keurig 2.0 lcd screen not working manufacturer

Technology is great… until it stops working. Your fancy Keurig 2.0 comes with a touch screen display. Many owners have experienced a sudden issue with the Keurig 2.0 touch screen not working properly. It may dim, blank, or have lines running through it. Here are some simple things you can try to do to fix it.

If the reset doesn’t solve any issue you are having with your screen, you may want to try simply wiping it down. It might sound crazy, but this simple fix has worked for several Keurig owners on social media.

Turn the machine off. Spray a little bit of Lysol or Windex onto a soft cloth or paper towel and wipe the screen. Be sure clean around the edges where the bevel meets the screen. Dirt and dust can get trapped in there and cause the Keurig screen to not be working the right way.

If none of the above solutions worked for your Keurig 2.0, you should contact Keurig support. If you registered your machine and it is still under warranty, they may be able to help you fix it.

If the display on your Plus Series / Keurig® 2.0 brewer is blank, or is not displaying content as expected, please try the following troubleshooting steps:

Step 5: When the LCD is navigated back to the “Lift to Begin” screen, raise the handle and lower it back down. Is the brewer prompting to start a brew or water only dispense?

Keurig 2.0 comes with newly developed innovative technology and has acquired a positive rating globally since it delivers silky and swift coffee in a matter of seconds. Keurig 2.0 brewers were launched in 2014, and after a few years, they were discontinued.

Keurig 2.0 comes with a touchscreen Display. However, many Keurig machine owners complained about the sudden issue with Keurig 2.0 touch screen not working properly. The issue is mostly dim, black, or lines running through the machine. Some customers have also reported broken screens on Keurig 2.0

Unfortunately, there is not as exact information available to solve these issues, so I have done an extensive research to find out the right solution. So, keep reading to learn how.

Normally the most common Reason for the Keurig touch screen not working is a software issue. This problem can easily be countered by resetting the machine or simply restarting the machine.Reset the machine

If resetting the machine doesn’t work for you, try cleaning the touch screen of your Keurig machine. This simple fix appears to have worked for some Keurig owners.

All you need is to turn off the machine. Wipe the screen with a soft cloth or paper towel dampened with some cleaning agent or water. Make sure to clean the screen thoroughly because sometimes dirt and dust can get caught within the screen, preventing the Keurig screen from working properly.

Check the LCD screen if your Keurig screen is not working properly. The reason might be the connection of your LCD screen becoming loose. Here is a step-by-step guide on troubleshooting the Keurig screen.With the help of a screwdriver, remove two screws (140 mm screws) that are located on the lower side of the chamber lid. Also, remove the top black housing of the Keurig coffee maker which surrounds the screen.

Open the snaps that are holding the LCD screen with the brewer with a metal spudger. ( be careful as these snaps are fragile and might be prone to leakage)

Detach the white modular. This is used to connect the LCD screen to the circuit board’s wires. By gently squeezing the sides and pulling them around, you can remove it.

Plug the white modular back properly and see if the screen has started working or not. If yes, That’s Great! If not, then might be the screen is damaged and you have to replace it.

If none of the above steps helps in fixing the issue, you need to contact Keurig customer supportto seek professional help. If you have registered your machine and it is still under warranty, they will assist you in solving this problem free of cost.

Don’t worry if your Keurig 2.0 touchscreen isn’t working; you’re not alone! We’ve guided you through no of the steps to fix the problem in this blog article.

We hope this information helps you in resolving your Keurig 2.0 touchscreen issue. If the screen is still not working then contact Keurig support or seek help from a technician.

In this blog post, we’ll walk you through the steps to take to fix Keurig 2.0 Touch Screen Not Working. Whether it’s a simple software issue or something more serious, we’ll help you get your machine up and running again in no time. So what are you waiting for? Let’s get started!

