lcd monitors definition in stock

These LCD displays are the most common among others, mainly because they are lightweight, produce the best images, and use less power. The display is composed of millions of pixels that form images.

If you are looking for information about LCD Monitors (see HP monitors) then you are at the right place. You will find everything you want to know about LCD Monitor with its definition, description, function, benefits, how to use it, where to buy, and links for reviews and comparisons to make the most out of your investment.

An LCD monitor (Liquid Crystal Display Monitor) is a video display device commonly used in computers and televisions. It is a flat panel display as opposed to the more traditional cathode-ray tube (CRT) for television sets and oscilloscope monitors.

Also, this flat panel display has other advantages over CRT displays that include higher resolution, brighter images, better contrast ratios, deeper black ranges, more color palettes, and most importantly extremely lower power demands. In most cases, LCD monitors are lightweight and thinner than CRT monitors, which makes them perfect as portable monitors, too.

There are various types of LCD monitors on the market, with each having its pros and cons. Some are designed to provide wide viewing angles, while others are made to provide great image quality. If you are looking for an LCD monitor for your Mac Mini, PC, or laptop, here are the main types to choose from;

Twisted Nematic (TN) is one of the most common LCD technologies. It has been the dominant technology for regular home and office displays from 2001 to 2010 until it was replaced by better alternative technologies of In-Plane Switching (IPS), and VA.

Vertical Alignment (VA) panels are a type of LCD display panel that features better contrast ratios and black uniformity when compared to IPS and TN panels.

The additional characteristics of this type of LCD monitor include high image quality, adaptability to bright light conditions, color accuracy, and competitive pricing - all factors which have made them very popular.

At the back of the LCD display, there is a backlight that emits white light. It goes through a horizontal polarizer; this is a kind of filter that allows only horizontal polarized light beams to pass through it.

Most modern LCD monitors have several parts that work together to produce an image. The main parts include;The panel,The cables (power cable and connectivity cables)The stand

LCD Monitor is one of the most important technologies that exist today, especially if you are working on a project. One of the very first LCD monitors was developed in 1970 by inventor J. Fergason (see also who created the first monitor historically).

Before that, cathode ray displays were bulky, consumed a lot of electricity, did not last a long time, and did not produce great images like today’s Acer LCD monitor, Dell LCD monitor, or AOC LCD monitor.

It is not until 1981 when Solartron introduced the first color LCD monitor; his name is always mentioned when one is researching thehistory ofmonitors. Since then, LCD monitors have evolved at an alarming rate. Even now, more innovations are being made to make them more durable and useful for customers.

The inventor of the LCD monitor is inventor J. Fergason. He was a business entrepreneur as well as an American inventor. He was born on January 12, 1934, and died on December 9, 2008.

Tests have proved that Samsung monitors such as Samsung u32j590 31.5 16 9 4k UHD LCD monitor and AOC 27b1h 27 LCD monitor black are much better than the traditional cathode ray and Plasma monitors. Why?

LCD is the best technology for most people, but it does have its downsides. The most obvious one is price. While LCD panels are getting cheaper, they"re still more expensive than CRT displays.

An LCD Monitor gives sharp clear image quality with its high resolution. The high resolution means viewing more pixels on the screen for a superior picture. Combining super-resolution, vivid colors, and extreme brightness, LCD monitors will amaze you. Nonetheless, when looking for your movies monitor, it is essential to go for high-resolution models.

The price of an LCD monitor depends on its size and features. Generally, prices range from roughly $150 to over $2000, although some models may be less expensive or more expensive.

There are various models of LCD monitors on the market. The power consumption of each model depends on the display size, resolution, brightness, etc. The power consumption of a 19-inch LCD monitor averages around 20 watts.

There are various brands that manufacture LCD monitors. Some of the most common brands include:Lenovo such as Lenovo l22e 20 21.5-inch LCD backlit lcd monitorDELL such as dell 2407wfp 24-inch widescreen ultrasharp lcd monitorSamsung such as Samsung 32 curved 1920x1080 HDMI 60hz 4ms fhd lcd monitorAcerHPLG such as LG 34 ips lcd ultrawide fhd freesync monitor blackSanyoSony

Huge number of professionals enjoy numerous benefits of LCD technology. No matter what you do, whether you use your computer monitor for editing videos, graphic design, programming, or if you are someone who plays computer games frequently, you will need the best LCD because of its great features.

LED monitors (a form of LCD) are your best choice as monitors for graphic design. They are a bit pricier than VA panels but the difference in performance is worth it. You get a faster response time and better color rendition while keeping everything within a budget.

If you are a photographer, working with monitors for photo editing is as important as the camera you work with. The key feature you should look for is backlight. LED"s (a form of LCD) will have brighter, sharper blacks than that of an regular LCD, making them ideal for the digital photo editor. The fact is also that you won"t have to spend a fortune as there are many affordable options.

When looking for a monitor for architects one should focus on color, brightness, and contrast. Optimal color performance and resolution is what most monitors for architecture are equiped with. We should also point out that best monitors for CAD and similar demanding software share similar features and technology.

In this category LCD monitor represents an excellent choice. You can have all features of a business-style monitor with full customibility according to what your work requires. We must point out that you should look at monitors for programming that provide vibrant colors and excellent viewing angles usually found in a 4k monitor - see Ultrawide Vs. 4K here - which may not be within your budget. If you must compromise than go for these budget monitors we reviewed.

I have made it simple for you to pick the best computer LCD monitors currently by listing them in this section. I have evaluated each monitor based on its price, display technology, panel type, size, inputs, speakers, ergonomics, and video performance.

If you want to buy an LCD monitor, there are several key factors to consider. They include screen size, screen resolution, response time, brightness, and refresh rate.

When buying an LCD monitor, one of the most important parameters to consider is screen resolution (the number of pixels). The higher the resolution, like in these 40 inch 4K monitors, the more you will see your documents (see here which monitors are our top choice for reading), spreadsheets, or photos on your screen. You"ll also enjoy sharper images and smoother lines.

The refresh rate of a small LCD monitor, curved LCD monitor, or a touch screen LCD monitor is very important, especially when playing video games. The refresh rate is measured in Hertz or Hz. It refers to the number of times the picture on the screen is refreshed per second. With 60Hz there could be plenty of ghosting, but with 120hz monitors, or, even better, 144Hz monitors, the difference will be obvious.

The higher the refresh rate, the more fluid video content will appear on your screen. A refresh‌ ‌rate ‌is crucial‌ ‌when‌ ‌you‌ ‌are‌ ‌playing‌ ‌games, so the safest bet is to go for a 240Hz monitor. Also, you will give your games an immersive feel with one of the ultra-wide computer monitors.

