ips 4.3 inch 16.7 m tft lcd capacitive touch for sale

By continuing to use AliExpress you accept our use of cookies (view more on our Privacy Policy). You can adjust your Cookie Preferences at the bottom of this page.

※Why is this display so cheap?ER-TFTM043A1-7S is needed by electric vehicle charging station in larger quantities. Mass production results in lower costs.

ER-TFTM043A1-7S is 800x480 pixels 4.3 "IPS tft lcd display with SSD1963 controller board and capacitive touch panel with touch controller,full viewing angle,superior display quality and easily controlled by MCU such as 8051(C51), PIC, AVR, ARDUINO,ARM and Raspberry PI .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.Portrait mode is also available.

It supports 6800, 8080 8-bit /9-bit/16-bit/18-bit/24-bit parallel interface.Built-in MicroSD card slot and zif connectior.It"s optional font chip, flash chip and microsd card.We offer pin header connection on board by default.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 4.3"TFT Touch Shield with Libraries, Examples.Schematic Diagram for Arduino Due,Mega 2560 and Uno . For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

ER-TFT043A2-3 is 480x272 dots 4.3" color tft lcd module display with driver IC ST7282 and optional capacitive touch panel with controller and connector,optional 4-wire resistive touch panel with connector,superior display quality,wide view angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,ARM and Raspberry PI .

It can be used in any embedded systems,car,mp4,gps,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports rgb interface. FPC with zif connector is easily to assemble or remove.Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 4.3"TFT Touch Shield with Libraries, Examples.Schematic Diagram for Arduino Due,Mega 2560,Uno and 8051 Microcontroller Development Board&Kit.

Maclight 4.3 inch tft lcd have the standard resolution with 480x272 pixels and 800x480 pixels, regular RGB interface with ST7282, OTA5108, HX8257A IC driver, and custom made MCU interface with SSD1963, RA8875 series interface for difference application.

Our 4.3 inch tft lcd have standard working temperature and wide working temperature 4.3" lcd that can up to -30~+80 °c, The 4.3" lcds have standard viewing angle TN TFT LCD type ( 6 o"clock and 12 o"clock) and IPS tft lcd with full viewing angle.

Our 4.3" tft touch screen could combine with resistive touch screen (RTP) and capacitive touch screen( CTP / PCAP), to the 4.3" PCAP, air-gap bonding and optical bonding to the CTP is welcome to us. to the 4.3 inch capacitive touch, we could custom make the CTP cover glass up to 3mm thickness cover glass and anti-finger print, anti-glare surface treatment.

Maclight 4.3 inch tft lcd display is also including 4.3" sunlight readable tft lcd display with 1000 nits high brightness tft lcd, that is suitable for outdoor application.

1. Sizes: please confirm the display area sizes for the project, the typical 4.3" tft lcd display active area is around 95.04*53.86 mm (4.3" diagonal).

2. Resolution: Would the display used in landscape or portrait type, 4.3" tft lcds have 480RGB*272 and 800RGB*480 in landscape type, and 480RGB*800 in portrait type. if we choose the IPS lcd with full viewing angle, we could use the 480RGB*272 and 800RGB*480 landscape lcd, and rotate 90 degree, then turn to portrait 4.3" tft lcd as well.

3. Temperature: What working temperature would you need for the device application, Standard working temperature: -20~70°C, Wide working temperature: -30-80 °C

4. Viewing angle: would the 4.3" lcd be viewed from top viewing or bottom viewing, or would require full viewing angle? Maclight have full viewing angle IPS 4.3 lcd, and 12 o"clock (top), 6 o"clock (bottom) viewing angle for optional.

5. Working environments: if the lcd screen is used indoor, you could choose the standard brightness than lower than 400cd/m2, if used in outdoor, we suggest to choose the tft lcd brightness higher than 500cd/m2, that can be sunlight readable.

7. IC drivers: 4.3" TFT lcd have tradition IC driver ILI6480B, HX8257A, and new ST7282 IC drivers, that can fit the 4.3 lcds from tft lcd manufacturers Innolux, Tianma, BOE, Hannstar etc, because 4.3" lcd is digital RGB interface, the IC driver is not matter when choosing a new 4.3" lcd, or a replacement for other 4.3" lcd.

8. Interface: The typical 4.3" tft lcd module interface is RGB interface, we could make it with MCU interface, and HDMI interface, that is compliance for mainly driver boards in the market.

Please contact us for more 4.3" tft lcd products, we still have many 4.3" lcd not on this list below, and we support custom make 4.3" tft lcd as well.

If you are seeking 4.3" tft lcd, Maclight could provide the one stop 4.3" lcd solution for you, best technical support, 12 months warranty time and after sale services, high quality, competitive price, and stable supply, Welcome to contact us for more 4.3" tft lcd display module information.