The most common reason for a Keurig 2.0 Touch Screen Not Working is a software issue. This can often be resolved by restarting your machine or resetting the system. If these simple steps don’t work, there may be a more serious problem with your machine. In this case, it’s best to contact

The first step is to restart your Keurig 2.0. This will often resolve any software issues that may be causing the touch screen to malfunction. Follow these simple steps to reset your Keurig:

If the reset doesn’t solve any issue you are having with your screen, you may want to try simply wiping it down. It might sound crazy, but this simple fix has worked for several Keurig owners on social media.

Turn the machine off. Spray a little bit of Lysol or Windex onto a soft cloth or paper towel and wipe the screen. Be sure clean around the edges where the bevel meets the screen. Dirt and dust can get trapped in there and cause the Keurig screen to not be working the right way.

If the touch screen still isn’t working after taking these steps, there may be a more serious problem with your machine. In this case, it’s best to contact Keurig customer service for assistance.

If your keurig 2.0 touch screen not working, don’t worry – you’re not alone! In this blog post, we’ve walked you through the steps to take to fix the problem. Whether it’s a simple software issue or something more serious, we hope you were able to get your machine up and running again with our help. Thanks for reading!

We hope this guide helps you fix the problem with your keurig 2.0 touch screen not working. If you have any other questions or comments, please feel free to leave them below. Thanks for reading!

If your Keurig 2.0 touch screen is not working, the first step is to Restart your machine or Clean The Display. If these steps don’t work, there may be a more serious problem with your machine. In this case, it’s best to contact

Keurig 2.0 touch screen not working: If your Keurig 2.0 display is blank, try unplugging the brewer and plugging it back on. If your Keurig 2.0 touch screen is still cold towards you, get ready for some troubleshooting. Step 1: Plug in your Keurig 2.0. The power icon should be at the bottom left of the display.

Simple yet effective Keurig troubleshooting tips, tricks, and quick fixes to common problems of all Keurig Coffee Makers including Keurig 2.0, Keurig Mini, Keurig Rivo,and many more. Find ways of getting around your everyday Keurig Coffee Maker troubles.

The Keurig Coffee Machinestaring at you from your countertop has been a spooky jerk lately. You are frustrated and storming the web to find a cure for your Keurig. This does not sound anything like excellence, surely. And all I am doing is discussing the Dutch Language.

Think about all the days Keurig has served savory cups to the coffee addict in you. Now, keep calm and follow these Keurig troubleshooting tips to make your

While Keurig coffee makers usually last 3-5 years, there is a range of things that can go wrong with a perfectly well-functioning machine. Keurig is no different.

From refusing to switch on to refusing to close shut, it can come up with anything. It can stop dispensing water, stop heating, start leaking and even demand to add water when it is already full. A non-responsive touch screen and the power button is another array of trouble that you may face.

Sometimes, after a power outage, your Keurig may simply seize to work. Even if everything seems alright from the outside, it may start brewing an odd quality or quantity of coffee. The one that freaks me out is when it starts making a humming noise while it’s turned off.

One single solution to multiple Keurig problems is the Keurig Coffee Maker Reset option. Reset your Keurig and see whether your issue has already been resolved or not.

Although Keurig coffee machines are easy to use, they don’t have a reset button. We are going to show you two ways in which you can reset your Keurig- basic and advanced.

Specific Keurig troubles need specific troubleshooting techniques. Here are some common issues, one of which you may be facing right now. We have troubleshooting tips for them.

One of the most common troubles that Keurig users face is their Keurig refusing to work after some time. ‘Not working’ is a general term, though. The more specific troubles your Keurig may come up with are-

When you hold the power button of a plugged-in Keurig coffee maker, normally you’ll notice a power icon and a welcome note appear on the touch screen. If this does not happen, follow these steps-

This device comes with a built-in feature of turning itself off after 90 seconds of inactivity. There is nothing wrong with the device. You just need to power it on every time you use it.

If the “Auto off” feature is turned on, your Keurig Elite will turn off after 2 hours of its last brew. You will know this feature is on if the green “Auto off” light glows.

