50l3400u lcd panel supplier

Shop for Repair, Replacement Parts and Accessories for your Toshiba Model Number 50L3400U, including the main board, motherboard, power supply board, remote control, stand base, stand guide, stand screws, lcd/led display panel (screen replacement) and more.

​You"re on the right track to successfully repairing your Toshiba 50L3400U! Now that you"ve identified your model, we highly recommend matching the part number on the part(s) you"re replacing to ensure compatibility. ​If you don"t see your part listed below, please try searching by your part number or contact us for help!

There are various panel technologies. Each has its own specific features - viewing angles, color reproduction, response time, brightness/contrast, production cost, etc. The image quality depends directly on the type of the display panel used.Super MVA

The most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively.8 bits

Frame Rate Control (FRC) is a method, which allows the pixels to show more color tones. With quick cyclic switching between different color tones, an illusion for a new intermediate color tone is created. For example, by using FRC, a 6-bit display panel is able to show 16.7 millioin colors, which are typical for 8-bit display panels, and not the standard 262200 colors, instead. There are different FRC algorithms.No

The maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC.16777216 colors

The backlight is the source of light of the LCD display panels. The type of backlight determines the image quality and the color space of the display. There are various backlights such as CCFL, LED, WLED, RGB-LED, and etc.Edge LED

Integrated High Definition LED Television User’s Guide: 40L3400U 50L3400U If you need assistance: Toshiba’s Support Web site support.toshiba.com For more information, see “Troubleshooting” on page 121 in this guide. Owner’s Record The model number and serial number are on the back and side of your television. Print out this page and write these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this television. Model number: ___________________________________ Serial number: ___________________________________ Register your Toshiba television at register.toshiba.com Note: To display a High Definition picture, the TV must be receiving a High Definition signal (such as an over-the-air High Definition TV broadcast, a High Definition digital cable program, or a High Definition GMA300034012 digital satellite program). For details, contact your TV antenna installer, 12/14 cable provider, or satellite provider

CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS TOSHIBA CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury. TUNE IN TO SAFETY • ALWAYS follow the manufacturer’s recommendations for the safe installation of your television. • ALWAYS read and follow all instructions for proper use of your television. • NEVER allow children to climb on or play on the television or the furniture on which the television is placed. • NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers. • ALWAYS install the television where it cannot be pushed, pulled over or knocked down. • ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed. WALL OR CEILING MOUNT YOUR TELEVISION • ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television. • ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certification by an independent laboratory (such as UL, CSA, ETL). • ALWAYS follow all instructions supplied by the television and mount manufacturers. • ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder block construction. If you are unsure, contact a professional installer. • Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation. MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME • Many new television buyers move their older CRT televisions into a secondary room after the purchase of a flat-panel television. Special care should be made in the placement of older CRT televisions. • ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size and weight. • NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb. • ALWAYS make sure your older CRT television does not hang over the edge of your furniture. CE.org/safety

4 Important Safety Instructions toxic liquid. If the liquid comes in contact with your 1) Read these instructions. mouth or eyes, or your skin is cut by broken glass, 2) Keep these instructions. rinse the affected area thoroughly with water and 3) Heed all warnings. contact your doctor immediately. 4) Follow all instructions. • ALWAYS contact a service technician to inspect the TV any time it has been damaged or dropped. 5) Do not use this apparatus near water. 15) CAUTION: 6) Clean only with dry cloth. • To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or 7) Do not block any ventilation openings. Install in other outlet unless the blades can be inserted accordance with the manufacturer’s instructions. completely to prevent blade exposure. 8) Do not install near any heat sources such as • To prevent electric shock, match wide blade of plug radiators, heat registers, stoves, or other apparatus to wide slot; fully insert. (including amplifiers) that produce heat. 16) CAUTION: 9) Do not defeat the safety purpose of the polarized or • Do not let children swallow any small parts included grounding type plug. A polarized plug on or with the product or play with the plastic bag. has two blades with one wider than the Wide blade Keep the small parts and the plastic bag out of the other. A grounding type plug has two reach of children. blades and a third grounding prong. The wide blade or the third prong are 17)CAUTION: provided for your safety. If the provided • Do not let water or other liquids come into contact plug does not fit into your outlet, consult an electrician with the product, as it may result in damage. for replacement of the obsolete outlet. 18) WARNING: 10) Protect the power cord from being walked on or • To prevent the spread of fire, keep candles or other pinched, particularly at plugs, convenience open flames away from this product at all times. receptacles, and the point where they exit from the • Keep the product away from direct sunlight, fire or a apparatus. heat source such as a heater. This may reduce the product life time or result in fire. 11) Only use attachments/accessories specified by the manufacturer. Installation, Care, and Service 12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or Installation sold with the apparatus. When a cart is Follow these recommendations and precautions and used, use caution when moving the cart/ heed all warnings when installing your TV: apparatus combination to avoid injury from tip-over. 19) WARNING: Never expose the batteries to excessive heat such as sunshine, 13)Unplug this apparatus during lightning storms or fire, or the like. when unused for long periods of time. 20)ALWAYS plug the product into an outlet that is located 14)Refer all servicing to qualified service personnel. in such a manner that it can be easily unplugged in Servicing is required when the apparatus has been case the product requires service. damaged in any way, such as when power-supply cord or plug is damaged, liquid has been spilled or objects 21)NEVER route the product’s power cord inside a wall or similar enclosed area. have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, 22)Never modify this equipment. Changes or or has been dropped. modifications may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules of the Federal Communications Commission. Additional Safety Precautions 23) DANGER: RISK OF 14a) CAUTION: If the TV is dropped and the cabinet or SERIOUS PERSONAL enclosure surface has been damaged or the TV INJURY, DEATH, OR does not operate normally, take the following EQUIPMENT DAMAGE! precautions: Never place the TV on an unstable • ALWAYS turn off the TV and unplug the power cord cart, stand, or table. The TV may to avoid possible electric shock or fire. fall, causing serious personal injury, • NEVER allow your body to come in contact with any death, or serious damage to the TV. broken glass or liquid from the damaged television. The LCD panel inside the TV contains glass and a

5 24)When selecting a location for the TV, 32)Always operate this equipment from a 120V AC, 60 Hz • NEVER allow any part of the TV to hang over the power source. edge of the supporting furniture, • NEVER place the TV on tall furniture (for example, 33)Always make sure the antenna system is properly entertainment centers or bookcases) without grounded to provide adequate protection against anchoring both the furniture and the TV to a suitable voltage surges and built-up static charges (see Section support, 810 of the National Electric Code). • Never place cloth or other material between the TV and the supporting furniture. • NEVER allow children to climb on the TV 25)To avoid damage to this product, never place or store the TV in direct sunlight; hot, humid areas; or areas subject to excessive dust or vibration. 26)Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. Secure the TV using one of the following methods: (1) Secure the TV with a mounting screw (Recommended). • Place the TV on a sturdy surface that has a sufficient thickness and screw the unit on the surface securely 34) by using the mounting screw and the fall-prevention DANGER: RISK OF SERIOUS screw hole. PERSONAL INJURY OR DEATH! • If secured to furniture or other movable objects, the • When installing a rooftop antenna, use extreme care furniture must be secured to an immovable structure to make sure you are never in a position where your using the method shown in item 2 below. body (or any item you are in contact with, such as a (2) Secure the TV with a sturdy strap to a wall stud, ladder or screwdriver) can accidentally touch pillar, or other immovable structure. When connecting overhead power lines. Never locate the antenna the strap: near overhead power lines or other electrical circuits. - attach the strap to the TV using the hooks on the back • Never attempt to install any of the following during of the TV, the clips on the pedestal, or the hole in the lightning activity: a) an antenna system; or b) cables, base of the pedestal as available. wires, or any home theater component connected to - make sure the strap is tight, secure, and parallel to the an antenna or phone system. floor. Sturdy strap (as short as possible) Care Hook For better performance and safer operation of your 4" min. TOSHIBA TV, follow these recommendations and precautions: TV side TV top 35)If you use the TV in a room where the temperature is 27)The product shall not be exposed to dripping or 32° F (0° C) or below, the picture brightness may vary splashing, and that no objects filled with liquids, such until the LED warms up. This is not a sign of as vases, shall be placed on the apparatus. malfunction. 28)Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV: 36) WARNING: RISK OF SERIOUS • on a bed, sofa, rug, or similar surface; PERSONAL INJURY OR EQUIPMENT • too close to drapes, curtains, or walls; or DAMAGE! • in a confined space such as a bookcase, built-in • Never use chemicals (such as air fresheners, cabinet, or any other place with poor ventilation. cleaning agents, etc.) on or near the TV pedestal. Studies indicate that plastics may weaken and crack 29)Always leave a space of at least 4 (four) inches around over time from the combined effects of chemical the TV. The slots and openings are provided to protect agents and mechanical stress (such as the weight of the TV from overheating and to help maintain reliable the TV). Failure to follow these instructions could operation of the TV. result in serious injury and/or permanent damage to 30)Never allow anything to rest on or roll over the power TV and TV pedestal. cord, and never place the TV where the power cord is • Always unplug the TV before cleaning. Gently wipe subject to wear or abuse. the display panel surface (the TV screen) using a dry, soft cloth (cotton, flannel, etc.). A hard cloth may 31)Never overload wall outlets and extension cords. damage the surface of the panel. Avoid contact with alcohol, thinner, benzene, acidic or alkaline solvent cleaners, abrasive cleaners, or chemical cloths,

6 which may damage the surface. Never spray volatile • Upon completion of service, ask the service compounds such as insecticide on the cabinet. technician to perform routine safety checks to Such products may damage or discolor the cabinet. determine that the TV is in safe operating condition. 37)Never hit, press, or place anything on the back cover. These actions will damage internal parts. Choosing a location for your LED TV 38) To Display your LED TV on the included Pedestal Stand: WARNING: Observe the following safety precautions: RISK OF ELECTRIC SHOCK! Never spill liquids or push objects of any kind into 1) Read and follow the pedestal assembly instructions the TV cabinet slots. included with the pedestal. CAUTION: Before beginning pedestal assembly, 39)During a lightning storm, do not touch the connecting cables or product. carefully lay the front of the LCD Panel face down on a flat, cushioned surface such as a quilt or 40)For added protection of your TV from lightning and blanket. Leave the bottom of the unit protruding power surges, always unplug the power cord and over the edge of the surface and assemble the disconnect the antenna from the TV if you leave the TV pedestal as described in this instruction document. unattended or unused for long periods of time. Note: Extreme care should always be used when attaching the pedestal stand to avoid damage to 41)Always unplug the TV to completely disconnect from the LCD panel. mains power. When the TV is turned off using the on/ off switch, it is not completely disconnected from power 2) Place the TV on a sturdy, level surface that can and a minute amount of current is still consumed. support the weight of the TV. 3) Be sure to secure the TV to a wall, pillar, surface, or 42)During normal use, the TV may make occasional other immovable structure see item 26) on page 5 for snapping or popping sounds. This is normal, especially additional details. when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord To Display your LED TV using a Wall Bracket: and contact a Toshiba Authorized Service Provider. If you decide to wall mount your LED TV, always use a 43) wall bracket Listed by an independent laboratory (such WARNING: RISK OF SERIOUS as UL, CSA, ETL) that is appropriate for the size PERSONAL INJURY OR EQUIPMENT and weight of the TV: DAMAGE! 1) CAUTION: Two people are required for installation. Never strike the screen with a sharp or heavy object. 2) Unplug and remove any cables and/or other component connectors from the rear of the TV. 44) 3) Remove the screws of the VESA Mounting Pattern • The LCD screen of this product can be damaged by shown in the table below, if applicable. ultraviolet radiation from the sun. When selecting a CAUTION: Do not use the screws removed from location for the television, avoid locations where the the back cover to attach the wall mount bracket to screen may be exposed to direct sunlight, such as in the TV. front of a window. 4) Always use the screws supplied or recommended by • Never touch, press, or place anything on the LCD the wall mount manufacturer. screen. These actions will damage the LCD screen. 5) Follow the instructions provided with your wall bracket. If you need to clean the LCD screen, follow the Before proceeding, make sure the appropriate instructions in item 35) on page 5. bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the Service wall bracket. 6) After attaching the appropriate bracket(s) to the wall 45) and the back of the TV, remove the pedestal stand WARNING: from the TV, as described in this instruction document. 7) VESA Mounting Pattern RISK OF ELECTRIC SHOCK! TV Size Hole Pattern (HxV) Screw Size Never attempt to service the TV yourself. Opening and removing the covers may expose you to 40” 200mm x 200mm M6 dangerous voltage or other hazards. Failure to follow this WARNING may result in death or 50” 400mm x 200mm M8 serious injury. Refer all servicing not specified in this manual to a Toshiba Authorized Service Provider. 46)If you have the TV serviced: • Ask the service technician to use only replacement parts specified by the manufacturer.

7 Removing the Pedestal Stand 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave FCC Declaration of Conformity the stand protruding over the edge of the surface. Compliance Statement (Part 15): Note: Extreme care should always be used when Toshiba 40L3400U and 50L3400U Television removing the pedestal stand to avoid damage to models comply with Part 15 of the FCC Rules. the LCD panel. Operation is subject to the following two conditions: 2) Remove the stand screws shown in the diagram below.This will allow removal of the pedestal stand. (1) This device may not cause harmful interference, and 3) Once you have removed the screws holding the (2) This device must accept any interference received, pedestal stand in place, remove the pedestal stand including interference that may cause undesired operation. from the TV. The party responsible for compliance to these rules is: Toshiba America Information Systems, Inc. L3400U Series 9740 Irvine Blvd., Irvine, CA 92618. Ph: 800-631-3811 40” TV. VESA Mounting Pattern Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, Hook Sturdy strap which can be determined by removing and applying Two stand screws power to the equipment, the user is encouraged to try (as short as possible) to correct the interference by one of the following (Sample Illustration) measures: • Reorient or relocate the receiving antenna. 50” TV. VESA Mounting Pattern • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications to this equipment not expressly approved by Toshiba could void the user’s authority to operate this equipment. Wireless Radio For product available in the USA/Canada market, only Hook Sturdy strap channel 1-11 can be operated. Selection of other channels is Two stand screws not possible. The device could automatically discontinue (as short as possible) transmission in case of absence of information to transmit, (Sample Illustration) or operational failure. Note that this is not intended to CAUTION: Always place the TV on the floor or a prohibit transmission of control or signaling information or sturdy, level, stable surface that can support the the use of repetitive codes where required by the technology. weight of the unit. To secure the TV, use a sturdy strap If this device is going to be operated in 5.15-5.25GHz from the hook(s) on the rear of the TV to a wall stud, frequency range, then it is restricted to an indoor environment only. pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor. Important: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

8 FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This ENERGY STAR® User Information equipment should be installed and operated with minimum ENERGY STAR User Information Statement: the factory distance 20cm between the radiator & your body. default settings of this television meet ENERGY STAR® requirements. Changing Picture Settings may increase energy consumption, possibly beyond the limits required for ENERGY STAR qualification. To ensure your television is operating at optimal energy efficiency, select [Home] mode during initial activation. To return to [Home] mode settings, select the [Installation] icon from the menu, select [Store / Home Mode], then select [Home]. This places the TV in [Standard] mode. [Standard] mode is recommended for normal home use. ENERGY STAR® qualified TV. Products that earn the ENERGY STAR prevent green house gas emissions by meeting strict guidelines set by the U.S. Environmental Protection Agency. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Important notes about your TV The following symptoms are technical limitations of LCD Display technology and are not an indication of malfunction; therefore, Toshiba is not responsible for perceived issues resulting from these symptoms. 1) An afterimage (ghost) may appear on the screen if a fixed, non-moving image appears for a long period of time. The afterimage is not permanent and will disappear in a short period of time. 2) The LCD panel contained in this TV is manufactured using an extremely high level of precision technology; however, there may be an occasional pixel (dot of light) that does not operate properly (does not light, remains constantly lit, etc.). This is a structural property of LCD technology, is not a sign of malfunction, and is not covered under your warranty. Such pixels are not visible when the picture is viewed from a normal viewing distance. Note: Interactive video games that involve shooting a “gun” type of joystick at an on-screen target may not work with this TV. WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

Contents Chapter 1: Introduction.............................................................. 17 Features...................................................................18 Overview of installation, setup, and use....................20 TV front and side panel controls and connections.....21 TV back panel connections.......................................22 Chapter 2: Connecting Your TV.................................................. 24 Overview of cable types............................................24 Coaxial (F-type) cable ........................................24 Standard A/V cables (red/white/yellow)..............25 Component video cables (red/green/blue)..........25 HDMI® cable (with HDMI Logo)..........................25 Optical audio cable.............................................26 LAN cable...........................................................26 About the connection illustrations......................26 Connecting a VCR, antenna, cable TV, or camcorder.26 Connecting a Blu-ray™ / DVD player, satellite receiver with ColorStream™ or VCR . ..................28 Connecting an HDMI® or DVI device to the HDMI® input.......................................................29 10

Contents 13 Sound Mode.......................................................73 Stable Sound™...................................................73 Using the Dolby® Digital Dynamic Range Control feature ............................................74 Selecting the PIN code.............................................74 Enter a new PIN code..........................................74 Forgotten PIN code............................................74 Changing or deleting your PIN code...................75 Using parental controls (for USA region)..................75 Blocking TV programs and movies by rating (V-Chip).............................................75 Downloading an additional rating system...........76 Displaying ratings..............................................79 Unlocking programs temporarily........................79 Using the input lock feature......................................80 Locking channels.....................................................80 Using the GameTimerTM. ....................................81 Using the panel lock feature................................82 MediaShare (Videos, Music, and Photos).................83 Auto Start function.............................................85 To open the MediaShare.....................................85 Viewing photo files.............................................86 Playing music files.............................................88 Viewing photo files and playing music files at the same time ..........................................89 Playing video files . ............................................89 During playback you can do the following:................90 To set the repeat mode:............................................90 DivX®.......................................................................91 To register your TV to a DivX® account:..............91 To unregister your device:..................................91 To playback DivX HD content:.............................92 Setting the sleep timer..............................................92 No Signal Power Down.............................................93 Using HDMI® CEC....................................................93

20 Introduction Overview of installation, setup, and use Overview of installation, setup, and use Follow these steps to set up your TV and begin using its many exciting features. 1 Carefully read the important safety, installation, care, and service information. Keep this document for future reference. 2 To choose a location for the TV: v Read “Important notes about your TV” on page 8. v Place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. Secure the TV to a wall, pillar, or other immovable structure, see 26) on page 5. v Place the TV in a location where light does not reflect on the screen. v Always leave a space of at least 4 (four) inches around the TV. The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV. 3 Do not plug in any power cords until after you have connected all cables and devices to your TV. 4 Before connecting cables or devices to the TV, learn the functions of the TV’s connections and controls, see “Advanced Network Setup” on page 111. 5 Connect your other electronic device(s) to the TV, see “DNR (Dynamic Noise Reduction)” on page 103. 6 Install the batteries in the remote control, see “Installing batteries” on page 39. 7 See “Using the Remote Control” on page 39 for an overview of the buttons on the remote control. 8 After connecting all cables and devices, plug in the power cords for your TV and other devices. Then press the POWER button on the TV control panel or remote control to turn on the TV. If the TV stops responding to the buttons on the remote control or TV control panel and you cannot turn the TV off or on, unplug the power cords for a few seconds and then plug them in and try again. 9 See “Navigating the menu system” on page 46 for a quick overview of navigating the TV’s menu system. 10 Program channels into the TV’s channel memory, see “Auto Tuning” on page 49.

Introduction TV front and side panel controls and connections 21 11 For details on using the TV’s features, see Chapter 6 and Chapter 7. 12 For help, refer to “Troubleshooting” on page 121. 13 For technical specifications, see “Specifications” on page 130. 14 For the End User License Agreement, see “License Agreement” on page 135. TV front and side panel controls and connections Left side panel TV front 3 TV top 4 5 6 2 1 (Sample Illustration) 40/50L3400U - Front and side panel controls and connection 1 Power On/Standby LED—Power indicator light, (glows red when the TV power is Off). 2 Remote sensor (embedded)—Point the remote control toward this remote sensor. 3 USB port—Used to access video, music, or photo files with USB device. 4 POWER—Turns the TV On/Off. 5 / /+/ ─ —Adjusts the volume level, changes the channel, or changes the input or source you are viewing, depending on the mode, which is selected by the CH/INPUT button. 6 CH/INPUT—Switches the function of the / /+/─ buttons to select the volume, channel, or input mode. • In Volume mode, the buttons increase or decrease the volume. • In Channel mode, the buttons change the channel up or down. • In Source mode, the buttons toggle the input from one source to the next.

22 Introduction TV back panel connections TV back panel connections For explanations of cable types and connections, see page 102. 4 3 7 Power Cord 2 5 6 1 7 Power Cord (Sample Illustration) 40/50L3400U - Back panel connections 1 ANT/CABLE—Antenna input that supports analog (NTSC) and digital (ATSC) off-air antenna signals and analog and digital cable TV (QAM) signals. 2 ColorStreamTM HD/ Video IN—High-resolution component video input and shared composite video input, see “DynaLightTM” on page 102. 3 HDMI® IN—High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an HDMI® device or uncompressed digital video from a DVI device. HDMI® connection is necessary to receive 1080p signals. 4 Digital Audio out— Optical audio output in Dolby® Digital or PCM (pulse-code modulation) format for connecting an external Dolby® Digital decoder, amplifier, or home theater system with optical audio input. 5 LAN IN—Connects the TV to your home network. 6 Two HDMI® IN—High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an HDMI® device or uncompressed digital video from a DVI device. HDMI® connection is necessary to receive 1080p signals. 7 Power Cord— Plug one end of the power cord into the jack on the back of the unit, and the other end into a live electrical outlet.

Introduction TV back panel connections 23 The included power cord is for use with this unit only. Do not use it with other equipment. If you are not going to use the unit for an extended period of time, disconnect the power cord from the wall outlet. Whenever the power cord is plugged into the wall outlet, it will draw some power, even when the unit is off. Component/Standard (composite) video cables carry only video information; separate audio cables are required for a complete connection.

26 Connecting Your TV Connecting a VCR, antenna, cable TV, or camcorder Optical audio cable (Sample Illustration) Optical audio cable Optical audio cable connect receivers with Dolby® Digital or PCM (pulse-code modulation) optical audio input to the TV’s Digital Audio Out terminal, see “Connecting a digital audio system” on page 30. LAN cable (Sample Illustration) LAN cable Standard LAN cable connects the TV to your home network, see “Connecting the TV to a home network with an Internet connection - wired” on page 37. Crossover LAN cable connects the TV directly to a computer, see “Connecting the TV directly to a computer without an Internet connection” on page 35. About the connection illustrations You can connect different types and brands of devices to your TV in several different configurations. The connection illustrations in this manual are representative of typical device connections only. The input/output terminals on your devices may differ from those illustrated herein. For details on connecting and using your specific devices, refer to each device’s User’s Guide. Connecting a VCR, antenna, cable TV, or camcorder Camcorder TV back panel From cable TV From cable TV or antenna Cable box AUDIO VIDEO OUT L IN CH 3 CH 4 OUT R Stereo VCR VIDEO AUDIO L R IN IN from CH 3 ANT CH 4 OUT OUT to L R TV (Sample Illustration) 40/50L3400U—Connecting to a VCR, antenna, or cable TV, or camcorder

28 Connecting Your TV Connecting a Blu-ray™ / DVD player, satellite receiver with ColorStream™ or VCR Connecting a Blu-ray™ / DVD player, satellite receiver with ColorStream™ or VCR TV back panel From antenna Stereo VCR VIDEO AUDIO L R IN IN from ANT CH 3 CH 4 OUT OUT to TV L R From satellite dish AUDIO OUT Y PB PR L Satellite COMPONENT VIDEO S-VIDEO VIDEO R IN OUT OUT Satellite receiver, Blu-rayTM or DVD player (Sample Illustration) 40/50L3400U—Connecting a Blu-ray™ / DVD player or Satellite receiver with ColorstreamTM (or VCR). ColorStreamTM and composite video cables cannot be connected simultaneously. Items needed: v Coaxial cables v Standard AV cables If you have a mono VCR, connect L/MONO on the TV to your VCR’s audio out terminal using the white audio cable only. v Standard audio cables v Component video cables v You can connect the component video cables (plus audio cables) from the DVD player or satellite receiver to the COLOR STREAM HD terminal in the TV. The COLOR STREAM HD terminal can be used to display Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. Please note that 1080p is not supported. Check the User’s Guide of the DVD player in order to determine the best output signal available. v If your DVD player or satellite receiver does not have component video, connect a standard A/V cable to the AUDIO/VIDEO terminal. If your DVD player has HDMI® video, see “Connecting an HDMI® or DVI device to the HDMI® input” on page 29.

30 Connecting Your TV Connecting an HDMI® or DVI device to the HDMI® input To connect a computer to the HDMI® input, see “Connection to the TV’s HDMI® terminal” on page 34. To connect an HDMI® device, you will need one HDMI® cable (type A connector) per HDMI® device. v For proper operation, it is recommended that you use an HDMI® cable with the HDMI® Logo( ). v HDMI® cables transfer both video and audio. Separate analog audio cables are not required (see illustration). TV back panel HDMI® device (Sample Illustration) 40/50L3400U—HDMI® connections To view the HDMI® device video: Select HDMI 1, HDMI 2 or HDMI 3 video input source on the TV. (Press the INPUT button on the remote control. For more information, see “Selecting the video input source” on page 54). To connect a DVI device, you will need: v HDMI® to DVI adapter cable For proper operation, the length of an HDMI® to DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).

31 Connecting Your TV HDMI® CEC connection TV back panel VIDEO AUDIO DVI/HDCP L R OUT IN IN OUT L R (Sample Illustration) 40/50L3400U—DVI connections To ensure that the HDMI® or DVI device is reset properly: v When turning on your electronic components, turn on the TV first, and then the HDMI® or DVI device. v When turning off your electronic components, turn off the HDMI® or DVI device first, and then the TV. EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high- definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV. HDMI® CEC connection You can control the basic functions of connected audio/video devices using the TV’s remote control if you connect a HDMI® CEC compatible audio receiver or playback device. The HDMI® CEC Control feature uses CEC technology as regulated by the HDMI® standard.

32 Connecting Your TV HDMI® CEC connection Back panel Playback device (HDMI ® Audio Receiver CEC DVD Player, etc.) Playback device (HDMI ® CEC DVD Player, etc.) (Sample Illustration) 40/50L3400U—HDMI® CEC compatible audio receiver and playback device connections To connect an HDMI® device, you will need one HDMI® cable (type A connector) per HDMI® device (see “Overview of cable types” on page 24). v If several devices are connected, HDMI® CEC Control feature may not operate properly. v For proper operation, it is recommended that you use an HDMI® cable with the HDMI® Logo ( ). Before controlling the device(s): v After completing the above connections, configure the HDMI® CEC Setup menu with the desired settings, see “Setting up HDMI® CEC” on page 96. v The connected devices must also be configured. For details, see the operation manual for each device. v This feature uses the CEC technology as regulated by the HDMI® standard. v This feature is limited to models incorporating Toshiba’s HDMI® CEC. However, Toshiba is not liable for those operations. Refer to the individual instruction manuals for compatibility information. This feature may not work properly depending on the devices that are connected.

Connecting Your TV 33 Connecting a digital audio system Connecting a digital audio system The TV’s Digital Audio Out terminal outputs a Dolby® Digital, 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby® Digital decoder or other external audio system with optical audio input. You will need an optical audio cable (Use an optical audio cable that has the larger “TosLink™” connector and not the smaller “mini- optical” connector.) TV back panel Digital decoder or other digital audio system (Sample Illustration) 40/50L3400U—Connecting a digital audio system Some audio systems may not be compatible with Dolby® Digital, or bitstream signal. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY. The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions. v The Dolby® Digital format is available in the following situations: - When tuned to a digital RF channel - When an HDMI® input is used - When network devices are used

34 Connecting Your TV Connecting a computer To control the audio: 1 Turn on the TV and the digital audio device. 2 Press the MENU button on the remote control and open the Sound menu. 3 Select Sound > Digital Audio Output > Audio Format and then press the OK button. 4 Press the ▲/▼ (arrow) buttons to select either Auto or PCM, depending on your device. Connecting a computer With HDMI® connection, you can view your computer’s display on the TV and hear the sound from the TV’s speakers. Connection to the TV’s HDMI® terminal When connecting a computer with a DVI terminal, use an HDMI®- to-DVI adapter cable. When connecting a computer with an HDMI® terminal, use an HDMI® cable (type A connector). Separate analog audio cables may not be necessary, depending on computer hardware and setup, see “Connecting an HDMI® or DVI device to the HDMI® input” on page 29. TV back panel Computer (Sample Illustration) 40/50L3400U Series - Connecting a computer to the TV through the HDMI® terminal.

35 Connecting Your TV Connecting to a home network v The edges of the picture may be hidden. v If receiving a 480i (HDMI®), 480p (HDMI®), 720p, 1080i, or 1080p signal program, Native ModeTM scales the video to display the entire picture within the borders of the screen (i.e. no overscan). Connecting to a home network The LAN port allows your Toshiba TV to connect to your home network. You can use this home network to access photos, movies, and music files that are stored on a connected Media Server and play them on your TV. Connecting the TV directly to a computer without an Internet connection You will need a Crossover LAN cable. TV back panel Computer (Sample Illustration) 40/50L3400U Series - Connecting a computer without Internet connection.

36 Connecting Your TV Connecting to a home network Connecting the TV to a home network without an Internet connection Items needed: v Standard LAN cables v Router with a hub Router with a hub Computer TV back panel Computer (Sample Illustration) 40/50L3400U Series - Connecting a network without Internet connection

Connecting Your TV Connecting to a home network 37 Connecting the TV to a home network with an Internet connection - wired Items needed: v Coaxial or telephone cable (depending on your modem type) v Standard LAN cables v Router with Hub v Modem (DSL or cable) Modem (DSL or cable) Router with a hub 1 2, 3 2 TV back panel Cable or Phone jack Computer 2 (Sample Illustration) 40/50L3400U Series - Connecting with Internet connection - wired Item: Description: Coaxial or telephone cable (depending on your modem 1 type) 2 Standard LAN cable Do NOT connect a phone jack directly to the TV’s LAN 3 port.

38 Connecting Your TV Connecting to a home network Connecting the TV to a home network with an Internet connection - wireless Items needed: v Coaxial or telephone cable (depending on your modem type) v Standard LAN cables v Wireless LAN access point or wireless router v Modem (DSL or cable) Modem (DSL or cable) Wireless LAN access point 1 Built-in WLAN system: It is not nessesary to connect an external WLAN adaptor to the TV 2 Cable or Phone jack Computer 2 (Sample Illustration) 40/50L3400U Series - Connecting with Internet connection - wireless Item: Description: Coaxial or telephone cable (depending on your modem 1 type) 2 Standard LAN cable The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The actual transmission speed will be lower than the theoretical maximum speed. The Built-in WLAN Adapter is based on the IEEE 802.11n specification and may not be fully compatible with, or support some features (e.g., security) of certain Wi-Fi equipment that are based on the draft version of IEEE 802.11n.

40 Using the Remote Control Remote control effective range v Be sure to use AAA size batteries. v Dispose of batteries in a designated disposal area. v Always consider the environment when disposing of batteries. v Always follow applicable laws and regulations. v If the remote does not operate correctly, or if the operating range is reduced, replace the batteries. v Always replace both batteries with new ones. Never mix battery types or use new and used batteries together. v Always remove batteries from the remote if they are dead or if the remote control is not to be used for an extended period of time. This prevents battery acid from leaking into the battery compartment. Remote control effective range For optimum performance, aim the remote control directly at the TV and make sure there is no obstruction between the remote control and the TV. 16.4 ft (5m) (Sample Illustration) 40/50L3400U-Remote control effective range

Menu Layout and Navigation Main menu layout 45 Icon Item Option Sound Balance Adjusts Balance Bass Adjusts Bass Treble Adjusts Treble DTS TruSurround On / Off Sound Mode Standard/Music/Movie/Clear Voice Stable Sound On / Off Dynamic Range Control On / Off TV Speakers On/Off MTS Stereo / Mono / SAP Digital Audio Selection Offers different audio choices for digital channels Primary Audio Language Primary audio choice for digital channels Digital Audio Output Opens the Digital Audio Output menu Options Channel Options Opens Channel Options menu Closed Captions Opens Closed Captions menu MediaShare Setup Opens MediaShare Setup menu HDMI CEC Control Opens HDMI CEC Control Setup menu Setup HDMI CEC Player Opens HDMI CEC Player Control menu Control Input Options Opens Input Options menu Power Management Opens Power Management menu Panel Lock On / Off HDMI Information Display On / Off Parental PIN Setup Opens Parental PIN Setup menu Parental Control and Locks Opens Parental Control and Locks menu Installation Menu Language English / Français / Español Time Zone Eastern / Newfoundland / Atlantic / Hawaii / Alaska / Pacific / Mountain / Central Daylight Saving Time On / Off Store / Home Mode Home / Store Channel Tuning Opens Channel Tuning menu Quick Setup Executes Quick Setup Reset TV Resets to Factory Defaults Network Network Setup Opens Network Setup menu Smart Apps Setup Opens Smart Apps Setup menu Timers Sleep Timer 10-minute increments, from 0 min to a maximum of 12 hours Game Timer Off/30 min/60 min/90 min/120 min

Storing channels in memory Tuning 49 Setting up your TV Auto (optional) 3 Open the Channel Tuning menu, highlight ANT/CABLE In, and then press the OK button. Network (Sample Image) Channel tuning menu - Input configuration selection 4 Press the ▲/▼(arrow) buttons to select the input source (Cable or Antenna), and then press the OK button to save your new settings. Storing channels in memory (optional) To make sure your TV stops only on the channels you want when you press the ▲/▼(arrow) buttons on the remote control or the control panel, store those channels in the TV’s memory. Auto Tuning You can set up the TV to detect all active channels in your area and store them in its memory. Then you can manually add or erase individual channels from memory. v You must set up the ANT/CABLE input source before programming channels. See “ANT/CABLE IN” on page 48. v The automatic channel programming process will erase channels that were previously programmed into the TV’s memory. v To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote control. v Programming channels when the ANT/CABLE input is configured for Cable will take substantially longer than when the antenna input is configured for Antenna. This is normal; however, once channel programming is finished, you should not have to repeat the programming process again unless your Cable TV service lineup changes significantly.

Chapter 6 Setting up your TV Selecting the video input source To select the video input source to view: 1 Press the INPUT button on the remote control or TV control panel. 2 Do one of the following: v Press 0-4. v Repeatedly press the ▲/▼(arrow) buttons on the remote control, and then press the OK button to change the input setting. v Repeatedly press the INPUT button to cycle through all the inputs. Stop pressing the INPUT button when the desired input is selected. ColorStream HD / Video HDMI 1 HDMI 2 HDMI 3 (Sample Image) Input Selection screen 54

58 Setting up your TV Tuning to the next programmed channel Tuning to the next programmed channel To tune to the next programmed channel, press the CH ▲/▼ (arrow) buttons on the remote control or TV control panel. This feature will not function until you have programmed channels into the TV’s channel memory, see “Storing channels in memory (optional)” on page 49. Tuning to a specific channel (programmed or unprogrammed) To tune analog channels: Press the Channel Number (0–9) on the remote control. For example, to select channel 125, press 1, 2, 5, and then press the OK button. Tuning digital channels: Press the Channel Number (0–9) on the remote control, followed by the (Dash 100) button, and then the sub-channel number. For example, to select digital channel 125-1, press 1, 2, 5, –, 1, and then press the OK button. If a digital channel is not programmed, either through the automatic channel scan or the Channel add function, see “Auto Tuning” on page 49, you will have to tune the RF channel using the Channel Numbers and the (Dash 100) button on the remote control. Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. 1 Select the first channel you want to view. 2 Select a second channel using the Channel Number buttons (and the (Dash 100) button if selecting a digital channel). 3 Press the CH RTN button on the remote control. The previous channel will display. Each time you press the CH RTN button, the TV will switch back and forth between the last two channels that were tuned.

82 Setting up your TV Locking channels Using the panel lock feature You can lock the control panel to prevent your settings from being changed accidentally (by children, for example). When Panel Lock is set to On, none of the controls on the control panel operate except the POWER button. To lock the control panel: 1 In the Options menu, highlight Panel Lock, and then press the OK button. 2 Enter your four-digit PIN code. 3 Press the ▼(arrow) button to select On. When the control panel is locked and any button on the control panel (except the POWER button) is pressed, the message “NOT AVAILABLE” appears. Network (Sample Illustration) Locks menu - Panel Lock selection To unlock the control panel, select Off in Step 3 in this section or press and hold the VOLUME (–) button on the TV control panel for approximately 15 seconds until the volume icon appears.

Usinga the When using advanced Wireless picture network 105 Using the TV’s Advanced Features settings connection When using a Wireless network connection Wireless LAN and your Health: Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. However, the level of energy emitted by Wireless LAN devices is much less than the electromagnetic energy emitted by wireless devices like mobile phones. Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, Toshiba believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization. Such restrictions may apply in environments where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies to the use of wireless devices in a specific organization or environment, you are encouraged to ask for authorization to use the Wireless LAN device prior to turning on the equipment. Using the TV in a wireless LAN environment: v It is recommended to use IEEE 802.11a or IEEE 802.11n on 5 GHz for audio and SD video streaming. v It is recommended to use IEEE 802.11n on 5 GHz for HD video streaming. v It is recommended that the encoding rate of video content be 20 Mbps or less. v It is not recommended to use 2.4 GHz for audio and video streaming. v Content playback may be interrupted by surrounding interference.

Chapter 8 Troubleshooting General troubleshooting Before calling a service technician, review this chapter or visit the Toshiba technical support Web site at support.toshiba.com for possible causes/solutions for the problem you are experiencing. Before you begin to troubleshoot any problem, first unplug the TV from the AC wall outlet, wait approximately one minute, and then plug the TV back into the AC wall outlet. If the problem still exists attempt to troubleshoot the problem. Black box on-screen. The closed caption feature is set to one of the Text modes (T1, T2, T3, or T4). Set the closed caption feature to Off, see “Using closed captions” on page 68. TV stops responding to controls. If the TV stops responding to the buttons on the remote control or TV control panel and you cannot turn off the TV, unplug the TV from the AC wall outlet and plug it back in. If you cause a static discharge when touching the TV and the TV fails to function, simply unplug the TV from the AC outlet and plug it back in. The TV should return to normal operation. Other problems. If your TV’s problem is not addressed in this Troubleshooting section or the recommended solution has not worked, use the Reset Factory Defaults procedure, see “Resetting Factory Defaults” on page 53. 121

122 Troubleshooting Picture problems Onscreen Demo Pop-up If your TV is displaying a Demo pop-up screen, reset the Store / Home mode setting to Home. For more information see “Installation setup selection” on page 48. TV will not turn on. Ensure the power cord is plugged in properly, and then press the POWER button. Ensure the TV is plugged into a working AC power outlet by plugging another device into the AC power outlet to verify the AC power outlet is working. Replace the batteries in the remote control, see “Installing batteries” on page 39. Try the control panel buttons on the TV. Picture problems General picture problems. Check the antenna/cable connections, see “Connecting Your TV” on page 24. Press the INPUT button on the remote control or on the TV and select a valid video input source, see “Selecting the video input source” on page 54. If no device is connected to an input on the TV, no picture appears when you select that particular input source. For device connection details, see “Connecting Your TV” on page 24. Antenna reception may be poor. Use a highly directional outdoor antenna (if applicable). The station may be having broadcast difficulties. Try another channel. Adjust the picture quality, see “Using the advanced picture settings” on page 100. Picture size changes by itself or when the TV is turned OFF and back ON. Turn the Auto Aspect feature of the TV to OFF. see “Using the advanced picture settings” on page 100. Cannot select external video sources. If you cannot view signals from external devices connected to VIDEO, ColorStreamTM HD, HDMI 1, HDMI 2, or HDMI 3, ensure that the Input Lock is set to Off, see “Using the input lock feature” on page 80.

131 Specifications Power source Power source 120V AC, 60 Hz Power maximum current 40L3400U 1.1 A 50L3400U 1.4 A Power consumption 40L3400U 0.3 W in Standby mode 50L3400U 0.3 W in Standby mode Audio power 40L3400U 6 7W 50L3400U 6 7W Speaker type 40L3400U Two 5.98 x 1.57 x 1.42” 50L3400U Two 5.98 x 1.57 x 1.42” Video/audio terminals Video/audio input Video 1 V (p-p), 75 ohm, negative sync. Audio 200 mV(rms) (-20dBFS, 47K ohm or greater) ColorStreamTM (component video) HD input Video Y: 1V(p-p), 75 ohm PR: 0.7 V(p-p), 75 ohm PB: 0.7 V(p-p), 75 ohm Suggested formats: 1080i, 720p, 480p, 480i Audio 200 mV(rms) (-20dBFS, 47K ohm or greater)

132 Specifications Digital audio output HDMI®input HDMI® compliant (type A connector) HDCP compliant 2-channel Linear-PCM/ Dolby® Digital; 32/44.1/48kHz sampling frequency; 16/20/24 bits per sample HDMI® Audio Digital audio output Optical type Wireless connection Standard IEEE 802.11a/b/g/n/ Host Interface USB 2.0 compatible Frequency Range 5.15-5.35 GHz, 5.47-5.725 GHz, 5.725-5.850 GHz, 2.400–2.473 GHz Security WEP 64/128, TKIP, AES, WPA/WPA2-PSK, WPS, None Ethernet IEEE 802.3. USB Universal Serial Bus Specification, Revison 1.1. Universal Serial Bus Specification, Revison 2.0. Dimensions (with stand) Width 36.5” (928 mm) 40L3400U Height 23.1” (588 mm) Depth 7.6” (194 mm) Width 44.2” (1122 mm) 50L3400U Height 27.6” (702 mm) Depth 8.5” (217 mm)

133 Specifications Supplied accessories Weight (mass) 40L3400U 20.9 lbs (9.5 kg) 50L3400U 35.1 lbs (15.9 kg) Operating conditions Temperature 32ºF - 95ºF (0ºC - 35ºC) Humidity 20 - 80 % (no moisture condensation) Supplied accessories v Remote control with two size “AAA” batteries v Resource Guide v Quick Start Guide v Pedestal and hardware v Warranty information v Power cord (available on certain models)

Index 141 Pre-Installed Software - EULA TheaterWide 1 61 Exhibit A 134 TheaterWide 2 61 Locks menu TheaterWide 3 62 setting pin code 74 pin code changing 75 M deleting 75 MediaShare 83 entering PIN code 74 Menu Layout and Navigation forgotten 74 Main menu layout Power maximum current Navigating the menu system Power consumption 44 Audio power Speaker type 130 N program ratings displaying 79 Native unlocking programs 79 4:3 Normal Q Dot by Dot 60, 62 No HDMI® CEC operation Quick setup HDMI® problems ANT/CABLE IN 48 Media Player problems R If the problem persists after trying the solutions 124 Remote control problems Channel tuning problems O Closed caption problems Other HDMI® CEC functions Rating blocking (V-Chip) problems Setting up HDMI® CEC 123 Using the HDMI® settings Resetting Factory Defaults 53 feature S HDMI® 1(or 2) RGB Range 96 safety P icons 17 Panel Lock 82 Safety Precautions parental controls WARNING using 75 CHILD SAFETY picture Important Safety Instructions 2, 4 adjusting quality 67 Samba TV™ 119 picture size Scrolling the TheaterWide™ picture 4 (TheaterWide 2 and 3 only) 3 63 Using the Auto Aspect feature Normal 63

142 Index Using the 4:3 Stretch ENERGY STAR® User Using the FREEZE feature 64 Information Setting channel skip Important notes about your TV 6 Setting the AV input mode Trademark Information Setting the time zone Copyright Viewing the system status 51 Notice 9 Setting the sleep timer Troubleshooting No Signal Power Down General troubleshooting Using HDMI® CEC Picture problems HDMI® CEC playback device (Blu- Sound problems 120 ray™/DVD player, etc.) control Tuning to a specific channel (programmed 91 or unprogrammed) Setting up your TV Switching between two channels Initial Setup using Channel Return Installation setup selection Switching between two Menu language 47 channels using SurfLock™ Slide show Selecting the picture size 58 Playing music files TV front and side panel controls and Viewing photo files and playing connections music files at the same time TV back panel connections 21 Sorting photo or music files 86, 87 TV panel controls Sound Mode left side 21 Stable Sound™ TV remote Using the Dolby® Digital functionality 41 Dynamic Range Control feature Selecting the PIN code 73 U Specifications Unlocking programs temporarily Television system Using the input lock feature Channel coverage Locking channels Power source 129 Using the GameTimer™ 79 T Using the Digital Audio Selection Selecting stereo/SAP broadcasts timer Adjusting the audio quality sleep timer 92 DTS TruSurround™ 71 time zone Using the panel lock feature setting 52 Using the Media Player To Display your LED TV using a Wall Using Media Player with a USB Bracket device FCC Declaration of Conformity Auto Start function 82 Compliance Statement (Part 15) Using the Remote Control