ntsc pal television tft display 2.5 diagonal to 5v quotation

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Yes, this is an adorable small television! The visible display measures only 2.5" (6.35cm) diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voila, a television display! There"s one little button to adjust the LED backlight brightness up and down. There is no other adjustment available but we found that the color and contrast look great right out of the box.

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any analog composite-video output such as a YBox or Propeller w/Video out. It will not work with a device that only outputs VGA, HDMI or any other digital video signal.

Please note, these miniature displays are very delicate and require care to avoid ripping the delicate flex connector. These are best used by electronics geeks who have experience and are comfortable working with delicate electronic components. WE CANNOT REPLACE DAMAGED DISPLAYS if you are not careful and rip the flex connector!

If you received a display where the connector cable has red & black wires going to the composite plug then connect yellow to ground, and white wire to 6-12V, thanks!

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Yes, this is an adorable small television! The visible display measures only 2.5" (6.35cm) diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-15VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voilà, a television display! There"s one little button to adjust the LED backlight brightness up and down.  There is no other adjustment available but we found that the color and contrast look great right out of the box.

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any analog composite-video output such as a YBox or Propeller w/Video out. It will not work with a device that only outputs VGA, HDMI or any other digital video signal.

Please note, these miniature displays are very delicate and require care to avoid ripping the delicate flex connector. These are best used by electronics geeks who have experience and are comfortable working with delicate electronic components. WE CANNOT REPLACE DAMAGED DISPLAYS if you are not careful and rip the flex connector!

If you received a display where the connector cable has red & black wires going to the composite plug then connect yellow to ground, and white wire to 6-12V, thanks!

Yes, this is an adorable small television! The visible display measures only 2.5" (6.35cm) diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-15VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voila, a television display! There"s one little button to adjust the LED backlight brightness up and down. There is no other adjustment available but we found that the color and contrast look great right out of the box.

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any analog composite-video output such as a YBox or Propeller w/Video out. It will not work with a device that only outputs VGA, HDMI or any other digital video signal.

Please note, these miniature displays are very delicate and require care to avoid ripping the delicate flex connector. These are best used by electronics geeks who have experience and are comfortable working with delicate electronic components. WE CANNOT REPLACE DAMAGED DISPLAYS if you are not careful and rip the flex connector!

If you received a display where the connector cable has red & black wires going to the composite plug then connect yellow to ground, and white wire to 6-12V, thanks!

The visible display measures only 2.5" (6.35cm) diagonal,Raspberry Pi NTSC/PAL (Television) TFT Display - 2.5" Diagonalcomes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-15VDC to the red and black wires, then connect a composite video source to the yellow and black wire. There"s one little button to adjust the LED backlight brightness up and down.

It will work connected to any analog composite-video output. It will not work with a device that only outputs VGA, HDMI or any other digital video signal.

If you received a display where the connector cable has red & black wires going to the composite plug then connect yellow to ground, and white wire to 6-12V

The is a compact full color TFT LCD module, whose driving board is capable of converting composite video signals to the proper interface of LCD panel and is suitable for security, car TV, portable DVD and GPS applications. It can accept NTSC & ARGB video signal input. This device consists of a twisted nematic (TN) liquid crystal cell, that incorporates a TFT-array that has x 234 pixels a 5 inch diagonal screen, X and Y drivers, an LSI controller, and a built-in CCFL backlight and inverter (with optional board.)

Ultra compact DC/DC DC/AC Video decoder all in one VGA Mode input NTSC/PAL System auto switching Up/Down display reverse Left/Right display reverse Single operation voltage +12V Applications: security, video game, door phone, video phone portable TV, GPS, instrument display and office electronics RoHS complaint

Application Precautions: Do not use the products herein for the following equipment which demands extremely high performance in terms of functionality, reliability, or accuracy. (Aerospace equipment, Communications equipment for trunk lines, control equipment for the nuclear power industry, and medical equipment relater to life support, etc. Contact us for other applications that demands high reliability and functionality.