One common reason why your Keurig may seize to brew is debris such as dried coffee grounds or calcium building inside the waterline or pump. Tap water contains a variety of minerals and that is what causes this trouble.

Step 1: Hand wash it with mild soap and a soft cloth. [Note: The reservoir is not dishwasher proof, so you have to hand wash it. Use mild dishwashing soap such as

You have not changed your coffee brand and have done nothing new. The coffee that your Keurig brews for you is supposed to retain its taste. Instead of delivering that consistency, your Keurig is brewing odd-tasting coffee.

Believe me, when I say this, it is not a specific Keurig issue. It can happen to any coffee machine when a significant proportion of minerals accumulate inside it. These minerals come from the tap water that you use to fill the water reservoir.

If you are not getting the brew size you selected and your cup remains half empty, you are looking at a clogged needle problem here. A coffee maker needle gets clogged by coffee grounds and cocoa mix.

Step 2: Carry out a cycle of water-only brew. If you choose a 6 oz size brew, then keep a measuring cup and see whether your Keurig has correctly dispensed 6 oz water or not.

But before you do that, it is highly recommended that you start using a water filter for your Keurig Coffee Machine. A water filter removes chlorine, odor, and other impurities from water.

Step 5: Clean the entry and exit needles. Make sure to be cautious during this step. Needles are sharp and you would not fancy pricking yourself. May I remind you that a Keurig Needle Cleaning Tool kit really comes in handy.

If your Keurig 2.0 display is blank, try unplugging the brewer and plugging it back on. See if the issue is resolved. If your Keurig 2.0 touch screen is still cold towards you, get ready for some troubleshooting.

When a Keurig becomes non-responsive after a power outage, most probably a sudden surge of voltage when the power came back has damaged your Keurig. It is better to call Customer Care regarding this issue. Even then, you can try these measures to try to bring your Keurig 2.0 back to life. Here is what you can do:

You have unplugged and plugged in your Keurig but the humming persists. As I already mentioned this is something that scared me the most and I found the answer is in its sensor.

Quick Fix: Locate a little ring just underneath the brewing chamber head. Fiddle with it a bit and try closing your Keurig again. This should solve your trouble.

The tips and tricks to get around our Keurig troubles generally apply to most of the Keurig Coffee Machines. Whether you have a Keurig Mini, Keurig 2.0, Mr. Coffee Keurig or Keurig Rivo these are some of the handiest Keurig troubleshooting tips and generally apply to any Keurig Coffee Maker.

You have most probably busted the spooky Keurig trouble by now, but if you could not, then the problem with your device is more complicated. It is a great idea to call Customer Careand let the manufacturer have a look. They are just a call away.

Enjoy your coffee. And while you are at it, think of the good number of K-cups you are going to need now that you have a functioning Keurig at your service.

Your Keurig stopped working or it’s not brewing properly? Need help with Keurig 2.0 troubleshooting? Here are the most common Keurig 2.0 problems and how you can solve them.

This can be frustrating but don’t worry, most of these things can be fixed in a few easy steps. Here are Keurig 2.0 troubleshooting tips you can use to fix your coffee maker (and your morning as well).

If everything seems fine, the water reservoir is in place, the brew button has been pressed and nothing happens for more than 5 minutes, call Keurig Customer Service so they can troubleshoot your machine.

To turn on Keurig 2.0, plug in the brewer, then press and hold the power button (the power icon will appear in the bottom right corner of the touchscreen). You should see a Welcome note. If it doesn’t turn on you can try several things: check to make sure that the brewer is plugged securely; unplug and plug in the brewer; plug the brewer into a different outlet. As the last step, Keurig even recommends resetting your home’s circuit breaker.

It’s absolutely normal for a Keurig 2.0 not to dispense water in a stream but to trickle coffee. As long as you get a selected beverage size everything it’s fine. If you’re getting only partial cups, try cleaning exit needles and descaling the machine.

