playstation 1 lcd screen factory

I bought the screen from Total Console for my husband. He has a few old PlayStation games he likes, and wants to be able to play now and again, so I figured this would be the best way allow him to do that and not have to have it hooked to the TV all the time. I had some difficulty, but it was not the fault of Total Console. Rather, there were some things I had to learn along the way that I will pass along that may help someone else.

1. The screen is touchy. It may not work with the standard PSOne adapter (model SCPH-113). You may need the adapter that was specially made for this screen (it has a little more juice), which is model SCPH-121. I found one on eBay. When using the 113 adapter, I would get sound, and shadows, but the screen was really dark and you could not make anything out.

2. The screen is fussy. Even after obtaining the correct adapter, I was getting the shadows. Total Console was extremely helpful, and I was setting up a return when, on a whim, I plugged it into the wall (I had prior used an extension cord and a power bar - the outlets in my house are oddly placed). It lit right up. I was amazed. As long as it"s plugged into a wall, it works great. (Our screen doesn"t work correctly with the 113 adapter, even plugged into the wall - a google search showed that this is sometimes an issue, other times not).

PSOne LCD Screen prices (Playstation) are updated daily for each source listed above. The prices shown are the lowest prices available for PSOne LCD Screen the last time we updated.

The LCD Screen (for PS one) is currently the only officially licensed monitor for the PS one that"s available on the retail market. There have been a few third-party manufactured PS one LCD screens that have seen their way onto retail store shelves thanks to companies such as Interact, Mad Catz and Electro Source, but until just recently we hadn"t seen one that came with the Sony seal of approval.

Does this really mean anything? Based on what we"ve seen of all the products, not really. The officially licensed moniker means a lot more when you"re dealing with things like memory cards and controllers because there"s a lot more reverse engineering going on because unlicensed third parties aren"t obliged to information about the console and how it works. But, in the case of an LCD screen for the PS one, it"s just a monitor that must work with the system"s output and be attachable to it. Not all that hard to do with or without Sony"s licensing.

At any rate, the Sony name generally stands for quality (let"s forget about the skipping PlayStations and the "Disk Read Errors" on the PS2 for a minute) and its official monitor, the LCD Screen (for PS one), is a top notch and well-built peripheral for the console.

When you pick up one of these units, you get yourself one of the LCD Screens, an AC Adaptor (the exact same kind that comes with the PS one unit), and an instruction manual. The screen is a 5" (diagonal width) Thin Film Transistor (TFT) liquid display and to the left and right of it you get 1 1/2 x 1 1/8 in 1.0 watt stereo speakers. Also on the front of the unit and below the screen you have button controls to adjust the brightness of the screen and the volume of the speakers.

The unit fits snuggly onto the PS one with the screws that are on its rear and looks completely stylish when mounted onto the console. It"s also extremely thin and lightweight, which really lends itself to being portable, which is what the screen and the PS one unit are intended to be.

The screen provides excellent video quality with very black blacks, very white whites and excellent color separation and overall picture quality. In fact, thanks to the reduced screen size and general clarity of the picture, most PlayStation games actually look better when being played on this PS one Screen than when played on a regular television set. It"s a lot harder to notice the low resolution of the textures and the general blockiness of polygonal models that are fairly common in most PlayStation games.

And despite the small size of the screen, you won"t experience any problems reading text in most text-heavy games like role-playing games. We were able to test Chrono Cross, Final Fantasy VII, VIII, and IX, Legend of Dragoon, and Vagrant Story and found that the text in each of those games were completely legible. With Vagrant Story, the font"s unique style made it a little less clear than the others, but still didn"t prove to be a problem. The only times that we noticed issues with reading text was during some end-game credits where the text size was much smaller than normal.

If you take a look at the back of the unit you"ll see the DC In 7.5V connector, AV Multi connector (to connect it using a standard PlayStation AV cable to television), an AV IN jack, and a headphone jack.

Sadly, its AV IN jack is one that requires an SCPH-180 U AV connection cable that"s used to connect video equipment such as camcorders to the LCD screen and not standard stereo AV connections like you"ll find in some of the third party products. What this means is that you won"t be able to easily use this as a portable monitor for other consoles like the PlayStation 2, Dreamcast, and Xbox, which is something that is possible with some of the third party units.

