective coating method, and the orientation layer is cured at the same time. (Usually in the display area)

Flannelette material is used to rub the surface of the oriented layer in a specific direction so that the liquid crystal molecules can be arranged along the friction direction of the oriented layer in the future. For example, TN type friction orientation: 45 degrees

In this process, two conductive glasses are stacked on top of each other, and sealed together, and cured to make a glass box with a specific thickness of clearance. The technology of box-making is one of the key technologies in LCD manufacturing. (Spacing of LIQUID crystal boxes must be strictly controlled)

Evenly distribute the supporting material over the lower glass. A certain size of the liner (usually a few microns) is evenly distributed over the surface of the glass. These materials are used to ensure that the spacing between the glasses is the thickness of the box.

press the upper and lower glass against each other on the counterpoint mark, and then glue the corresponding two pieces of glass face to face with sealing material.

Curing the sealing material at high temperatures. When curing, the pressure is applied to the upper and lower glass to make the spacing of the liquid crystal boxes (thickness remains uniform).

SCRIBING — BREAK OFF — LC INJECTION — END seal — BREAK OFF — sharpen — VISUAL inspection — ELECTRICAL test — secondary cleaning special procedure (POLYGON) — BACK PRINTING — dry ink — POLARIZER ASSEMBLY — Thermal pressure — Inspection appearance test (FQC) — BIT PIN — FINAL test — PACKING — IN STOCK.

STONE provides a full range of 3.5 inches to 15.1 inches of small and medium-size standard quasi TFT LCD module, LCD display, TFT display module, display industry, industrial LCD screen, under the sunlight visually highlight TFT LCD display, industrial custom TFT screen, TFT LCD screen-wide temperature, industrial TFT LCD screen, touch screen industry. The TFT LCD module is very suitable for industrialcontrol equipment, medical instruments, POS system, electronic consumer products, vehicles, and other products.