my lcd screen on my phone is black factory

A black screen on an Android can be frustrating. If you can tell your Android phone is on, but the screen is black and won"t respond, there are a few things you can do that might get it working again.

Make sure the buttons on your device are not jammed. First, inspect the buttons to be sure they"re not caked with dirt, lotion, lint, or other debris. Then try freeing the buttons by pressing the button several times in quick successions. The button should free depress and release with each press.

Inspect and clean the charging port. Dust and debris could keep your phone from charging properly. Inspect and clean the charging port. If necessary you can gently blow into the charging port, or use a wooden toothpick to try to remove anything that"s stuck in the port. Once it"s clean, plug your phone in and let it charge for about 10 minutes. After it"s charged for a short while, try restarting the phone.

Wait until the batteries die completely and the phone shuts down and then recharge the phone, and restart it after it"s fully charged. If there is a critical system error causing the black screen, this should get your phone working again.

Gently, but firmly press your phone from both sides, squeezing the front and back together. If there"s a loose LCD connection, this could help reseat the connection and get the screen working again. If this works, consider taking the phone to an authorized service center to have them firmly reseat the LCD cable.

If your phone is in a case, remove it from the case before you start this process so that you can accurately gauge how much pressure to put on your phone without breaking the screen.

Force restart the phone. Many critical system errors can be cleared up with a force restart. Depending on the model Android phone you have you may need to use some combination of buttons to force restart the phone, including:

Plug in phone, wait five minutes, and then try to do a Force Restart. This ensure the phone has enough power to restart, and restarting could clear any errors that might be affecting the screen.

If possible, remove the battery, wait 30 seconds or more, and then reinstall the battery and start your phone. If cannot remove the battery from your phone, you"ll need to allow your phone to discharge completely. Then recharge it and try to restart the phone again.

Use caution when taking your phone apart to remove the battery. If you have a newer phone that"s hard to open with the appropriate tools, take the device to a professional who can help. Otherwise, you run the risk of doing further damage to your phone.

If you have one, remove the stylus and see if it causes the screen to come on. If it does, navigate to Settings > General management > Reset and then choose Auto Restart and schedule a time for your phone to restart. You"ll have to wait until this time to see if an automatic restart fixes your problem.

Alternatively, you could also choose Factory data reset from the screen to completely reset your phone back to factory specs. This can be useful if you"ve installed a corrupt app that is affecting your display.

Choosing Factory data reset will delete all the data, including pictures, music, etc., from your phone, so if possible, back up your Android phone so you can restore your data once the phone is working properly.

If you have a Samsung phone, use the Samsung Smart Switch to connect your phone to your computer, and then try to access it, reboot it, or back it up from there.

Reboot your phone into Safe mode. Safe mode may allow you to navigate the phone to restart it, clear the cache (more on that below), or perform other tasks that could help fix the black screen problem.

When changing up which buttons you"re holding, you may have to try a few times to get the timing exactly right. It should be about 10 seconds before you switch to the new buttons (but keep the power button depressed all the time), but switching too soon or too late will cause the phone not to boot into Recovery Mode.

Clear the cache on your Android phone. This deletes temporary files and frees resources, which could resolve whatever issue is preventing the display from turning on.

Try a factory data reset. This will restore the phone to factory settings, which deletes all your data, so be sure you have a backup of anything you don"t want to lose before you start this process, if possible.

To restart your Android device, hold down the power button for several seconds and select Restart from the menu that appears. If that doesn’t work, do a hard restart by holding down both the power and volume up buttons for up to 20 seconds.

Android is known for its vast array of brands and models, spanning all budgets. Our favorites are the Samsung Galaxy Note20 Ultra and Google Pixel 4a 5G.

Overall, iPhones are of better quality than Android phones. A premium-priced Android phone is about as good as the iPhone, but cheaper Androids are prone to issues. Android phones surpass the iPhone in several categories, like battery life and voice assistant—it’s all about the features that are most important to you.

Today, many of us rely on our smartphones to communicate, work, and play. Therefore, it can be quite alarming when they begin to act strangely – especially if you can’t get your phone to turn on at all.

One of the most concerning issues to plague smartphone users is a black screen, often referred to as the “black screen of death.” However, despite the harsh name, this issue can be remedied in several ways.

To fix a black screen on an iPhone or Android, the first (and easiest) step is to do a hard reset. This basically entails rebooting the phone’s software. A hard reset can be performed right on your phone, although the process differs depending on what type of device you own.

If you’re still staring at a blank screen, it’s possible that the cable connecting the logic board to the LCD screen has become disconnected. This can occur if you accidentally drop your phone a few times. In order to regain your screen’s functionality, the cable will need to be plugged back in.

If you want to repair a broken iPhone or Android this way, it’s best to seek help from a professional. While you may find DIY instructions online, you could risk causing irreparable damage to your device if you don’t know what you’re doing. So, if you suspect that your phone’s LCD cable is disconnected, search for a place in Las Vegas that fixes phones.

When your phone screen goes black randomly, it may be an indication that something is wrong with your operating system. In that case, a factory reset is often beneficial. During a factory reset, your device’s data and settings are completely wiped, returning the phone to its original state (i.e., the state it was in when you first purchased it).

Not sure how to do a factory reset on an iPhone or Android? The process is more involved than that of a hard reset but can still be done with moderate ease.

