my lcd screen on my phone is black supplier

A black screen on an Android can be frustrating. If you can tell your Android phone is on, but the screen is black and won"t respond, there are a few things you can do that might get it working again.

Make sure the buttons on your device are not jammed. First, inspect the buttons to be sure they"re not caked with dirt, lotion, lint, or other debris. Then try freeing the buttons by pressing the button several times in quick successions. The button should free depress and release with each press.

Inspect and clean the charging port. Dust and debris could keep your phone from charging properly. Inspect and clean the charging port. If necessary you can gently blow into the charging port, or use a wooden toothpick to try to remove anything that"s stuck in the port. Once it"s clean, plug your phone in and let it charge for about 10 minutes. After it"s charged for a short while, try restarting the phone.

Wait until the batteries die completely and the phone shuts down and then recharge the phone, and restart it after it"s fully charged. If there is a critical system error causing the black screen, this should get your phone working again.

Gently, but firmly press your phone from both sides, squeezing the front and back together. If there"s a loose LCD connection, this could help reseat the connection and get the screen working again. If this works, consider taking the phone to an authorized service center to have them firmly reseat the LCD cable.

If your phone is in a case, remove it from the case before you start this process so that you can accurately gauge how much pressure to put on your phone without breaking the screen.

Force restart the phone. Many critical system errors can be cleared up with a force restart. Depending on the model Android phone you have you may need to use some combination of buttons to force restart the phone, including:

Plug in phone, wait five minutes, and then try to do a Force Restart. This ensure the phone has enough power to restart, and restarting could clear any errors that might be affecting the screen.

If possible, remove the battery, wait 30 seconds or more, and then reinstall the battery and start your phone. If cannot remove the battery from your phone, you"ll need to allow your phone to discharge completely. Then recharge it and try to restart the phone again.

Use caution when taking your phone apart to remove the battery. If you have a newer phone that"s hard to open with the appropriate tools, take the device to a professional who can help. Otherwise, you run the risk of doing further damage to your phone.

If you have one, remove the stylus and see if it causes the screen to come on. If it does, navigate to Settings > General management > Reset and then choose Auto Restart and schedule a time for your phone to restart. You"ll have to wait until this time to see if an automatic restart fixes your problem.

Alternatively, you could also choose Factory data reset from the screen to completely reset your phone back to factory specs. This can be useful if you"ve installed a corrupt app that is affecting your display.

Choosing Factory data reset will delete all the data, including pictures, music, etc., from your phone, so if possible, back up your Android phone so you can restore your data once the phone is working properly.

If you have a Samsung phone, use the Samsung Smart Switch to connect your phone to your computer, and then try to access it, reboot it, or back it up from there.

Reboot your phone into Safe mode. Safe mode may allow you to navigate the phone to restart it, clear the cache (more on that below), or perform other tasks that could help fix the black screen problem.

When changing up which buttons you"re holding, you may have to try a few times to get the timing exactly right. It should be about 10 seconds before you switch to the new buttons (but keep the power button depressed all the time), but switching too soon or too late will cause the phone not to boot into Recovery Mode.

Clear the cache on your Android phone. This deletes temporary files and frees resources, which could resolve whatever issue is preventing the display from turning on.

Try a factory data reset. This will restore the phone to factory settings, which deletes all your data, so be sure you have a backup of anything you don"t want to lose before you start this process, if possible.

To restart your Android device, hold down the power button for several seconds and select Restart from the menu that appears. If that doesn’t work, do a hard restart by holding down both the power and volume up buttons for up to 20 seconds.

Android is known for its vast array of brands and models, spanning all budgets. Our favorites are the Samsung Galaxy Note20 Ultra and Google Pixel 4a 5G.

Overall, iPhones are of better quality than Android phones. A premium-priced Android phone is about as good as the iPhone, but cheaper Androids are prone to issues. Android phones surpass the iPhone in several categories, like battery life and voice assistant—it’s all about the features that are most important to you.

This is the sort of thing you need to buy ( obviously match it to your own phone model) it is a replacement for the screen and the LCD (as most of you refer to it) ( the thing that displays the image and senses touch.

It is one of those phones that cannot be opened from the back and where you cannot remove the battery and where the sim card is inserted through the side.

One day i dropped the phone, it hit the concrete on its back at first it was fine. After a while the screen slowly started turning black from the bottom, as time went on more and more of the screen started turning black. It kinda looked like my phone was bleeding internally. anyway everything worked except the display. the phone was fully responsive all physical and touch buttons worked and the phones sound system still worked . Once the black screen of death took over 3/4 of my screen, the phone was still fully responsive, but using it became more of a guessing game, trying to remember where all the icons were. the next day the screen was totally black but still responsive.

this one is for the phone that i have a Samsung J530. you can replace it at home. before you buy anything check the phone model. if you are unsure of your phone model and can’t find which one it is exactly and just refer to it as by the generic term that it was advertised as, like mine was called Samsung J5 but if you click the link there is 3 different types with different arrangement of electronics, you can do the following to know exactly what you need.

I attached photos to help visualise what i’m going on about but just remember that i already cut off the broken LCD from the electronics and threw it in the trash before writing this

take off your glass screen. it will be glued on so it will take some force. try to pry it up from one of the broken corners (those are where usually cracks happen)

pry up the LCD. this is also glued and unlike the screen it is glued not just around the edges so to take it off you will have to break it (a lot) there will be shards jumping around so i advise you wear eye protection.

you will see the electronics attached to a connection point or you might see it hide behind a tab like in mine. detach it. the inly thing you need to detach are the electronics that are connected to your LCD, leave everything else as it is.

now search for an touch screen digitizer for your phone model and with the correct electronic component within those models. try to match up the electronics strip to the one that you have ( photo added of mine for referance ( sorry if it’s a bit small ))

i purchased mine from aliexpress. i know that sometims it says that it doesn’t deliver to you country like it did for me, in which case still search on aliexpress just from a different seller. should hopefully work. i got my LCD for just under £14 ( including shipping)

when your LCD arrives connect the strip to the connection port, you should feel sort of a click and it should hold sturdy. gently glue the LCD to place and then gently glue the screen back on.

