gopro lcd screen not working made in china

It may be either a loose connection to the LCD screen, that the LCD screen is faulty and needs to be replaced or worst case that there is a fault on the motherboard.

Try shining a torch at an angle close to the LCD screen to check if you can detect an image at all when using the camera. It will be very faint so try it in a darkened room if possible.

If you can detect an image it means that there is a backlight problem with the screen. Either there is no power being supplied from the motherboard to the backlight circuit in the LCD screen or the backlight circuit in the screen is faulty and the screen will have to be replaced as it cannot be repaired. Hopefully it is not a motherboard problem in supplying backlight power to the screen.

If you cannot detect an image (or even if you can) then unfortunately without a schematic, the only way to determine if it is a problem with the screen or the motherboard is to replace one or the other. Again hopefully it is not a motherboard problem.

Here’s a link to a video that shows how to replace the LCD screen + digitizer in the camera. This will also help you to check if the LCD video flex cable connection is OK.

Here’s a link to the GoPro Hero5 Black Repair guides which may also help if the video isn’t clear enough at some points. Unfortunately there is no ifixit guide showing the LCD screen removal.

Send it in, they sent me a new one. The only steps are a manual reset. Or to just use the go pro app as a screen, but it will not work anymore after the manual reset because you need the screen for initial setup. So kids going forward if your screen is blacked out but it’s already set up with the app and you’re out of warranty just use the GoPro app as a screen, it sucks but do that or maybe get the attachment screen MOD luckily I still had 6mo left on warranty and I can’t justify spending $20 a month for the go pro plus joint I mean you’re basically buying a GoPro every year so... get that roll cage and the heavy duty accessories, that Amazon crap is totally unreliable it will break! I promise you, it’s going to break especially the handle bar mounts!

I think I might be having the same issue here. The main screen is getting power as it shows light, and the touchscreen is working according to the front display, yet there is nothing showing on the main screen. The issue started after I had fixed a different issue with the battery and replaced the SD card. I had read that inserting the SD card incorrectly could damage the ribbon cable for the LCD screen, but that can"t be the case for me because I made sure that the SD was in properly. I have attempted to manually update the camera multiple times, but it is impossible to reset it because I can"t see the screen to navigate to the reset option. Have you figured out a fix for it yet?

I have the exact same problem. Bought my GoPro 2 weeks ago, used it for 2 weeks... downloaded / updated the firmware this morning using the iPhone app... restarted and now the back / LCD screen doesn"t turn on at all. I chatted with support for 2 hours and they had me manually install the update which I downloaded here:

and then installed by coping the resulting "UPDATE" folder to my SD card, which after a couple tries did take but didn"t fix the problem. I"m left with a 2 week old GoPro that has a non-functioning LCD screen.

I"d put money on the firmware update being the issue as 1) that"s the only thing that"s changed for me since this morning and b) the problem is that the touchscreen isn"t displaying anything at all.

All GoPro"s are made in China, they are however designed and engineered in the states before the designs are sent to China for manufacture. GoPro have their own facilities in China that do this.

There have been ZERO cases of imitation of fake GoPro camera"s being sold on the market. Their are knock off brands that are much cheaper or in some cases people have tried to buy a GoPro online from ebay or craigslist only to find that someone has swapped the camera in the box for another one (which looks completely different and doesn"t have any GoPro branding on it).

Trying to reload the firmware manually may help. However it"s also possible that there is an internal failure causing the main screen not to work. I would try the following:

1: Remove the battery. Put the battery back in. Power on the camera using the side Power/mode button. Then hold down the side Power/mode button for 10 seconds to initiate a software reset. See if this works. If not, proceed to step 2

2: Perform a manual update of the GoPro Firmware. Here"s a video showing how to do this for the GoPro Hero 8. The same applies for the GoPro Hero 9, you will just be download the Hero 9 firmware instead of the Hero 8 Firmware:

I"m having a major issue wtih my GoPro Hero 7 Black. I turned it on yeasterday and out of the blue the touch screen was not working, completly unresponsive to any tap. The power button and the capture button are working fine.