Keep in mind that this process takes longer than a simple hard reset – you may have to wait several minutes for your phone to restart. Once the process is complete, check to make sure the device has been restored to its factory settings. If you’re presented with the iOS Setup Assistant upon startup, you’ll know the reset was successful. From there, you can choose to restore your backed-up data.

Sometimes a power button can get stuck due to trapped gunk, debris, or sticky food. You can try to dislodge debris by pressing the button rapidly several times. In most cases, the most effective method for sticky buttons is applying a Q-tip with rubbing alcohol. Swab the area around the button to loosen up and extract dirt, dust, or whatever might be trapped in there. In some instances, you may have a broken button that will need to be repaired.

Your phone may not be charging properly if the charging port is blocked off due to grit or debris. Simply blowing on the port a few times can help. For a deeper clean, you can try gently scraping with a toothpick or using a cotton ball (or Q-tip) with rubbing alcohol. Some people recommend trying a low setting with a vacuum to extract dirt, but that can easily damage parts. Blowing out dirt with compressed air is a safer alternative.

Software issues with apps can sometimes cause a phone to act unpredictably. If you are noticing certain apps are crashing frequently, you should update them immediately. You should also consider deleting buggy apps for security and the health of your phone. If an app has crashed on your Android, you can force stop it through settings > apps & notifications -> see all apps -> force stop.

If you’re in need of smartphone repair, NerdsToGo can help. Our expert team understands the inner workings of a wide variety of devices. We’ll determine the root of the problem to get your phone up and running again as quickly as possible. And, if you don’t have time to visit our storefront for your smartphone repairs, we’ll come to you!

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Android is the most-used mobile operating system in the mobile world. Unfortunately sometimes android smartphones encounter problems. Android Black Screen Of Death is one of the most common problems by many android users.

Often referred to as the ‘black screen of death’ as a association to the blue screen of death in Windows computers, this problem has been a part of Android life for a few users for years. Ever since Android 2.2 Froyo, an unfortunate minority of users have had their phone reboot to a black screen with no way to get out of the cycle. Fortunately, there are a ways out of the black screen after turning on your Android device.

The most common scenario involves a reboot, the manufacturer or Android logo appearing on screen, a button may flash and then nothing but a black screen. Essentially, this means the device hit a serious issue and couldn’t load the operating system.

If you are one of android users who are facing Android Black Screen Of Death problem, read the solutions below in order to solve this problem. Doesn’t matter if you are using Galaxy S5, LG G3, or any other android device like Galaxy Note 3 etc, the solutions are same for all android devices.

Several steps are there to fix Android Black Screen Of Death problem. Follow one, test if the problem persists. If yes, then proceed with the next step.

Battery & SD-Card checkRemove the back cover of your android device and replace the battery to make sure that the contacts are touching properly, and the phone is getting power. Then charge your phone and leave it for charging for few hours.

If the first step fails to solve Android Black Screen Of Death issue, then take out the sim card, SD-card and battery from the phone and leave them for 5-10 seconds. Put the battery and charge it.

In the big majority of cases, this has addressed the black screen problem. This usually shows if an application is causing problems. If this is causing the problems for you, start troubleshooting all apps by disabling or uninstalling them until the device works normally again.

If the previous step doesn’t work, the only other option to fix a black screen after turning on an Android device is a factory reset. This will clean the device of all your personal data so it should only be attempted as a last solution and after backing up all of your data if possible.Power off the device

Android smartphone these days makes our life much easier and happier. However, when your Android phone screen goes black suddenly, it will be like a disaster! Recently, when I browse the Android smartphone community, I found many users asking for help. Their posts are like this: "My phone is on but the screen is black on Samsung, why is my Samsung phone screen black?" Or "My phone screen went black but still works now, how to fix black screen on Android phone?"

If you are facing the same situation and wonder how to fix a black screen on a phone, check this post. In this post, you will learn the reason why your Android phone works but screen is black and how to fix black screen on Android phone.

Why is my Samsung phone screen black? Now you have got the possible reasons and you can avoid some circumstances caused by yourself. For other Android black screen issues, you can refer to the following methods to fix phone black screen on Android. Besides, remember to back up your Android data regularly. In doing so, you will minimize your losses if any unpleasant things happen on your Android.

Android Black Screen Repair is a professional Android problem repair tool, which has a high success rate of fixing Android issues. It can fix various Android system issues, like Android black screen of death, Play Store not working problem, Android won"t turn on or off, apps keep crashing, Android OTA update failed problem, Android gets stuck in boot loop and Android phone or tablet gets bricked. Besides, it is simple to use, even Android green hands can operate it without any difficulty by following the on-screen instructions.

Well, this easy-to-use Android Black Screen Repair supports most mainstream Samsung models running Android 2.0 and above, such as Samsung Galaxy S10+/Galaxy S10/Galaxy S9/Galaxy S8/Galaxy A8s/Galaxy A6s/Galaxy A9s/Galaxy Note/Galaxy S7/Galaxy A90, etc. And other supported Android models are about to update.

Notes: This program needs to run in-depth to fix Android black screen issue and may erase all Android data. So, you can back up and restore Android phone on computer to avoid data loss, if your Android phone works but screen is black.

2. Connect Android phone to PC via a USB cable and enable USB debugging and grant permission on your phone. After the program recognizes your Android phone, click Android Repair from the left window of this program > Tap Start below > In the next window, select detailed information of your Android phone, confirm the warning and click Next.

3. Repair Android black screen. Follow the on-screen guide to boot your Android into Download mode, then click Next on this program and the program will start to download the firmware.