This article was co-authored by Linh Le and by wikiHow staff writer, Nicole Levine, MFA. Linh Le is a Certified Mobile Repair Specialist and the Owner of SC Mobile Repairs in San Clemente, California. With more than 12 years of experience, he specializes in smartphone, tablet, and smartwatch hardware repair. Linh has an iTech Mobile Device Repair Certification and an iOS Certification. He holds a Bachelor’s degree from The Franciscan University of Steubenville.

Today, many of us rely on our smartphones to communicate, work, and play. Therefore, it can be quite alarming when they begin to act strangely – especially if you can’t get your phone to turn on at all.

One of the most concerning issues to plague smartphone users is a black screen, often referred to as the “black screen of death.” However, despite the harsh name, this issue can be remedied in several ways.

To fix a black screen on an iPhone or Android, the first (and easiest) step is to do a hard reset. This basically entails rebooting the phone’s software. A hard reset can be performed right on your phone, although the process differs depending on what type of device you own.

If you’re still staring at a blank screen, it’s possible that the cable connecting the logic board to the LCD screen has become disconnected. This can occur if you accidentally drop your phone a few times. In order to regain your screen’s functionality, the cable will need to be plugged back in.

If you want to repair a broken iPhone or Android this way, it’s best to seek help from a professional. While you may find DIY instructions online, you could risk causing irreparable damage to your device if you don’t know what you’re doing. So, if you suspect that your phone’s LCD cable is disconnected, search for a place in Las Vegas that fixes phones.

When your phone screen goes black randomly, it may be an indication that something is wrong with your operating system. In that case, a factory reset is often beneficial. During a factory reset, your device’s data and settings are completely wiped, returning the phone to its original state (i.e., the state it was in when you first purchased it).

Not sure how to do a factory reset on an iPhone or Android? The process is more involved than that of a hard reset but can still be done with moderate ease.

Keep in mind that this process takes longer than a simple hard reset – you may have to wait several minutes for your phone to restart. Once the process is complete, check to make sure the device has been restored to its factory settings. If you’re presented with the iOS Setup Assistant upon startup, you’ll know the reset was successful. From there, you can choose to restore your backed-up data.

Sometimes a power button can get stuck due to trapped gunk, debris, or sticky food. You can try to dislodge debris by pressing the button rapidly several times. In most cases, the most effective method for sticky buttons is applying a Q-tip with rubbing alcohol. Swab the area around the button to loosen up and extract dirt, dust, or whatever might be trapped in there. In some instances, you may have a broken button that will need to be repaired.

Your phone may not be charging properly if the charging port is blocked off due to grit or debris. Simply blowing on the port a few times can help. For a deeper clean, you can try gently scraping with a toothpick or using a cotton ball (or Q-tip) with rubbing alcohol. Some people recommend trying a low setting with a vacuum to extract dirt, but that can easily damage parts. Blowing out dirt with compressed air is a safer alternative.

Software issues with apps can sometimes cause a phone to act unpredictably. If you are noticing certain apps are crashing frequently, you should update them immediately. You should also consider deleting buggy apps for security and the health of your phone. If an app has crashed on your Android, you can force stop it through settings > apps & notifications -> see all apps -> force stop.

If you’re in need of smartphone repair, NerdsToGo can help. Our expert team understands the inner workings of a wide variety of devices. We’ll determine the root of the problem to get your phone up and running again as quickly as possible. And, if you don’t have time to visit our storefront for your smartphone repairs, we’ll come to you!

To find the app that causes issues, uninstall recently downloaded apps one by one. After you remove the app that causes the problem, you can reinstall the other apps you removed.

Slowly drag your finger to the bottom right corner without lifting. Try to move your finger slowly enough that you can count to 10 before reaching the opposite corner of the screen.

IMPORTANT: A factory data reset will remove all data from your phone. While any data stored in your Google Account will be restored, all apps and their associated data will be uninstalled. Before you perform a factory data reset, we recommend backing up your phone.

There could be a few different reasons why there is a black shadow on your phone screen. It could be due to a variety of hardware and/or software issues.

One common cause of a black shadow on a phone screen is a dead pixel. A dead pixel refers to a spot on your LCD screen which is either black or “stuck” displaying the same color all the time. This can be caused by various factors such as a manufacturing defect, physical damage, or even excessive heat buildup.

Another possible cause of a black shadow on your phone screen could be due to a failing LCD screen. A LCD screen is composed of several layers, and if any of them become worn out or broken, it can cause a black or dark shadow on the screen.

Finally, a black shadow on your phone screen could be caused by a software issue. It is possible for a virus, malware, or other malicious programs to corrupt your phone’s operating system, causing certain elements of your display to be blocked or distorted.

It is also possible for certain types of background apps or processes to interfere or conflict with display software, resulting in occasional issues such as this.

If you are experiencing a black shadow on your phone screen, it is recommended that you start by diagnosing the cause. The best way to do this is to examine the hardware and software components which make up the display, to ensure there are no signs of damage or failure.

It is also important to check that your phone is running the latest version of its operating system, as well as scan it with a trusted anti-virus program to make sure it is free of any malicious programs.

In order to get rid of the black shadow on your iPhone, it is advisable to start by restarting the device. Sometimes, a simple restart will be enough to resolve the issue. However, if the black shadow persists, then you can try resetting the settings.

To do this, go to Settings > General > Reset > Reset All Settings. This will not delete any personal data but it will reset any settings to the factory settings.

Another thing to try is to check the brightness settings and make sure that the brightness is not set to a very low level. You can do this by going to Settings > Display & Brightness.

Furthermore, if the black shadow still persists, you may need to look into hardware related issues. It is possible that a component inside the device is malfunctioning, resulting in the appearance of the black shadow.