GoPro"s latest fleet of little action bricks are fortified with several advanced features that cannot be found elsewhere in the market. The GoPro Hero 3+ Black Edition ($399.99) is the newest flagship model, replacing the GoPro Hero 3 by adding some key upgrades. While the GoPro Hero 3+ Silver Edition ($299.99) and Hero 3 White Edition ($199.99) have both been upgraded, it"s the Hero 3+ Black Edition that really showcases all the brand has to offer. Having owned the first HD Hero and Hero2, I wanted to know if the Black Edition was worth the extra cash, so I spent some quality time testing the camera in a variety of environments.

The GoPro Hero 3+ Black Edition shares many similarities with its predecessor, the Hero 3. Although the Hero 3+ may seem like an incremental upgrade, there are a number of subtle changes that make this action cam stand out. First off, it"s 20% smaller and lighter than the first GoPro Hero and Hero2, measuring 2.30 x 1.55 x 0.08 inches (5.8 x 3.9 x 2 cm) and weighing 2.6 oz. (28g). Now while those physical stats remain identical to the Hero 3, the Hero 3+ ships with a smaller housing, with a streamlined lens covering without bolts, and devoid of the slide lock mechanisms. The resulting package is more compact and easier to access. The Hero 3+ also has slightly larger buttons.

GoPro also improved the lens of the Hero 3+, making it sharper and exhibit less artifacts. The microphone is improved to pick up on more subtle sounds and improve wind noise reduction. The Hero 3+ Black Edition"s built-in Wi-Fi has also been boosted to 4x faster speeds with a greater range, and the battery life has been increased by 30%. The Hero 3+ Black Edition also introduces SuperView FOV, which is available in select capture resolutions. SuperView is the widest recording angle GoPro has offered to date (I have samples later on in the article). Auto Low Light is a new feature that cuts the frame rate in half when the camera detects lower light levels.

The GoPro Hero 3+ Black Edition carries over the same 4K video resolution from the Hero 3 Black, which is roughly four times the resolution of 1080 Full HD. 4K is where most televisions and programming are headed to, and GoPro placed themselves at the head of the game by incorporating the format into a wildly popular camera that is now smaller than it ever was. The Hero 3+ Black Edition also has a maximum still image resolution of 12MP and 30fps burst rate, which is beyond the 3+ Silver and 3 White"s capabilities. The latter two are not capable of 4K video recording either. Keep in mind that the 12MP still-resolution is native, not interpolated, so it"s a true representation of pixels.

And while all three new GoPros come with built-in Wi-Fi that"s 4x faster, the Black Edition is the only model to ship with a Wi-Fi remote. However, I don"t think that"s a deal-breaker because the GoPro app is far more user-friendly and quick than the remote. Just the fact that Wi-Fi is finally built-in is a win. With the older models, I had to use the Wi-Fi back, which prevented me from using a battery back or LCD back if I wanted remote functionality.

Since the GoPro Hero 3+ Black Edition is 20% smaller and lighter than the original GoPro Hero and Hero2, I was able to enjoy the minor benefits. I usually mount the GoPro to my motorcycle and hockey helmets, and the first two models make it easier to remember that they are strapped to the top of your head, thanks to their bulk. This is particularly evident while turning my head. While the Hero 3+ is not a prodigious reduction in bulk and size, it was definitely noticeable, and certainly more neck-friendly. The size reduction renders the Hero 3+ half the thickness of the first two models, but it retains the same height and width. The newly slimmed-down external housing on the Hero 3+ is the most compact and easiest to access housing yet. The latch mechanism is similar to the first GoPro models, requiring a simple flip lock to be engaged and disengaged to access the camera. The Hero 3 case has a convoluted series of slide lock buttons that made accessing the camera a royal pain. So, overall size and weight is very impressive compared to all previous models.