Apart from the high-success-rate Android black screen repair way above, there are also other tricks to fix black screen on Samsung phone. However, these methods may fail to fix Android black screen.

2. Press and hold the Power button and Volume Down button at the same time until Android System Recovery appears on the screen. Once you enter the recovery mode, use the Volume Up and Down buttons to navigate to Wipe cache partition option. Then select and confirm your selection by tapping the Power button. Then your device will clear all caches.

In other cases, incompatible apps can also result in Android black screen. If you have recently installed an app that crashes and gets stuck frequently, it may be also the crux of phone screen turning black. Then you can uninstall the app to see whether Android black screen exists or not.

2. Boot into Safe mode. Switch Android phone on again, then, after you see Android logo on the screen, press and hold the Volume Down button for several seconds until you see the lock screen. The safe mode will be at the bottom of lock screen.

3. After unlocking your Android screen, go to Settings on your Android device > Select Application manager > Tap the incompatible app and select Uninstall. Now exit the Application manager and press Power button to restart Android device to normal mode.

If other methods cannot fix Android black screen, there is still the last way - factory reset. However, factory reset will recover your Android device to fresh factory state by erasing all data, settings, bugs, apps and user history. So, I do not recommend you to use this way. However, if you really want to use this way, back up your Android device beforehand and make it your last choice.

Now you have understood the reasons why Android phone screen goes black and the solutions to how to fix black screen on Android phone. To avoid Android phone screen turning black again, here are a few suggestions for you to follow:

This article provides 4 simple ways about how to fix black screen on Android phone. You can see clearly that the common ways to fix Android black screen are either unsure to fix or not or insecure to Android data. While Android Black Screen Repair has a high success rate of Samsung phone black screen repair and is easy to operate. Thus, I highly recommend you to try Android Black Screen Repair. Of course, you can try other common methods if you are interested.

If you are facing one of the situations above, your Android must be suffering an Android black screen issue. Some people even complain that the phone works but screen is black. It sounds that this is a serious problem but take it easy since it is resolvable. You can go with the methods provided in this article to fix Android phone screen is black problem easily.

If your Android phone is experiencing one of the above situations, then it is likely that you will encounter a black screen of death Android problem. But you don"t need to worry too much. Below we have listed a few methods to help you solve the problem of black screen of Android phone.

The easiest way to fix the black screen problem of your Android device is to reboot your device. Here, we list three different methods to restart your Android phone when it stuck at the black screen of death.

Method 1: You can hard reboot your Android device by holding down the "Home" and "Power" buttons simultaneously for 10 seconds, then releasing both buttons and holding down the "Power" button until the screen turns on.

Method 2: You can also wait for the Android phone to automatically shut down when the battery is exhausted. Then charge the phone, and press the "Power" button to turn it on.

Method 3: If the hard reboot fails, or if you do not have the patience to wait until the battery of the phone is exhausted, and the battery on your phone is removable, then you can directly remove the battery, reinstall it, and then turn on the phone.

One of the most successful method to fix black phone screen issue so as to use your Android device normally again is using a professional Android system repair tool - Android Repair. It is user-friendly and easy to use. Just hook up to the program to see how simple it will complete the works for you.

- Fix the issue of your Android phone stuck in boot screen, black/dead screen, Android won"t turn on or off, the apps are crashed, Android OTA update failure, Android system is crashed, bricked Android phones/tablets.

My phone screen is turning black? My phone screen went black but still works? Don"t worry, follow the detailed steps in the below to fix Android black screen of death problem by using Android Repair.

Step 2. Use a USB cable to connect your Android phone to the computer and go to the left side bar to click on "Android Repair" tab. The program will show you the Android problems it can fix. You can browse it and click the button of "Start".

Step 3. Fill in your phone information in the space provided or you can click the drop-down menu to select the detailed info. The program will offer a customized fix package to repair your phone according to your Android phone info. Agree the warning and tap on "Next" to go to the next screen.

Step 4. Manually type in the number "000000" to the blank area and click "Confirm" button to continue. Please confirm that the system repair may erase all data on the device.

Step 6. After booting your Android phone to download mode, you should click on "Next" button and the program starts to download the repairing firmware for your phone. When the downloading is finished, the program will begin to fix your Android device.

Step 7. Just wait for the repairing process to finish and then you can reboot your Android phone to normal situation. That"s all about how to use Android Repair to fix Android black screen issue.

Clearing cache partition is a common but effective way to fix blank phone screen issue. That is because the caches on your phone would not only slow down the device but also interrupt the running the of the system. Thus, you can try to boot your phone into Recovery Mode and wipe the cache partition on the Android.

A malware, incompatible App or improper installation would cause many Android issues. So, if you have installed application recently but it cannot run well, you need to uninstall it from the Safe Mode.

Step 1: Turn off your device at first. Then switch it back on. Here, when you see the boot logo, you need to press and hold the "Volume Down" button till the lock screen appears. After that, you can see a "Safe mode" written at the bottom of the screen, which means you have entered the Safe mode successfully;

Step 2: Navigate to "Settings" > "Application Manager" to select the application which you have installed in recent. Then click on the App to enter the "App Info" page. Just select the "Uninstall" option to remove it from your device.

Another method to fix Android phone screen turning black problem is to factory reset the device. This would be the most powerful means to accomplish the fixing.

Step 2: Use the Volume Up or Down key to find out and select the option "wipe data/factory reset". Then press the Power button to confirm your selection;

After the fixing, you will find that all the contents and settings on the device is wiped. Thus, remember to restore and backup your files beforehand.