Fangsheng is a high-tech company specializing in R&D, production and sales of LCD and LCM since 2001. Our company boasts a professional team with years of experience in the LCD technology, and has established a perfect quality and a management system.We will spare no effort in innovation and lean manufacturing.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Offering you a complete choice of products which include Dwin DMG85480C050_03WTR IPS HMI LCD Resistive Touch Display, Dwin DMG12480C068_03WTC HMI Touch Screen, Dwin DMG48270C043_15WTR Cheap HMI Touch Display, Dwin DMG80480T043_09WTC HMI LCD Display, Dwin DMG80480C070_15WTR Shell HMI Display and Dwin DMG80480T050_A5WTR LCD Capacitive Touch Shell Display.

The DMG85480C050_03WTR - 5.0 Inch 480x854 TTL IPS HMI LCD Display Resistive Touch 16MB Flash Buzzer SD interface is developed by DWIN. The NOR Flash memory in the display is available to store the user database.

The LCD is integrated with a running DGUS II system, a GUI (Graphical User Interface) development software. The pre-installed UI user interface development software can be used to develop your own design and customised features like buttons, text display, graph and slider etc. The T5L1 DWIN development software is a human-machine interface dedicated to ASIC designed by DWIN Technology for AIoT application applications. This software is based on a T5L chip that is a low-power, cost-effective dual-core 8051 processor. Key Features T5L1n Chip, running DGUS II system, connect with any MCU even 8 bit

With GUI & OS two kernals, GUI kernal with rich touch and display controls, DWIN OS kernel is open to the user for the second-development, via DWIN OS language or KELI C51

This model is the intelligent LCD display module with a capacitive touch screen for user interactivity. It has onboard serial UART PORT which can be controlled by any microcontroller via a simple yet powerful command set. It can be used as TFT Display & Touch controller in various electronic equipment such as vending machines, currency counting machines, washing machines, and many other similar appliances.

The DMG80480T043_09WTC - 4.3inch 800x480 IPS Industrial HMI UART LCD Display Capacitive Touch, 16MB Flash Buzzer SD interface is developed by DWIN. The NOR Flash memory in the display is available to store the user database.

The LCD is integrated with a running DGUS II system, a GUI (Graphical User Interface) development software. The pre-installed UI user interface development software can be used to develop your own design and customised features like buttons, text display, graph and slider etc. The T5L1 DWIN development software is a human-machine interface dedicated to ASIC designed by DWIN Technology for AIoT application applications. This software is based on a T5L chip that is a low-power, cost-effective dual-core 8051 processor. Key Features Based on self-designed T5L0, 262K Color 18-bit,800x480 Pixel IPS TFT LCD

The DMG80480T050_A5WTR - 5.0inch 800x480 Industrial IPS UART LCD Display Resistive Touch With Shell 16MB Flash is developed by DWIN. The NOR Flash memory in the display is available to store the user database.

The LCD is integrated with a running DGUS II system, a GUI (Graphical User Interface) development software. The pre-installed UI user interface development software can be used to develop your own design and customised features like buttons, text display, graph and slider etc. The T5L1 DWIN development software is a human-machine interface dedicated to ASIC designed by DWIN Technology for AIoT application applications. This software is based on a T5L chip that is a low-power, cost-effective dual-core 8051 processor.

This model is the intelligent LCD display module with resistive touch screen for user interactivity. It has onboard serial UART PORT which can be controlled by any microcontroller via a simple yet powerful command set. It can be used as TFT Display & Touch controller in various electronic equipment such as vending machines, currency counting machines, washing machine and many other similar appliances.

DWIN display is your best choice for the Human Machine Interface (HMI) projects. It provides a cost effective way to include interactive human machine interaction to your appliances and machines. With an ASIC designed specially for the HMI application, this modules provides best in class performance in terms of response time and longevity.

Based on T5L ASIC 3.5 Inches, 320xRGBx480, 16.7M Colors, IPS Screen, Resistive Touch ,Standard instruction set (TA) / DGUS system, Cost-Effective screen,

The DMG10600C101_03WTC - 10.1 Inch 1024x600 IPS TTL/RS232 HMI LCD Display Capacitive Touch 16MB Flash Buzzer SD interface is developed by DWIN. The NOR Flash memory in the display is available to store the user database.