Now, this size reduction does come at a price. The Hero 3+ records to MicroSD cards, just like the Hero 3. I am not a huge fan of MicroSD cards because I lose things easily, and it"s not fun to scour a dirt bike trail for an hour looking for a minute plastic chip. I also noticed the omission of the 3.5mm audio jack, which is something offered on the GoPro HD Hero2.

The GoPro Hero 3+ has only two terminals: USB and HDMI. Both terminals and the MicroSD card slot are covered by a rubberized flap that matches the cross-hatched texture bordering the camera. Unfortunately, the terminal cover is not tethered to the body of the camera, so it popped off and sailed across the room the first time I removed it. It resurfaced two weeks later while digging through some photography equipment. So, for the next model, GoPro needs to tether that thing.

Despite the slim down, GoPro managed to cram an 1180mAh battery inside the Hero 3+, and promised a longer battery life compared to the Hero 3. I put this to the test by recording continuously at 1080p/24fps until the battery died. The GoPro Hero 3+ lasted a full 2 hours and 14 minutes. After researching many accounts of battery life on the Hero 3, my understanding is that it usually croaks at around 1 hour 35 minutes, so the Hero 3+ is a bit of an improvement as far as battery life goes. Of course, when using the Wi-Fi functionality, the Hero 3+ exhibits rather limited battery life. After using the Hero 3+ tethered to the GoPro application on my iPhone, I was down a battery bar after a half hour.

Another area of improvement is Wi-Fi range and speed. GoPro claims a Wi-Fi range of up to 600 feet with the included Wi-Fi remote and a more limited range with the GoPro application. I got about 145 feet of Wi-Fi range using the GoPro application, but did not test the full range of the remote. However, in my experience, I never lost connection with the Wi-Fi remote, and I have not found an application yet where I would need to be two football fields away from the action. Regardless, the Wi-Fi connection was strong and did not falter. I could keep my phone in my pocket while using the GoPro and it remained connected. Setting up is a snap as well, as the Hero 3+ only emits its own Wi-Fi network that is easily joined by a smart device in a matter of seconds.

The choice between the GoPro application and the Wi-Fi remote was a no-brainer for me. While the remote has its advantages in the range and battery life department (you can save your phone"s juice), the GoPro application is just too pleasant to use, especially after enduring years of clunky GoPro menu systems on a monochromatic LCD screen smaller than a postage stamp.

With the GoPro application, I could make nearly every camera setting with a tap. The GoPro application also gave me a live preview of the camera, so I knew exactly how to set the angle for maximum coverage. One caveat is that the live preview is only available in select capture modes, so gigantic resolutions like 4K are not possible to preview. I could also watch what I shot on my phone, power the camera on and off, and start and stop recording, all from my iPhone. Other useful features like battery level status, SD card capacity, camera locator (prompts GoPro to beep if lost), were welcome additions, and I decided the GoPro application would be accompanying me on all of my adventures. Of course, I"ll need a backup battery pack for the GoPro and charging stick for my phone in order to make it through a full day.

The improved microphone on the GoPro Hero 3+ is twofold. First, its overall pickup quality is said to be improved, with heightened sensitivity to delicate sounds and nuance. Secondly, the wind noise reduction is apparently improved. The latter is a big one, as there"s nothing more vexing than sifting through hours of motorcycle footage with the deafening shrill of wind prompting you to reach for another aspirin. I"ve always wanted more engine sound, less wind noise.

My first test was general audio quality. What could be better than pounding on the drums? I tested the GoPro Hero 3+ with it mounted to my head in the case, and then again sitting stationary removed from its case. What I found was that in or out of the case, the GoPro Hero 3+ had some difficulty with bass, primarily during a thunderous cacophony. However, treble sounds like cymbals and snare hits were crisp and clear, particularly with the Hero 3+ outside of its case. On the in/out of the case debate, I found the sound to be a bit crisper when the Hero 3+ was removed from the case, but it was not a huge difference. So yes - small nuance sound pickup was impressive, but bass was a tad muffled. Now if only the Hero 3+ had that 3.5mm audio jack for attaching external mics.