The above are 5 different ways on how to fix black screen on Android phone. You can try them one by one until you find the one that solves your problem. No matter which brand of Android phone you are using, you can use Android Repair tool to fix Android black screen problem. It is the most ideal solution, because it can repair your mobile phone system with one-click operation. We kindly remind you to use an anti-virus application to protect your phone from viruses, and do not install unsafe applications. In addition, keep a good habit of backing up your Android phone data.

Lately, there have been complaints from Samsung users about their device screen going black without giving any sign. Well, this error is usually a result of crashed system, outdated Android version, drained battery, etc.

Anyway, there are several ways you can get rid of the Samsung black screen of death issue without requiring any technical knowledge. Yes, in this article, we"ve discussed 11 different simple solutions you can employ to fix the Samsung phone"s black screen.

A system crash might occur for numerous reasons, like insufficient storage, incompatible apps, and more. And most of the time, the crashed system could result in the Samsung phone suddenly going black screen.

Insufficient storage can lead to a system crash. However, sometimes, when the Samsung device has insufficient storage, it could simply stop responding, thus, causing the screen to become unresponsive, and often go dark.

If you do not update your Android version for a long time, there is a good chance that the system might become unresponsive. For instance, Google no longer supports Android 7.0 Nougat.

Sometimes, buttons of the Samsung device may be jammed, thus, causing your device to experience a black screen of death. If that is the case, ensure to unjam the buttons of the Samsung phone and try again. Once the button starts responding, reboot the device to get the device working again.

If your Samsung device"s charging port is filled with liquid or dirt, then chances are it won"t charge properly, thus causing a black screen error to occur.  In this case, we recommend cleaning the phone charging pot and leaving it to dry perfectly.

A solution for Samsung devices with removable batteries only!  You can deal with the black screen on Samsung phones by simply removing the battery for 1 minute and then reinserting it. There is a good chance that your screen will work again.

SD cards can be incompatible with the Samsung device most of the time, especially if you are not utilizing a Samsung SD card. To review whether the SD card causes the black screen on the Samsung phone, simply remove the card. Shut down the device and restart it again.

If your Samsung device has a non-removable battery, you can wait until the batteries die completely and then charge it again. Most of the time, software problems cause the Samsung Galaxy black screen of death issue. And a simple reboot after the batteries die entirely could effectively restore your device to a normal state after the restart.

A soft reset is nothing but simply turning off the Samsung phone and restarting it using the power button. Ensure to charge the Samsung device before you perform a soft reset.

To soft reset, you can try pressing the power button and volume down button simultaneously for more than seven seconds. This may restart the device and get the screen to a normal state again.

Another primary cause for the Samsung Galaxy phone displaying a black screen is the loose or improper LCD connections. To rectify the issue, you can remove the back cover of the Samsung phone and gently press the Samsung phone on all sides while pressing the front and back together. If the poor LCD connection is the cause, this method should get the phone working again. Additionally, you can take the Samsung device to an authorized repair shop to reset the connections properly and avoid future mishaps.

You can fix the Samsung black screen issue by rebooting your device into safe mode. What this does is, it returns all settings on your Samsung device to default. Thus, enabling you to detect if an installed app is causing your phone to display a black screen, freeze, or perform operations slowly.

There is a good chance that some incompatible apps may have messed up with the software, which resulted in the Samsung phone"s black screen of death. So, you can opt for Factory Reset remotely via Find my device.

Of course, if all these methods do not work, contact the Samsung support center. Better yet, visit the nearest service center and let the professionals repair the phone for you. A door service is also available, which you can book from the official Samsung device.

With methods mentioned above, you can fix the black screen issue of your samsung now. However,to avoid data loss when you encounter issues like the black screen on a Samsung phone in the future, ensure to backup the device regularly. Since the discontinuation of services like Samsung cloud for media, it"s becoming difficult for users to backup the contents on Samsung devices. Nevertheless, you could utilize third-party applications like MobileTrans and backup your Samsung device with a click.

Step 3.Once you click on the Start option, MobileTrans will start restoring the selected file types on the Samsung device. You can also tick the Clear data before copy option, which will erase the chosen files after restoring them to your Samsung device.

Samsung phone black screen issues are not common, but they can happen. And as mentioned already, the Samsung phone"s black screen of death is often caused by small issues like incompatible apps and insufficient storage. And a simple reset or one of the solutions mentioned in this guide can effectively get the screen working again. However, it is critical to note that sometimes the cause can be significant. And you may have to perform a Factory reset to deal with the black screen on a Samsung phone. That is why it is essential to backup your Samsung device regularly using the best tools like MobileTrans. As mentioned, you can also restore the backups efficiently using MobileTrans.

Strangely, the phone works just like usual. It still can receive calls, messages, chats or any notifications, but the screen is black/blank maybe that"s caused by some system problems/errors that affect the screen.

My phone (Samsung Galaxy E5) is not using extension batteries, so I can"t remove them because the batteries are sticks into the phone (like Apple iPhone batteries). I tried to restart the phone by holding the power button for a minute, but that doesn"t work.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

To find the app that causes issues, uninstall recently downloaded apps one by one. After you remove the app that causes the problem, you can reinstall the other apps you removed.

Slowly drag your finger to the bottom right corner without lifting. Try to move your finger slowly enough that you can count to 10 before reaching the opposite corner of the screen.

