lcd display software quotation

If you like collecting quotations like I do, then this instructable is for you. This instructable will show you how to put together a way to display your quotes for all to see, using things you probably already have around the house.

Any kind of quote will do, but because the picture frame scrolls through the images that will contain the quotes it works best if you keep the quotes short. Longer quotes, although interesting, may not remain on screen long enough to be read. If you have a number of longer quotations, see "Some Final Notes" at the end of this instructable for tips that you can consider for longer display times.

Look at the sample images stored on your LCD picture frame. For my frame, all of the sample images were 856x480 pixels. To determine this, right click on the image file, and select Properties. You should see a number of tabs, one of which should be called “Details.” Click on the details tab; under Image you should see a width and height. Write this down or keep the window open, because we will use it to set up PowerPoint.

Take the smaller of the two numbers (usually the height), and divide that by the larger number. In my case, 480/856=0.5607. Checking the table below (which shows common screen image ratios), I can see that the native images on my LCD picture frame are just about in 16:9 format.

Open PowerPoint, and start a new presentation. On the ribbon, click Design, Page Setup. In the setup dialog box, select the image format that matches the native format of your LCD picture frame. We do this because it helps prevent the software driving the frame from cropping or stretching the images unnecessarily. Click Home on the ribbon.

At this point, your presentation should have two slides: The initial default title slide, and your newly inserted blank slide. Click on the first slide (the title slide), click your right mouse button, and select delete. You should be left with a single blank slide in your presentation, sized to the native image size of your LCD picture frame.

In many cases, the picture won’t fill the slide because it’s in a different format than the native format for the LCD picture frame. Thus, we’ll need to resize the image to fit. At the same time, we don’t want to distort the image either. Here’s the most straightforward approach:

4. My LCD picture frame doesn’t let you change the display time for pictures, and some of the transitions happen too quickly to allow you to read the entire quote. You can do what I did, which was to make two copies of every slide. PowerPoint is creative in its naming; the slides are called Slide1.jpg, Slide2.jpg, et cetera. I named my copies Slide1a.jpg, Slide2a.jpg. The file system sorts the original and the copy together when the files are named this way, so every quote is displayed twice with an intervening transition.

5. If you don’t have a lot slides suitable for quotes, consider visiting a site like Interface Lift, which has a wide range of images in a variety of formats for desktop wallpapers. Chances are, you’ll be able to find images in a format suitable for the native format of your LCD picture frame.

Download our Crystalfontz LCD Software. We provide software for you to test many types of LCDs including character displays and graphic displays. Our character and graphic USB display modules can use CrystalControl2 to quickly set up the display. Bitmap to ePaper and Image2Code provide a simple interface to add an image to your display. We also USB LCD drivers and demonstration code for Linux.

This Windows application tests the capabilities of the video graphics system for 10-bit color support. It also generates images that demonstrate the benefits of 10-bit color depth on NEC MultiSync PA Series displays when using a DisplayPort video connection and a compatible video graphics card.

Although this robust activity demonstrates the well-known value of digital signs, companies still want to know about the cost of digital signage. Since we’re talking about modern technology tools, the cost factor includes hardware, installation, software, tech support, and more.

It is tempting to use free software to power digital signs. However, if the software is difficult to use or understand, it might end up consuming valuable IT resources.Also, free software often comes with fewer features which can impact how well the configuration can be set to meet your needs.

Remember, a poor-quality display may make images and text appear blurred or fuzzy. Screens can have a lot of glare. This can affect the readability of the screen. Instead of focusing only on low cost, it’s better to choose the package that gives you the most value while fitting within your budget.

Obviously, the digital signage display screen is the first thing that comes to mind when it comes to digital sign pricing. What should you consider when looking at digital displays and digital signage display prices?

A household smart TV model will be less expensive compared to a commercial-grade display. Still, there are some things to keep in mind when comparing consumer vs. commercial products.

Your signage will likely see heavy use, and commercial models are designed to be more durable. Plus, commercial displays come with longer warranties. Warranties are important since they are a hedge to cover against unforeseen equipment failure repair costs.

Finally, commercial displays usually have more processing power, which is important for more advanced messaging. This can impact how well your signage gets the message across, especially if you plan to use a lot of video imaging.

Where the screen will be placed as well as potential viewing angles are important. The display size depends largely on the screen location. You want it large enough to ensure visibility, but the display should also blend in well with the surroundings. For high-impact signage, you may even opt for a full wall-sized screen.

Digital Signage Display Price: Options to ConsiderTCL 65″ 6-Series 4K Roku Smart TV – This model offers superior 4K Ultra HD picture clarity combined with Dolby Vision HDR (High Dynamic Range) for crisp, clear images largely thanks to mini-LED and Quantum light technology. Price = $1,299.

Samsung QET Series 75″ (Commercial Grade) – Features eye-catching UHD resolution Crystal Display with ultra slim design. Includes MagicINFO Lite digital signage software. This display has a 3-year onsite warranty. It is built to operate 16 hours a day and 7 days a week. Price = $2,250.

The type of digital signage you implement will depend on your needs and objectives. Features such as touch screens and full-wall-sized displays are available. These designs come at a higher cost. If a high impact is what you want, then it might be worth looking into one of these more unique options.

There are many variables that go into video wall configuration. A general starting price range for a 2×2 video wall made up of 49” LCD monitors is about $19,000.

All digital signage requires a digital signage media player to stream content. Memory, processing speed, and different features come with each player. This is important to consider when deciding on a media player as all these factors can be impacted by your signage. Are low-cost digital signage media players worth it? It depends. Remember, the cost can influence performance. Media players are essentially computers designed for digital displays.

The player might be built into the unit, on more advanced display screens. Also, like displays, commercial-grade players are built for long play times and come with extended warranties.

As you can see, the extra $127 for the AOPEN gives you quite a boost in performance, but the NVIDIA is no slouch, especially for the money. You should take into account the total number of digital signage displays you want/have.

Some players come pre-loaded with free digital signage software. This can reduce the cost of purchasing each component separately. Digital signage software bundles make it easier to get your digital signage displays up and running.

A mini-computer can be mounted near or on the back of your digital sign display. Two advantages of mini-PCs are its versatility and is customizable. Some mini-PCs are very small and noiseless. So, if your needs are more complex, such as with advanced messaging, multimedia, or marketing integration, you may want to consider this alternative. These units can run from basic $100 models to powerful mini-PCs like theMSI MPG Trident 3, which retails at $1,399.

It’s difficult to quantify display mount costs as it depends largely on where the signage will be placed. For example, for displays mounted higher up on the wall, an angled mount will be needed. In other cases, requirements maybe include movable mounts with hinged arms.

Digital signage mounts can cost anywhere from $50 to $350+. Meanwhile, digital signage cabling should use high-grade cables, which are more durable and improve transmission speed. A 4K Displayport to HDMI Cable costs about $13 for 6 feet of cable.

Labor costs may vary widely by region and provider. Plus, there’s a huge difference between installing a simple 55’ wall-mounted display vs. an entire wall-sized screen. A simple single screen installation will cost around $200. For larger projects, the price can vary significantly so it pays to get two or three price estimates. Also, make sure your installer has digital sign installation experience since factors such as wiring, mounting, and screen angles should be considered.

There are several advantages to cloud-based software. Maintenance and updates are included in the cost, which is a huge benefit. Software-as-a-Service (SaaS) is another name for cloud-based software. Installing dynamic digital signage software on your own requires some tech expertise, plus you have to do all the troubleshooting on your own.  In both cases, there may be some IT training involved. For SaaS options, training will be minimal since backend upkeep is done by the provider. If you purchase and install the software yourself, you will have to manage in-house training as well.

Provisioning is the process of connecting and configuring your displays and players so that they can be used for digital signage purposes. This process requires specific expertise in the digital signage field. So unless you have the right tech staff, you’ll probably want to outsource this job.

Cost issues such as Internet access and networking all come into play at this level. A ballpark figure for provisioning costs maybe $250-$350 per display in addition to any broadband access costs. Other issues to consider here are networking and IT requirements. This will vary depending on what content you intend to stream and how it will be integrated with your communications systems. Finally, theADA signage requirementsshould be kept in mind as regulations continue to become more stringent as time goes on.

Graphic design, video creation, and other software-supported content (e.g. bus, train, and plane schedules) all have different use cases and costs. If you use stock photos, you’ll need to consider the cost of stock license purchase. If you create your own images, you’ll need to pay the photographer, models, etc. Video footage will be even more expensive.

Here’s a graphic representation of the costs (your costs may vary from this example depending on factors such as display size, hardware quality, labor costs, etc.):

Hardware doesn’t last forever. Moreover, software updates are important. This is because it will eventually become outdated if it’s not. This means you need to plan ahead for replacement.

The key here is to plan for this from the moment you install the technology, or even sooner. For instance, when purchasing, it makes sense to standardize (buy all the same model) if possible. This allows you to better predict the product lifecycle. Also, you might plan for a phased approach to refresh your hardware, perhaps starting with media players then later video displays in a stepwise fashion. As a rule of thumb, major pieces of technology usually last between 3-5 years. In addition, this varies depending on hours per week of use and environmental factors (outdoor vs. indoor, etc.).

A liquid-crystal display (LCD) is a flat panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals. Liquid crystals do not emit light directly, instead using a backlight or reflector to produce images in color or monochrome.

Although it’s true that optical bonding is a highly-effective display enhancement (increasing contrast/readability and ruggedization of the unit, while decreasing distracting internal and external reflections), for some applications it is an unnecessary expense. A typical office or lab setting may not present many of the factors that an outdoor or rapidly changing environment will.

Sourcing from a single company creates better quality and efficiencies. This, in turn, leads to faster completion, which means a greater liklihood that product or software gets to market faster, and at a reduced cost. Read More

General Digital offers a no-obligation SSRA (Software Services Requirements Analysis), which identifies areas that you can handle in-house, and other areas where you would benefit by retaining outside help. Read More

All three of its business units—Display Systems, Software Services, and Optical Bonding Laboratories—are under one roof. This allows for efficient and effective interdisciplinary engineering, support and design efforts for seemless implementation. Read More

“Turing Smart Screen” is a low-cost 3.5-inch USB-C display that connects to systems with a USB port, and works with Windows, Linux (including Raspberry Pi), MacOS, and other operating systems that support Python3.

But contrary to my initial assumptions, it does not exactly act as a second monitor, and instead, it is an information display, originally designed to show resource utilization, e.g. CPU and memory usage, in Windows, and controlled through commands send to the USB port.

The manufacturer says it works with Windows only using its own software, and not AIDA64. The Windows software features functions to change the theme, adjust brightness, display the weather forecast, and so on. (Also see mirror download link on MEGA)

The display is shown as a serial device in the host system, and the open-source software can display a custom picture, text, and a progress bar, as well as clear or turn off the screen, reset the display, and set brightness, but screen rotation is not implemented yet.

The display ships with a one-meter USB Type-C cable, a stand, and double-sided tape, plus other accessories like a USB hub, depending on the selection option. I initially found it

Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.

PG Technologies supplies Liquid Crystal Display (LCD) Technology to a variety of industries. Using the latest production processes, our manufacturing facility has developed a wide range of products capable of meeting today’s market demands.

We can assist with design and development of all types of custom LCD panels and modules, e.g. TFT, TN, HTN, STN, FSTN and COG types. All products are manufactured in a state of the art manufacturing facility with an annual output and volume now standing at 42,000,000 panels and 1,170,000 modules.  Diverse production processes provide flexibility to address all of your prototype, short runs to large production requirements.

Using the latest design software, our engineering team has developed a wide range of products suitable for various applications, including components servicing the utility and analytical instrumentation industries. Some of the advantages that we offer are as follows:

At PG Technologies, a sharp focus is placed on continuous product and process improvement. We are continually introducing new custom and standard LCD’s platforms for both the domestic and international markets. If you are interested in any of our products, or have a customized need to fill, please contact us. Our world-class pricing and flexible manufacturing lead-times are among the most competitive in the industry. We look forward to working with you on your LCD needs.

You may cancel your Mulberry Protection Plan within 30 days of purchase by contacting Displays2Go at 1-800-572-2194. If there has been no claim filed against the plan, the plan will be void and you will receive a full refund.

For our first project, we’re using both the inbuilt LCD screen and WiFi module to get text data of famous quotes. Since we’re all nerds at DIYODE, we’ve of course chosen to choose famous programming quotes. The center button of the Wio Terminal will be used to load a new quote and display it on the screen.

WiFi is involved here because we’re using a simple Web API to gather data and display it live. Since it’s connecting to WiFi, we could connect it with virtually any other web interface and make it work.

The ‘wasPressed’ variable will be used during the main loop to ensure we only display one new quote when the button is pressed, and not to continue looking for quotes when the button is held. This is typically referred to as state detection, and we’ll talk about this shortly.void setup() {

Text wrapping is the process of bringing text fields down to the next line on the screen if it’s too long – which is often the case with quotes. The LCD library does have this function built-in, but it wasn’t cooperating for us, so we wrote it ourselves!

Essentially, we’re taking ‘chunks’ out of the text with the substring function and writing each to one line of the Wio Terminal’s LCD screen. The ‘len’ variable describes the number of characters on each line. If the function is confusing, just change some values and observe the effects!

Liquid Crystal Displays or more commonly known as LCDs are one of the most common electronic components which help us interact with an equipment or a device. Most personal portable equipment and even gigantic industrial equipment utilize a custom segment display to display data. For many portable consumer electronics, a segment LCD display is one of the biggest contributors to the overall cost of the device, hence designing a custom segment display can drive the cost down while also utilizing the display area in the most optimum manner. These displays have the lowest cost per piece, low power requirements, and a low tooling fee too.

At first thought, designing a custom segment LCD might look like a Herculean task, but trust me that it is easier than it seems. In this article, we have summarised and compared the display types and available technologies which are required to construct a custom segment LCD. We have also provided a flowchart that can act as a step-by-step guide while you design your own custom LCD. We have also provided the process we followed, a require gathering sheet we used for communicating our needs to the manufacturer, and a few other data and the quotation we received from the manufacturer.

Icons: A silhouette of any shape can be placed on the glass which enhances the ability to display data. For example, a symbol of a heart can be made to denote heart rate or an icon for a low battery to show that the battery needs to be charged. Icons are counted as a single pixel or segment and can give a lot more details than similar-sized text.

LCD Bias– It denotes the number of different voltage levels used in driving the segments, static drives (explained later in this article) only have 2 voltage levels or 2 bias voltage while multiplex drives have multiple voltage levels. For example, 1/3 will have 4 bias voltages.

LCDs utilizes the light modulating properties of liquid crystals which can be observed by using polarizing filters. Polarizing filters are special materials that have their molecules aligned in the same direction. If the light waves passing through polarisers have the same orientation as the filter, then the molecules of lights are absorbed by the filter, hence reducing the intensity of light passing through it, making it visible.

A custom LCD is important for maximizing the efficiency of the display area by adding custom symbols and characters. It also helps in reducing the cost and improving energy efficiency of the product. A higher number of custom symbols and specified placement of numerical and alphanumerical characters make the display more informative and readable for the user. This makes it look better than the plain old boring displays we get in the market. Furthermore, we can specify the viewing angle, contrast, and other specifications which can increase durability or give a better value for money for our intended usage.  A typical Custom Segment display is shown below, we will also show you how to design and fabricate the same further in the article.

The LCD display doesn’t emit any light of its own, therefore it requires an external source of illumination or reflector to be readable in dark environments.

While designing a custom segment LCD display, we have the leverage of choosing a lot of parameters that affect the final product. From the color of the display to the illumination technique and color of illumination as well as the type of input pins. Some important considerations we need to take while designing a custom 7 segment display are - the type of display, i.e. positive or negative, illumination method, driving technique, polarising type, and connection method. All these design criteria are explained below:

Positive and negative displays can be easily distinguished by the colour of the background and characters. Some common differences between the positive and negative displays are:

So, which one should you choose? When the displays are to be used in areas with higher ambient light, we should select positive segment LCD display as it has better visibility than negative segment LCD displays without using a backlight.

As we know that LED displays don’t emit any light, hence to illuminate it and make it visible in a dark environment, we can use different methods of illumination. The most common LCD Illumination methods are compared below:

For displays that need to be used for budget-friendly devices that should be small and rugged, LED lights are preferred for the displays due to the high durability and low cost of operations. For high brightness, CCFL and Incandescent lights can be used.

A polarizer film is the most important component of an LCD display, which makes it possible to display characters by controlling the light. There are 3 types of polarizers that can be used in the LCD display, the properties and difference are given below:

Displays can be categorized into two types, passive displays, and active display, passive displays are simpler to construct as they have 2 connections at each segment, the conductors comprise of an Indium Tin Oxide to create an image, whereas the active displays use thin-film transistors (TFT) arranged in a grid. The name is due to its ability to control each pixel individually.

If your displays have fewer segments, then static LCD drive is preferred as it is easier to control and cheaper to construct, and has a better contrast ratio. But let’s say that if the number of segments in the display are more than 30-40 then a multiplex LCD drive should be preferred as it has multiple common pins, hence reducing the total number of pins required to drive the display.

Choosing a connector type!!! For the prototyping phase or if you need to connect your LCD display on a Microcontroller directly, a pin type connector is the best and most economical option you have. If you need to connect your LCD display in a final product with a high volume of production which also requires to be extremely durable, but at the same time should not take up a lot of space, a Flex type LCD Connector will work best for you

LCDs have limited viewing angles and when seen from an angle they lose contrast and are difficult to be observed.  The viewing angle is defined by the angles perpendicular to the center of the display towards its right, left, up, and down which are denoted by the notations 3:00, 9:00, 12:00, and 6:00 respectively. The viewing angle of LCD can be defined as the angle w.r.t. to the bias angle at which the contrast of segments is legible.

To improve the viewing angle in an LCD, a Bias is incorporated in the design which shifts the nominal viewing angle with an offset. Another technique is to increase the Voltage, it affects the bias angle, making the display crisper when viewed from a direction.

For example, the viewing angle of a TN type TFT LCD is 45-65 degrees. Extra-wide polarising film (EWP) can increase the viewing angle by 10 degrees, using an O film polariser can make the viewing angles 75 degrees but these come at a cost of reduced contrast.

LCD Control chip or LCD driver chips can be mounted on the flex cable, display, or externally on a PCB. The placement of LCD control chip can affect the cost and size of the display. The 2 most common methods of chip placement are-Chip of Board (COB)and Chip on Glass(COG) which are described below:

We planned to design an air quality monitoring system for which we needed a custom segment LCD panel for an air quality monitoring device. Our product needs to display the following data: 2.5-micron and 10-micron particulate matter (PM) suspended in the air; the units should be in parts per million (PPM). CO2 in the air in PPM along with total volatile organic compounds present in the air in parts per billion (PPB). To make the product more usable, we included time in 24-hour format, Temperature in ºC, Battery status, loudspeaker status, Bluetooth status, and Wi-Fi status. And for some personal touch, we also added how good the air quality in the room is by using 3 different smileys.

We realized that it was impossible to provide all these data in a generic LCD available in the market, thus decided to build a custom LCD for our project.

A step-by-step flowchart is shown below to walk you through each and every step of selecting components and getting your custom segment LCD manufactured.

We started by listing down our requirements and drew a mock-up of the display on paper. After finalizing the placement of all the segments and icons on the prototype sketch of the display, we then decided which all icons and segments have to be kept on for the whole time and which needs to be driven. Realizing that there are too many segments, characters and icons, hence we selected a multiplex drive with 8 common pins which helped us bring down the total pins from an estimated 180 pins to less than 40 pins.

Since the device was meant to be used inside houses and offices, which are more often than not well lit and protected from environmental conditions, we opted for a positive mode display. For superior contrast ratio and better viewing angle, we chose a Film Super Twisted Nematic Display (FSTN) with a drive condition of 1/8 Duty and bias of 1/4.

Usually, the displays are mounted at a height of 4.5 feet from the ground, thus the viewing direction was selected to be 12"O clock with an operating frequency of 64Hz. We selected a Transmissive polarizer for the front glass and a reflective polarizer for the rear glass so that the natural light can pass through the front panel and the display can achieve the maximum contrast without the need for backlighting and we opted for the pin type connectors as they are easy for prototyping and are suitable for harsh environment with a lot of vibrations and shocks which best suited our purpose.

In the above image of a custom display design, we sent to the manufacturer, the red lines over multiple characters indicate that all these are considered as a single segment. For the sake of simplicity, we added test like T, S, U, B to denote Text, Symbols, Units, and Battery respectively. These characters were followed by numbers to simplify communication between us and the manufacturer. For example, if we needed any particular text or symbol to remain on, we can easily specify that to the manufacturer by using the corresponding text for that segment.

We mailed our requirements to multiple LCD manufacturers, (you will find a lot of LCD manufacturers on the Internet). Most LCD manufacturers have competitive pricing, and reply within a week. A sample requirement sheet is shown above which a customer needs to fill to specify all the details to the manufacturer.

This is a sample Custom Segment LCD quotation we got from one of the manufacturers. As you can see, the cost is based on the quantity. Higher the quantity, lower the cost. Apart from the cost per quantity, there is one more component called tooling fees. Tooling fee is a one-time fee charged by the manufacturer. It is for the technical design, support, and customization of the product. Customization of PCB or tooling of LCD can drive the tooling price higher or lower.

A custom segment LCD can help you personalize your product while also saving the overall cost of your product. The whole process will take you around 2-3 months, which will include the designing phase, prototyping phase, and getting your custom segment LCDs delivered to your doorstep. Higher ordering quantity will reduce the cost per piece of each unit, thus driving down the cost of your final product.

An Industrial OEM customer contracted RPC Electronics to manufacture the LCD display and embedded computer highlighted here, utilized in industrial applications. Integrated hardware included a single board computer, industrial level chassis, and industrial capacity power supply. The fabricated display was touch operated, measuring 8.4” and featured an anti-reflective film and backlighting capabilities. We also provided the necessary cabling and software, for the effective operation of the unit and accurate processing of large amounts of raw data, which is critical to the productivity levels of most industrial systems.

The screen and embedded computer were manufactured upholding recognized standards for quality and integrity, meeting UL/CSA as well as FCC class standards. Turnaround time for this fabrication was 12 to 14 weeks, produced and shipped to customers in the US. For more details about this LCD display and embedded computer fabrication, or our capabilities to provide the single board computers relied on by modern industrial networks as well as other custom electronic parts please see the table below or contact us directly.

As an example of the kind of traps out there, let’s say you want to run embedded Linux and so you select a processor for which the manufacturer offers a Linux port. Great – all the driver work is done, right? The inconvenient truth is that for silicon vendors, software is not their strength, and saying they run Linux is mainly a feature checkbox. The typical Linux they provide is a cobbled-together proof-of-concept, not a production-ready and tested platform.

Good embedded Linux software programmers are hard to find and expensive. They require management that knows enough about Linux to make the decisions like what file system to use, what device to boot from, which system upgrade mechanism to support, and so on.

Freescale:i.mx28 SoC is low cost, can drive up to 7” display, wide variety of interfaces including CAN. Vybrid line for small displays has frame buffer on-chip.

Planar® CarbonLight™ VX Series is comprised of carbon fiber-framed indoor LED video wall and floor displays with exceptional on-camera visual properties and deployment versatility, available in 1.9 and 2.6mm pixel pitch (wall) and 2.6mm (floor).

From cinema content to motion-based digital art, Planar® Luxe MicroLED Displays offer a way to enrich distinctive spaces. HDR support and superior dynamic range create vibrant, high-resolution canvases for creative expression and entertainment. Leading-edge MicroLED technology, design adaptability and the slimmest profiles ensure they seamlessly integrate with architectural elements and complement interior décor.

From cinema content to motion-based digital art, Planar® Luxe Displays offer a way to enrich distinctive spaces. These professional-grade displays provide vibrant, high-resolution canvases for creative expression and entertainment. Leading-edge technology, design adaptability and the slimmest profiles ensure they seamlessly integrate with architectural elements and complement interior decor.

