gopro hero+ lcd waterproof case price

HERO11 Black & HERO10 Black are rugged and waterproof right out of the box, but this housing handles anything you can throw at it. It protects from dirt and flying debris, and it’s waterproof down to 196ft (60m) for deep-water diving.

GoPro’s Hero action cameras are aimed squarely at the entry-level, leaving the more fully-featured Hero4 for serious film-makers. The Hero is still well-equipped and more than capable of capturing quality footage though. There are now three cameras in the Hero range: the GoPro Hero (around £94), GoPro Hero+ (around £169) and GoPro Hero+ LCD (around £199). The Hero+ gains Wi-Fi for pairing with an iOS and Android companion app, but the Hero+ LCD gets an LCD display too.

This gives you a live view for framing your video and photos, and lets you play back recorded clips, but also functions as a touchscreen. The LCD gives you a quick and easy way to adjust settings, as well as providing in-camera trimming so you can cut down videos to easily sharable sizes.

The camera will feel familiar to GoPro users, with the same typical three-button design. The power button is on the front, the shutter button on the top and a settings button the side. The side button is also used for “HiLight” favourites tagging when recording video, making it simple to mark important parts of your footage to make editing easier. You can also mark HiLights when you’re watching back video on the LCD display.

One of the biggest differences from the Hero4 is the non-removable waterproof case. Before the entry-level Hero arrived, every GoPro had a separate, detachable waterproof housing. With the Hero+ LCD, the casing is permanently fixed in place, which you might find a little unwieldy if you plan on using handheld gimbals designed for caseless action cameras.

The permanent case also increases the overall size, even when you’re not planning any aquatic escapades, but when you do get wet, the Hero+ LCD can survive being submerged to depths of 40m. The case is otherwise very rugged and will stand up to a good few knocks. As a whole, the Hero+ LCD weighs 127g - lighter than the 152g Hero4 Black. You get the usual array of curved and flat adhesive mounts, but the Hero+ range works with all of GoPro’s existing mount range.

Various different backdoors are included for the case, including one that will allow you to still access the touchscreen, but it’s worth noting that the touch backdoor is only waterproof to 10m. A skeleton backdoor can also be used that doesn’t obstruct the microphones as much for improved sound quality, but this isn’t dust or waterproof.

The Hero+ LCD might be more of an entry-level camera, but it’s still well-specified when it comes to video resolutions. It’s capable of up to 1080p video at 60fps, which is excellent for a sub-£200 camera - many are limited to 30fps. Where the Hero+ range is lacking is when it comes to higher frame rate video, which is useful for creating slow motion footage. The similarly-priced Veho Muvi K2NPNG allows for 720p video at 120fps. You’ll have to step up to the Hero4 Black to get 240fps video from a GoPro.

The Hero+ LCD is also capable of capturing 8-megapixel still images, in addition to a burst mode that rattles off 10 frames in 2 seconds. There’s also a time lapse photo mode, with intervals between 0.5s to 60s.

Footage captured from the Hero+ LCD was very crisp, with nice and vibrant colours and decent sharpness when given outdoor lighting. Under low light there’s a reasonable amount of noise, with the auto low-light function adjusting the frame rate dynamically to match lighting conditions. The resulting 8-megapixel still images captured a surprising amount of detail.

Battery life was excellent, matching the Veho Muvi K2 NPNG, which was one of the longest lasting action cameras we’ve tested. Shooting 1080p video at 30fps, the Hero+ LCD managed a fantastic 2 hours 27 minutes - significantly higher than the GoPro Hero4 Black. The battery isn’t removable, however, so there’s no swapping out batteries while you’re in the field.

As an entry-level GoPro, the Hero+ LCD is an excellent choice provided you don’t need the more advanced functionality of the full-blown Hero4. With not much money separating the Hero+ LCD and regular Hero+, the added convenience of a touchscreen display is definitely worth paying extra for.

The Muvi K2 NPNG has more included accessories (and support for GoPro mounts) but the Hero+ LCD has better image quality and a superior companion app. In any case, with both you’re getting very capable action cameras for not a lot of money.

Replacement USB Data & Charging Cable Cord for GoPro Hero+ (CHDHC-101), GoPro Hero+ LCD (CHDHB-101), GoPro Hero4 Session (CHDHB-100) Digital CamerasColor: Black

Compatible: •This USB cable is compatible with the following GoPro Digital Camera Models: GoPro Hero+ (CHDHC-101), GoPro Hero+ LCD (CHDHB-101), GoPro Hero4 Session (CHDHB-100). Please Note: This USB cable IS NOT compatible with the GoPro Hero4 Black or GoPro Hero4 Silver.

