sansui hdlcd19wb tft lcd in stock

OWNER’S MANUAL 19" WIDE TFT LCD TELEVISION WITH DIGITAL TUNER HDLCD1900 If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. When shipped from the factory, the Tuning Band menu option is set to the “Cable” (Cable Television) mode.

To connect the LCD TV to a DVD player/Satellite receiver If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown. Rear of the LCD TV To AUDIO(L/R) IN Audio cord (not supplied) To connect the LCD TV to a DVD player with component video If your DVD player has component video out jacks, connect your LCD TV to a DVD player using a component video cord.

Connections to other equipment To connect the LCD TV to a DTV receiver/set-top box If you connect a DTV receiver/set-top box, connect your LCD TV to a DTV receiver/set-top box using a compo- nent video cord. Rear of the LCD TV To COMPONENT IN Video cord (not supplied) To AUDIO(L/R) IN...

To connect the LCD TV to a Game The LCD TV can also be used as a TV device for many video games. However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams.

Connections to other equipment To connect the LCD TV to a PC (Personal Computer) Before you connect this LCD TV to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz). Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR on the back of the LCD TV.

The ideal viewing distance for your Sansui television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

HOW TO HANDLE THE LCD PANEL • Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur. • If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation. If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.

Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your LCD Panel on for long periods of time while it is displaying the following formats or images: • Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites. • Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (black bars on left and right sides of screen).

The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any responsibility for these symptoms. • LCD Panels are manufactured using an extremely high level of precision technology, however sometimes parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction. • Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some equipment placed too near this unit may cause interference. • Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless headphones.

Notes when mounting the LCD TV on a wall • If the unit is to be mounted on the wall, contact the retailer where you purchased the LCD TV for advice, and have the equipment professionally installed. Incomplete or improper installation may cause injury to you, and/or damage to the LCD TV. • Bracket holes: To attach a wall mounting bracket (not supplied) attach Bracket holes where indicated in the drawing right. • This manufacturer recommends professional installation. • Utilize an appropriate bracket and fasteners, sufficient to accommodate the size and weight of the unit. • Assure the wall to which the unit is to be mounted will safely support the size and weight of the unit, using the bracket and fasteners you have selected. • Keep cords and cables connected to this flat panel display out of reach of children. • To hang the television on a wall, remove these screws and then remove a stand. Before performing work spread cushioning over the base area to lay the TV on. Screws 5

3CL0421A_En.indd 6 5/31/10 4:08:54 PM Features • Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. • Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS. • Programmable TV Sleep Timer - Operable from the remote control, the LCD TV can be programmed for up to 120 minutes to turn off automatically. • V-Chip - The V-Chip function can read the rating of a broadcast program or movie content if the program is encoded with this information. V-chip will allow you to set a restriction level. • Digital Audio Jack (Coaxial) - When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the effect of being in a movie theater or a concert hall. • Component Video Jacks - A VCR, DVD player, satellite receiver or other audio/video component can be connected to this unit. • On-Screen 3 Language Display - You can select one of 3 languages, English, French or Spanish for on- screen programming.

NOTE: • Please make sure to insert the cord securely at both the LCD TV and the wall outlet. • The AC cord has a polarized type AC line plug. If the supplied AC cord does not match your AC outlet, contact a qualified electrician. WARNING: • DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED AC CORD. THIS COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE. • DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE SPECIFIED. THIS COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.

3CL0421A_En.indd 9 5/31/10 4:08:59 PM Remote control 6.MENU Button - Use to display the On-Screen menu function. 1 7.SLEEP Button - To set the LCD TV to turn off after a preset amount of time, use the SLEEP button on the remote control. 2 8.CCD Button - Used to display the Closed Caption menu screen. 3 10 9.AUDIO Button - Change soundtrack language. 10.RECALL Button - This button allows you to go 11 back to the previous channel selected by just pressing the RECALL button. Press this button 4 again to return to the channel you were watching. 12 11.VOL (VOLUME) + / – / CURSOR / Buttons - Used to operate the menu functions of the LCD 5 13 TV. Press the button to increase, or the button 6 14 to decrease the sound level. 7 15 12.ENTER Button - Use to enter or select information for On-Screen operations. 8 16 13.DISPLAY Button - When you press this button, 9 the current information will be displayed on a screen. To remove the display from the screen, 1.POWER Button - Used to turn the power on/off to press this button again. the LCD TV. 14.MUTE Button - To turn off the sound, press this 2.Direct Channel Selection Buttons (0-9) - Allows button once. The LCD TV will be silenced and direct access to any channel of the LCD TV. the symbol “Mute” will appear on the screen. The 3.– Button -This button is the “–” button used when muting feature can be released by pressing the selecting digital channels. MUTE button again or one of the VOL (VOLUME) + or – buttons. 4.CH (CHANNEL) + / – / CURSOR / Buttons - Used to operate the menu functions of the LCD TV, 15.INPUT SELECT Button - Use to change the and to change the channels of the LCD TV. external input. 5.EXIT Button - Press to remove setup menu. 16.SCREEN SIZE Button - Used to change the picture size.

