ford focus lcd display problems supplier

Our Ford Focus instrument cluster repair service will give you better value for money, takes 2-3 working days and comes with an unlimited mile Lifetime Warranty. Not only this but we also engineer-out the faults to ensure that the Ford instrument cluster problems do not return.

We fully test every instrument cluster before and after the rebuild process to ensure every instrument cluster performs as originally intended by the manufacturer and is as good as, if not better than a brand new unit. We test these units on a purpose build HIL (Hardware In-the-Loop) test rig that replicates all driving conditions, this allows us to replicate any fault described by the customer and eradicate Ford instrument cluster problems.

We take a great deal of pride in our work and will always handle your instrument cluster as if it where our own, we understand how important it is for your instrument cluster to always look as good as new when it is fitted back to your vehicle. We rebuild these Ford Focus clusters for both main dealers and independent specialist all over the globe, so you can always be assured of our very high standard of work.

If you have any questions regarding the Ford Focus Instrument Cluster Speedo Repair MK2 2004-2011, or would know how to remove your instrument cluster then please contact us.

Received in about 3-4 days. Removed instrument cluster from a 2015 Ford Escape SE. Disassembled instrument cluster with 4 Torx screws and came apart easily. Part was a little different than original. My original had no mounting ears and snapped into the cluster, but it fit just fine and the mounting ears didn"t get in the way of anything. The ribbon cable on the snap in type screen is a little tricky but is doable. Attached pictures show the blank screen (screen was also intermittent). The good picture is after new screen was installed.

Your mileage display is very important because it lets you know how much fuel the car is using. If your Ford Focus Mileage display not working, then here is what you need to do.

Ford vehicles come with various features that can improve the driving experience. One such feature is the mileage display. This display shows how much fuel the car has left and can help estimate how long the vehicle will last.

However, some Ford Focus owners report that the mileage display on their dash is not working. This may confuse drivers, as they may be unable to estimate how much fuel they have left.

Don’t worry. There are a few simple things you can do to fix the issue. This article will show you how to troubleshoot and fix common issues with the Ford Focus mileage display. You’ll be able to get your car back on the road in no time!

When your Ford Focus mileage display isn’t working, it could result from faulty wiring. The issue may be with the connection between the instrument cluster and the body control module (BCM) or between the BCM and the powertrain control module (PCM).

The computer is responsible for tracking the number of miles the car has traveled and displayed it on the dashboard. If it is not working properly, you will not be able to see how many miles you have driven.

If your Ford Focus mileage display is not working, it could be due to a faulty LCD display. The most common problem is that the display will not light up.

Another common problem is that the odometer display will not show any information. In some cases, the display may show incorrect information. In this case you might have to go back to your dealer.

The most common solution is to take your car to a mechanic or service center. They will be able to identify the problem and fix it for you. Another solution is to download and install a new software update from Ford. This update should fix the mileage display issue. If neither of these solutions works, your best bet is to take your car to the dealership and have them look at it.

If you want to do things yourself then you will need a screwdriver and a socket drive to fix the Ford Focus LCD mileage display. And a spare LCD if needed.

There is no definitive answer to this question because it can depend on various factors, such as the model of Ford Focus and the replacement part itself. However, as a general rule of thumb, it costs anywhere from $100 to $200 to replace a Ford Focus mileage display.

It is important to remember that labor costs may also be incurred, so be sure to factor those into your overall cost estimate. If you’re unsure what exactly needs to be done to replace the mileage display in your Ford Focus, it’s best to consult a certified mechanic or car dealership.

Your Ford Focus has a built-in display that shows important information like the current speed, how much fuel is left in the tank, and which gear you’re in. If this display starts acting up, or you just want to reset it to its factory default settings, here’s how to do it:

Due to a few potential causes your Ford Focus Radio screen may not be working. If the display has gone bad it will need to be replaced. If there is an issue with the car’s electrical system, which may require the help of a professional mechanic to diagnose and fix.

Finally, if there is a problem with the radio it will need to be repaired or replaced. If you’re experiencing problems with your Ford Focus Radio screen, troubleshoot the issue as best as possible and then talk to a qualified mechanic for further diagnosis and repair.

The Ford Focus is a car made for people looking for a reliable and affordable option. It is a compact car, making it easy to handle and park. The Focus also gets good gas mileage, which is another plus for people looking to save money.

In most cases, the main reason behind why your milage display not working is that there is a faulty wiring somewhere. You can easily correct it by replacing the wiring. Thank you for reading the article, we hope we have covered all the details that you needed.

Okay so I managed to solve the problem myself. The cluster"s LCD screen wasn"t working. I managed to purchase a used cluster from Israel off of ebay.com for $75 dollars. Ford Trinidad said because the ebay cluster was used, they could not configure it to work with my car. Anyway long story short, I dismantled the both clusters, and switched out the lcd screens. It worked! If anyone has ever opened and repaired a smart phone, then they can do this. the lcd setup is very similar to a smart phone. In fact, its easier to do. Now my cluster is like new.

This item is a color TFT LCD screen for a 2012 – 2018 Ford Focus. This screen will repair your black or blank speedometer display. Installation is simple. Simply remove the cluster, then remove the front lens and rear panel. The TFT LCD screen will easily pop out without disturbing the gauge needles. The small ribbon cable attached to the screen is also attached to the back of the circuit board. Carefully release the clip on the circuit board and remove the screen with the ribbon attached.

When you receive the new screen, you will reuse the original ribbon. Simply transfer it over to your new TAE screen. No programming is required. After installing your new LCD screen, plug your cluster back into your vehicle and enjoy a working display.

PLEASE NOTE: 2013 Ford Escape uses two different versions of this LCD screen.  With mounting bracket and without, please use the videos below to determine the correct LCD screen.