ntsc pal television tft display 1.5 price

Yes, this is an adorable miniature television! The visible display measures only 1.5" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voila, a television display! There"s a little button to adjust the LED backlight brightness (5 levels) - there is no other adjustment available but we found that the color and contrast look great right out of the box.

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any analog composite-video output such as a YBox or Propeller w/Video out. It will not work with a device that only outputs VGA, HDMI or any other digital video signal.

Please note, these miniature displays are very delicate and require care to avoid ripping the delicate flex connector. These are best used by electronics geeks who have experience and are comfortable working with delicate electronic components. WE CANNOT REPLACE DAMAGED DISPLAYS if you are not careful and rip the flex connector!

Yes, this is an adorable miniature television! The visible display measures only 1.5" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voila, a television display! There"s a little button to adjust the LED backlight brightness (5 levels) - there is no other adjustment available but we found that the color and contrast look great right out of the box.

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any analog composite-video output such as a YBox or Propeller w/Video out. It will not work with a device that only outputs VGA, HDMI or any other digital video signal.

Please note, these miniature displays are very delicate and require care to avoid ripping the delicate flex connector. These are best used by electronics geeks who have experience and are comfortable working with delicate electronic components. WE CANNOT REPLACE DAMAGED DISPLAYS if you are not careful and rip the flex connector!

Yes, this is an adorable miniature television! The visible display measures only 1.5" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voila, a television display! There"s a little button to adjust the LED backlight brightness (5 levels) - there is no other adjustment available but we found that the color and contrast look great right out of the box.

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any analog composite-video output such as a YBox or Propeller w/Video out. It will not work with a device that only outputs VGA, HDMI or any other digital video signal.

Please note, these miniature displays are very delicate and require care to avoid ripping the delicate flex connector. These are best used by electronics geeks who have experience and are comfortable working with delicate electronic components. WE CANNOT REPLACE DAMAGED DISPLAYS if you are not careful and rip the flex connector!

Yes, this is an adorable small television! The visible display measures only 7" (17.8cm) diagonal, the TFT comes with a NTSC/PAL driver board, enclosure and stand. The display is very easy to use - simply connect the included 12VDC adapter to the 2.1mm center-positive DC jack, then connect a composite video source to one of the RCA cable. Voila, a television display! There"s some little buttons on the front that let you enter a menu system for adjusting brightness, color and contrast. The display has two composite plugs, AV1 and AV2. AV1 is the default and if AV2 goes "live" it replaces AV1.

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any analog composite-video output such as a YBox or Propeller w/Video out. It will not work with a device that only outputs VGA, HDMI or any other digital video signal.

Yes, this is an adorable miniature television! The visible display measures only 1.5" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voila, a television display! There"s a little button to adjust the LED backlight brightness (5 levels) - there is no other adjustment available but we found that the color and contrast look great right out of the box.

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any analog composite-video output such as a YBox or Propeller w/Video out. It will not work with a device that only outputs VGA, HDMI or any other digital video signal.

Please note, these miniature displays are very delicate and require care to avoid ripping the delicate flex connector. These are best used by electronics geeks who have experience and are comfortable working with delicate electronic components. WE CANNOT REPLACE DAMAGED DISPLAYS if you are not careful and rip the flex connector!

A wide variety of lcd ntsc pal 1.5 options are available to you, such as original manufacturer, odm.You can also choose from tft, ips lcd ntsc pal 1.5,

All CategoriesPRODUCTSRobot ArmRobot GrippersProxxon MF70 CNC Kit4X4 Robot PlatformROBOTSRobot Arms & GrippersRobotic ArmWheeled RobotsSingle Wheel (Ball) Robot2 Wheeled Robot4 Wheeled RobotsTracked RobotsLegged RobotsHumanoidHexapodMulti Legged RobotsFlying RobotsQuadcoptersHexacopterWing Flapping RobotsRobot KitsLine Follower Robot KitsSumo Robot KitsArduino Training KitRaspberry Pi Training KitsRobot PlatformMAKE BLOCKRobot ToysRobot EducationTamiya MotorsRobot Training KitsROBOT PARTSElectric MotorDC MotorsServo MotorsStepper MotorBrushless MotorAC Synchronous MotorVibration MotorLinear Actuator MotorMicrocontrollerArduino BoardsArduino ShieldsADAFRUIT BoardsRaspberry Pi BoardsBeagleIntel Edison / GalileoOrange PiARM Development BoardsLattePandaElectronic BoardsMotor DriverVoltage RegulatorRelayConvertor BoardsOther Electronic BoardsRobot SensorsCurrent - Voltage - ForceGas - Sound - Light - HeatMotion - Gyroscope - AccelerometerVision - Contact - RangeRobot Sensor KitsOther SensorsPower & BatteryBattery Charge BoardsBattery Holder CaseAdapterSolar PanelsLi-Po BatteryWireless CommunicationWifi ModuleRF ModuleBluetooth ModuleGPS ModuleOther CommunicationRC Remote ControlMechanical PartsCNC Parts3D Printer PartsPlastic BoxWheels - ShaftsCamera Pan TiltGears - GearboxesMotor HoldersBody ChassisHub - Motor - Wheel CouplerRobot PrototypingSolderingSoldering IronSolder SuckerSoldering StandSolder CleanerSolder WireCablesFlat CableConverter & JackCrocodile CableUSB CableJumper CablesBreadboardsPrototype PCB Board3D PrinterPLA+ABS+PETGPLA GlassTools EquipmentsDigital MultimeterDrills & Drill BitsOscilloscopeProbes and Test LeadsElectronic ComponentsButtonDiodeThyristorTransistorLedLCD DisplayResistorPotentiometerInductorCapacitorCeramic CapacitorElectrolytic CapacitorPolyester CapacitorCrystalProcessorIntegrated CircuitSemiconductorSpeakerSocketConnectorRelaysCoolerConductive MaterialsClearance Sale