My second test was of the wind reduction. I found a rare 45 degree window in this unrelenting New England winter and took my newly rebuilt dirt bike for a spin with the GoPro mounted to the Chesty harness. Now this was a noticeable improvement. At around 45-50 MPH amidst cold, thick air, the only audible wind noise was more of an intermittent lower toned muffling. Gone was the whistling, shrill wail-from-hell. At lower speeds, the wind noise was barely audible, and the Hero 3+ really picked up on the ring-da-ding of the two-stroke engine (which is still being broken in and sounds extra rough). I didn"t have a chance to exceed 50 MPH, and I"m really interested to see how the Hero 3+ fares at over 100 MPH on my street bike. But based on the improvement at lower speeds alone, I can project improved wind-reduction ability.

Windows 10 is notorious for facing the issue of the black screen while videos are played. To resolve the black screen issue when playing videos on windows 10, you need to have a mechanized approach. It means that you need to apply different solutions to get the problem resolved like a pro.

The black screen issue is one of the most faced. Window 10 users generally are the victims of the issue. To resolve the issue completely, one should know the difference between a black screen and a video black screen.

Windows black screen is related to the core functionality of the windows. It has to do something with the directory files. When it comes to the video black screen, it is software related error and should be treated as such.

The windows black screen error can easily be resolved by using the built-in Windows functionality. It does not apply to video black screen as some issues are related to the video itself.

The windows black screen issue also differs in terms of hardware. It is most of the time related to the hardware. It is mostly related to the software as the video, in such cases, malfunctions when it comes to video black screen.

The windows black screen also has a different hierarchy as the update of windows is required for this issue. The video black screen error has a different approach to the system. It means that the issue should be treated as a software problem instead of a system.

The corrupted file is the main reason that the windows screen turns black. A variety of factors can cause the issue. This includes header issues, video file transfer errors, issues with the video"s codecs, and the list goes on. Some other reasons are:

The windows black screen issue also differs in terms of hardware. It is most of the time related to the hardware. It is mostly related to the software as the video, in such cases, malfunctions when it comes to video black screen.

Update Display Drivers: It is also another simple process that will get your issue resolved. Head over to Start > Device Manager > Right-click to update the driver.

Check the Installations: If the graphic and the display drivers are not installed properly, you will face the issue. Head over to Start > Device Manager > Right Click and go to the properties. Take a look at the version number and the installation date to ensure that the latest version is being run.

If the above mention solutions do not work, then there is a probability that the hardware has undergone some problem. Taking the system to the manufacturer is the solution in this regard. The above-mentioned are all the software-related solutions. Professionals can only apply hardware-related solutions, so seek their assistance.

As mentioned before the video corruption is one of the main reasons for the black windows screen. You can get rid of the video file corruption through this program.

Several processes can be applied to make sure that the video black screen issue is fixed completely. All the process which are mentioned below is purely computer-based.

The process will allow you to increase computer performance as an add-on. To make this happen, you need to right-click on the desktop and create a shortcut. Paste the command %windir%\system32\rundll32.exe advapi32.dll, ProcessIdleTasks, and save the shortcut onto the desktop. If the black screen is faced while playing videos, you need to click the file double to clear the cache, which will resolve your issue.

This is another process that will unload your system completely. You need to access the RUN window and type TEMP. Hit enter, and you will get access to the hidden folder. Delete the folder"s contents entirely, and you will most probably resolve the black screen issue while playing videos.

It is an important mode that uses the processor"s ultimate power to get rid of your system"s issues. With the ultimate power, the issue of the video black screen is resolved at times. Head over to home > settings and then turn on the gaming mode. It will allow you to maximize the processor speed, which will resolve the video black screen issue. The gaming mode has been added exclusively to windows 10, and it has been introduced to boost your PC"s capability to a great extent.

It is another important factor that can lead to the problem in question. It can be disabled with ease and perfection. To make this happen, you need to head over to the Start > type Regedit and then find the path as follows:

Disable the TCP with no delay and ACK frequency. It will make sure that the performance of the RAM is further boosted. This will eventually resolve your issue of a video black error screen.