Screen size is also an important thing to consider when you"re in the market for a new LCD monitor. The most common sizes used for monitors are 14, 17,21, 27,32 and 42 inches. Anything less than a 24 inch monitor would be considered a small LCD monitor.

These are the required steps to install an LCD monitor. Your new monitor can come with all the necessary accessories you"ll need, including cables and screws.

The first step to installing any LCD monitor is to unbox the product. Feel free to take your time as you unpack and familiarize yourself with the product. Look at all of the contents and verify that everything is accounted for.

The second step to installing an LCD monitor is gathering the tools required for the job such as a screwdriver, gloves, and screws and the cables needed.

Most monitors come with an instruction manual that can be read to better understand how to install the LCD screen. The user manual details the screen resolution, cable connection placement, and how to mount the monitor to its stand.

To connect an LCD monitor to a computer using a cable, insert one end of the cable into the appropriate port at the rear or the side of the computer. Connect the other end to the display.

To clean the LCD monitor of your computer, find some monitor wipes. These are available at most office supply stores and are perfect for cleaning monitor screens.

Yes, LCD monitors are suitable for gaming. High resolution, high refresh rates, and low response times are some of the features that make LCD monitors suitable for both professional gamers and amateur gamers.

The combination of high refresh rates and low response times enables gamers to react quickly and enjoy a smooth visual performance. Features like in G-sync monitors help eliminate motion blur and other issues that can reduce your performance.

Yes, LCD monitors are suitable for business. Business owners with limited space, or workers traveling on business, now can take their lightweight computer monitor with them. Moreover, since convenience is your number one goal in that case, it helps to have monitors with speakers built into them already!

The best work monitorsare superbly suited for the display of data, tables with rows and columns of numbers, figures, or other information. The performance is consistent and they help save energy as they are energy efficient. And for best productivity, if you are able to pull it off, using multiple monitors for which the bezel less monitors are best suited, is the right way to go.

It is also important that the monitor has some type of heat sink; the way it dissipates heat away from the circuitry. The most common heat sink is a base plate or duct that channels air through the back of the monitor. This helps prevent discoloration on the screen that can happen with some LCD monitors when they are left in a car continuously.

LCD monitors use cold cathode fluorescent lamps (CCFLs) to illuminate the display while LED monitors use diode-based lights. Also, in terms of eye strain, visuals, and energy consumption, LEDs outperform LCDs.

IPS is a technology used in LCD screens. IPS monitors are preferred by professionals for their true-to-life color representation, wide viewing angles, and superior-high-quality image clarity.

They are the ultimate solution for professional photo editing, graphic designing, and video editing. Generally, LCD monitors are the most affordable and popular display options available today (see monitors under 200 dolars). These monitors are ideal for both office and home use, whether you want to game or watch movies. As for games exclusively, curved gaming monitors, which are mostly IPS, are especially comfortable for your eyes and they are probably the ones to turn to (see also top curved monitors overall)

Apart from LCD monitors, other types of computer monitors are;The first is the CRT or cathode ray tube monitor.Another type of monitor is an OLED Monitor. It is brighter, thinner, and with better color contrast than most other monitors.Plasma monitorsTouch Screen monitor

A liquid crystal display (LCD) monitor is a computer monitor or display that uses LCD technology to show clear images, and is found mostly in laptop computers and flat panel monitors. This technology has replaced the traditional cathode ray tube (CRT) monitors, which were the previous standard and once were considered to have better picture quality than early LCD variants. With the introduction of better LCD technology and its continuous improvement, LCD is now the clear leader over CRT, in terms of color and picture quality, not to mention capabilities for large resolutions. Also, LCD monitors may be made much more cheaply than CRT monitors.

Glass substrate with ITO electrodes. The shapes of these electrodes will determine the shapes that will appear when the LCD is switched ON. Vertical ridges etched on the surface are smooth.

A liquid-crystal display (LCD) is a flat-panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals combined with polarizers. Liquid crystals do not emit light directlybacklight or reflector to produce images in color or monochrome.seven-segment displays, as in a digital clock, are all good examples of devices with these displays. They use the same basic technology, except that arbitrary images are made from a matrix of small pixels, while other displays have larger elements. LCDs can either be normally on (positive) or off (negative), depending on the polarizer arrangement. For example, a character positive LCD with a backlight will have black lettering on a background that is the color of the backlight, and a character negative LCD will have a black background with the letters being of the same color as the backlight. Optical filters are added to white on blue LCDs to give them their characteristic appearance.

LCDs are used in a wide range of applications, including LCD televisions, computer monitors, instrument panels, aircraft cockpit displays, and indoor and outdoor signage. Small LCD screens are common in LCD projectors and portable consumer devices such as digital cameras, watches, digital clocks, calculators, and mobile telephones, including smartphones. LCD screens are also used on consumer electronics products such as DVD players, video game devices and clocks. LCD screens have replaced heavy, bulky cathode-ray tube (CRT) displays in nearly all applications. LCD screens are available in a wider range of screen sizes than CRT and plasma displays, with LCD screens available in sizes ranging from tiny digital watches to very large television receivers. LCDs are slowly being replaced by OLEDs, which can be easily made into different shapes, and have a lower response time, wider color gamut, virtually infinite color contrast and viewing angles, lower weight for a given display size and a slimmer profile (because OLEDs use a single glass or plastic panel whereas LCDs use two glass panels; the thickness of the panels increases with size but the increase is more noticeable on LCDs) and potentially lower power consumption (as the display is only "on" where needed and there is no backlight). OLEDs, however, are more expensive for a given display size due to the very expensive electroluminescent materials or phosphors that they use. Also due to the use of phosphors, OLEDs suffer from screen burn-in and there is currently no way to recycle OLED displays, whereas LCD panels can be recycled, although the technology required to recycle LCDs is not yet widespread. Attempts to maintain the competitiveness of LCDs are quantum dot displays, marketed as SUHD, QLED or Triluminos, which are displays with blue LED backlighting and a Quantum-dot enhancement film (QDEF) that converts part of the blue light into red and green, offering similar performance to an OLED display at a lower price, but the quantum dot layer that gives these displays their characteristics can not yet be recycled.

Since LCD screens do not use phosphors, they rarely suffer image burn-in when a static image is displayed on a screen for a long time, e.g., the table frame for an airline flight schedule on an indoor sign. LCDs are, however, susceptible to image persistence.battery-powered electronic equipment more efficiently than a CRT can be. By 2008, annual sales of televisions with LCD screens exceeded sales of CRT units worldwide, and the CRT became obsolete for most purposes.