If nothing is clogged but the machine still leaks, it’s probably the hose or valve inside the machine and you will need to call Keurig Support for further assistance.

If your Keurig 2.0 won’t stop pumping water try the tap method: turn off the unit, remove the water tank, turn the machine upside down, shake slightly and tap the bottom a few times.

If you’re using distilled water, switch to tap, filtered, or bottled water – this should fix the problem. It’s not recommended to use distilled or softened water in Keurig coffee makers.

If your Keurig 2.0 is leaking water after brewing, try cleaning the k cup holder and exit needles, and don’t forget the little tray that sits under the k cup holder. This part can get full of grounds and debris and that can cause problems. Take it out and wash it with dish soap and warm water.

Keurig “water under pressure” error indicates the problem with the exit needle. Carefully open the handle, take out the pod and clean the exit needle. You can clean exit needles using a paper clip or you can use Keurig maintenance accessory. If this happens more than once or twice in a row, or cleaning isn’t helping anymore (that’s possible too) call customer service for assistance.

Unplug and plug in the brewer again to repeat the process, just in case. Make sure that the water reservoir is in place and there is enough water in the tank. If everything seems fine but still nothing happens, it’s recommended to call Keurig customer service.

There is a fix that worked for some of our readers. Unplug the machine, fill the tank with hot water and turn the machine back on. The machine should recognize hot water and start working again. Please note, Keurig only recommends adding cold water in the tank, so while the fix usually helps please use it at your own risk.

Sometimes Keurig 2.0 won’t brew if there’s not enough water in the reservoir. If you lift the handle or move a carafe after you turn on the auto ON, the auto brew will cancel.

Unfortunately, screen issues are a very common Keurig 2.0 problem. Usually either the touch screen doesn’t work or there’s a blank screen. There’s really not much you can do about it except unplug and plug in the brewer to see if it work. This fix can often help (YouTube), so you can try that as well.

Please pay attention to how often this happens. If it’s just once or twice it’s not a big deal, but if you think it’s happening too often, call Customer Service. It’s not something that will solve on its own and you probably don’t want to turn the machine on and off all the time because the screen goes crazy.

If you’re getting ground in your cup, switch to tap or bottled water. Keurig doesn’t recommend using softened or distilled water in their machines. If you’re using softened water, empty the tank, fill the tank with tap water and run a few rinse cycles to rinse the machine. This should solve the problem and you should be able to make the coffee without any issues.

If you want to use your own coffee in Keurig 2.0 or you simply prefer eco-friendly options, you can purchase Keurig 2.0 reusable filter for $8.00. This filter works with all 2.0 series brewers and it’s optimized for brewing a k-cup size (4 – 12 ounce). If you want to brew your own coffee as a carafe, you can get a reusable carafe filter.

I hope this helps. If this didn’t solve your problem or you don’t see a specific issue listed here, please contact Keurig Customer Service for further help. Customer Service is available 7 days a week at 866-901-2739.

Keurig® Home Brewers and K-Cup® pods offered for sale on this website are only available to home consumers in the United States. We are not authorized to sell Keurig® Home Brewers or K-Cup® pods to business customers via our website please call 888 774 6939 or info@crosscountrycafe.com for further information. Best price guarantee is valid for named brand K-Cup® pods or Keurig® brewer only. K-Cup® pods and special promotions listed on crosscountrycafe.com are while supplies last, no rainchecks available. Standard shipping rates apply. Promotions may be combined with other coupon codes offered through crosscountrycafe.com. Does not apply to previously purchased items. Cross Country Cafe claims the right to adjust, change, and modify all offers without notice.

Keurig single-serve coffee makers are incredibly convenient, brewing individual cups of coffee at the touch of a button. But when they malfunction, all that convenience goes right out the window.

Resetting your Keurig can solve a range of problems, giving you back your tasty cups of fresh coffee. In this guide, we’re going to show you how to reset your Keurig — the simple and effective way. Whether you have a 1.0 or 2.0 Keurig brewer, we have the easy steps!

