1.5 lcd module factory

REA128128A is a graphic COG OLED display module with resolution 128x128 pixels. Module size is 34.2x45.5 mm; Active area size is 26.86x26.86 mm (1.5 inches diagonal). The additional PCB on this 1.5” 128x128 OLED display allows users to connect cables and save time on developing PCB on their own.

To make the module more user-friendly, we"ve also integrated the setting of interface and VCC circuit. There are 4 screw holes on the PCB for easy assembly and quick mounting. This OLED module has built-in IC SSD1327 supporting 4-line SPI/I2C interfaces. Our OLED boasts high contrast ratio 10,000：1 making the visual performance stand out from traditional displays. The module works within temperature from -40℃ to +80℃; Storage temperature range is -40℃ to + 85℃.

The module uses 4-wire SPI communication by default, that is, BS0 is connected to 0 by default (1 and 0 do not represent the level, but the welding method of resistance connection, the specific hardware connection is shown in the table below);

The OLED supports 8bit 8080 parallel, 8bit 6800 parallel, three-wire SPI, four-wire SPI and I2C control. Because parallel control will waste IO ports, three-wire SPI is not commonly used, so the module can choose four-wire SPI and I2C control.

After the compilation is complete, the main file is generated, enter the command according to the OLED model you are using.If you have purchased a 1.3inch OLED Module (C), please enter the following command:

2. The module_init() function is automatically called in the INIT () initializer on the LCD, but the module_exit() function needs to be called by itself

Python has an image library PIL official library link, it do not need to write code from the logical layer like C, can directly call to the image library for image processing. The following will take 1.54inch LCD as an example, we provide a brief description for the demo.

For examples, if you are using 1.3inch OLED Module （C）,you need to comment out the line 105. (Note: there cannot be multiple sentences without comment at the same time; the line number may be changed, please modify it according to the actual situation)

Choose the folder according to the LCD model you are using, and open the xxx.ino file. Take the 1.3inch OLED Module (C) as an example: open OLED_1in3_c, then double-click OLED_1in3_c.ino to open the Arduino project.

A: We make the part number according to the different colors and different display effects of lcd. For example, this part number JHD12864-G13BSW-B, "12864" means the resolution of lcd, "BSW" describe the backlight, "B" in "BSW" means "backlight", "S" in "BSW" means "three leds in the backlight", "W" in "BSW" means the color of backlight "white; last letter"B" means the display effects of lcd, signifies "Blue", therefore, in a words, this part number means the lcd is "white words over blue background, white backlight".

WEA128128A model is the extension item of WEO128128A which is having a PCB board on module; it’s diagonal size 1.5 inch, made of 128x128 pixels. This PCB board with four mounting holes is an easy method for customers to fix modules on their applications. WEA128128A OLED module is built in with SSD1327 IC; it supports 4-wire SPI interface; optional I2C interface, 16 (4bits) gray scale, driving duty 1/128, supply voltage for logic is from 3.3V ~5V, the display with 50% Check board current is 160 mA @3.3VDD (typical value).

This OLED module is suitable for smart home application, medical device, smart control, meter, etc. WEA128128A module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.

Display model TT150RGN10A is a color-active matrix thin film transistor(TFT)liquid crystal display(LCD)that uses amorphous silicon TFT as a switching device. This TFT LCD has a 1.5 inch diagonally measured active display area with HD(480 horizontal by 240 vertical pixels)resolution.

WEA128128A model is the extension item of WEO128128A which is having a PCB board on module; it’s diagonal size 1.5 inch, made of 128x128 pixels. This PCB board with four mounting holes is an easy method for customers to fix modules on their applications. WEA128128A OLED module is built in with SSD1327 IC; it supports 4-wire SPI interface; optional I2C interface, 16 (4bits) gray scale, driving duty 1/128, supply voltage for logic is from 3.3V ~5V, the display with 50% Check board current is 160 mA @3.3VDD (typical value).

This OLED module is suitable for smart home application, medical device, smart control, meter, etc. WEA128128A module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.

Kingtech is one of the leading TFT LCD display OEM/ODM manufacturers in China since 2003. Customization is allowed for projects such as industrial devices, medical, POS, logistics devices, smart home applications and etc.

To provide a one-stop LCD display solution. During the last 17 years, based on LCD manufacturing as our center, we gradually expand to the TFT capacitive touchscreen, driving board, software hardware design, and complete industrial computer solution.

As a professional LCD screen supplier/ LCD display supplier/ LCD panel company/ LCD module manufacturer, Kingtech LCD aims to provide a one-stop service and solve your problems. With a strong LCD Display module R & D team and strict quality management of IS09001, IS01400ATF16949 certificates.

This 128x128 resolution graphic OLED is ideal for quick and easy prototyping. The OLED module is breadboard friendly, Arduino ready, and has built-in logic level shifting for 3.3V to 5V operation. This self-illuminating display presents full color graphics on a black background. With this OLED you can expect top speed response times and high contrast images from any angle. This RoHS compliant display has serial interface compatibility, a built-in SSD1351 controller, and a microSD card reader.