Each pixel of an LCD typically consists of a layer of molecules aligned between two transparent electrodes, often made of Indium-Tin oxide (ITO) and two polarizing filters (parallel and perpendicular polarizers), the axes of transmission of which are (in most of the cases) perpendicular to each other. Without the liquid crystal between the polarizing filters, light passing through the first filter would be blocked by the second (crossed) polarizer. Before an electric field is applied, the orientation of the liquid-crystal molecules is determined by the alignment at the surfaces of electrodes. In a twisted nematic (TN) device, the surface alignment directions at the two electrodes are perpendicular to each other, and so the molecules arrange themselves in a helical structure, or twist. This induces the rotation of the polarization of the incident light, and the device appears gray. If the applied voltage is large enough, the liquid crystal molecules in the center of the layer are almost completely untwisted and the polarization of the incident light is not rotated as it passes through the liquid crystal layer. This light will then be mainly polarized perpendicular to the second filter, and thus be blocked and the pixel will appear black. By controlling the voltage applied across the liquid crystal layer in each pixel, light can be allowed to pass through in varying amounts thus constituting different levels of gray.

The chemical formula of the liquid crystals used in LCDs may vary. Formulas may be patented.Sharp Corporation. The patent that covered that specific mixture expired.

Most color LCD systems use the same technique, with color filters used to generate red, green, and blue subpixels. The LCD color filters are made with a photolithography process on large glass sheets that are later glued with other glass sheets containing a TFT array, spacers and liquid crystal, creating several color LCDs that are then cut from one another and laminated with polarizer sheets. Red, green, blue and black photoresists (resists) are used. All resists contain a finely ground powdered pigment, with particles being just 40 nanometers across. The black resist is the first to be applied; this will create a black grid (known in the industry as a black matrix) that will separate red, green and blue subpixels from one another, increasing contrast ratios and preventing light from leaking from one subpixel onto other surrounding subpixels.Super-twisted nematic LCD, where the variable twist between tighter-spaced plates causes a varying double refraction birefringence, thus changing the hue.

LCD in a Texas Instruments calculator with top polarizer removed from device and placed on top, such that the top and bottom polarizers are perpendicular. As a result, the colors are inverted.

The optical effect of a TN device in the voltage-on state is far less dependent on variations in the device thickness than that in the voltage-off state. Because of this, TN displays with low information content and no backlighting are usually operated between crossed polarizers such that they appear bright with no voltage (the eye is much more sensitive to variations in the dark state than the bright state). As most of 2010-era LCDs are used in television sets, monitors and smartphones, they have high-resolution matrix arrays of pixels to display arbitrary images using backlighting with a dark background. When no image is displayed, different arrangements are used. For this purpose, TN LCDs are operated between parallel polarizers, whereas IPS LCDs feature crossed polarizers. In many applications IPS LCDs have replaced TN LCDs, particularly in smartphones. Both the liquid crystal material and the alignment layer material contain ionic compounds. If an electric field of one particular polarity is applied for a long period of time, this ionic material is attracted to the surfaces and degrades the device performance. This is avoided either by applying an alternating current or by reversing the polarity of the electric field as the device is addressed (the response of the liquid crystal layer is identical, regardless of the polarity of the applied field).

Displays for a small number of individual digits or fixed symbols (as in digital watches and pocket calculators) can be implemented with independent electrodes for each segment.alphanumeric or variable graphics displays are usually implemented with pixels arranged as a matrix consisting of electrically connected rows on one side of the LC layer and columns on the other side, which makes it possible to address each pixel at the intersections. The general method of matrix addressing consists of sequentially addressing one side of the matrix, for example by selecting the rows one-by-one and applying the picture information on the other side at the columns row-by-row. For details on the various matrix addressing schemes see passive-matrix and active-matrix addressed LCDs.

LCDs, along with OLED displays, are manufactured in cleanrooms borrowing techniques from semiconductor manufacturing and using large sheets of glass whose size has increased over time. Several displays are manufactured at the same time, and then cut from the sheet of glass, also known as the mother glass or LCD glass substrate. The increase in size allows more displays or larger displays to be made, just like with increasing wafer sizes in semiconductor manufacturing. The glass sizes are as follows:

Until Gen 8, manufacturers would not agree on a single mother glass size and as a result, different manufacturers would use slightly different glass sizes for the same generation. Some manufacturers have adopted Gen 8.6 mother glass sheets which are only slightly larger than Gen 8.5, allowing for more 50 and 58 inch LCDs to be made per mother glass, specially 58 inch LCDs, in which case 6 can be produced on a Gen 8.6 mother glass vs only 3 on a Gen 8.5 mother glass, significantly reducing waste.AGC Inc., Corning Inc., and Nippon Electric Glass.

In 1922, Georges Friedel described the structure and properties of liquid crystals and classified them in three types (nematics, smectics and cholesterics). In 1927, Vsevolod Frederiks devised the electrically switched light valve, called the Fréedericksz transition, the essential effect of all LCD technology. In 1936, the Marconi Wireless Telegraph company patented the first practical application of the technology, "The Liquid Crystal Light Valve". In 1962, the first major English language publication Molecular Structure and Properties of Liquid Crystals was published by Dr. George W. Gray.RCA found that liquid crystals had some interesting electro-optic characteristics and he realized an electro-optical effect by generating stripe-patterns in a thin layer of liquid crystal material by the application of a voltage. This effect is based on an electro-hydrodynamic instability forming what are now called "Williams domains" inside the liquid crystal.

In the late 1960s, pioneering work on liquid crystals was undertaken by the UK"s Royal Radar Establishment at Malvern, England. The team at RRE supported ongoing work by George William Gray and his team at the University of Hull who ultimately discovered the cyanobiphenyl liquid crystals, which had correct stability and temperature properties for application in LCDs.

The idea of a TFT-based liquid-crystal display (LCD) was conceived by Bernard Lechner of RCA Laboratories in 1968.dynamic scattering mode (DSM) LCD that used standard discrete MOSFETs.