The LCD is integrated with a running DGUS II system, a GUI (Graphical User Interface) development software. The pre-installed UI user interface development software can be used to develop your own design and customised features like buttons, text display, graph and slider etc. The T5L1 DWIN development software is a human-machine interface dedicated to ASIC designed by DWIN Technology for AIoT application applications. This software is based on a T5L chip that is a low-power, cost-effective dual-core 8051 processor. Key Features Capacitive touch screen

Based on T5L1, running DGUS II system, commercial grade.4.3-inch, 480*800 pixels resolution, 16.7M colors, IPS-TFT-LCD, wide viewing angle.Capacitive touch screen.Narrow border.

Based on T5L2, running DGUS II system, commercial grade.10.1-inch, 1024*600 pixels resolution, 16.7M colors, IPS-TFT-LCD, wide viewing angle.Capacitive touch screen.

Based on T5L0, running DGUS II system, industrial grade.5-inch, 800*480 Pixels resolution, 262K Colors, IPS-TFT-LCD, wide viewing angle.Resistive touch screen.Highlight 750nit.Anti-UV, with conformal coating.

Based on T5L1, running DGUS II system, commercial grade.5.0-inch, 480*854 Pixels resolution, 16.7M Colors, IPS-TFT-LCD, Wide viewing angle.Narrow border.

Common Structures of Smart LCM Capacitive touch screen Fixed iron frame LCD Driver board (with PE protective film) Shield (anti-interference for main chip) Fixed iron frame Fixed iron frame Incell screen Driver board (with PE protective film) Shield (anti-interference for main chip)

The DMG80480T050_A5WTR - 5.0inch 800x480 Industrial IPS UART LCD Display Resistive Touch With Shell 16MB Flash is developed by DWIN. The NOR Flash memory in the display is available to store the user database.

The LCD is integrated with a running DGUS II system, a GUI (Graphical User Interface) development software. The pre-installed UI user interface development software can be used to develop your own design and customised features like buttons, text display, graph and slider etc. The T5L1 DWIN development software is a human-machine interface dedicated to ASIC designed by DWIN Technology for AIoT application applications. This software is based on a T5L chip that is a low-power, cost-effective dual-core 8051 processor.

Hot sale and high performance 2.0 inch High standard TFT LCD Module LCM DGUS system Display with Touch Panel.The model DMG32240C020_03WTC is the intelligent capacitive touch screens/without touch with UART PORT which can be controlled by ANY MCU via Simple Powerful Command Set,so it can be used as TFT Display & Touch controller in various electronic equipment.The LCD display screen panel, touch LCD screen, DWIN display is your best choice for HMI project. Specification- Brand Name: DWIN Origin: CN(Origin) Model Number: DMG32240C020_03WTC is_customized: Yes Type: TFT Resolution:320*RGB*240 Touch panel: Capacitive touch panel Size: 2.0 inch Grade: Commercial Backlight: 270 nit User interface: 10Pin_1.0mm LCM interface???FPC40_0.5mm, RGB interface CTP interface???6Pin_0.5mm, IIC interface UART2: ON=TTL/CMOS; OFF=RS232 Based on T5L1, running DGUS II system, commercial grade. 2.0-inch, 320*240 Pixels resolution, 262K Colors, IPS-TFT-LCD, Wide viewing angle. Capacitive touch screen.

Based on T5L2, running DGUS II system, industrial grade.7.0-inch, 1024*600 pixels resolution, 16.7M Colors, IPS-TFT-LCD, wide viewing angle.Capacitive touch screen.With shell, with conformal coating

Based on T5L1, running DGUS II system, commercial grade.2.8-inch, 240*320 Pixels resolution, 262K Colors, TN-TFT-LCD, normal viewing angle.Resistive touch screen.

Hot sale and most welcomed * inch High standard TFT LCD Module HMI Display with Touch Panel The * model is the intelligent capacitive/resistive touch screens with UART PORT which can be controlled by ANY MCU via Simple Powerful Command Set, so it can be used as TFT Display & Touch controller in various electronic equipment. The lcd display screen panel, touch lcd screen, DWIN display is your best choice for HMI project.

Product Introduction: At Shenzhen Tianzhegda we can make TS8101ON, TFT LCD IPS Display as per your requirements. We are supplying 10.1 Inch IPS display for many years for EU and US market for big smart terminal to industrial automation. We can support you in OEM and ODM.

This model is hugely used in various sector from automobile to industrial, Smart Finance, POS Machine, Educations and Smart Home Appliance field. It is a very popular model for Car GPS navigation and display unit.

A:Our products are divided into two categories, small - medium size use knife card isolation packaging, large size screens are used in aircraft box packaging, all packages are protected by outer box and strapping to ensure the safety of material transportation.

We guarantee our products to be free from manufacturer defects. Liability under this warranty is limited to the replacing of any product found to be defective under normal use.

The products can be widely applied to the fields of HMI, handheld terminals, household medical products, instruments and apparatus, white goods, oiling machine, auto and AOI, etc.