The black screen video problem can be faced for several reasons. The computer-based solutions are though efficient but do not take care of corrupted videos. Wondershare Repairit is the only practical solution that can get out of the trouble if your videos are corrupted due to the black screen.

GoPro, Inc.GoPro and sometimes stylized as GoPRO) is an American technology company founded in 2002 by Nick Woodman. It manufactures action cameras and develops its own mobile apps and video-editing software. Founded as Woodman Labs, Inc, the company eventually focused on the connected sports genre, developing its line of action cameras and, later, video editing software. It is based in San Mateo, California.

The company was founded by Nick Woodman in 2002.surfing trip to Australia in which he was hoping to capture high quality action photos, but could not because amateur photographers could not get close enough or buy appropriate quality equipment at reasonable prices.

On May 19, 2014, GoPro filed its Form S-1 with the SEC without specifying the number of shares or their price. The company stated that they hoped to raise at least $100 million through the sale of shares, using the money to pay off debt in full ($111 million as of March 31, 2014) and "to acquire or invest in complementary businesses, technologies or assets". They said that they planned to list on the NASDAQ stock exchange using the symbol "GPRO."

The expected price range was $21 to $24 a share; on June 25, 2014, GoPro sold 17.8 million shares to initial investors at $24 per share (totaling $427.2M).

One reason for GoPro"s decision to go public was the potential to become a media company to generate additional revenue from the content its cameras create.

Woodman worked on his first camera for two years after founding the company, eventually introducing the GoPro 35mm HERO in September 2004 at San Diego"s Action Sports Retailer trade show.

On September 28, 2017, GoPro released the HERO6 Black, which claims improved stabilization over the HERO5 models and is capable of capturing 4K video in 60 FPS.

On September 20, 2018, GoPro came out with the HERO7 Black, which apart from providing improved stabilization over HERO6 models with HyperSmooth, also featured the new form of video capturing, "TimeWarp", providing a high speed effect to the videos. HERO7 also came out with capability to stream live across multiple platforms like Facebook and YouTube .

On October 15, 2019 GoPro released the Hero8 Black, which included improved in-camera stabilization by way of Hypersmooth 2.0. The Hero8 Black introduced integrated mounting "fingers" which could be folded down for use, and was also notable for not having an easily replaceable lens available from GoPro, though a third party replacement lens kit is available from a company called Camera Butter.

In 2014, GoPro entered into discussions with DJI for a private label model built with the GoPro branding. After the failure of these negotiations, GoPro entered into an agreement with 3D Robotics (3DR) for a similar partnership based on 3DR"s flight controllers. 3DR failed to meet their agreed-upon timelines. As a result, GoPro took full control of the development process in mid-2015.

Scheduled to be released early 2016, the GoPro Karma project was delayed several times before the GoPro Karma was announced with an introduction date of October 23, 2016. The Karma was released along with newer models of the HERO5 and Session cameras and features a removable handheld stabilizer (gimbal) integrated into the design. After a few customers complained about power failure during operation, GoPro recalled Karma drones and gave customers full refunds.

In November 2017, GoPro launched the Fusion camera,omnidirectional camera which is capable of recording 360-degree footage. The Fusion was the first GoPro to feature an increased maximum resolution of 5.8K.

GoPro produces various mounting accessories for its cameras including a 3-way mount, suction cup, chest harness, jaws-type flexible clamp, dog harness, surfing mount, etc.

In April 2014, GoPro was listed by Adweek as one of the "Top 10 Best Brand Channels on YouTube" based on a combination of views, shares, comments and overall engagement.

As part of its transformation to a media company in 2014, GoPro created additional channels with GoPro content on YouTube, Virgin America, and Xbox Live.PlayStation Network in 2015.

