keurig lcd screen in stock

Technology is great… until it stops working. Your fancy Keurig 2.0 comes with a touch screen display. Many owners have experienced a sudden issue with the Keurig 2.0 touch screen not working properly. It may dim, blank, or have lines running through it. Here are some simple things you can try to do to fix it.

If the reset doesn’t solve any issue you are having with your screen, you may want to try simply wiping it down. It might sound crazy, but this simple fix has worked for several Keurig owners on social media.

Turn the machine off. Spray a little bit of Lysol or Windex onto a soft cloth or paper towel and wipe the screen. Be sure clean around the edges where the bevel meets the screen. Dirt and dust can get trapped in there and cause the Keurig screen to not be working the right way.

If none of the above solutions worked for your Keurig 2.0, you should contact Keurig support. If you registered your machine and it is still under warranty, they may be able to help you fix it.

Keurig 2.0 comes with newly developed innovative technology and has acquired a positive rating globally since it delivers silky and swift coffee in a matter of seconds. Keurig 2.0 brewers were launched in 2014, and after a few years, they were discontinued.

Keurig 2.0 comes with a touchscreen Display. However, many Keurig machine owners complained about the sudden issue with Keurig 2.0 touch screen not working properly. The issue is mostly dim, black, or lines running through the machine. Some customers have also reported broken screens on Keurig 2.0

Normally the most common Reason for the Keurig touch screen not working is a software issue. This problem can easily be countered by resetting the machine or simply restarting the machine.Reset the machine

If resetting the machine doesn’t work for you, try cleaning the touch screen of your Keurig machine. This simple fix appears to have worked for some Keurig owners.

All you need is to turn off the machine. Wipe the screen with a soft cloth or paper towel dampened with some cleaning agent or water. Make sure to clean the screen thoroughly because sometimes dirt and dust can get caught within the screen, preventing the Keurig screen from working properly.

Check the LCD screen if your Keurig screen is not working properly. The reason might be the connection of your LCD screen becoming loose. Here is a step-by-step guide on troubleshooting the Keurig screen.With the help of a screwdriver, remove two screws (140 mm screws) that are located on the lower side of the chamber lid. Also, remove the top black housing of the Keurig coffee maker which surrounds the screen.

Open the snaps that are holding the LCD screen with the brewer with a metal spudger. ( be careful as these snaps are fragile and might be prone to leakage)

Detach the white modular. This is used to connect the LCD screen to the circuit board’s wires. By gently squeezing the sides and pulling them around, you can remove it.

Plug the white modular back properly and see if the screen has started working or not. If yes, That’s Great! If not, then might be the screen is damaged and you have to replace it.

If none of the above steps helps in fixing the issue, you need to contact Keurig customer supportto seek professional help. If you have registered your machine and it is still under warranty, they will assist you in solving this problem free of cost.

Don’t worry if your Keurig 2.0 touchscreen isn’t working; you’re not alone! We’ve guided you through no of the steps to fix the problem in this blog article.

We hope this information helps you in resolving your Keurig 2.0 touchscreen issue. If the screen is still not working then contact Keurig support or seek help from a technician.