First, you may have gotten ink on your phone from something else. This could have happened if you inadvertently touched an ink pen, potion of paper, or even a piece of clothing with ink on it and then touched your phone.

second, the ink may have spread from the phone to the other items near it. If you have been putting ink pens, pieces of paper, or other items on top of your phone, the ink could have easily transferred to the phone.

third, if your phone has been in contact with moisture, it could also lead to ink spreading. If you’ve been using a phone case or pouch that is not made of a material that is waterproof or water-resistant, then moisture could have seeped into the phone and caused the ink to spread.

Lastly, if your phone’s screen has been scratched or cracked, then this could also be a factor in ink spreading. If the protective coating of your phone’s screen has worn away, it could leave tiny open wounds which can be a point of entry for ink and other contaminants.

In conclusion, there are multiple possible explanations for why ink is spreading on your phone, including accidental contact with an ink pen or other ink-stained objects, ink transfer from items placed on top of the phone, moisture seeping into the phone, and a worn protective coating on the phone’s screen.

To stop the LCD from spreading on your iPhone the most important thing you can do is to avoid dropping, bumping, or jarring your device. The LCD can be particularly vulnerable to impacts and drops, as the LCD is extremely sensitive and can be easily cracked or damaged.

Additionally, make sure your device is stored in a safe and secure place out of direct sunlight, moisture, and dust. If you are using a protective case, ensure that it is made of durable and light-weight material, as cases that are too bulky can cause extra pressure on the LCD and potentially cause it to spread.

Lastly, keep your phone clean; making sure to use a microfiber cloth to remove any dirt or dust that has accumulated on the device. Taking steps to protect your phone and properly store and clean it can help to reduce the risk of your device’s LCD spreading.

No, LCD bleed does not spread. LCD bleed occurs when a portion of the liquid crystal display (LCD) panel is illuminated more in one area more than the rest of the screen. This causes a discoloration on the screen and is most often seen on dark and colored backgrounds.

LCD bleed is caused by poor or incorrect backlighting or bad quality control and is not contagious. In other words, LCD bleed should not travel or spread to other portions of the panel. The only way to prevent LCD bleed is to make sure that LCD panels are assembled properly and that the backlighting is working correctly.

No, black spots do not spread on iPhones. A black spot is likely caused by a discoloration in the LCD panel and is generally not caused by a manufacturing defect. Any discoloration may occur over time due to numerous environmental factors such as exposure to direct sunlight, varying temperatures, and high humidity.

There are preventive measures that can be taken to prevent the formation of such spots such as not leaving the iPhone in direct sunlight for an extended period of time and avoiding extreme changes in temperature and humidity.

If a black spot has already formed, it is not likely to spread or worsen, however if too much pressure is put on the screen it might cause further discoloration.

There’s no definitive answer to this question – it depends on the display and the quality of the manufacture. Some people report that their black dead pixels “spread” to adjacent pixels, while others say they’ve never seen this happen.

If you’re concerned about black dead pixels spreading, it’s best to avoid using screen display brightnesses or settings that are known to cause them. You can also try using “dead pixel fixing” software or contact the manufacturer of your display for assistance.

The first step is to check for any visible physical damage to the monitor, such as cracks or bulges. If any damage is present, it should be taken to a professional for further assessment. If there is no visible damage, then the bleed can usually be fixed by adjusting the monitor’s settings.

It is often helpful to adjust the brightness and contrast, turn on dynamic contrast options, or use software tools to fine-tune the color settings. If these steps do not work, then a monitor replacement may be necessary.

It is important to note that LCD bleed is caused by a variety of factors, so the process of fixing it can take time. Before attempting any of the steps above, be sure to follow the instructions in the user manual or contact the manufacturer or a qualified technician for assistance.

If your phone screen is starting to come off from its housing, the best thing to do is to take it to a professional to be fixed. If you are comfortable repairing it yourself, you may be able to get a new housing for your phone and replace its screen.

However, if you are not comfortable with doing the repair yourself, it is best to take the phone to a shop to be professionally repaired. Make sure the repair shop is trustworthy and has experience in repairing phones.

One common cause is a swollen battery. Over time, the battery can swell due to a number of factors, including excessive heat, age of the battery, or even a faulty battery from the manufacturer. This often causes the screen to bulge outward and can even push the screen up and away from the device.

Another potential cause is water damage. If an iPhone has been exposed to liquid, the liquid can seep into the device and cause the screen to bulge. This type of damage can also be caused by humidity or other environmental factors.

A third potential cause of screen bulging is physical abuse. If your iPhone has been dropped or subject to a hard impact, the impact can cause the display to bend or bulge. Additionally, the pressure and force of the impact may cause internal components, such as the battery, to swell.

Dealing with a broken screen on your phone is a troublesome thing. Sometimes, our phone accidentally falls on the ground, causing screen damage, the screen gets some minor scratches on the screen, or it causes serious damage to the phone, like the screen becomes black, touch doesn’t work, or sometimes both happen at the same time.

It becomes very difficult to make a call or open important documents during that time. However, you don"t need to worry, in this article, we enlisted different methods on how to view broken phone screen on computer.

Note:It is worth noting that these 3 solutions are only applicable to mobile phones with cracked screens but still responsive to touch. If the touch of your broken phone doesn"t work, please skip to the part 3.

If your Android phone screen is broken but still shows some response, you can mirror your Android phone to PC easily in a short time. AirDroid Cast offers 2 different ways to use broken phones on PC. You can mirror your broken screen with these methods.

This method is amazing by which you can remotely connect your broken screen Android phone to PC. Here is a step for casting an Android phone to PC wirelessly.Click download button in above or go to Google Play Store to install this app onto your phone and PC.

How to cast broken phone screen on computer quickly? The quickest way to mirror your broken screen Android phone is the USB option of AirDroid Cast.First of all, get physical access to the PC you want to monitor your phone.