The GoPro Wide HERO was the first model with a 170° wide-angle lens. It was released in 2008 alongside the Digital HERO5 and had the same 5MP sensor (2592 x 1944), capable of 512x384 at 30fps video with sound recording (up to 56 min. on a 2GB SD card), 5MP Photos, 10s Self Timer, 3X sequence still photo burst and Auto "Photo every 2 or 5 seconds" mode. It was powered by 2 x AAA batteries (not included in the box).

The second generation of the HERO cameras (2010–11) were branded HD HERO for their upgraded resolution, now offering up to 1080p high-definition video. With the HD HERO generation, GoPro dropped the optical viewfinder.

The HD HERO also offered an expansion port on the camera"s rear panel, branded the HERO Bus. Optional accessories included the LCD Bakpac, which offered a small monitor that displayed and played back video, and the Battery Bakpac, which doubled the battery life of the camera.

All three versions of the HERO3 come in a 30% smaller and 25% lighter package, with WiFi built in. The change of the physical dimensions of the cameras compared to the previous generations (HD HERO and HD HERO2 were physically identical) means that some accessories for HD HERO Original and HERO2 are not compatible with HERO3, so GoPro made new versions of those accessories specifically for HERO3, which mostly also were compatible with HERO3+, see below. Those new versions of accessories are usually not compatible with older Hero camera generations. However, a lot of other accessories are compatible with all HD Hero camera generations.

The Black EditionWVGA at 240 fps.BSI sensor included in a GoPro. The Black edition also includes the WiFi Remote. The Black Edition cannot record at 25/30 fps in 720p and WVGA resolutions; it can only record at very fast frame rates in those resolutions. This is a deliberate firmware limitation, as the manufacturer does not expect that this high-end camera model will be used at these lower resolutions and frame rates.

A timelapse recording one frame every 10 seconds with a GoPro HERO3 camera mounted on a bicycle helmet during a bike ride in Chicago. Note how the wide angle lens allows for the rider to capture wide images.

The HERO3+ camera models claim dramatically improved low light performance and have a waterproof enclosure which is 20% lighter and 15% smaller than the HERO3"s, according to the GoPro website. The HERO3+ camera housing is 20% smaller than the HERO3. The cameras are claimed to have improved image sharpness (close focus down to 7" vs about 3 ft on the HERO3, at the expense of distant focus which is slightly less sharp

The HERO4 Black Edition still has a 12 megapixel (MP) CMOS and a f/2.8 fixed maximum aperture and focus free. It adds Bluetooth connectivity, Highlight tag, Protune Available for photo and a new processor claimed by GoPro to be twice as fast as that of the HERO3+ Black Edition, doubling the frame rates in most resolutions. The HERO4 Black Edition can record 4K UHD video (3840×2160) at a frame rate of 24, 25 and 30 fps.Wi-Fi disabled at 4K/30, GoPro claims the HERO4 Black Edition battery life to be 65 minutes, increasing to a maximum of 1h 50" at 720p/240.

The HERO4 Silver Edition is basically a HERO3 Black Edition with the addition of a micro speaker,touchscreen display, Protune for photo and highlight tag (the first GoPro with this), a lower clocked Cortex-A9 and missing the Black Edition"s integrated analog-to-digital converter which supports a wider variety of professional low-sensitivity external microphones.4K video (3840×2160), but it supports Wi-Fi, Bluetooth and contains the sameAmbarella Inc. A9system on a chip (SoC) as in the HERO4 Black.

The HERO4 models maintain the H.264 video codec of previous versions and MP4 file formats. GoPro claims the mono microphone in both the Black and Silver Editions has twice the dynamic range of that in the HERO3+, and that the HERO4 Black and Silver Editions have improved low-light performance.

In September 2014, GoPro released an entry level camera named simply "HERO", priced at $130, alongside the HERO4 Black and HERO4 Silver. It is built into a waterproof housing, unlike the HERO4 line.

The GoPro HERO (2014) can capture 5mp still images and has a 5fps burst option. It is able to record 1080P at 30 or 25fps and 720P at 60 or 50fps on to a MicroSD card up to 32GB. It has an LCD non touch display on the front and is waterproof down to 40m.