First, we’ll cover resetting Keurig 1.0 models. If you have a 2.0, scroll down or click here to find the simple steps. You’ll be back to easy brewing in no time!

The good news is that Keurigs are easy to reset! Even better, for resetting Keurigs, you don’t need any special tools or materials. Here’s how to quickly reset a basic Keurig machine like a Keurig Mini:

The first thing to try is opening and closing the K-Cup lever. If your Keurig’s brew cycle was interrupted, this will reset it so that it’s ready to brew again.

If you’re using a Keurig 2.0, you may need to try some additional steps. Keurig 2.0 models have more complicated computers and displays, so they can be more difficult to fully reset. Here are three simple troubleshooting options for your Keurig 2.0 reset:

If your Keurig has a digital display, start by looking through the menu, resetting any settings that don’t look right. For example, if your brewer is turning itself off randomly, you’ll want to check that the energy-saving and/or auto-off features are turned off.

Your Keurig may have an air bubble in its tubes that’s disrupting the water flow. To fix this, turn off and unplug the machine. Then remove the water tank (if possible). Hold the brewer upside down over a sink and hit it firmly on the side. This should dislodge any bubbles.

If your display is blank or malfunctioning, unplug your brewer, wait a minute, and plug it back in. Turn the brewer on and open the menu. Set the clock and adjust any settings to your preferences. Return to the “Lift to Begin” screen and raise and lower the brewer lever.

That’s it! Your Keurig should be fully reset and ready to brew. If you’re still having issues, it may be time to call Keurig’s customer service or check on your warranty status.

The first thing to try is opening and closing the K-Cup lever. If your Keurig’s brew cycle was interrupted, this will reset it so that it’s ready to brew again.

We hope this guide helps you easily reset your Keurig. These brewers are convenient and easy to use, but they don’t have reset buttons, making the process a little trickier. Luckily, the simplest method for resetting Keurigs — unplugging your Keurig for an hour or two — often works! And if you’re still having issues, it may be time to descale or prime your Keurig.

If all else fails, you can contact Keurig directly. The company may be able to walk you through more detailed troubleshooting, help you find an authorized repair shop, or send you replacement parts. Hopefully, you can get back to delicious cups of coffee soon!

Keurig coffee makers are a great way to up your coffee game, but have you ever wondered, "why is my Keurig not working?" It"s a common question as they"re responsible for alarge portionof coffee maker sales.

Let"s look at some easy DIY fixes for some of the most common issues when your Keurig won"t brew. These have been gathered from our own experience, and from other Keurig owners in the Keurig community - so they all the common problems.

If you’re wondering, ‘how do I get my Keurig to work?’, one of the most straightforward fixes for a Keurig machine is correctly assembling all the parts.

For example, a common problem for many people is that the Keurig water reservoir isn"t installed correctly.It should have a magnet holding it in place. If the reservoir is in the right place, then the problem will be in another part.

Missassembled parts can happen on any Keurig machine and it"s one of the most common Keurig problems, so it’s crucial to check them when troubleshooting. Examples include Keurig Duo troubleshooting and Keurig 2.0 troubleshooting.

The coffee grounds in Keurig problem is very common and can ruin the quality of the coffee Keurig brews. This can even mean the Keurig won"t brew at all. Keurig Mini troubleshooting and Keurig K155 troubleshooting, along with troubleshooting for other Keurig machines, includes dealing with trapped coffee grounds.

Turn the machine upside down and gently tap it a few times. Turning the machine upside down should remove residual water and any leftover coffee grounds trapped in your Keurig, especially within the internal mechanism and the K-cup holder.

The needle of a Keurig needs to be maintained often. This is true when troubleshooting all Keurig models, including Keurig Duo troubleshooting and Keurig Elite troubleshooting.

The needle within the brew head must be kept clean because it punctures the lids of the K-cup capsules inserted into your Keurig machine, and without it your Keurig won"t brew delicious coffee. You can do this manually by sticking a paper clip or pin in the tube where the Keurig needle punctures the K-cup.