On December 4, 1970, the twisted nematic field effect (TN) in liquid crystals was filed for patent by Hoffmann-LaRoche in Switzerland, (Swiss patent No. 532 261) with Wolfgang Helfrich and Martin Schadt (then working for the Central Research Laboratories) listed as inventors.Brown, Boveri & Cie, its joint venture partner at that time, which produced TN displays for wristwatches and other applications during the 1970s for the international markets including the Japanese electronics industry, which soon produced the first digital quartz wristwatches with TN-LCDs and numerous other products. James Fergason, while working with Sardari Arora and Alfred Saupe at Kent State University Liquid Crystal Institute, filed an identical patent in the United States on April 22, 1971.ILIXCO (now LXD Incorporated), produced LCDs based on the TN-effect, which soon superseded the poor-quality DSM types due to improvements of lower operating voltages and lower power consumption. Tetsuro Hama and Izuhiko Nishimura of Seiko received a US patent dated February 1971, for an electronic wristwatch incorporating a TN-LCD.

In 1972, the concept of the active-matrix thin-film transistor (TFT) liquid-crystal display panel was prototyped in the United States by T. Peter Brody"s team at Westinghouse, in Pittsburgh, Pennsylvania.Westinghouse Research Laboratories demonstrated the first thin-film-transistor liquid-crystal display (TFT LCD).high-resolution and high-quality electronic visual display devices use TFT-based active matrix displays.active-matrix liquid-crystal display (AM LCD) in 1974, and then Brody coined the term "active matrix" in 1975.

In 1972 North American Rockwell Microelectronics Corp introduced the use of DSM LCDs for calculators for marketing by Lloyds Electronics Inc, though these required an internal light source for illumination.Sharp Corporation followed with DSM LCDs for pocket-sized calculators in 1973Seiko and its first 6-digit TN-LCD quartz wristwatch, and Casio"s "Casiotron". Color LCDs based on Guest-Host interaction were invented by a team at RCA in 1968.TFT LCDs similar to the prototypes developed by a Westinghouse team in 1972 were patented in 1976 by a team at Sharp consisting of Fumiaki Funada, Masataka Matsuura, and Tomio Wada,

In 1983, researchers at Brown, Boveri & Cie (BBC) Research Center, Switzerland, invented the passive matrix-addressed LCDs. H. Amstutz et al. were listed as inventors in the corresponding patent applications filed in Switzerland on July 7, 1983, and October 28, 1983. Patents were granted in Switzerland CH 665491, Europe EP 0131216,

The first color LCD televisions were developed as handheld televisions in Japan. In 1980, Hattori Seiko"s R&D group began development on color LCD pocket televisions.Seiko Epson released the first LCD television, the Epson TV Watch, a wristwatch equipped with a small active-matrix LCD television.dot matrix TN-LCD in 1983.Citizen Watch,TFT LCD.computer monitors and LCD televisions.3LCD projection technology in the 1980s, and licensed it for use in projectors in 1988.compact, full-color LCD projector.

In 1990, under different titles, inventors conceived electro optical effects as alternatives to twisted nematic field effect LCDs (TN- and STN- LCDs). One approach was to use interdigital electrodes on one glass substrate only to produce an electric field essentially parallel to the glass substrates.Germany by Guenter Baur et al. and patented in various countries.Hitachi work out various practical details of the IPS technology to interconnect the thin-film transistor array as a matrix and to avoid undesirable stray fields in between pixels.

Hitachi also improved the viewing angle dependence further by optimizing the shape of the electrodes (Super IPS). NEC and Hitachi become early manufacturers of active-matrix addressed LCDs based on the IPS technology. This is a milestone for implementing large-screen LCDs having acceptable visual performance for flat-panel computer monitors and television screens. In 1996, Samsung developed the optical patterning technique that enables multi-domain LCD. Multi-domain and In Plane Switching subsequently remain the dominant LCD designs through 2006.South Korea and Taiwan,

In 2007 the image quality of LCD televisions surpassed the image quality of cathode-ray-tube-based (CRT) TVs.LCD TVs were projected to account 50% of the 200 million TVs to be shipped globally in 2006, according to Displaybank.Toshiba announced 2560 × 1600 pixels on a 6.1-inch (155 mm) LCD panel, suitable for use in a tablet computer,transparent and flexible, but they cannot emit light without a backlight like OLED and microLED, which are other technologies that can also be made flexible and transparent.

In 2016, Panasonic developed IPS LCDs with a contrast ratio of 1,000,000:1, rivaling OLEDs. This technology was later put into mass production as dual layer, dual panel or LMCL (Light Modulating Cell Layer) LCDs. The technology uses 2 liquid crystal layers instead of one, and may be used along with a mini-LED backlight and quantum dot sheets.

Since LCDs produce no light of their own, they require external light to produce a visible image.backlight. Active-matrix LCDs are almost always backlit.Transflective LCDs combine the features of a backlit transmissive display and a reflective display.

CCFL: The LCD panel is lit either by two cold cathode fluorescent lamps placed at opposite edges of the display or an array of parallel CCFLs behind larger displays. A diffuser (made of PMMA acrylic plastic, also known as a wave or light guide/guiding plateinverter to convert whatever DC voltage the device uses (usually 5 or 12 V) to ≈1000 V needed to light a CCFL.

EL-WLED: The LCD panel is lit by a row of white LEDs placed at one or more edges of the screen. A light diffuser (light guide plate, LGP) is then used to spread the light evenly across the whole display, similarly to edge-lit CCFL LCD backlights. The diffuser is made out of either PMMA plastic or special glass, PMMA is used in most cases because it is rugged, while special glass is used when the thickness of the LCD is of primary concern, because it doesn"t expand as much when heated or exposed to moisture, which allows LCDs to be just 5mm thick. Quantum dots may be placed on top of the diffuser as a quantum dot enhancement film (QDEF, in which case they need a layer to be protected from heat and humidity) or on the color filter of the LCD, replacing the resists that are normally used.

WLED array: The LCD panel is lit by a full array of white LEDs placed behind a diffuser behind the panel. LCDs that use this implementation will usually have the ability to dim or completely turn off the LEDs in the dark areas of the image being displayed, effectively increasing the contrast ratio of the display. The precision with which this can be done will depend on the number of dimming zones of the display. The more dimming zones, the more precise the dimming, with less obvious blooming artifacts which are visible as dark grey patches surrounded by the unlit areas of the LCD. As of 2012, this design gets most of its use from upscale, larger-screen LCD televisions.

RGB-LED array: Similar to the WLED array, except the panel is lit by a full array of RGB LEDs. While displays lit with white LEDs usually have a poorer color gamut than CCFL lit displays, panels lit with RGB LEDs have very wide color gamuts. This implementation is most popular on professional graphics editing LCDs. As of 2012, LCDs in this category usually cost more than $1000. As of 2016 the cost of this category has drastically reduced and such LCD televisions obtained same price levels as the former 28" (71 cm) CRT based categories.

Monochrome LEDs: such as red, green, yellow or blue LEDs are used in the small passive monochrome LCDs typically used in clocks, watches and small appliances.