IMPORTANT: A factory data reset will remove all data from your phone. While any data stored in your Google Account will be restored, all apps and their associated data will be uninstalled. Before you perform a factory data reset, we recommend backing up your phone.

Tip: Airplane mode is automatically turned on when you enter safe mode. We recommend turning airplane mode off in order to continue using features such as GPS, Wi-Fi, and making phone calls.

Tip: Airplane mode is automatically turned on when you enter safe mode. We recommend turning airplane mode off in order to continue using features such as GPS, Wi-Fi, and making phone calls.

Slowly drag your finger to the bottom right corner without lifting. Try to move your finger slowly enough that you can count to 10 before reaching the opposite corner of the screen.

Under your Pixel 5 phone’s screen, at the top center, you can see a white dot. This white dot is your proximity sensor. When your proximity sensor is on, the dot shows through the display. The dot can blink or stay solid.

Your proximity sensor keeps your phone’s screen off while you hold your phone near your face during a call, when your screen is locked, and when used by certain apps. Keeping the screen off helps save battery and avoid accidental taps on the screen.

All Pixel phones have proximity sensors. Because the Pixel 5’s display goes almost to the edge, you can see the Pixel 5’s sensor under the screen. Check our Pixel 5 phone diagram.

IMPORTANT: A factory data reset will remove all data from your phone. While any data stored in your Google Account will be restored, all apps and their associated data will be uninstalled. Before you perform a factory data reset, we recommend backing up your phone.

New iPhones have almost no buttons, which is great for maximizing screen size, but can cause a problem when the screen goes black and won"t turn on. An unresponsive touchscreen will turn your $900 smartphone into an expensive brick.

Luckily, there are ways to fix nearly every "Black Screen of Death" glitch on your iPhone. Depending on the problem, you might just need to leave the iPhone alone for a while, or plug it into your computer.

Plug your iPhone into a working charger and leave it for at least an hour. If you come back and it still won"t turn on, then you can move onto the next steps.Quick tip: You should also feel the back of your iPhone, without its case. If it"s incredibly hot, your iPhone might be overheating and will need to cool down before you can use it again. Leave it in a cool area for a while.

Hard reset your iPhoneOn an iPhone without a Home button (iPhone 8 and newer): Press the volume up button, then the volume down button, and then press and hold the side button until you see the Apple logo appear.

Recovery mode is a feature that lets you connect your iPhone to a computer so the computer can repair it. It usually does this by installing a fresh version of iOS, the software that your phone runs on.Quick tip: There"s a chance that putting your iPhone into recovery mode may factory reset it, erasing all of its data. Treat recovery mode as a last resort, and if you have the chance, make sure to back up your personal data.

If none of these solutions work, then you"ve run into a problem that you probably can"t fix on your own. It"s probably a hardware issue — for example, the wires that power your iPhone"s screen might be faulty.

Hitting an unresponsive black screen can be scary, especially if your iPhone plays a critical role in your job or social life. So once you"ve fixed the black screen, take steps to make sure that it doesn"t come back.

Despite its price, the iPhone is a delicate device that needs to be handled carefully. Obviously, this means that you shouldn"t drop it or smother it in honey. But it also means that you need to keep track of its temperature.

An iPhone that gets too hot or too cold will shut down and give you a black screen — worst case scenario, your battery might short out permanently. This can be a big problem if you"re trying to run multiple high-performance apps at once, or have your iPhone in a thick case that traps heat.

If you keep hitting black screens despite uninstalling recent apps, there might be an issue with your version of iOS. You can put the iPhone into recovery mode, like we described earlier, or you can factory reset it.

Factory resetting an iPhone will erase all of its data, and return the phone to the state it was in when you bought it. It"s an extreme but incredibly useful way to fix major glitches.Important: Be sure to back up your personal data before performing a factory reset.

To factory reset your iPhone, open the Settings app and tap General, then Reset iPhone. On the screen that appears, select Erase All Content and Settings.William Antonelli

William Antonelli (he/she/they) is a writer, editor, and organizer based in New York City. As a founding member of the Reference team, he helped grow Tech Reference (now part of Insider Reviews) from humble beginnings into a juggernaut that attracts over 20 million visits a month.

Outside of Insider, his writing has appeared in publications like Polygon, The Outline, Kotaku, and more. He"s also a go-to source for tech analysis on channels like Newsy, Cheddar, and NewsNation.

The iPhone® continues to be one of the most widely used smartphones available and it"s not hard to guess why. Apple® products are accessible, easy to use, and pair effortlessly with the other devices we use every day.

We use our iPhones for everything from work to staying connected to family, so it can be a huge hassle when it stops working. Despite their durability, iPhones can still break or malfunction and a common issue Asurion Experts see regularly is what"s called the "black screen of death."

Almost every electronic device has its own version of a "screen of death." Computers and laptops have the "blue screen of death" and game consoles have the "red ring of death." This phrase is used to identify issues that the device is facing that are serious enough to cause the device to become completely non-working, often needing professional intervention to repair.

In the case of the iPhone black screen of death, the device"s screen is blank and won"t respond to touch, but you can tell by vibrations or sounds that the phone is still functioning. This is an immensely frustrating issue to face because, without screen visibility or touch responsiveness, your iPhone is not much more than a vibrating paperweight.

When your technology works, your life does too. Asurion Experts have the tools and experience to help fix problems in more than 6,000+ devices, and the iPhone is no exception. While it"s true that many of these "issues of death" are serious malfunctions, very few of them are irreversible. Here are the tactics our experts recommend to diagnose and troubleshoot your iPhone"s black screen of death and get it working again.