Depending on the Keurig model, the needle can be a tricky part to clean. To clean the needle thoroughly, you will also need to clean all of the internal filters of your machine.

A clogged water reservoir is due to a build-up of debris or used coffee grounds in the cold water reservoir. This can mean that your Keurig won"t brew, or that your brew cycle is much slower.

This build-up results from constant usage and not enough water reservoir cleaning. This won"t be relevant if you’re doing Keurig K Mini troubleshooting as it lacks a reservoir.

Simply remove the metal mesh and wash it with warm soap and water to clean the water reservoir. Then dry it with a paper towel before re-inserting it into the Keurig machine.

When you have re-inserted it, do a few brewing cycles with just water to test it and eliminate any soapy residue which can mean your Keurig coffee tastes bad. If it’s still not brewing, you will need to keep troubleshooting your Keurig.

A sign of this could be your Keurig"s electrical display. For example, the display might be flashing, not displaying all the information correctly, or the touch screen might not work.

The best way to fix this problem is to unplug your Keurig for a few minutes before plugging it back in. If this technique fixes it, then it was simply an electrical glitch.

However, if the problem persists and your Keurig won"t brew, it might be something to do with the mechanics rather than an electrical fault. In that case, consider the other Keurig machine troubleshooting tips in this article.

Another common problem is that your Keurig won"t brew a full cup of coffee. If the coffee Keurig brews is less than full cup could be due to several different reasons.

Your Keurig coffee machine not turning on can be one of the trickier problems to fix (especially if you’re craving a coffee first thing in the morning.)

Usually, if your Keurig is plugged in and you hold down the power button, your Keurig should turn on, and you should receive a welcome greeting on the display screen.

However, if it doesn’t, the Keurig power button not working could be the problem, and you’ll need to find out. Make sure that your device is plugged into a socket that is working.

Secondly, you will need to ensure that no timers and automatic shut-off features are switched on. You can find which ones your Keurig has by referring to the instruction manual or by watching some videos online.

Your Keurig dispenses water over the K-cup and grounds to create your coffee. If no water is coming out of your Keurig, then the Keurig pump not working could be the reason.

How the Keurig should be pumping water is a complicated subject, so we"ll look at it in brief. There are numerous issues that can affect the water pump on Keurig machines.

This is easily done when you"re in a rush, and it"s the first thing that you should check if this happens. If it"s not overflowing, there is likely a blockage somewhere in the machine.

The Keurig touch screen not working is another issue that can stop brewing. If your touch screen isn"t working, you should use the same technique mentioned above that we used to find any electrical faults.

Another thing you can do is clean the touchscreen. Spray a little bit of window cleaner onto a soft non abrasive cloth or paper towel. Make sure to clean around the edges and the crevices on the outer edge of the touch screen.

If most of the buttons such as the ‘Add Water,’ ‘Heat,’ and ‘Cup Size’ buttons are on or flashing, then there could be an issue with one of the parts of your Keurig machine.

Next, you should press the Keurig brew button to run a brewing cycle with water alone. Remove any K-cup coffee capsules and run the brewing cycle. Select 6oz or 8oz and measure the amount with a measuring cup. If it’s the correct amount and all lights return to normal, your Keurig will be fixed.

If it’s not the right amount of coffee, then remove the water filter and press the brew button again to repeat the brewing cycle. If you now get the right amount of coffee, you’ll need to change your water filter.

When a Keurig brewer is powered on, a green light indicator or a display screen is activated at the front of the machine, signaling that the brewer is ready for use. If there’s no green light or if the display screen isn’t activated, it means that your brewer isn’t powered on and can’t brew.

The Keurig brewer may fail to turn on due to switch, power chord, thermostat, fuse, and control board problems. First, troubleshoot your house’s electrical wiring and check if the socket is powered before troubleshooting Keurig components.