Today, most LCD screens are being designed with an LED backlight instead of the traditional CCFL backlight, while that backlight is dynamically controlled with the video information (dynamic backlight control). The combination with the dynamic backlight control, invented by Philips researchers Douglas Stanton, Martinus Stroomer and Adrianus de Vaan, simultaneously increases the dynamic range of the display system (also marketed as HDR, high dynamic range television or FLAD, full-area local area dimming).

The LCD backlight systems are made highly efficient by applying optical films such as prismatic structure (prism sheet) to gain the light into the desired viewer directions and reflective polarizing films that recycle the polarized light that was formerly absorbed by the first polarizer of the LCD (invented by Philips researchers Adrianus de Vaan and Paulus Schaareman),

Due to the LCD layer that generates the desired high resolution images at flashing video speeds using very low power electronics in combination with LED based backlight technologies, LCD technology has become the dominant display technology for products such as televisions, desktop monitors, notebooks, tablets, smartphones and mobile phones. Although competing OLED technology is pushed to the market, such OLED displays do not feature the HDR capabilities like LCDs in combination with 2D LED backlight technologies have, reason why the annual market of such LCD-based products is still growing faster (in volume) than OLED-based products while the efficiency of LCDs (and products like portable computers, mobile phones and televisions) may even be further improved by preventing the light to be absorbed in the colour filters of the LCD.

A pink elastomeric connector mating an LCD panel to circuit board traces, shown next to a centimeter-scale ruler. The conductive and insulating layers in the black stripe are very small.

A standard television receiver screen, a modern LCD panel, has over six million pixels, and they are all individually powered by a wire network embedded in the screen. The fine wires, or pathways, form a grid with vertical wires across the whole screen on one side of the screen and horizontal wires across the whole screen on the other side of the screen. To this grid each pixel has a positive connection on one side and a negative connection on the other side. So the total amount of wires needed for a 1080p display is 3 x 1920 going vertically and 1080 going horizontally for a total of 6840 wires horizontally and vertically. That"s three for red, green and blue and 1920 columns of pixels for each color for a total of 5760 wires going vertically and 1080 rows of wires going horizontally. For a panel that is 28.8 inches (73 centimeters) wide, that means a wire density of 200 wires per inch along the horizontal edge.

The LCD panel is powered by LCD drivers that are carefully matched up with the edge of the LCD panel at the factory level. The drivers may be installed using several methods, the most common of which are COG (Chip-On-Glass) and TAB (Tape-automated bonding) These same principles apply also for smartphone screens that are much smaller than TV screens.anisotropic conductive film or, for lower densities, elastomeric connectors.

Monochrome and later color passive-matrix LCDs were standard in most early laptops (although a few used plasma displaysGame Boyactive-matrix became standard on all laptops. The commercially unsuccessful Macintosh Portable (released in 1989) was one of the first to use an active-matrix display (though still monochrome). Passive-matrix LCDs are still used in the 2010s for applications less demanding than laptop computers and TVs, such as inexpensive calculators. In particular, these are used on portable devices where less information content needs to be displayed, lowest power consumption (no backlight) and low cost are desired or readability in direct sunlight is needed.

STN LCDs have to be continuously refreshed by alternating pulsed voltages of one polarity during one frame and pulses of opposite polarity during the next frame. Individual pixels are addressed by the corresponding row and column circuits. This type of display is called response times and poor contrast are typical of passive-matrix addressed LCDs with too many pixels and driven according to the "Alt & Pleshko" drive scheme. Welzen and de Vaan also invented a non RMS drive scheme enabling to drive STN displays with video rates and enabling to show smooth moving video images on an STN display.

Bistable LCDs do not require continuous refreshing. Rewriting is only required for picture information changes. In 1984 HA van Sprang and AJSM de Vaan invented an STN type display that could be operated in a bistable mode, enabling extremely high resolution images up to 4000 lines or more using only low voltages.

High-resolution color displays, such as modern LCD computer monitors and televisions, use an active-matrix structure. A matrix of thin-film transistors (TFTs) is added to the electrodes in contact with the LC layer. Each pixel has its own dedicated transistor, allowing each column line to access one pixel. When a row line is selected, all of the column lines are connected to a row of pixels and voltages corresponding to the picture information are driven onto all of the column lines. The row line is then deactivated and the next row line is selected. All of the row lines are selected in sequence during a refresh operation. Active-matrix addressed displays look brighter and sharper than passive-matrix addressed displays of the same size, and generally have quicker response times, producing much better images. Sharp produces bistable reflective LCDs with a 1-bit SRAM cell per pixel that only requires small amounts of power to maintain an image.

Segment LCDs can also have color by using Field Sequential Color (FSC LCD). This kind of displays have a high speed passive segment LCD panel with an RGB backlight. The backlight quickly changes color, making it appear white to the naked eye. The LCD panel is synchronized with the backlight. For example, to make a segment appear red, the segment is only turned ON when the backlight is red, and to make a segment appear magenta, the segment is turned ON when the backlight is blue, and it continues to be ON while the backlight becomes red, and it turns OFF when the backlight becomes green. To make a segment appear black, the segment is always turned ON. An FSC LCD divides a color image into 3 images (one Red, one Green and one Blue) and it displays them in order. Due to persistence of vision, the 3 monochromatic images appear as one color image. An FSC LCD needs an LCD panel with a refresh rate of 180 Hz, and the response time is reduced to just 5 milliseconds when compared with normal STN LCD panels which have a response time of 16 milliseconds.

Samsung introduced UFB (Ultra Fine & Bright) displays back in 2002, utilized the super-birefringent effect. It has the luminance, color gamut, and most of the contrast of a TFT-LCD, but only consumes as much power as an STN display, according to Samsung. It was being used in a variety of Samsung cellular-telephone models produced until late 2006, when Samsung stopped producing UFB displays. UFB displays were also used in certain models of LG mobile phones.

In-plane switching is an LCD technology that aligns the liquid crystals in a plane parallel to the glass substrates. In this method, the electrical field is applied through opposite electrodes on the same glass substrate, so that the liquid crystals can be reoriented (switched) essentially in the same plane, although fringe fields inhibit a homogeneous reorientation. This requires two transistors for each pixel instead of the single transistor needed for a standard thin-film transistor (TFT) display. The IPS technology is used in everything from televisions, computer monitors, and even wearable devices, especially almost all LCD smartphone panels are IPS/FFS mode. IPS displays belong to the LCD panel family screen types. The other two types are VA and TN. Before LG Enhanced IPS was introduced in 2001 by Hitachi as 17" monitor in Market, the additional transistors resulted in blocking more transmission area, thus requiring a brighter backlight and consuming more power, making this type of display less desirable for notebook computers. Panasonic Himeji G8.5 was using an enhanced version of IPS, also LGD in Korea, then currently the world biggest LCD panel manufacture BOE in China is also IPS/FFS mode TV panel.