Most often, a black screen of death issue can happen from damage to the screen during a bad drop or accident. If the components connecting the screen to the motherboard sever, the phone screen will be unresponsive. But the black screen of death can also happen because of software issues in the device. Malfunctions with an iOS upgrade or downgrade can potentially cause the issue, as well as complications from attempting to jailbreak or modify the firmware on your own.

No matter how the black screen of death in your iPhone occurred, there are a few troubleshooting methods that you can use to try to fix it or at least prevent the issue from permanently affecting the data or photos you have stored on the phone.

The very first troubleshooting trick to try is just making sure that your device is, in fact, a victim of the black screen of death. A drained battery can look just like this issue, so it"s important to rule that out first. Connect your device to a functioning power source, and wait for it to respond. If you see the Apple logo or another interaction on the screen, you"ve solved it. If you continue to see no response from the screen or the device vibrates as if it was charging, you know with certainty that you"re facing the black screen of death.

Malfunctions within app software can also cause iPhones to have the black screen of death. All apps are not created equal, and if your iPhones current software is not compatible with a particular app, you could get a screen malfunction. In this case, killing the app should enable your screen again. To do this, swipe up or quickly press the home button twice (if your phone still has one) to see all of your open apps. Swipe up on your recent apps to identify which is causing the malfunction and close it. With the app closed, you should be able to have full responsiveness on your screen again. If the problem persists or you can"t access your apps due to a blank screen, you"re likely dealing with a bigger issue.

If you"ve encountered issues with your favorite electronic devices before, you"ve probably heard someone say, “Well have you tried turning it off and back on again?". This may not sound like the most helpful advice, but it"s actually the first thing our experts suggest when facing a potential software or hardware issue with your iPhone. Turning a device off and back on again is sometimes called a forced restart, or a hard reset. Doing this simple action forces your iPhone to power cycle and in turn, clears its short-term memory. This will not wipe your device or remove any of your data; it just gives the device an opportunity to clear all open applications and start fresh. If your issue is being caused by a rogue app or malfunctioning system process, the force restart will clear it.

If none of the aforementioned troubleshooting tips solve your iPhone"s black screen of death, it"s time to consider heavier duty fixes. iPhones have a special troubleshooting tool called "recovery mode" that allows a computer to diagnose and attempt to fix software issues.

Situations like these are why it is beneficial to perform a backup on your iPhone from time to time. That way, if something goes wrong, you"ll have a recent backup to restore from. Need help? Check out our guide on how to restore your iPhone from a backup.

If after these troubleshooting tips, you"re still left with the black screen of death, it may be time to consider a factory reset for your iPhone. Factory resets should always be the last thing you try because unless you have backed up your iPhone recently, you risk losing your data. But if a truly sinister bug in your system is stopping your screen from working, a factory reset could take care of it.

If you"ve tried these steps and still need a little help, we"re right around the corner. Schedule a repair at the nearest uBreakiFix® by Asurion or Asurion Tech Repair & Solutions™ store and our certified experts can get your device back up and running as soon as the same day.

protect, connect, and enjoy the tech they love most. And smartphones are no exception. Your life is on your device, make sure it’s protected. Learn more about Asurion phone insurance plans today.

Dell recommends ensuring that the device drivers and BIOS are up to date using the SupportAssist application for optimal video performance and to help resolve common video-related issues.

NOTE: When SupportAssist does not show up in the search results, go to the SupportAssist for PCs and tablets page for information about downloading and installing SupportAssist.

To learn how to manually download and install a device driver such as Chipset, Video card (GPU), and Monitor driver (if required, most monitor drivers are delivered automatically through Windows Update) on your Dell computer, see the Dell knowledge base article How to Download and Install Dell Drivers.

We must verify whether the problem is the display screen of the laptop, video card (GPU), or video settings on the computer. A straightforward way to identify this is to connect the laptop to an external monitor or TV.

If the issue persists on the external monitor, it may be an issue with the video card (GPU) or video settings and not the laptop LCD panel. Go to verify display or video issues in Windows Safe Mode. Otherwise, go to the next step.

Performance issues may occur if there is any damage to the LCD screen. The display may stop working, work intermittently, flicker, display horizontal or vertical lines, and so on, if there is damage to the display screen.

If you notice a physical damage, contact Dell Technical Support to learn more about repair options that are available in your region. If there is no damage, go to the next step.

Dell laptops have integrated diagnostic tools that can determine if the screen abnormality is an inherent problem with the LCD screen of the Dell laptop or with the video card (GPU) and computer settings.

When you notice screen abnormalities like flickering, distortion, clarity issues, fuzzy or blurry images, horizontal or vertical lines, color fade, running a diagnostic test on the LCD helps identify if the issue is with the LCD panel.

Press and hold the D key and turn on the computer to enter the LCD built-in self-test (BIST) mode. Continue to hold the D key until you see the entire screen change colors.

If you do not detect any screen abnormalities in the integrated self-test mode, the LCD panel of the laptop is functioning properly. Go to the Update the video card (GPU) driver, monitor driver, and BIOS section.

If you notice any abnormalities in the LCD built-in self-test mode, contact Dell Technical Support to learn more about repair options that are available in your region.