In June 2015, the company started to sell the GoPro HERO+LCD, which provides video recording at 1080p at 60 fps and 8 megapixel photos. The HERO+LCD is also built into a waterproof housing.

The HERO6 Black was introduced on September 28, 2017.HEVC video recording at up to 60 fps and 1080p at up to 240 fps, automatic upload of footage to cloud, voice controls and 5 GHz Wi-Fi. It was the first GoPro sporting GoPro"s custom system on a chip (SoC) the GP1.

The HERO7 White, HERO7 Silver and HERO7 Black were announced and released in September 2018, as the seventh-generation action camera series from GoPro.

By contrast, the HERO7 Black was introduced at the high-end level and primarily encompasses the features of the HERO6 Black with major improvements. The HERO7 Black introduced a heavily improved electronic image stabilisation known as "HyperSmooth" video stabilization, which GoPro has advertised heavily as "Gimbal-Like", as its primary improvement.

On February 28, 2019, GoPro released HERO7 Black in a new "dusk white" color. This is a limited edition and it has the same specs as in regular version and differs just in color.

The HERO8 Black essentially contained the former features of the HERO7 Black, however improved on certain functions. Most notably, the "HyperSmooth" feature introduced in the HERO7 Black was improved on and named "HyperSmooth 2.0", also resulting in an improvement of the TimeWarp feature introduced in the HERO7 Black. The HERO8 Black also improved the image quality, improving the HDR functions of the camera to allow HDR to assist the SuperPhoto function of the camera that automatically chooses what image processing to use such as high dynamic range (HDR). GoPro also reintroduced the field-of-view (FOV) functionality as, "Digital Lenses" which retains the original SuperView, Wide, Narrow, Linear FOV settings. Moreover, live-streaming now streams in 1080p instead of the HERO7 Black"s 720p and the RAW imaging functionality has now been expanded for all photo modes.

The HERO8 Black largely introduced several new functions into the camera. Physically, the HERO8 Black now incorporates the connecting prongs that are used to connect accessories, directly onto the camera. Originally, the cameras would only be able to access the prongs if the cameras utilised either the frames (for cameras HERO5 to HERO7) or the protective cases for HERO4 and before. Moreover, the GoPro logo moved under the LCD screen to make way for extra microphones. More additions to the camera most notably were part of the software aspects of the camera. These included an option to switch between various settings presets, including standard, activity, cinematic and action shots and adjusting on-screen shortcuts of the user interface. Most notably as part of software, was the introduction of the night-lapse video, which similar to the time-lapse video mode, automatically stitches the frames captured by the camera at set intervals, however with the addition of improved low-light performance.

The HERO8 Black also attempts to address vloggers who may wish to use the GoPro in such a manner. As such, GoPro has also introduced an external accessory known as the "Media Mod" which includes a USB Type-C port for supplying power to external microphones and accessories, a micro-HDMI port and a 3.5mm microphone port. Moreover, the accessory includes a mount to connect either external microphones, LEDs or an LCD screen.

The HERO9 Black essentially contained the former features of the HERO8 Black, however, improved on certain functions. Most notably, the "HyperSmooth" feature introduced in the HERO7 Black and refined in HERO8 Black was improved on and named "HyperSmooth 3.0". It also features a max resolution of 5K for video and 20M for photos and adds a front-facing 1.4-inch color "selfie" screen.

The HERO10 Black essentially contained the former features of the HERO9 Black, however, improved on certain functions. Most notably, the "HyperSmooth" feature introduced in the HERO7 Black and refined in HERO8 Black was improved on and named "HyperSmooth 4.0".

GoPro released the 3D HERO system in April 2011, which coupled two HD HERO cameras via a synchronization cable in a single housing to form a stereoscopic 3D camera. One of the cameras is used in upside-down mode.anaglyph to be viewed wearing red-cyan glasses.