In 2011, LG claimed the smartphone LG Optimus Black (IPS LCD (LCD NOVA)) has the brightness up to 700 nits, while the competitor has only IPS LCD with 518 nits and double an active-matrix OLED (AMOLED) display with 305 nits. LG also claimed the NOVA display to be 50 percent more efficient than regular LCDs and to consume only 50 percent of the power of AMOLED displays when producing white on screen.

This pixel-layout is found in S-IPS LCDs. A chevron shape is used to widen the viewing cone (range of viewing directions with good contrast and low color shift).

Vertical-alignment displays are a form of LCDs in which the liquid crystals naturally align vertically to the glass substrates. When no voltage is applied, the liquid crystals remain perpendicular to the substrate, creating a black display between crossed polarizers. When voltage is applied, the liquid crystals shift to a tilted position, allowing light to pass through and create a gray-scale display depending on the amount of tilt generated by the electric field. It has a deeper-black background, a higher contrast ratio, a wider viewing angle, and better image quality at extreme temperatures than traditional twisted-nematic displays.

Blue phase mode LCDs have been shown as engineering samples early in 2008, but they are not in mass-production. The physics of blue phase mode LCDs suggest that very short switching times (≈1 ms) can be achieved, so time sequential color control can possibly be realized and expensive color filters would be obsolete.

Some LCD panels have defective transistors, causing permanently lit or unlit pixels which are commonly referred to as stuck pixels or dead pixels respectively. Unlike integrated circuits (ICs), LCD panels with a few defective transistors are usually still usable. Manufacturers" policies for the acceptable number of defective pixels vary greatly. At one point, Samsung held a zero-tolerance policy for LCD monitors sold in Korea.ISO 13406-2 standard.

Dead pixel policies are often hotly debated between manufacturers and customers. To regulate the acceptability of defects and to protect the end user, ISO released the ISO 13406-2 standard,ISO 9241, specifically ISO-9241-302, 303, 305, 307:2008 pixel defects. However, not every LCD manufacturer conforms to the ISO standard and the ISO standard is quite often interpreted in different ways. LCD panels are more likely to have defects than most ICs due to their larger size. For example, a 300 mm SVGA LCD has 8 defects and a 150 mm wafer has only 3 defects. However, 134 of the 137 dies on the wafer will be acceptable, whereas rejection of the whole LCD panel would be a 0% yield. In recent years, quality control has been improved. An SVGA LCD panel with 4 defective pixels is usually considered defective and customers can request an exchange for a new one.

Some manufacturers, notably in South Korea where some of the largest LCD panel manufacturers, such as LG, are located, now have a zero-defective-pixel guarantee, which is an extra screening process which can then determine "A"- and "B"-grade panels.clouding (or less commonly mura), which describes the uneven patches of changes in luminance. It is most visible in dark or black areas of displayed scenes.

The zenithal bistable device (ZBD), developed by Qinetiq (formerly DERA), can retain an image without power. The crystals may exist in one of two stable orientations ("black" and "white") and power is only required to change the image. ZBD Displays is a spin-off company from QinetiQ who manufactured both grayscale and color ZBD devices. Kent Displays has also developed a "no-power" display that uses polymer stabilized cholesteric liquid crystal (ChLCD). In 2009 Kent demonstrated the use of a ChLCD to cover the entire surface of a mobile phone, allowing it to change colors, and keep that color even when power is removed.

In 2004, researchers at the University of Oxford demonstrated two new types of zero-power bistable LCDs based on Zenithal bistable techniques.e.g., BiNem technology, are based mainly on the surface properties and need specific weak anchoring materials.

Resolution The resolution of an LCD is expressed by the number of columns and rows of pixels (e.g., 1024×768). Each pixel is usually composed 3 sub-pixels, a red, a green, and a blue one. This had been one of the few features of LCD performance that remained uniform among different designs. However, there are newer designs that share sub-pixels among pixels and add Quattron which attempt to efficiently increase the perceived resolution of a display without increasing the actual resolution, to mixed results.

Spatial performance: For a computer monitor or some other display that is being viewed from a very close distance, resolution is often expressed in terms of dot pitch or pixels per inch, which is consistent with the printing industry. Display density varies per application, with televisions generally having a low density for long-distance viewing and portable devices having a high density for close-range detail. The Viewing Angle of an LCD may be important depending on the display and its usage, the limitations of certain display technologies mean the display only displays accurately at certain angles.

Temporal performance: the temporal resolution of an LCD is how well it can display changing images, or the accuracy and the number of times per second the display draws the data it is being given. LCD pixels do not flash on/off between frames, so LCD monitors exhibit no refresh-induced flicker no matter how low the refresh rate.

Brightness and contrast ratio: Contrast ratio is the ratio of the brightness of a full-on pixel to a full-off pixel. The LCD itself is only a light valve and does not generate light; the light comes from a backlight that is either fluorescent or a set of LEDs. Brightness is usually stated as the maximum light output of the LCD, which can vary greatly based on the transparency of the LCD and the brightness of the backlight. Brighter backlight allows stronger contrast and higher dynamic range (HDR displays are graded in peak luminance), but there is always a trade-off between brightness and power consumption.

Usually no refresh-rate flicker, because the LCD pixels hold their state between refreshes (which are usually done at 200 Hz or faster, regardless of the input refresh rate).

No theoretical resolution limit. When multiple LCD panels are used together to create a single canvas, each additional panel increases the total resolution of the display, which is commonly called stacked resolution.

As an inherently digital device, the LCD can natively display digital data from a DVI or HDMI connection without requiring conversion to analog. Some LCD panels have native fiber optic inputs in addition to DVI and HDMI.

Limited viewing angle in some older or cheaper monitors, causing color, saturation, contrast and brightness to vary with user position, even within the intended viewing angle.

Uneven backlighting in some monitors (more common in IPS-types and older TNs), causing brightness distortion, especially toward the edges ("backlight bleed").

As of 2012, most implementations of LCD backlighting use pulse-width modulation (PWM) to dim the display,CRT monitor at 85 Hz refresh rate would (this is because the entire screen is strobing on and off rather than a CRT"s phosphor sustained dot which continually scans across the display, leaving some part of the display always lit), causing severe eye-strain for some people.LED-backlit monitors, because the LEDs switch on and off faster than a CCFL lamp.