AirDroid Cast application presents three different options for mirroring broken iPhone screens to PC. Two methods are the same as we have discussed above for Android. Now let’s introduce the last method - Airplay. This option only works for iPhone users. It is the best way to mirror phone with broken screen to PC. For casting via airplay mode, follow the below-mentioned steps:Download AirDroid Cast on broken screen iPhone and your PC.

How to cast broken phone screen on computer without touch screen? If you have dropped your phone, you can still see everything on your screen, but the touchscreen is unable to work properly. Don"t panic. We have a solution with which you can access your phone. For this, you require extra equipment. A USB mouse and a USB hub with an HDMI port.The first step is to check if your phone is unlocked or not. Make sure your fingerprint/face code/password is unlocked, and you can easily access your phone.

Sometimes you can"t even see the screen of your phone after you have dropped it. This happens after severe physical trauma. Then how can you know whether your phone is working or not?

If the phone is working, you can hear notification sounds and feel the vibration, and your touch screen is working. In this condition, you can get your data from your mobile.For this, you will need another phone. Connecting your phone to your charger. After charging, your phone will be turned on.

If your phone fell down and both screen and touch are not working. It is worst-case because, in this case, you can"t access or control your phone easily. But it is possible to connect your phone to the TV. You can access your black screen and no touch screen working phone by connecting it with the TV.

Follow these steps:Pick a USB hub, connect it to your phone, select an HDMI cable, and connect one end to the TV and the other end to the mobile USB hub.

If your phone got cracked and no screen and touch is working, you should replace your mobile screen because, in this way, you can save your precious data and preview this. If you replace your mobile screen, you may not access your mobile data.

It is hard but possible. If you are in a situation where you are not able to connect your Android device with PC via USB Dubbing, download an additional application on your Android device.

There are numerous applications available on the internet, but you have to use a screen stream over HTTP application to connect an Android broken screen to a PC. This is the finest application that connects your Android device wirelessly.

Here are easy steps to mirror your Android screen to PC:Pick your broken screen Android phone; go to the Google Play Store and download the Screen Stream over HTTP on your phone. it will take a few second to download.

As you know, it is very painful when our mobile screen gets cracked and we can"t use our phone anymore. But it becomes complicated when you have to deliver some important file to the boss or client and your phone screen and touch do not work correctly after falling. There are different methods to access your phone and share data to PC, but AirDroid Cast is the best application. It has multiple options connecting options for both Android and iPhone. Users can control their phones with its remote control feature.

Once you have found the correct part number, see HP Consumer Notebook PCs - Ordering HP certified replacement parts. Use the instructions in this document to order a replacement part.

HP recommends that you only order parts from an authorized HP repair parts dealer. Parts ordered from third-party companies might not perform as expected and might cause additional

No, the liquid damage service includes all parts and labor required to the get phone back to fully functional condition, but does not include liquid damage sensor replacement.

Due to its high cost, the logic board is the only part in the device that is not included in the liquid damage service. If the logic board has been irreversibly damaged, we will not be able to repair it and you will be refunded, minus the cost of return shipping if applicable.

It depends on the liquid. We reserve the right to decline liquid damage repair if the phone or device has been exposed to a liquid that may be hazardous in any way. Please call us at 1-877-320-2237 to inquire and make the proper arrangements.

Absolutely. Although salt water is corrosive and can be very damaging to electronic devices, we can still attempt to repair it. Our success rate on salt water damage is lower than that of a device that has been dropped in other liquid, but there is still a good chance that it can be repaired. If we cannot repair it, we will refund you the repair cost, minus the cost of return shipping if applicable.

First and foremost, do not attempt to turn the device on as that can cause a serious short circuit. Next, send the device in for our liquid damage service as soon as possible. The sooner we receive a liquid damaged device, the higher the chance we can repair it.

It is possible that a device can begin working normally on its own after liquid damage, but it is very uncommon. It is more likely that corrosion and residue deposits will begin to form on the logic board making the repair process more difficult. We recommend sending the device in as soon as possible, even if it is still wet. The sooner we receive a liquid damaged device, the higher the chance we can repairing it.

Probably. Even if only one function is not working, it could be caused by a variety of things. When a device has been liquid damaged, standard rules do not apply. This why we offer a liquid damage service specially tailored for liquid damaged devices.

Most liquid damage services are done in 45 minutes or less, depending on the level of damage. However, this estimate can vary depending on the extent of the damage to the logic board and other components.

If we are unable to repair your liquid damaged device for any reason, your payments will be refunded, minus the cost of return shipping if applicable, and your device will be returned. If your device could not be repaired and you do not want the device back or do not wish to pay for return shipping, please let us know and we will recycle the device at our repair facility.

Android is the most-used mobile operating system in the mobile world. Unfortunately sometimes android smartphones encounter problems. Android Black Screen Of Death is one of the most common problems by many android users.

Often referred to as the ‘black screen of death’ as a association to the blue screen of death in Windows computers, this problem has been a part of Android life for a few users for years. Ever since Android 2.2 Froyo, an unfortunate minority of users have had their phone reboot to a black screen with no way to get out of the cycle. Fortunately, there are a ways out of the black screen after turning on your Android device.

The most common scenario involves a reboot, the manufacturer or Android logo appearing on screen, a button may flash and then nothing but a black screen. Essentially, this means the device hit a serious issue and couldn’t load the operating system.

If you are one of android users who are facing Android Black Screen Of Death problem, read the solutions below in order to solve this problem. Doesn’t matter if you are using Galaxy S5, LG G3, or any other android device like Galaxy Note 3 etc, the solutions are same for all android devices.

Several steps are there to fix Android Black Screen Of Death problem. Follow one, test if the problem persists. If yes, then proceed with the next step.

Battery & SD-Card checkRemove the back cover of your android device and replace the battery to make sure that the contacts are touching properly, and the phone is getting power. Then charge your phone and leave it for charging for few hours.