Windows Safe Mode does not load any drivers, startup applications, third-party services. This will help us identify if the issue is related to the operating system, video settings, device drivers, or third-party software. To learn how to boot your computer into Safe Mode, see the Dell knowledge base article below based on the operating system that is installed on the computer:

Windows updates can support your Windows operating system in many ways. Windows updates can solve specific problems, provide security patches and protection from malicious attacks, or even add new features to the operating system.

Display settings like brightness, refresh rate, resolution, and power management may affect the performance of the LCD screen on your Dell laptop. Changing or adjusting the display settings can help resolve several types of video issues.

NOTE: Depending on the model of the Dell laptop, the shortcut keys to adjust or change the brightness may differ. See the User Guide or User Manual of your Dell laptop for model-specific information.

If you find that the Dell laptop is unresponsive to touch, touch stops working entirely, or other touch-related issues, you can try some common troubleshooting steps to help fix the touch-related issue.

Stress Test can thoroughly diagnose the video card (GPU) on your computer and report any potential hardware problem. Running a stress test on your computer can verify if the hardware components are stable and thus reliable.

System Restore is an integrated Windows tool that is designed to protect and repair the operating system. When something goes wrong with your computer, System Restore must be used before you try to restore the operating system to factory default settings.

If the diagnostic tests on the LCD panel and the video card (GPU) passed, it is most definitely an issue that is related to software that is installed on the computer. If the above troubleshooting steps did not resolve the issue, you may try to restore the computer to factory default settings as a last resort.

WARNING: Restoring or resetting the computer to factory default settings will erase all personal data on the computer. Back up all important data like documents, images, music files, spreadsheets, videos to an external hard drive or a cloud-based backup like Microsoft OneDrive.

Dell computers are built with a small amount of hard disk space that is reserved for reinstalling the operating system. This method is the easiest way to restore the computer to factory condition. The restoration process deletes all user data from the computer, so be sure to back up all your files before starting this process.

Are you currently dealing with a black screen of death on your Android device? Don’t panic. You can solve the black screen of death by repairing the device using a third-party repair tool, force- restarting, or even factory-resetting.

I remember facing this issue on my Samsung Galaxy Note 20 last year. I tried some of the popular solutions but nothing worked. Finally, I wiped the phone"s cache partition and it fixed the problem. To help other people experiencing the same issue, I have compiled a list of fixes that you can use to deal with the black screen of deathproblem.

The first thing you need to do is to charge the device. What you may think is a black screen of death could be nothing more than a dead Android phone.

So, before hitting the panic button, plug your Android phone to a power socket and let it charge for about 30 minutes. If it comes on, then the black screen of death issue was just a false alarm.

You can get around this problem by force-restarting the Android device. This is not the usual way of restarting where you need to see the controls as you choose the options. A force restart can work well even with a black screen of death since all you are dealing with are physical buttons on the side.

Once the device is turned off, hold and press the Power, Volume Down buttons at the same time for 7 seconds. This will restart the device and the screen of death should be dealt with at that point.

Most Android devices these days don"t have removable batteries. So this solution may not work for you unless you have the tools to open the back of your device to get the battery out. However, this is not recommended as you may spoil the Android phone in the process.

However, for those with older Android models with removal back covers and batteries, taking it out for a few seconds and fixing it again is a solution you can use to fix Android black screen. The problem could be a result of the Android phone battery getting misaligned by a fall or a bump.

There are different tools you can use to fix the black phone screen of death on your Android device. One of the most effective ones is the Android Black Screen Repair tool.

It is an Android repair tool that has a high success rate and from those I tested, the Android Black Screen Repair tool was the easiest to install and use. It doesn"t only deal with black screens, it can also fix devices that refuse to turn on or off, apps that crash without warning, and update issues,among others.

The Android Black Screen Repair tool is compatible with almost every major Android model. You need a computer and a compatible USB cable to use the tool on your Android device.

This will boot your device into Download mode and you can click on Nextagain from the PC to begin downloading the needed Android software for your Android phone.

Once the download is complete and the firmware verification is done, the Android Black Screen Repair toolwill automatically start repairing the Android phone. Wait until the process runs its course.

When the cache history becomes too big, your Android phone is bound to run into a lot of issues. One of them is a black screen of death. The best way to stop this from happening over and over again is by clearing the cache partition.

You need to ensure that the device is well charged with at least 5% power. It is best if you just plugged it into the power socket for the entirety of this fix.

Press and hold the Volume UpandHome buttons simultaneously. Then, without letting go of them, press the Power button until you see the Recovery Booting option appear on your screen.

Once that"s done, choose Reboot System Now to get the Android phone working again within minutes. The black screen of death Android issue should be gone now.

Using incompatible apps or installing apps from untrusted sources will wreak havoc on your Android device. A black screen of death is just one of the many issues you will have to contend with.

Apps that crash frequently every time you try to use them will cause your Android phone screen to hang all the time, leading to constant black screens of death. You need to identify the app responsible for this immediately and get rid of it. If you don"t remember, uninstall all the newest apps you got before your Android device started malfunctioning.

A factory reset is the last option you should turn to when everything else fails to get your Android screen back to normal functioning. You will lose all your data if at this point you have not been creating backups. A factory reset will wipe everything from your phone and revert it to manufacturer settings. The black screen of death will not allow you to access the backup option if you have reached this point.

Allow the process to run to completion. The device will then restart automatically and you should be able to use your Android phone screen without any more problems.

If you have found a working solution around the Android black screen of death issue, you need to safeguard your device from undergoing that problem ever again. The following tips should get you started.