Released in June of 2015, the GoPro Hero+ LCD is covered by a grey waterproof casing with the logos under the lens. The GoPro Hero+ has a latch on top of the device that removes the casing, and allows access to the touchscreen. This camera also has a built in mount and three buttons that allow the user to control the camera without opening the casing. The Hero+ LCD edition came with new additions to the GoPro line such as: built in Bluetooth, WiFi, LCD display, and a touchscreen. The Bluetooth allows the user to use one"s phone or tablet as a remote to have full control over the camera"s functions. After capturing the video or photo, WiFi allows the users to upload their work or art to social media. Please be aware that these capabilities can only be used if the GoPro App is downloaded onto a smartphone or tablet.

Today GoPro announced its latest action camera, the GoPro HERO+ LCD.  This marks the first time GoPro has done an ‘off-cycle’ release of a new camera product, as the company has historically released new action cams in the September/October timeframe.  It also bookends a rather busy week of announcements for the company.  Last week they announced both their intentions of launching a drone early next year, as well as their crazy 6-camera spherical mount system.  And that’s all before we talk about an apparent upcoming software update to start cloud sync of GoPro files to some sort of still unannounced internet service.  And don’t forget that even more crazy 16-camera virtual reality mount they built for Google.

The new GoPro HERO+ LCD is sorta exactly as the name implies: It’s the 2014 GoPro HERO…plus…an LCD screen.  Well, and connectivity over WiFi and Bluetooth Smart.

You’ll likely remember that the entry level GoPro HERO was $129US, and had a non-removable external case.  That meant that you couldn’t take it out of the case, which in turn meant you couldn’t add in any additional rear-attaching accessories such as the extra battery packs or LCD screen.

They also added in the WiFi and Bluetooth Smart compatibility.  Not for sensors, but rather for connecting to your mobile phone. This connectivity allows you to transfer photos and videos over to your phone, and then up to the interwebs.  Further, the HERO+ LCD includes the remote highlight tagging, which wasn’t available on the lower end model.  This means you can use the remote control to tag highlights so you can find them quicker later on during editing.

Finally, the camera has an internal editing capability, allowing you to slice the clips a bit better before transferring them.  This helps reduce the time to transfer video clips to your phone, making the process a little bit quicker.  This is planned to come to the HERO4 Silver later this summer, and the HERO4 Black as well (if you have bought the additional LCD back touchscreen).

The Hero+ LCD unit includes a few different back doors, so you can use it in wet environments and still touch the screen, as well as using an open door too.

Definitely an interesting market for sure.  For those curious about my recommendations – for 95% of folks it’ll likely shift from the Hero4 Silver to the HERO+ LCD, assuming there are no issues with it.  The reason being that if you’re using it for cycling and such, you can actually use your Garmin Edge device with the GoPro, inside of Garmin’s free VIRB Edit software suite – thus getting all the benefits of data overlays there (I suppose Garmin is probably happy you’re buying their device).  It’s really only if you’re doing direct to camera sensors and don’t already have a GPS device for speed/distance/pace/altitude that I’d recommend looking at the Garmin X/XE lineup.

Note: You can now order the Hero+ LCD via both Amazon and Clever Training.  While both sites help support the site here and all the work I do, by using Clever Training you’re also going to save 10% on your order with DCR Reader Coupon Code DCR10BTF – further, you’ll get free shipping within the US!

Specially designed for GoPro Hero 9 Black, perfect fit GoPro Hero 9 Black which makes it is easy to operate your camera underwater.Easily install GoPro Hero 9 Black in the protective case, just need to open the case, put GoPro Hero 9 Black in and then close the protective case, your camera will get Comprehensive protection.The protective case is made by durable good quality material, it will protect your GoPro Hero 9 Black from being scratched and damaged, completely protective your camera.The waterproof sealing ring and tight buckle will make sure that you can use your GoPro Hero 9 Black relieved when you are swimming, surfing, diving, snorkeling, drifting or photographing under water, needn’t worry about water seepage.The protective case has HD waterproof lens cover, which will make your GoPro Hero 9 Black screen a clear photograph or video under water.