Fixed bit depth (also called color depth). Many cheaper LCDs are only able to display 262144 (218) colors. 8-bit S-IPS panels can display 16 million (224) colors and have significantly better black level, but are expensive and have slower response time.

Input lag, because the LCD"s A/D converter waits for each frame to be completely been output before drawing it to the LCD panel. Many LCD monitors do post-processing before displaying the image in an attempt to compensate for poor color fidelity, which adds an additional lag. Further, a video scaler must be used when displaying non-native resolutions, which adds yet more time lag. Scaling and post processing are usually done in a single chip on modern monitors, but each function that chip performs adds some delay. Some displays have a video gaming mode which disables all or most processing to reduce perceivable input lag.

Loss of brightness and much slower response times in low temperature environments. In sub-zero environments, LCD screens may cease to function without the use of supplemental heating.

The production of LCD screens uses nitrogen trifluoride (NF3) as an etching fluid during the production of the thin-film components. NF3 is a potent greenhouse gas, and its relatively long half-life may make it a potentially harmful contributor to global warming. A report in Geophysical Research Letters suggested that its effects were theoretically much greater than better-known sources of greenhouse gasses like carbon dioxide. As NF3 was not in widespread use at the time, it was not made part of the Kyoto Protocols and has been deemed "the missing greenhouse gas".

Kawamoto, H. (2012). "The Inventors of TFT Active-Matrix LCD Receive the 2011 IEEE Nishizawa Medal". Journal of Display Technology. 8 (1): 3–4. Bibcode:2012JDisT...8....3K. doi:10.1109/JDT.2011.2177740. ISSN 1551-319X.

Explanation of CCFL backlighting details, "Design News — Features — How to Backlight an LCD" Archived January 2, 2014, at the Wayback Machine, Randy Frank, Retrieved January 2013.

LCD Television Power Draw Trends from 2003 to 2015; B. Urban and K. Roth; Fraunhofer USA Center for Sustainable Energy Systems; Final Report to the Consumer Technology Association; May 2017; http://www.cta.tech/cta/media/policyImages/policyPDFs/Fraunhofer-LCD-TV-Power-Draw-Trends-FINAL.pdf Archived August 1, 2017, at the Wayback Machine

New Cholesteric Colour Filters for Reflective LCDs; C. Doornkamp; R. T. Wegh; J. Lub; SID Symposium Digest of Technical Papers; Volume 32, Issue 1 June 2001; Pages 456–459; http://onlinelibrary.wiley.com/doi/10.1889/1.1831895/full

K. H. Lee; H. Y. Kim; K. H. Park; S. J. Jang; I. C. Park & J. Y. Lee (June 2006). "A Novel Outdoor Readability of Portable TFT-LCD with AFFS Technology". SID Symposium Digest of Technical Papers. 37 (1): 1079–1082. doi:10.1889/1.2433159. S2CID 129569963.

Jack H. Park (January 15, 2015). "Cut and Run: Taiwan-controlled LCD Panel Maker in Danger of Shutdown without Further Investment". www.businesskorea.co.kr. Archived from the original on May 12, 2015. Retrieved April 23, 2015.

NXP Semiconductors (October 21, 2011). "UM10764 Vertical Alignment (VA) displays and NXP LCD drivers" (PDF). Archived from the original (PDF) on March 14, 2014. Retrieved September 4, 2014.

"Samsung to Offer "Zero-PIXEL-DEFECT" Warranty for LCD Monitors". Forbes. December 30, 2004. Archived from the original on August 20, 2007. Retrieved September 3, 2007.

"Display (LCD) replacement for defective pixels – ThinkPad". Lenovo. June 25, 2007. Archived from the original on December 31, 2006. Retrieved July 13, 2007.

Explanation of why pulse width modulated backlighting is used, and its side-effects, "Pulse Width Modulation on LCD monitors", TFT Central. Retrieved June 2012.

An enlightened user requests Dell to improve their LCD backlights, "Request to Dell for higher backlight PWM frequency" Archived December 13, 2012, at the Wayback Machine, Dell Support Community. Retrieved June 2012.

Oleg Artamonov (January 23, 2007). "Contemporary LCD Monitor Parameters: Objective and Subjective Analysis". X-bit labs. Archived from the original on May 16, 2008. Retrieved May 17, 2008.

These days, it’s pretty rare to see a cathode ray tube (CRT) monitor taking up far too much space on someone’s desk anymore. That’s because LCDs have become ubiquitous and in turn, freed up much-needed desk space while also offering a sharper picture with truer colors. Although LCD technology is incredibly common these days, not everyone knows what it stands for and how it differs from CRT screens except for the fact that LCD monitors are slimmer. Keep reading to learn about these and other great computer monitors.

LCD stands for liquid crystal display and it is used for flat panels such as monitors and televisions. It relies on those liquid crystals to create images thanks to the use of a backlight. This is very different than how the old CRT monitors used to work.

Most people know that television displays are made of individual pixels. LCD, LED, and CRT monitors all rely on pixels, but each interacts with them differently. Pixels contain three subpixels — one each that is red, green, and blue (RGB). When the subpixel color combinations change, new colors are created. And when those pixels are switched on and off rapidly, a picture or image is created. This is a basic explanation of how televisions work.

But in LCD screen panels, the pixels are placed between two polarizing glass filters. To control the pixels, an electric current is passed over the filter and interacts with a transistor that either activates or deactivates the pixels. These transistors help to create a display grid and are either known as matrixes and can be either active or passive.

In an active matrix, the display grid is composed of a thin film transistor (TFT). transistors are located at every pixel intersection. In contrast, passive-matrix LCDs have conductor grids with pixels located at every intersection. When a current passes between two conductors in the grid, the pixels are controlled.

Active matrix LCDs require less power to control light emissions from every pixel and usually offer better screen refresh rates. However, you can find some passive-matrix LCDs that offer dual scanning for faster scan times. Still, active-matrix LCDs are considered the superior choice.

LCD panel technologies were first invented in 1970, but the technology has come a long way from the first iterations that were power-hungry and relatively inefficient. As technology improved, new LCD versions were created and the following types of LCD methodologies are the ones you’re most likely to find when shopping for a monitor or television:In-Plane Switching (IPS) Panel Technology: considered the best type of panel technology in terms of image quality, color accuracy, and viewing angles. For color-critical work professions where good color performance like accurate colors, a wider range of colors, and deeper blacks on the entire screen is crucial, like graphic designers, consider IPS panels.