In 2014, GoPro released an update as the Dual HERO system, which provides similar functionality using two HERO3+ Black edition cameras. The updated Dual HERO BacPac sync/link cable now has an asymmetric design: the right or primary camera (viewed with the lens facing away from the user) is larger than the left (secondary) camera, and the left camera is used in upside-down mode.

The GoPro GP1 is their own System-on-Chip with the main task of image processing. It replaces the earlier used Ambarella SoC"s and launched in the GoPro HERO6.Socionext.

"GoPro doesn"t like their HERO3 compared to Sony"s AS15?". DigitalRev.com. March 19, 2013. Archived from the original on March 17, 2015. Retrieved February 20, 2015.

"GoPro Hero 3 Black Edition: Seconda solo a se stessa". InsideHardware.it (in Italian). October 25, 2013. Archived from the original on September 24, 2015. Retrieved September 28, 2015.

"GoPro launches 3D HERO system; world"s smallest 1080p 3D Camera" (Press release). GoPro. April 4, 2011. Archived from the original on 12 November 2021. Retrieved 12 November 2021.

"Dual HERO System Workflow - Setup and Recording". GoPro Support. September 30, 2019. Archived from the original on 10 December 2021. Retrieved 9 December 2021.

The Media Mod snaps onto the Hero9 securely, after you remove the camera’s battery door. The bottom of the case is open, leaving revealed the fold-away mounts of the Hero9. Rubber buttons on the top and side press the corresponding buttons on the camera. There’s an included wind shield for the microphone. The plastic feels fairly sturdy, but not nearly as strong as the Hero9 itself feels.

What is more noticeable is the effect of the windshield. I didn’t have a particularly windy day during my testing, but there was enough that it was audible in the footage recorded with just the camera’s built-in microphones. It was far less apparent on the Media Mod mic with its foam windshield attached.

The Media Mod has two of its own accessories. The first is the tiny $50 Light Mod, which has 10 LEDs and comes with a rubber diffusion cover. It’s very bright for its size. The light is a little on the cool side for my tastes, but there are 3rd party companies that sell color filters for it. Alternately, you can get pretty much any LED light you want since the cold shoe on the Media Mod is a standard size. I do like the size of the Light Mod, however, since it doesn’t add too much to the overall bulk of the Hero9.GoPro Media Mod with Display ModGoPro

The other main accessory is the $80 Display Mod front-facing screen. This is a 2-inch flip-up screen that connects to the HDMI output on the back of the Media Mod. Since the Hero9 already has a front-facing color LCD, I don’t think this is quite as useful as it would be with the Hero8, but it certainly gives you a better view of what the camera is actually seeing. It also frees up the camera’s built-in screen to display more easily-readable info about your footage.

The Media Mod isn’t for everyone. The microphones on the Hero9 are quite good, so the built-in mic isn’t crucial in most situations. Low-light performance is good, for an action cam, so the light might not be vital for everyone either, especially if you have a phone on hand and can use its flashlight.

GoPro, HERO and their respective logos are trademarks or registered trademarks of GoPro, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

You can build a working GoPro Hero 6 and 8 from spare parts, and it can actually be cheaper than buying the whole camera. If you want a naked GoPro, this is way more convenient as you won’t have to spend time taking the camera apart.

AliExpress seems to be main place you can get GoPro spare parts from. I bought two hero 6 main boards and 3 camera sensor modules from there, all working as expected. Shipping to the UK took about 2 weeks, so it’s not too bad.

You might want to put it in a case, like the BetaFPV GoPro Lite case for the Hero 6. These cases also come with BEC board which makes powering them straightforward.

It’s useful having the back touch screen, you can use it to change camera settings, check if the main board and lens module are working correctly, and you need the screen to get the WiFi password to use the phone APP.

You can get a spare touch screen from tearing down a GoPro, or you can get it as spare part. The touch screen and buttons can be reused for your other Naked GoPro’s:

If you’ve never owned a decased GoPro before, maybe you should tear one down first, then you’d have the screen and buttons. But of course you can just bought the spare parts, it’s up to you.