Update your Android device regularly. Staying too long without upgrading to the latest software is a recipe for various problems like Android black screen, something that a quick update may have solved in the first place.

Get a reliable anti-virus or cleaning app that will help you clear any junk files from your device to avoid a pile-up of cached files. Never fill up your internal storage. Leave some breathing space for your Android phone"s RAM to better operate.

Back up your Android phone as regularly as you can as you never know when you may need to do an impromptu process like factory resetting the phone. A backup once every week is enough.

A black screen of death is not the end of your device. Most times, it is a problem caused by a fixable glitch. You don’t have to rush back to the store and spend extra money to have it fixed. If you have been experiencing this issue all the time then check out the review above and find a solution that works for you.

The vertical lines on phone screen Android problem mostly occur when your device becomes too old or if there is any hardware damage. Well, the problem seems quite serious. However, you can fix the issue by restarting, power cycling, or factory resetting your Android phone. Also, go through this article completely to know more fixes to resolve this problem and use your phone without any further problems.

The problem won’t let the users access their phone as the app icons or screen seems blurry or unclear almost making the device difficult to use. So, here, in this article, we have covered all the workable fixes that will help you get out of this situation and let you access your phone once again. So, without any worries, follow the mentioned troubleshooting methods step-by-step to fix vertical lines on Android phones.

It’s very important to know what you should do before you try to solve any kind of issue or error. You must be familiar with the “Backup” word and this is very important to do.

It may happen that some kind of data loss might occur while following the repair methods, so don’t delay doing this thing first and keep your data safe. Check out the easy and effective ways to backup Android data on a PC.

Now it’s time to check out how to fix vertical lines on Android phone. Go through them and check out which one works for you to fix the issue that was due to a software glitch.

Whenever you come across vertical lines on mobile screen the first thing you should do is simply restart your phone once. Restarting has the power to fix small glitches that occurs on Android phone.

So without thinking much of the issue, it’s better to restart your device and check if the error is resolved or not. If the same thing continues, then move to the next solution.

You should ensure your phone is fully charged. If not then charge your device to full. This is instructed because some Android phone users have tried this and it helped them to get rid of the vertical lines issue.

Another solution that you can try to troubleshoot vertical green line on phone screen is to remove your device’s battery, case & SIM card. Many users have found this way helpful in their case, that’s why it is suggested to you.

All you need to do is to remove the battery, case & SIM card from your smartphone and turn it on. After doing so, put your phone on a cold surface & leave it for some time. Then insert the battery & SIM card back into your device.

Even restarting your phone in safe mode also has the chance to find out the culprit and can solve vertical lines on mobile screeneasily. Doing this will check if any third-party app is the culprit for the problem.

Remember that safe mode allows only pre-installed apps to run on the phone system and due to this, it becomes easy to check if any third-party app is creating the issue.

In this mode, if the vertical lines are removed then ensure that the third-party app is the culprit for it. So just find out the latest app installed on your phone and immediately uninstall it.

Generally when your phone drops from a height then there is a possibility that LCD might have disconnected from the logic board. If this happens then try to push the screen gently just to re-establish the connection.

You can do it by yourself by simply placing one finger on the screen and another one on the device and then pressing the screen gently. You should be careful not to press hard as it can break the device.

Due to the outdated version of the OS, users are facing numerous errors and bugs on their smartphones. Maybe vertical lines on Android phone screen issues have occurred because of the outdated phone. So simply check for the latest update of your device OS by following the below steps:

You should also try to factory reset your Android phonein recovery mode. Though this method has a chance to erase all your data from your phone but it can fix white lines on the Android phone screen you are coming across.

You should take your device to a repair shop or service center where your entire phone’s display will be changed. Though, it may not be easy to do this either because it is cheap or will take time.

Whenever you come across such kind of error or issue on an Android phone then you have a chance to fix it by using Android Repair Tool. This is one of the best tools that help you to fix any kind of errors that occurs in an Android phone.

It has worked effectively to repair several issues like Android black/blue screen of death, apps keep crashing, settings has stopped, and others. So this can be useful to fix vertical lines on Android phones.

Well, mostly the phone display when not works or shows you vertical lines then somewhere the causes is due to a fault in a hardware component. This issue can only be fixed at a service center. But before going there, you can try several manual options to fix vertical lines on Android that are caused by a software glitch.

Yes, the vertical lines on Android phone screen are generally caused by faulty hardware or software component. But the issue can be fixed by following manual options or at a service center. But the vertical line on Android is fixed without any further problem.

Several times, your Android phone screen starts flickering or flashing. In such a situation, the best way to fix the issue is by putting the device into safe mode. This will give you an idea of whether the issue is related to apps or others. And then delete the apps causing problem.

So, above are the methods that will help you resolve vertical lines on phone screen Android.However, in case you lost any of your Android device’s data, use the

I hope, the article served its purpose well by providing you with enough solutions to resolve the issue and let you use your phone once again without further issues. In case, you have any queries or doubts related to the article, feel free to ask us on our Twitter or Facebook page.

James Leak is a technology expert and lives in New York. Previously, he was working on Symbian OS and was trying to solve many issues related to it. From childhood, he was very much interested in technology field and loves to write blogs related to Android and other OS. So he maintained that and currently, James is working for androiddata-recovery.com where he contribute several articles about errors/issues or data loss situation related to Android. He keeps daily updates on news or rumors or what is happening in this new technology world. Apart from blogging, he loves to travel, play games and reading books.