To connect the LCD TV to a VCR Rear of the unit VCR To VIDEO/AUDIO IN To Video/Audio OUT Video/Audio cord (not supplied)

4 “Auto Setup” will begin. After the starting setup VHF/UHF/CABLE CHANNELS Air Cable is completed, the TV channel appears on the screen. VHF VHF • Depending on the reception condition, it may 2-13 2-13 take up to 30 minutes to complete memorizing UHF STD/HRC/IRC digital cable channels. Please allow the 14-69 14-36 (A) (W) process to complete without interruption. 37-59 (AA) (WW) 60-85 (AAA) (ZZZ) NOTE: 86-94 (86) (94) • If you press ENTER in the process of “Auto Setup”, 95-99 (A-5) (A-1) the Starting Setup stops and changes to the normal 100-135 (100) (135) screen. 01 (4A) • When you make a menu selection, your changes occur immediately. You do not have to press EXIT to NOTE: see your changes. • If a channel with no broadcast is selected, the • When you are finished programming the menus, sound will automatically be muted. press EXIT. • It may take a few seconds for a digital channel picture to appear on screen after being selected. TV operation To select the video input source To view a signal from another device connected to 1 To turn on the TV, press POWER. (It may take approx. 10 seconds for a picture to your LCD TV, such as a VCR player, press INPUT SELECT, then press / or corresponding Number appear on screen.) buttons (0-3), then press ENTER. You can select TV,

3CL0421A_En.indd 23 5/31/10 4:09:13 PM Troubleshooting Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units.

3CL0421A_En.indd 24 5/31/10 4:09:14 PM Specifications GENERAL Power supply: AC 120V 60Hz Power consumption: Operation: 29W Stand by: 0.3W Weight: 3.2 kg (7.1 lbs) Dimensions: Width: 472 mm (18-9/16 inches) Height: 362 mm (14-1/4 inches) Depth: 174 mm (6-7/8 inches) Operating temperature: 5˚C - 40˚C Operating humidity: Less than 80% Type: 47.01 cm (19” class/18.5” diagonal) Display method: Transmission TFT color LCD panel Number of Pixels: 1366 (H) x 768 (V) Broadcasting system: US system M ATSC standard (8VSB), QAM Receiving channels: VHF 2-13 UHF 14-69 CATV 14-36 (A)-(W) 37-59 (AA)-(WW) 60-85 (AAA)-(ZZZ) 86-94 (86)-(94) 95-99 (A-5)-(A-1) 100-135 (100)-(135) 01 (4A) Tuner type: Frequency synthesized Inputs: Video: (RCA) 1 V p-p/75 ohms Audio: (RCA) –8 dBm/50k ohms Component video: (Y) 1 V (p-p), 75 ohms (Pb)/(Pr) 0.7 V (p-p), 75 ohms PC Monitor: Mini-Dsub 15pin x 1 Antenna: VHF/UHF In 75 ohms coaxial Outputs: Digital audio out: 0.5 Vp-p 75 ohms terminated Speaker: 25.4 mm x 68.6 mm (1 inch x 2-11/16 inches), 8 ohms x 2 Audio output power: 1.5W + 1.5W ACCESSORIES Remote control Batteries (AAA) x 2 AC Cord Stand Screws x 2

3CL0421A_En.indd 25 5/31/10 4:09:14 PM limited WARRANTY 19” WIDE LCD TELEVISION ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1 year from date of original purchase in the United States.