If your Keurig coffee machine won’t turn on, the problem most likely lies within the electrical outlet rather than the brewer itself. Or maybe, the power cable could be loosely connected to the socket. If you’ve checked and ensured that the Keurig brewer is well plugged in but still not powering on, try powering on a different appliance on the same outlet, such as a toaster or a blender.

If the other appliance powers on, then there’s a problem with your Keurig brewer. Or maybe you’re simply forgetting to turn the power switch at the back of your Keurig brewer to the ‘ON’ position.

Common causes of power-on failure in Keurig machines include a non-responsive ‘power on’ button and display screen. Other parts that could develop faults leading to the Keurig not turning on are described in detail below.

External ‘power on’ buttons, switches, and knobs engage the switch, causing your Keurig coffee maker to turn on. Thus, if there’s a power-on failure, it’s likely that there’s a fault with the engagement of the switch, or the switch itself could be damaged.

Your Keurig unit may also fail to turn on if the power cord is cut and the wires aren’t properly connecting. An old power cord that has been bent too many times may also have wires with poor contact.

The control board, circuit board, or circuit motherboard is the brain of your coffee maker. It tells your Keurig what to do by facilitating communication between all the electronic components. As such, if the ‘power on’ components of the control board develops a problem, the machine won’t turn on.

The thermostat works to regulate the internal temperatures of your Keurig, preventing the machine from overheating. A faulty thermostat can also cause power-on failure in your Keurig brewer, even if the thermal fuses aren’t burned out.

The fastest and simplest fix for a Keurig coffee machine that won’t turn on is to reset it. However, Keurig brewers don’t have a reset button. There are two general types of Keurig brewers: Keurig 1.0 and Keurig 2.0 machines. Each of them has different procedures for resetting.

Finally, reattach the water tank, plug in the brewer, and turn the power button back on. At this point, the Keurig brewer will have been reset and ready for use.

Keurig 2.0 models are much harder to fully reset as they feature more computer-driven components. A basic reset as detailed above might not do the trick, and the advanced reset procedure detailed below is recommended to get it to turn on again.

Note: Basic and advanced resetting may fail to solve the power-on failure problem on your Keurig brewer. In such instances, you may have to troubleshoot and repair or replace the individual faulty components.

We recommend calling in an appliance repair professional to fix your faulty Keurig switch, power cord, thermostat, or circuit board. There are also various online resources that can help you safely troubleshoot and repair appliances like Keurig brewers by yourself.

The conditions of your cup of coffee can make or break your morning. The Keurig coffee maker can be a great way to ensure you get your morning java with simplicity and speed! Being one of the most popular coffee makers on the market, you can expect to have a consistent taste and manageable machine. That is, however, if your machine is working properly.

Although the Keurig is an effortless way to get a quick brew, everything convenient comes at a cost. Your machine will have issues and need some troubleshooting now and then. Luckily the solutions are quite easy and don’t require complex technical skills. So to protect you from a ruined morning and a broken heart, let’s go over common Keurig coffee problems and how to fix them.

If you find that your Keurig isn’t brewing hot coffee, this can leave you frustrated and regretful about purchasing your Keurig machine. Don’t panic; let’s check to see if your machine is clogged and how you can clean it properly.

Keurig cleaning can be a drag, but it’s necessary for your machine to function correctly. Before cleaning your Keurig, make sure you unplug your coffee maker first. Ensure your machine has thoroughly cooled before cleaning.

A clogged Keurig is a common cause of most problems with your machine. If you have been using your Keurig coffee brewer for more than six months, you likely need to have it cleaned. Luckily they have made the coffee maker easy to take apart, which makes the cleaning process much more taxing.

Resetting your Keurig shouldn’t be difficult, but sometimes you may encounter errors. Here are some of the main reasons why you can’t reset your Keurig:

Rather than going through every possible problem you may encounter with a Keurig coffee maker, let’s cover the most common issues users face with their machines. If you finish this article and still haven’t found a solution, you may need to contact Keurig customer support.