If the first step fails to solve Android Black Screen Of Death issue, then take out the sim card, SD-card and battery from the phone and leave them for 5-10 seconds. Put the battery and charge it.

In the big majority of cases, this has addressed the black screen problem. This usually shows if an application is causing problems. If this is causing the problems for you, start troubleshooting all apps by disabling or uninstalling them until the device works normally again.

If the previous step doesn’t work, the only other option to fix a black screen after turning on an Android device is a factory reset. This will clean the device of all your personal data so it should only be attempted as a last solution and after backing up all of your data if possible.Power off the device

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Black ink spots on phone screens can be caused by a variety of factors. The most common cause is dirt or dust trapped behind the screen, which when magnified can cause what appears to be black spots.

Other causes of dark spots can include burning pixels, which can occur when a display is used for too long, or when it is exposed to too high a heat source. Poorly built displays can have blank pixels, and these can also appear as black spots.

Rubbing alcohol or other cleaning solutions can be used to address these issues. Additionally, liquid damage or a man-made puncture can also cause black spots on the phone screen, so if none of the other solutions work, it may be an indication of physical damage that needs to be repaired.

The first thing to do if you are dealing with black spots on your phone screen is to perform a general check of your device to make sure there aren’t any physical issues that could be causing the spots.

Common things to check for include any dirt or grime clogging the device’s ports, any damaged or missing pieces of the phone, or any other physical abnormalities.

Once you have ruled out any physical issues, you should then try to reset the phone by doing a hard reset. This can often fix screen issues and restore the phone to its factory settings. To do a hard reset, power off the phone, remove the battery, and press and hold the power and volume buttons simultaneously for at least 20 seconds.

In some cases, the phone may need to be serviced for a more serious issue. If none of the above steps have worked to fix the black spots, then contacting your phone’s manufacturer or taking it to a specialist phone repair shop is your best option.

In some cases, black spots on a computer or television screen may go away on their own. Depending on the cause of the spots, the display may need to be serviced. For example, if the spots are caused by pressure on the LCD panel, adjusting the display settings may remove them.

However, if the spots are caused by dust, dirt, or dead pixels, they will not go away by themselves. In this case, professional service may be necessary to address the issue.

Yes, black spots on your phone can usually be fixed. The cause of the black spots may vary, but they are typically the result of dust and dirt buildup, dead pixels, or a cracked or leaking LCD. In most cases, you should be able to get your phone looking and working like new again.

If the black spots are from dust and dirt buildup, you can typically clean them off your phone with a damp cloth and a small amount of isopropyl alcohol, or use a vacuum cleaner to gently suck away debris.

If the black spots are due to a dead pixel, you may need to contact your phone manufacturer or a professional repair technician to get the issue rectified.

Finally, if your LCD is cracked or leaking, you should take your phone to a qualified repair technician to have it replaced. You should be aware that some phone models have an LCD warranty if the LCD becomes damaged or fails.

Dead pixels on phone screens are unfortunately a common problem and can be quite frustrating. Fortunately, there are several steps you can take to reduce the chances of a dead pixel from spreading or getting worse.

First of all, avoid dropping or putting any kind of pressure on the screen. If you notice a dead pixel, try using a specialized dead pixel tool. These tools allow you to tap, tap and drag, or hold down the affected area to encourage the dead pixel to change back to its normal state.

Another thing you can do to stop dead pixels from spreading is to use a screen protector. A good screen protector can prevent scratches, dust, and other small particles from getting into the delicate parts of the phone’s display.

If you’ve tried the above tricks and still see dead pixels on your phone, your last resort is to take it to a professional repair shop. There, skilled technicians can use specialized tools to identify and fix issues with the display.

It is difficult to give an accurate answer to this question without knowing what is causing the black spot on your screen. Black spots on screens can be caused by various issues, from dead pixels to water damage.

If the spot is caused by a single dead pixel, it is unlikely that it will spread as dead pixels are typically stationary. However, if the spot is caused by something else, such as moisture damage or other external factors, it is possible that it could spread.

In order to determine whether or not the spot will spread, it is recommended that you bring your screen to a certified technician to have it evaluated. They will be able to determine the cause of the black spot and advise you on whether or not it will spread.

It is always best to have any issue with your screen professionally inspected as soon as you notice it, to ensure that it does not grow into a larger problem.

Yes, a bleeding phone screen can be fixed depending on the extent of the damage. If the screen has some minor bleeding to the colors, then it can often be fixed by adjusting the display’s color settings.

If the bleeding is more severe, it usually means that the display’s liquid crystals have been damaged. If that’s the case, then you may need to replace the LCD panel or the entire phone display assembly.

If the cause of the bleeding display is not known, then you should consult a professional to help you diagnose the issue and recommend a repair solution.

Unfortunately, no, dead pixels typically cannot be fixed as they are a physical issue with the monitor. Dead pixels are caused by a manufacturer defect or too much pressure on the screen. Depending on the severity of the dead pixel, it may still be functional, but if the affected area appears black, white or is otherwise discolored, chances are that you are dealing with a dead or stuck pixel.

In some cases, you may be able to fix dead pixels on your own with a few methods, although there is no guarantee it will work. These methods include massaging the area with a damp cloth, cycling the colors on the screen, and running pixel healing software.

Yes, it is possible to fix dead pixels on a phone. Dead pixels are caused by a stuck pixel on the screen and it can be fixed with a variety of techniques. The most effective and easiest method is to use a specialized pixel repair software.

By using this software, you can carefully run the pixel repair process by following the instructions provided for your device. This will help to ‘unstick’ the pixel and restore the picture. Other methods include using a soft cloth or a vacuum cleaner to remove any dust or debris from the dead pixel area, or using a hot air fan to blow warm air on to the pixels.

On a non-sensitive LCD screen, first turn off the power and unplug the power cord. Apply isopropyl alcohol for a few seconds to the affected area and use a soft, lint-free cloth to lightly wipe the area in a circular motion.