All CategoriesPRODUCTSRobot ArmRobot GrippersProxxon MF70 CNC Kit4X4 Robot PlatformROBOTSRobot Arms & GrippersRobotic ArmWheeled RobotsSingle Wheel (Ball) Robot2 Wheeled Robot4 Wheeled RobotsTracked RobotsLegged RobotsHumanoidHexapodMulti Legged RobotsFlying RobotsQuadcoptersHexacopterWing Flapping RobotsRobot KitsLine Follower Robot KitsSumo Robot KitsArduino Training KitRaspberry Pi Training KitsRobot PlatformMAKE BLOCKRobot ToysRobot EducationTamiya MotorsRobot Training KitsROBOT PARTSElectric MotorDC MotorsServo MotorsStepper MotorBrushless MotorAC Synchronous MotorVibration MotorLinear Actuator MotorMicrocontrollerArduino BoardsArduino ShieldsADAFRUIT BoardsRaspberry Pi BoardsBeagleIntel Edison / GalileoOrange PiARM Development BoardsLattePandaElectronic BoardsMotor DriverVoltage RegulatorRelayConvertor BoardsOther Electronic BoardsRobot SensorsCurrent - Voltage - ForceGas - Sound - Light - HeatMotion - Gyroscope - AccelerometerVision - Contact - RangeRobot Sensor KitsOther SensorsPower & BatteryBattery Charge BoardsBattery Holder CaseAdapterSolar PanelsLi-Po BatteryWireless CommunicationWifi ModuleRF ModuleBluetooth ModuleGPS ModuleOther CommunicationRC Remote ControlMechanical PartsCNC Parts3D Printer PartsPlastic BoxWheels - ShaftsCamera Pan TiltGears - GearboxesMotor HoldersBody ChassisHub - Motor - Wheel CouplerRobot PrototypingSolderingSoldering IronSolder SuckerSoldering StandSolder CleanerSolder WireCablesFlat CableConverter & JackCrocodile CableUSB CableJumper CablesBreadboardsPrototype PCB Board3D PrinterPLA+ABS+PETGPLA GlassTools EquipmentsDigital MultimeterDrills & Drill BitsOscilloscopeProbes and Test LeadsElectronic ComponentsButtonDiodeThyristorTransistorLedLCD DisplayResistorPotentiometerInductorCapacitorCeramic CapacitorElectrolytic CapacitorPolyester CapacitorCrystalProcessorIntegrated CircuitSemiconductorSpeakerSocketConnectorRelaysCoolerConductive MaterialsClearance Sale

Yes, this is an adorable small television! The visible display measures only 3.5" (8.9cm) diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red (+) and black (-) wires, ...

Yes, this is an adorable small television! The visible display measures only 2.5" (6.35cm) diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-15VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voila, a television display! There"s two little buttons to adjust the LED backlight brightness up and down (32 levels) and a button that "flips" the display horizontally - there is no other adjustment available but we found that the color and contrast look great right out of the box.

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any analog composite-video output such as a YBox or Propeller w/Video out. It will not work with a device that only outputs VGA, HDMI or any other digital video signal.

Please note, these miniature displays are very delicate and require care to avoid ripping the delicate flex connector. These are best used by electronics geeks who have experience and are comfortable working with delicate electronic components. WE CANNOT REPLACE DAMAGED DISPLAYS if you are not careful and rip the flex connector!

If you received a display where the connector cable has red & black wires going to the composite plug then connect yellow to ground, and white wire to 6-12V, thanks!

I"m starting a project to hook one of these cameras up for handheld use, and I wanted to essentially plug it straight into a display that would show what the camera sees in real time. I was looking for a screen around 1-2" in size, but had a few questions.

Yes, this is an adorable miniature television! The visible display measures only 1.5" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply ...