graphic lcd module cog brands

FSTN, Transflective (positive), 6:00 view, Operating Temp: -20C to +70C, Storage Temp: -30C to +80C, 1/64 Duty, 1/9 Bias, 3.0V LCD, 3.2V LED, RGB LED Backlight.

FSTN (Film-compensated Super-twisted Nematic) provides a sharper contrast than STN by adding a film. The cost is approximately 5% higher than STN. FSTN works great for indoor and outdoor applications and is mainly used in graphic displays and higher end products. The Transflective polarizer is a mixture of Reflective and Transmissive. It provides the ability to read the LCD with or without the backlight on. It will work for all lighting conditions from dark with backlight to direct sunlight which makes it the most common choice. There is no cost difference between Transflective, Transmissive and Reflective.

Focus LCDs can provide many accessories to go with your display. If you would like to source a connector, cable, test jig or other accessory preassembled to your LCD (or just included in the package), our team will make sure you get the items you need.Get in touch with a team member today to accessorize your display!

Focus Display Solutions (aka: Focus LCDs) offers the original purchaser who has purchased a product from the FocusLCDs.com a limited warranty that the product (including accessories in the product"s package) will be free from defects in material or workmanship.

128x64 Dot Matrix COG, FSTN, Yellow background, Yellow/Green backlight, Bottom (or 6:00) viewing angle, Transflective (positive), with cable, RoHS Compliant. This dot matrix display has a wide temperature range: -20° Celcius to +70° Celcius which equates to (-4° Fahrenheit to +158° Fahrenheit).

FSTN (Film-compensated Super-twisted Nematic) provides a sharper contrast than STN by adding a film. The cost is approximately 5% higher than STN. FSTN works great for indoor and outdoor applications and is mainly used in graphic displays and higher end products. The Transflective polarizer is a mixture of Reflective and Transmissive. It provides the ability to read the LCD with or without the backlight on. It will work for all lighting conditions from dark with backlight to direct sunlight which makes it the most common choice. There is no cost difference between Transflective, Transmissive and Reflective.

Focus LCDs can provide many accessories to go with your display. If you would like to source a connector, cable, test jig or other accessory preassembled to your LCD (or just included in the package), our team will make sure you get the items you need.Get in touch with a team member today to accessorize your display!

Focus Display Solutions (aka: Focus LCDs) offers the original purchaser who has purchased a product from the FocusLCDs.com a limited warranty that the product (including accessories in the product"s package) will be free from defects in material or workmanship.

Available in character and graphic formats, COG (Chip-On-Glass) LCD Displays are designed without a PCB. The LCD driver/controller is bonded directly to the glass of the display. This allows COG displays to be smaller in size, more cost effective and a highly customizable display solution compared to typical LCD modules with a board.

Dr Pan: Hello, Greg. COG is the abbreviation for chip on glass. It is a technology, which IC is bonded directly onto ITO glass. COG technology is usually used in small size dot matrix monochrome LCD module and TFT LCD module.

NO.1, it can greatly reduce the size of the LCD module because it doesn’t have PCB and it can be as thin as 2.0mm (maybe thinner). The thinner the more expensive.

NO.3, it is cost effective over COB LCD and can totally replace COB LCD in function, especially in graphic LCD modules, because it reduces the number of IC.

NO.4, for some dot matrix LCD modules, it is not possible to apply COB LCD technology because it is too crowded to place so many points on the view area. COG LCD is an economical and feasible solution because the pitch is smaller .

Being one of the reputed organizations in the industry, we are widely acknowledged in offering a unique range of LCD Display 16X2 B-W. Offered product is well-manufactured under the supervision of highly skilled andread more...

Monochrome Graphic LCDs include TN, STN, FSTN, FFSTN technologies with polarizer in positive mode or negative mode options. COG (Chip on Glass) Constraction. Graphic LCD modules include different options of polarizer in reflective, transmissive or transflective types. LED backlights are available in various colors including yellow/green, white, blue, red, amber and RGB. Available sizes from 1.2’’ to 5.2’’ (128x32~256x128 pixels). Main features:

Our main products consist of monochrome LCD, LCM, TFT module, OLED module and controller of display applications, etc. Products are widely applied in fields of new energy, electricity, medicals, communications, ETC, home appliances, instruments, digitals and the others. We provide our customers with high cost-effective products, all-around technical supports and superior after-sales service.

Vitek provide a full line of graphic COG LCD Modules and monochrome COG Module with or without your choice of backlight. There are four version, 16x1 LCD module, 16x2 LCD module, 128x32 LCD module and 128x64 LCD module. The popularity of these displays allows Vitek to offer highly competitive price and various different options.