Even with the omissions, which include the lack of stereo AV input jacks and Car Adaptor this is a fine PS one peripheral that you really ought to consider picking up for your system if you"re looking to make it a little more portable. The monitor provides excellent picture quality and decent enough sound and looks stylish and extremely cute when attached to the PS one console. It"s currently priced at $129.99, so it"ll cost more than the unit itself, but it"s actually a decent price for a unit of this kind.

A bottom-up comparison of the SCPH-1000, SCPH-3000, SCPH-5501, and SCPH-9001. The SCPH-900x revision saw the removal of the parallel I/O port while the RCA connectors were removed in the SCPH-550x revision and the S-Video port was removed in the SCPH-1001 revision.

The PlayStation went through a number of variants during its production run, each accompanied by a change in the part number. From an external viewpoint, the most notable change was the gradual reduction in the number of external connectors from the back of the unit. This started very early on with the original Japanese launch units; the SCPH-1000, released on 3 December 1994, was the only model that had an S-Video port, which was removed on the next release.printf function and developers had to use another function instead.

The PAL region consoles from SCPH-1002 up to SCPH-5552 were different from the systems released in other regions in that they had a different menu design; a grey blocked background with square icons for the Memory Card (an icon showing a PlayStation with 2 memory cards inserted) and CD player (an icon with musical keyboards) menus. The CD player also included reverberation effects unique to those systems until the release of the PS one in 2000, which featured a slightly modified version of the BIOS.

With the release of the SCPH-5000 series being produced only in Japan, it followed the same exterior design as the Japanese SCPH-3xxx series, its only differences being that it was switched to Rev. C hardware (same as late 1001/1002 units) with some upgrades to flawed components from previous models and a reduced retail price. This was followed by the first major consolidation, SCPH-550x/5001 and PAL-exclusive SCPH-5552 units, released in April 1997. This model further addressed the reliability issues with the disc drive assembly by placing the drive further away from the power supply in order to reduce heat; the chipset was also redesigned to use digital servo for focus/tracking and also to auto-calibrate the drive, as opposed to manual gain/bias calibration on earlier models. Also, shielding and PSU wiring were simplified, and from the SCPH-5001 on the RCA jacks and RFU power connectors were removed from the rear panel and the printed text on the back was changed to reliefs of the same. Starting with the SCPH-550x series, PAL variants had the "power" and "open" buttons changed from text to symbols, something that would later appear on the redesigned PS one. Originally, the PlayStation was supposed to have provision on Video CD support, but this feature was only included on the Asian exclusive SCPH-5903 model.

These were followed by the SCPH-700x and SCPH-750x series, released in April 1998—they are externally identical to the SCPH-500x machines, but have internal changes made to reduce manufacturing costs (for example, the system RAM went from 4 chips to 1, and the CD controller went from 3 chips to 1) and these were the last models to support parallel port for Gameshark devices and Xploder Pro. In addition, a slight change of the start-up screen was made; the diamond remains unchanged but the font used for Sony Computer and Entertainment is now consistent, making the words appear smaller than the diamond overall, and the trademark symbol (™) is now placed after "Computer Entertainment" instead of after the diamond, as it was on the earlier models. New to the SCPH-700x series was the introduction of the "Sound Scope" – light show music visualizations. These were accessible by pressing the Select button while playing any normal audio CD in the system"s CD player. While watching these visualizations, players could also add various effects like color cycling or motion blur and can save/load their memory card. These were seen on the SCPH-700x, 750x, 900x, and PS one models.

The final revision to the original PlayStation was the SCPH-900x series, released in May 1999. These had the same hardware as the SCPH-750x models, except the parallel port was removed and the size of the PCB is further reduced. The removal of the parallel port is partially due to the fact that Sony did not release an official add-on for it; it was used for cheat cartridges, and for the parallel port to defeat the regional lockouts and copy protection. The PlayStation Link Cable connection was supported by only a handful of games. The SCPH-900x was the last model to support it, as the Serial I/O port was removed on all PS one models.

The PS one, released on 7 July 2000, was originally based on essentially the same hardware as the SCPH-900x; the serial port was removed, the controller/memory card ports moved to the main PCB and the internal power supply replaced with an external 7.5VDC power adapter with the other required power rails being generated internally on the main using a mixture of regulators and DC/DC converters for the various rails. It also incorporated a slightly modified version of the menu design previously used only on PAL consoles. The later revision (still designated as SCPH-10x but with a different PM-41(2) main circuit board) was functionally identical, but reduced manufacturing cost for a last time by moving to more highly integrated chips, namely the replacement of external RAM with on-chip RAM, which both reduced the parts count and allowed the use of smaller and cheaper packages by reducing the number of pins required.

There were also debugging consoles - these were generally in either blue or green cases, although there were some special production units (mostly intended for use as show demo units) that were grey, the same as the retail consoles. The debug units were designed to be as close as possible to retail consoles, so they only had 2MB of ram (the developer boards had 8MB) and had standard retail boot ROMs. The only real difference is that the CD controller was reprogrammed so that it would identify any disc that had a data track as being "licensed", rather than requiring the region code in the lead-in that was present on pressed PlayStation CDs. This was done to allow developers to burn games to CD-R for testing. A side-effect of this was that most debug consoles would also boot discs from other regions (one notable exception being the later NTSC:J debugs, which only boot Japanese titles), although this was not officially supported. Sony made specific debug consoles for each region, and the TRC (technical requirement checklist) provided by Sony for each region required testing the title on the correct debug stations.

The reason for the two different case colors was a hardware change that Sony had made fairly early in the PlayStation production cycle - the original machines were built using Rev. A (early Japan market units) or Rev. B (later Japan units, US and Europe) hardware, both using the same GPU with VRAM to store the video data. Later models used Rev. C silicon and SGRAM - although the two chipsets had very similar performance, and Rev. C was explicitly designed with compatibility in mind, they were not identical - the Rev. C version was significantly faster at doing alpha blending, and hence the PS "semitransparent" writing mode - it was also rather slow at certain screen memory block moves (basically, ones involving narrow vertical strips of the display) on top of this there were some minor hardware bugs in the older silicon that had been addressed by including workarounds for them in the libraries - the later library versions checked the GPU type at startup time and disabled the patches if they were not needed. Because this made the two machine types quite significantly different from each other, the developer had to test the title on both machines before submitting. The blue debugs (DTL-H100x, DTL-H110x) had the old silicon and the green ones (DTL-H120x) had the new silicon.

In 1997, Sony released a version of the PlayStation called the Net Yaroze. It only came via mail order and was more expensive than the regular PlayStation ($750 instead of $299 for the original PlayStation). It had a matte black finish instead of the usual gray, and most importantly, came with tools and instructions that allowed a user to be able to program PlayStation games and applications without the need for a full development unit, which was more expensive than a normal PlayStation (official development kits cost around $50,000.00 at the time). It was only available to approved video game developers, who needed to sign an agreement that they wouldn"t distribute their games to anyone else or try to reverse-engineer the hardware. The Net Yaroze lacked many of the features the full developer suite provided, lacking the on-demand support and code libraries that licensed developers had.Ridge Racer ran entirely from the system RAM (except for the streamed music tracks).regional lockout; it would play games from any territory. It would not however play CD-R discs, so it was not possible to create self-booting Yaroze games without a modified PlayStation.

The PS One (officially stylized as PS one and alternatively spelled PSOne and PSone) is a smaller, redesigned version of the original PlayStation platform.PlayStation 2.

Sony also released a version with a 5-inch LCD screen and an adaptor (though it did not have a battery: it is powered by plugging the adaptor in a main socket, or in a car). It was called the Combo pack. However, it includes a headphone jack (for headphones or other audio connection) and an AV mini jack for connecting camcorders or other devices.

Available in Midnight Blue as a promotional item to commemorate the 10 millionth PlayStation sold, this is a Japanese-region console that has a unique BIOS based on the USA NTSC-U/C version that allowed imported games from any region to be played.