From cinema content to motion-based digital art, Planar® Luxe MicroLED Displays offer a way to enrich distinctive spaces. HDR support and superior dynamic range create vibrant, high-resolution canvases for creative expression and entertainment. Leading-edge MicroLED technology, design adaptability and the slimmest profiles ensure they seamlessly integrate with architectural elements and complement interior décor.

Planar® CarbonLight™ VX Series is comprised of carbon fiber-framed indoor LED video wall and floor displays with exceptional on-camera visual properties and deployment versatility, available in 1.9 and 2.6mm pixel pitch (wall) and 2.6mm (floor).

Carbon fiber-framed indoor LED video wall and floor displays with exceptional on-camera visual properties and deployment versatility for various installations including virtual production and extended reality.

a line of extreme and ultra-narrow bezel LCD displays that provides a video wall solution for demanding requirements of 24x7 mission-critical applications and high ambient light environments

Since 1983, Planar display solutions have benefitted countless organizations in every application. Planar displays are usually front and center, dutifully delivering the visual experiences and critical information customers need, with proven technology that is built to withstand the rigors of constant use.

The new line of 3.5” TFT displays with IPS technology is now available! Three touchscreen options are available: capacitive, resistive, or without a touchscreen.

Web-based video conferencing and collaboration software subscription with simple, go-to functionality including annotation, screen sharing and recording – no download required, just a browser. Live, on demand help and unlimited, free, online training.

Unparalleled interactive whiteboard and annotation software. Record your brainstorm sessions, save your whiteboard work and restart anytime, one-click to access Bing or Google search.

DaVinci Resolve is the world’s only solution that combines editing, color correction, visual effects, motion graphics and audio post production all in one software tool! Its elegant, modern interface is fast to learn and easy for new users, yet powerful for professionals. DaVinci Resolve lets you work faster and at a higher quality because you don’t have to learn multiple apps or switch software for different tasks. That means you can work with camera original quality images throughout the entire process. It’s like having your own post production studio in a single app! Best of all, by learning DaVinci Resolve, you’re learning how to use the exact same tools used by Hollywood professionals!

The DaVinci Resolve color page is Hollywood’s most advanced color corrector and has been used to color and finish more high end feature films and television shows than any other system! It’s also approachable with features designed to make it easier for new users to get great results while they continue to learn the advanced tools. For example, new primary control sliders will be familiar to anyone who’s used image editing software, making it easy to adjust contrast, temperature, midtone detail, saturation and more. The color page has an incredible range of primary and secondary color grading features including PowerWindows™, qualifiers, tracking, advanced HDR grading tools and more! Learn More

With all the different workflows and systems available, you need a post production solution that’s compatible and open enough to handle anything! DaVinci Resolve can be used with any type of storage ranging from direct attached hard drives to NAS and SAN systems. You can extend DaVinci Resolve with third party Open FX and audio plugins, or add third party title and motion graphics templates. New workflow integration and encoding APIs let developers integrate workflow and asset management systems with DaVinci Resolve. Plus, it works with all major file formats and post production software, making it easy to move files between DaVinci Resolve, Final Cut Pro, Media Composer, and Premiere Pro.

Designed in collaboration with professional sound engineers, Fairlight hardware consoles streamline your workflow, acting as a natural extension of the software. The intuitive, task based design adapts automatically, putting the controls you need right at your fingertips when you need them. That means you"ll spend more time being creative and work faster than using just a mouse and keyboard! The Fairlight Desktop Console is a complete mixing console that’s ideal for use in home studios, small suites or on the road. You can also install Fairlight Studio Console components into your own desk or purchase a pre‑configured multi bay Fairlight console for dedicated audio suites and scoring stages! Learn More

The best creative tools shouldn’t be limited to Hollywood. That’s why there’s a free version of DaVinci Resolve, so you can learn how to use the same tools that professional Hollywood artists use. DaVinci Resolve is designed to inspire creativity so you can focus on doing your best work. Once you learn the software and start using it for more work, you can purchase DaVinci Resolve Studio which adds tons of additional effects, 3D and more. Adding an editor keyboard, color control panel, or audio console lets you work even faster because you can use both hands at the same time, allowing you to be more creative and do things that are impossible with a mouse!