To maximize the effect, you may have to repeat the process several times. If you have a sensitive LCD screen, be careful with the amount of pressure you apply while wiping the area. Doing so will cause further damage to the screen.

For permanent pressure marks, i. e. , burn-in, you may need to replace the LCD screen altogether. Also, it may be a good idea to invest in an LCD screen protector to prevent further damage. It will protect your screen from any kind of pressure marks, including burn-in.

The cost of fixing a bleeding phone screen can vary greatly depending on the type and brand of phone, as well as the severity of the damage. Generally, you can expect to pay anywhere from $50-$150 to fix a bleeding phone screen.

The cost can be higher for newer or more expensive phones. If you go with a reputable repair shop, it’s likely you will get a quality repair. The cost will also depend on the severity of the damage. For example, if the phone’s LCD screen is cracked, you may have to pay more for the repair because it can be more complicated and may require more time.

If your phone is under warranty, it’s possible that the repair may be covered by the manufacturer or provider. It’s also important to consider the cost of a new phone if the damage is too severe. Depending on the phone and any available deals, a new phone may be more cost-effective than a repair.

Pressure spots on phone screens can usually be removed by cleaning the screen. Start by turning off the device to prevent damage to the display. Then, use a microfiber cloth to gently wipe down the screen, making sure to avoid applying too much pressure.

If there are fingerprints or grease marks, you may need to use a cleaning solution such as a mix of 50% isopropyl alcohol and 50% water. Apply this solution to the microfiber cloth and gently wipe down the phone screen.

When finished, use a dry microfiber cloth to remove any excess liquid. You may need to repeat this process a few times for stubborn marks. If the pressure spots remain after cleaning, you may need to use a plastic razor blade or a spiral wax cable cleaner.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

hi, my phone got into water. i had it dried on hair dryer, rice and silica gel for several days. when i try to turn it on, it vibrates but the screen is black. if i charge it, the only thing that shows is the percentage but remains unresponsive. which part of the screen should i change? thank you

Sir, Last evening Im using FB app and suddenly within a minute my phone screen turns black and everything inside working but black screen remains the same. From last 1.5 years, I didn’t let my mobile fall from hand. Need your assist and advice.

I have a Nokia 6.1 (TA-1045). It’s screen started to come off due to swollen a battery. I followed YouTube videos to use a hair dryer to carefully remove the screen and fix the battery issue. When I reinstalled the screen the lights on the side come on but the screen is black with a small gray area on the left bottom side of the display. Phone turns on and receives calls and appears to be working properly but does not show anything on the screen. I don’t know if I too much heat while trying to remove the screen.

Could it be a problem with the screen, flat cable or main board? Is there anything I could do to test if the LCD has gone bad or entire screen with digitizer has to be replaced?

Thank you. The battery issue is resolved but my Nokia 6.1 display is not working. It has a black screen with a small gray area. I replaced the display with a new one but I still have a black screen (no gray area). My phone turns on and appears to work fine other than no display. The touch screen is also working. Can this be a problem with the main board of the phone or a loose connection?

Sir, My mobile was broken due to a bike pass over the phone, the display does not work it shows some colour but the phone rang during calls and phone connected on the PC. I want to know wheather the display is broken or motherboard is broken. Shall i change the display or motherboard.

sir, my phone Vivo y71 have problem, the display turn to be like red, pink, white, blue, green, and etc screen. i can hear the notification sound, what is the problem? the display is new and it work fine until 3 day later it turn to have the problem.

Sir I have a samsung j7 2016 phone it fell down from me display is cracked but I don’t know if the phone is really working because I heard vibration sound and everything except display as it showed lines and black screen sir please tell my smartphone is working or not

Dear Sir, I have become your fan.. Such a great contents, you truely diserve a salute and lots of respect. your efforts are so useful to begginers like me. I really impressed and learning mobile repairing.

My redmi note 7 phone was immersed in water I took out immediately tried to switch it off it did not got off but after few sec display is gone and screen is black I hv dried it completely I am able to recive phone through ear phone .is it display problem or motherboard issue as local shopkeeper said it’s a motherboard issue

Hello sir, my mobile was vivo Y95 . While I’m using phone gets suddenly strucks and then dead and there is not sound while charging or while pressing lock and volume buttons also. what might be the problem of mobile

When i increases my phone brightness above 20 then display shows black screen with dim backlight and when i decreases phone brightness below 20 then its works correctly. Sometimes its works on full brightness when charger is plugged in and battery is fully charged only at 100.

I have already hard rest my phone and also downloaded firmware again in my oppo a57 but problem persists. When i power on or reboot my phone its does not show OPPO logo on screen because at that time screen works at full brightness and after certain loading when brightness comes to default setting its start displaying.

My Samsung note4 phone have only light and when I press the power button it have sound and its previous features. What is the problem sir? please help.

Hello Santosh, I was using my phone and charging my xiaomi 9T when all of a sudden the screen died! I can still hear the sound of charging and my daily alarm. Touch screen seem fine also when i try to swap away the alarm. No display on screen despite multiple restart/reboot. What could possibly be wrong with the phone?

Did the Phone Fall anytime? There could be 2 Reasons: 1) The connector of the Display is Lose in the Main PCB of the Phone. Remember that the Display and Touchscreen and two different things. The Touchscreen has different Connector to the Main Board. (2) The Display has gone Faulty and needs Replacement.

hello sir, the wire that connects the display with the motherboard is a little broken. can it be fixed or replaced without changing the whole display?

hello sir, my vivo y66 phone screen has cracked and display has gone complete black, can still hear message and call notifications and if someone calls , I am still been able to pickup calls by just swiping down but nothing is visible.

My mobile,.J8, slipped down, since then display is black. But if someone calls it is.ringing but unable to see anything on the screen. When I approach samsung authorised centre they claimed faulty mother board. Totally confused, if it is board related supposed not to receive any calls.. Isn’t it.