The first batch of PlayStations used a KSM-440AAM laser unit whose case and all movable parts were completely made out of plastic. Over time, friction caused the plastic tray to wear out—usually unevenly. The placement of the laser unit close to the power supply accelerated wear because of the additional heat, which made the plastic even more vulnerable to friction. Eventually, the tray would become so worn that the laser no longer pointed directly at the CD and games would no longer load. Sony first addressed the problem by making the tray out of die-cast metal, and additionally also placed the laser unit farther away from the power supply on later models of the PlayStation.

Some units, particularly the early 100x models, would be unable to play FMV or music correctly, resulting in skipping or freezing. In more extreme cases the PlayStation would only work correctly when turned onto its side or upside down.

"PlayStation Cumulative Production Shipments of Hardware". Sony Computer Entertainment. Archived from the original on 2011-05-24. Retrieved 2012-01-27.

Change ResolutionChanges the display resolution to 480p when the PS4 console is restarted. This option can be helpful when troubleshooting issues with blank screens.

Restore Default SettingsRestores the PS4 system to the default factory settings. Restoring default settings won’t delete content on console storage such as games, apps, screenshots, video clips, and saved data.

Set HDCP Mode (PS4 Pro only)If your PS4 Pro console is connected to a 4K TV that doesn"t support HDCP 2.2 (please refer to your TV manual), it may not be able to display an image when playing 4K games or 4K video streaming. To see an image, choose this setting and select [2. HDCP 1.40 Only] on the next screen*.

Country/Region of Manufacture:ChinaIncludes AV Cable, OEM Power Cable, LCD Screen, One Generic Controller, and System. Very Good Condition Sony PlayStation Ps One & LCD Screen Combo Console PS1.

The SCPH-1001 was the first (pictured at the bottom) version and included all the ports listed below.  The SCPH-3001 (middle) saw the removal of the direct A/V Out jacks and the SCPH-9001 (top) removed these in addition to the Parallel I/O port.

A/C In:The Original PlayStation had an integrated power supply and used a universal two-prong Polarized AC Wall cable which would plug into this port (look closely and don’t force it! these cables only go in one way.)

Serial I/O:Included on all original models, this peripheral port was for the PlayStation Link Cable – It allowed for two consoles to be connected in order to play compatible multiplayer games on separate consoles.

AV Multi Out:Included on all original models, this port was for use with SONY’s AV to RCA cable which was included in box.  This same port and cable would eventually be used for the PlayStation 2.

A/V Out:Only available on the first version of the first model – SCPH-1001 (US) These ports allowed for direct input with a set of standard RCA cables – later only the AV Multi Out port would be available for use with the SONY’s AV to RCA cable.

Parallel I/O:A Standard Parallel interface allowed for peripherals – No official attachments from SONY (for consumers), but a handful Flash Memory add-on and Action Replay type devices were made to work for PlayStation using this port.  Only available on the SCPH-1001 and SCPH-3001 models in the US.

Hello guys, I found my brothers PlayStation 1 in the garage, was laying around and unused for about 5 years or so. The PS1 was shelved dust free in a bag all the time.

After I connected it to my LCD TV, the screen was only in black & white. So I thought, it must be a problem with the TV and tried 3 other TV"s, one of them was and old cathode ray tube. But same result. Also tried to connect it through a HD upscale Box and connect it with an HDMI to my LCD. Same result.

I use the composite video cable for the connection. So I thought, the problem must be here, and bought 2 other of them. They were also used, and the seller said, that 1 of them is fully functional, or even 2. So can not say 100% that they are not defective, too, but same result with the other 2 composite cables.

Also opened the PS1 and cleaned it a little from dust and stuff. Without any improvement. It is a PAL console and I tried it with original PAL CD"s but all of them are colorless. In the inside, there are some black cables soldered, that don"t look like legit from factory. Maybe a Modchip or something is in it. Doesn"t unscrew it completely so, can not confirm it 100%, but can it be that the Mod is setting the PS1 in NTSC and then it is black & white ?

Details: The LCD Screen is 5" diagonally and delivers incredibly crisp resolution and stereo sound. Plug in your own headset and enjoy games without disturbing anyone else. The AV "in" jack allows owners to plug in their Sony camcorders and enjoy video of the family vacation anytime, anywhere.