As compared to CRT monitors, LCDs are a massive improvement. The most obvious benefit is that LCDs are thinner and consume less electricity to create images. And as LCD technology has improved, the lower cost and increased quality have essentially made CRTs an obsolete display technology.

Along with consuming less power and being much thinner, LCDs also tend to be brighter. If you need to adjust the brightness of your monitor, you can do so with our how to change monitor brightness in Windows 10 resource article.

But with LEDs, the comparison isn’t as simple. LEDs also rely on liquid crystal technology to create images and have a thin profile, but the backlighting is different. Rather than the LCD’s fluorescent cathodes, LEDs use light-emitting diodes. While better for our eyes, how that light is placed within the screen can impact whether or not an LED screen is superior to an LCD. Specifically, only full-array LEDs where every edge of the screen has lighting, are considered better than an LCD monitor. Edge-lit array LEDs are considered inferior.

Abbreviated LCD, liquid crystal display is a flat, thin display device that has replaced the older CRT display. LCD provides better picture quality and support for large resolutions.

Generally, LCD refers to a type of monitor utilizing the LCD technology, but also flat-screen displays like those in laptops, calculators, digital cameras, digital watches, and other similar devices.

There"s also an FTP command that uses the letters "LCD." If that"s what you"re after, you can read more about it on Microsoft"s website, but it doesn"t have anything to do with computers or TV displays.

As liquid crystal display would indicate, LCD screens use liquid crystals to switch pixels on and off to reveal a specific color. Liquid crystals are like a mixture between a solid and a liquid, where an electric current can be applied to change their state in order for a specific reaction to occur.

These liquid crystals can be thought of like a window shutter. When the shutter is open, light can easily pass through into the room. With LCD screens, when the crystals are aligned in a special way, they no longer allow that light through.

It"s the back of an LCD screen that"s responsible for shining light through the screen. In front of the light is a screen made up of pixels that are colored red, blue, or green. The liquid crystals are responsible for electronically turning a filter on or off in order to reveal a certain color to or keep that pixel black.

This means that LCD screens work by blocking light emanating from the back of the screen instead of creating the light themselves like how CRT screens work. This allows LCD monitors and TVs to use much less power than CRT ones.

LED stands for light-emitting diode. Although it has a different name than liquid crystal display, it"s not something entirely different, but really just a different type of LCD screen.

The major difference between LCD and LED screens is how they provide backlighting. Backlighting refers to how the screen turns light on or off, something that"s crucial for providing a great picture, especially between black and colored portions of the screen.

A regular LCD screen uses a cold cathode fluorescent lamp (CCFL) for backlighting purposes, while LED screens use more efficient and smaller light-emitting diodes (LED"s). The difference is that CCFL-backlit LCDs can"t always block out all black colors, in which case something like a black on white scene in a movie may not appear so black after all, while LED-backlit LCDs can localize the blackness for a much deeper contrast.

If you"re having a hard time understanding this, just consider a dark movie scene as an example. In the scene is a really dark, black room with a closed door that"s allowing some light through the bottom crack. An LCD screen with LED backlighting can pull it off better than CCFL backlighting screens because the former can turn on color for just the portion around the door, allowing all the rest of the screen to remain truly black.

Unlike CRT monitors and TVs, LCD screens don"t have a refresh rate. You might need to change the monitor"s refresh rate setting on your CRT screen if eye strain is a problem, but it"s not needed on the newer LCD screens.

Most LCD computer monitors have a connection for HDMI and DVI cables. Some still support VGA cables, but that"s much less common. If your computer"s video card only supports the older VGA connection, double-check that the LCD monitor has a connection for it. You might need to purchase a VGA to HDMI or VGA to DVI adapter so that both ends can be used on each device.

CRT hardware, LCD"s predecessor, was famously susceptible to screen burn-in, a faint image imprinted on the electronic display that could not be removed.

LCD conditioning solves minor problems that occur on LCD monitors, including persistent images or ghost images. The process involves flooding the screen or monitor with various colors (or with all white). Dell includes an image conditioning feature in its LCD monitors.

Ideal for confidence monitoring in mobile trucks, news and transmission control rooms, and duplication and post-production facilities, products in the RM family of slim, lightweight LCD monitors enable monitoring of HD/SD-SDI video and composite video with embedded audio.

Summary: Samsung Electronics Co., Ltd., the number one worldwide brand of LCD monitors, together with NVIDIA, world leader in visual computing technologies, announced the launch of 3D Stereoscopic technology in the Middle East.

NEC-Mitsubishi Electronics Display of America, Inc., stand- alone vendor of flat panel desktop displays, has introduced its NEC AccuSync Series LCD monitors aimed at the system builder market.

At the same time, TPV/AOC is well-positioned to take advantage of growing worldwide demand for LCD monitors. In August, TPV introduced its Smart Integrated Panel (SIP) monitor, which is 51 percent thinner than a standard LCD monitor and includes a foldable and adjustable stem.

Hong Kong-based Diamond Technology has launched a new range of 18.1" flat screen LCD monitors with a viewable area comparable to a 20/21" CRT monitor.

Samsung Electronics has used Genesis video/graphic-processing chips in the past; publicly announced designs include the SyncMaster 500, 520, 530 and 531 LCD monitors.

- This multi-screen system uses Sharp"s new PN-V601 60V-inch professional-use LCD monitor, which is designed to make the seams (joins) between bezels unobtrusive and enable large multi-screen displays to be created.

Backed by strong growth in the LCD monitor business, Samsung has maintained the top spot in the world"s monitor market for nine straight quarters starting from the third quarter of 2006 in unit sales and seven straight quarters from the first quarter of 2007 in revenue terms, said the statement.

The new VM-17ABS 17” industrial grade LCD monitor from TRU-Vu Monitors, combines the benefits of a traditional 4:3 aspect ratio LCD with several modern-technology upgrades.

Nevertheless, contract manufacturers in this line shipped 11.49 million LCD monitors in November, up 3.1% month-to-month, showing rising inventory demand.

The Shinjuku Piccadilly, where this monitor will be installed, will be one of Tokyo"s premiere multiplex cinemas, and is being built under the concept of a "pure-white theater" with a predominant design theme of brilliant, immaculate "white." The entrance lobby features a huge open-ceiling foyer extending from the 1st floor through to the 3rd floor, and this 108V-inch LCD monitor will be set up in the center of the third-floor main lobby facing this open foyer.

According to the figures released by 3M Computer Filters 39% of more than 2,000 LCD monitor users reported a glare problem, with 7% reporting a constant problem.

"This year more than 23.5 million LCD monito