The PCB Needs proper Cleaning with IPA, Flux and Hot Air. If cleaning doesn’t works then you may have to replace the display. If you are not a technician then better get it done by some experienced local technician.

hello sir, thanks for helping with our queries i have a problem with my display of vivo Y95 mobile phone it is an Lcd display but sir the display is working but its pixels is being reduced i mean it is working but the display appears to be a older picture tube display with lesser pixels i did not drop the phone too it changed this way from the day i slept outdoor last night and their is some water collected on the display in morning due to fog.

Sir i have Samsung galaxy j2.it always sounds like if the battery has turned low.and sounds when it is kept on charge but the screen is full black.and the touch screen doesn’t work.the power and volume button work only when the phone is kept on charge.

Sir my phone is on but the display is not showing and sometimes I watch video and playing games and suddenly turning off but the sound can still hear and after few seconds it will turn on again and sometimes when I switch on my phone the display won’t show but the phone is on , and I have two blue lines in screen, but I don’t have any idea how to fix it all, but sir can you give me reason what is the reason in all of this

Get the Phone checked and see if the Display Connector is Fixed Properly. If it is Properly Fixed and the Problem is Still there then maybe you have to Replace the Display.

Your Touchscreen is OK. The Display is Gone Faulty. Replace with Combo Set. Also Install a Protective Gorilla Glass of the Duplicate Combo for Safety as they are very delicate.

You mean you Replaced the Old Display with New One and it is still not working. If yes, then there is serious problem with the Board. It is better to get Rid of such a Phone and Buy a New One.

Sir,mera phone Lenovo K8note hai,screen pahle aadhi hokar,linings aati thi,phir Black Hokar bandh ho rahi thi, maine combo naya lagvay ,par problem solve nahi hua,ab mujhe Kya solution de sakte hai,Kya karna chahiye .

sir i have spice phone suddely screen of my phone start blinking and than switched off when i tried nto switch on my phone its working but display of my phone is blank?

Don’t switch ON the Phone it Shorting May Happen. Disassemble the Phone Completely and Clean with Tinner or IPA Properly. Assemble Back and Check. If the Problem is NOT Solved then Disassemble again and Apply Liquid Flux All Over and Board and Give Heat. Assemble Back and Check. If the Problem is still NOT Solved then the Phone is Short. It must be Checked Properly by some Experienced Technician if you have No Experience.

I have moto x play. Purchased two years back. Phone’s display went blank but touch works fine. display is totally black. i dont know whether it is display(lcd) problem or backlight( battery or motherboard) problem? awaiting for your reply. thank you in advance.

Huawei Y520-U22 connecting and disconnecting constantly while connecting to the computer by USB cable and the mobile phone also vibrating constantly when it is on but no display.

if you can see everything very clearly on the Display and can feet the Crack on the Touchscreen then only the Touchscreen is Broken. You can also use an App called Mobile Doctor Plus. Check the Video Here: https://youtu.be/wu1PwXKJWSs

when i switched off and turned back again, the whole screen got divided in two parts Motorola logo appears both in upper nd lower half plus as boot up progresses the boot up screen shows images with slow fps(in both half) like missing some images in between, at password screen the top half screen is blank and whole display is contricted in lower half, touch is working fine, like where it should normally work even in the blank part. ..

My lenovo k8 plus suddenly gone blank and barely I can see the display under any bright light only.. everything is working fine but only the display gone black / dim.. like it is not visible.. moreover the battery is non removeable…

hello santosh iam having iphone 4s today morning i woke up i switch on my phone it was working fine the battery was low so i connected with cable after some time i noticed display showing blur and lines and withing 2 min it was all blank i tried to rest it so it gets back to normal stage but still it was blank plzz guide me the solution

Sir please inform me my lg Nexus display not working its like when i press lock key display show and when i put my password and press right key then display off so what the actual problem..? please reply soon… Thanks

sir mera mobile ka display tut gaya so mene display change karwan ke liye dia hai leken prbm yai ki mere sare person info usmai hai so kya dispaly change hoga tab mere securites bhi unlock hojai gi…??

sir, i m using moto e2 second generation phone. it was working well. suddenly, display went blank but touch works fine. display is totally black. i dont know whether it is display(lcd) problem or backlight( battery or motherboard) problem? i m ready to replace the display. but i m afraid even after replacing the display, what if it is still blank due to some than problem rather than display itself, like battery or motherboard. kindly evaluate and say whether i can order a new display for my phone or not. thank you in advance. awaiting for your reply.

Sir I bought a mobile phone (brand new). After a week or more it gave me a problem that it automatically restarts. I gave it to its authorised customer care centre for repairing. They refreshed its software but now it is giving me another problem which is that whenever I use it on full brightness its screen starts flickering but after a close observation I observed that it only flickers at grey colour family area i.e where ever there is grey colour on my lcd it flickers at maximum brightness. Is it a lcd issue or a board issue or a software issue and also all the rest colour work perfrctly and this issue is only innmax brightness. Plz guide me as soon as possible

hello santosh iam having iphone 4s today morning i woke up i switch on my phone it was working fine the battery was low so i connected with cable after some time i noticed display showing blur and lines and withing 2 min it was all blank i tried to rest it so it gets back to normal stage but still it was blank plzz guide me the solution iam facing problem

Sir I bought a mobile phone (brand new). After a week or more it gave me a problem that it automatically restarts. I gave it to its authorised customer care centre for repairing. They refreshed its software but now it is giving me another problem which is that whenever I use it on full brightness its screen starts flickering but after a close observation I observed that it only flickers at grey colour family area i.e where ever there is grey colour on my lcd it flickers at maximum brightness. Is it a lcd issue or a board issue or a software issu??? Plz guide me as soon as possible

Sir my phone is fell in water then I put it 3 hours in rice then use 7/8 hours without any problem but next day when I wake display colors are faded …..Please tell me the problem.