Mechanical Characteristics Item Specification Screen Size Display Format Active Area Dot Pitch Pixel Configuration Outline Dimension Weight Contrast Ratio View Angle Color Brightness 5.0 inch (13 cm) diagonal 234 102.72 (H) x 74.53 (V) 0.107 (W) x 0.319 (H) stripe 119.3 (W) x 91.4 (H) x 7.5 (D) (V) (H) � 55� Full Color 350

Absolute Maximum Rating (GND = 25�C) Item Input Voltage Video Input Signal Digital Input Signal Operating Temperature Relative Humidity Storage Temperature Relative Humidity Symbol Vin Video in TTL Remarks Absolute Maximum Rating Min. Max. V Vp-p V �C %RH �C %RH Unit

Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.

Purdy Electronics Corporation 720 Palomar Avenue Sunnyvale, CA 94085 Tel: 408.523.8200 Fax: 408.733.1287 sales@purdyelectronics.com www.purdyelectronics.com

Electrical Characteristics Item Input Voltage Total Current Power Consumption Video Input Signal Output Voltage Brightness Adjust Contrast Adjust Color Adjust Picture Dimmer Adjust Screen Reverse Screen Reverse Output for LCD Panel Backlight Pin No. 1 2 Lamp Data Symbol HV+ HVI/O O � Function High voltage terminal for backlight Return terminal for backlight Symbol Vin Iin � Video in +5VA Bright Contrast Color � DIM Left / Right Up ? Down I/O Min. Typ. +5V TTL Max. Unit mA W Vp-p

LCD Panel I/O Terminals (FPC 30-pin below contact type): Pin Symbol I/O Function 1 DIO1 I/O Vertical start pulse 2 CPV I Shift clock for gate driver 3 VGL I Power for gate driver (AC voltage) � No connection 5 VEE I Negative powe gate driver (DC voltage) � No connection 7 XOE I Output enable for gate driver 8 VSS I Ground for digital circuit 9 VCC I Supply voltage for logic control circuit for gate driver � No connection 11 VGH I Positive power for gate driver � No connection 13 U/D I Up/Down control for gate driver 14 DIO2 I/O Vertical Start pulse 15 VCOM I Common electrode voltage 16 STH1 I/O Start pulse for source driver VDD1 I Supply power for digital circuit VSS1 � Ground for digital circuit VDD2 I Supply power for analog circuit VSS2 � Ground for analog circuit 21 R/L I Left/Right control for source driver VR I Video input VG I Video input VB I Video input CPH1 I Sampling and shift clock for source driver CPH2 I Samplling and shift clock for source driver CPH3 I Sampling and shift clock for source driver 28 STH2 I/O Start pulse for source driver 29 OEH I Output enable for source driver � No connection Note: About TFT-LCD Panel detail, please refer to Purdy Electronics" AND-TFT-5PA specification.

"----------------------------------------------------------------------------------------------" The value in the B0 register from the readadc command below may need to be

The latest from the Guru of audio. Explains audio concepts in easy-to-understand language with plenty of examples and reasoning. Inspiration for audio

The latest from the Guru of audio. Explains audio concepts in easy-to-understand language with plenty of examples and reasoning. Inspiration for audio

Advertisers are warned that they are responsible for the content of all advertisements and that they must conform to the Trade Practices Act 1974 or as subsequently amended and to any governmental regulations which are

November 2003: PC Board Design, Pt.2; 12AX7 Valve Audio Preamplifier; Our Best Ever LED Torch; Smart Radio Modem For Microcontrollers; PICAXE Pt.9; Programmable PIC-Powered Timer.

September 2001: Making MP3s; Build An MP3 Jukebox, Pt.1; PCControlled Mains Switch; Personal Noise Source For Tinnitus; Directional Microphone; Using Linux To Share An Internet Connection, Pt.4.