Sir mere pas s6 edge plus ha jab may on karta ho tu on ho jata ha aur achi tarha kam b karta ha magar jub led light of ho jay tu per on nahe hoti jub tak power batan 20 ya is se b ziada bar dabao tu kam start karta ha kia masla ho sakta ha

My zenfone max lcd not working I have checked new lcd but not working. phone starts completely and when I start my phone then lcd flat belt get very hot please give me solution

Sir my smartphone fall in water for few second and I switch off it immediately but it vibrating for 2 minute, after that I put my phone in sunlight for 4-5 hours.

sir, when I switch on the phone a blank page will appear and the phn rings when some one calls and some times it shows the symbol of the phn .can u suggest a solution plz

My HTC desire828 screen appears smtimes with white Nd black shades especially while switching on d phone.whether it’s a display problem or bcz of Nt updating software

Sir actually my phone starts recognising unnecessary touch wen exposed to light and wen brightness is increased…Things happen itself….How to overcome dis….I’m using Moto g4 plus….

My htc desire 828’s screen’s display is half black and half good working.As i use it for 5-10 minutes it starts to work properly but when screen locked n opened again again same problem.please help..

My Redmi Note has fallen on ground, on its full brightness it’s shows very dim display, rest all functions are working good, screen is visible but very less, touch is OK, pls solve the problem

I have a HTC516 dual SIM. After charging the phone I saw it working properly. Then I tried to restart the mobile. Then onward the display is not working. It is ringing call is coming. I can receive the call also.

Disassemble the phone and clean the display connector and the connector point with IPA. Assemble back and check if it is working or not. If not, then the display is gone. It need to be replaced.

Hello,my moto e screen is half visible while half screen has black and red stries over it.what can i do to it. is there any solution or i have to take it to authourised service center?

hello..i have an old sony k530i which has been broken for a long time,.my phone problem is,went i ON the power,it just show white display only at my phone until its off by it self,also its keep vibrate when i press the ON button..do you think its a software problem???please help me show how to repair it..

Sir my micromax unite 2 A106 model while pressing power button to check sms or calls display goes blank only only touch buttons blinks to see display again i have to remove battery and insert it and ON power butpleasedaily it happen for 3-4 times please help me

Display is not appearing in my mobile Nokia Lumia 610. When I was dialling a number, screen blinked and fluctuated and disappeared and now there is no display at all.

suddenly there is a sparking sound in my phone,remove the battery and sim card. After that I inserted sim and battery and ON the mobile, the SAMSUNG logo appears and then SWITCH OFF. Automatic ON and OFF repeats. please tell me about the problem and can i repair this phone?

Replace the battery and check. If the mobile phone gets ON then change the battery. Otherwise, there is problem in the power section of the mobile phone. Take it to Samsung Service Center.

Your Android phone went black screen? Try out these measures for troubleshooting. A black screen can be frustrating on an Android. There are a few things you can do that might make it work again if you can tell your Android phone is on but the screen is black and won’t respond.

What causes a black screen? There’s not one single thing that can trigger your Android went to a black screen. Here are a few explanations, but there may also be others:

1. Make sure your device’s buttons are not jammed. To make sure they are not caked with dirt, lotion, lint, or other clutter, first inspect the buttons. Then try to free the buttons in short sequences by pressing the button multiple times. With each push, the button can free-press and release.

2. Inspect the charging port and clean it. Dust and debris can prevent your phone from being properly charged. Inspect the charging port and clean it. You can blow gently into the charging port if necessary, or use a wooden toothpick to try to remove something stuck in the port. Plug your phone in once it’s clean and allow it to charge for around 10 minutes. Try restarting the phone after it’s been charged for a short time.

3. Wait for the battery to drain totally and the phone to shut down, then charge and restart the phone after it is fully charged. This should get your phone working again if there is a vital device malfunction triggering the black screen.

4. Push the phone from both sides softly, but firmly, squeezing the front and back together. This could help reset the connection and get the screen working again if there is a loose LCD connection. If this works to make them firmly reseat the LCD cable, consider bringing the phone to an authorized service center.

5. Force the phone to restart. With a force restart, several crucial device errors can be cleared up. You will need to use some combination of buttons to force the phone to restart, depending on the Android phone model you have including:

6. Plug in your phone, wait five minutes, and then try restarting the Force. This means the phone has enough power to restart, and any errors that might impact the screen may be avoided by restarting.

7. Remove the battery if necessary, wait for 30 seconds or more, and then reinstall the battery and start the phone. You’ll need to allow your phone to discharge fully if you can’t remove the battery from your phone. Recharge it then try to restart your phone again.

8. Remove the stylus to see if it causes the screen to turn on if you have one. Navigate to Settings > General Management > Reset if it does then select Auto Restart and schedule a time to restart your phone. You will have to wait until this time to see if your problem is resolved by an automated restart.

Additionally, to fully reset your phone back to factory specifications, you may also pick Factory Data Reset from the computer. If you’ve installed a corrupt app that affects your monitor, this can be helpful.

Your Android phone went black screen? Try out these measures for troubleshooting. A black screen can be frustrating on an Android. There are a few things you can do that might make it work again if you can tell your Android phone is on but the screen is black and won’t respond.

What causes a black screen? There’s not one single thing that can trigger your Android went to a black screen. Here are a few explanations, but there may also be others:

1. Make sure your device’s buttons are not jammed. To make sure they are not caked with dirt, lotion, lint, or other clutter, first inspect the buttons. Then try to free the buttons in short sequences by pressing the button multiple times. With each push, the button can free-press and release.

2.Inspect the charging port and clean it. Dust and debris can prevent your phone from being properly charged. Inspect the charging port and clean it. You can blow gently into the charging port if necessary, or use a wooden toothpick to try to remove something stuck in the port. Plug your phone in once it’s clean and allow it to charge for aroun