Although the Keurig coffee maker is a brilliant piece of java tech, it does not have a mind of its own (even though it can sometimes seem that way). A common problem some Keurig owners face is that their machine sometimes turns on or off on its own. Before you think your Keurig is haunted, there is an easy fix for this issue.

Sometimes the genius of the Keurig machine can get in its own way. The new and improved models tend to have settings that many Keurig owners don’t know are active. The automated brewing feature is one of the most sneaky issues of Keurig troubleshooting.

So if your Keurig seems to be haunted, it’s more likely that you have accidentally activated the automated brewing feature. After you turn this setting off, your machine will start to behave itself again. If you always like your coffee at the same time each day, this feature may be helpful to you.

If you notice water leaking from the cold water reservoir, you may need to order a replacement tank. How do you check if the water is leaking from the cold water reservoir? You can follow these steps:

If you discover that your cold water reservoir isn’t the direct source of the leak, other parts might be misplaced, causing the leak. Your gasket may not be lined up properly. The gasket is located around the puncture needle.

A clogged Keurig is a likely culprit here. Over time, your Keurig can get clogged, affecting the quality and quantity of the coffee you brew. One super-easy way to fix this is to brew a few rounds without a k-cup. This will flush water through the system and clean out any gunk or scaling inside your machine.

If you are consistent with your k-cups, there is no reason why the taste of your coffee should change. Once again, the flavor of your coffee can be ruined by a clogged Keurig machine. Why does this affect the taste of your k-cup? When the water line is clogged with debris, coffee grounds, or calcium buildup, these nasty bits can get into your Keurig coffee.

Even though most of the newer modules have an indicator light to tell you when to clean your Keurig, you should clean your machine every 3-6 months, depending on usage. This will protect you from an awful bitter “good morning!”.

Sometimes your Keurig can look like the dashboard of an old used car. All of these weird, confusing lights are messing with your morning coffee! Don’t get overly frustrated at these occurrences because they are not difficult to sort out.

First, you want to ensure the water reservoir has been properly filled. This error message might not actually be wrong. I know I’m guilty of making this error, especially before my morning mug(s).

Are you the proud owner of a Keurig 2.0? If you are, you probably haven’t run into this problem yet. While most people enjoy this intricate coffee brewing system, others can’t even get it started.

If your Keurig machine is properly connected to power, you may want to try a different outlet. If you are still having trouble powering on your Keurig 2.0, you may need to contact their customer support.

If you have a strict morning routine, nothing can be more annoying than your Keurig shutting off unexpectedly! First, check the reservoir magnet, then make sure all timers and automatic shut-off features are inactive.

Your Keurig is already a pretty noisy machine. There will be some strange sounds when you brew your coffee, but most are normal. Just make sure that your Keurig machine is cleaned properly to prevent any damage to the pumps.

Again, please never forget to keep your machine clean to prevent clogging or other damage. If coffee grounds or minerals build up and clog your Keurig, you will have a bad time.

Though it can be tedious to clean over and over again, remember all the joy your Keurig brings you in the morning. Respecting your coffee equipment is a huge part of having a pleasant coffee experience.

If your Keurig machine is clean and you still have issues with heating, you may need to focus on the water pump. If it is damaged or malfunctioning, it could be time to order a replacement. In that case, make sure to contact Keurig customer support.

Coffee grounds floating at the top of your morning cup? Yuck! Don’t throw your Keurig out just yet, as the solution might not be in the machine. The type of grind for the beans in your k-cup can be why you have coffee grounds in your coffee cup. This can easily be avoidable by using a coarse grind for your k-cup.

If you aren’t satisfied with the taste or consistency of your coffee, I suggest choosing a darker roast. This will help to give you more flavor and a more desirable cup of coffee. There is a wide variety of k-cup flavors to choose from. If you get bored with one, experiment with another. The Keurig is great for this reason; there is a wide variety of coffee to explore!

The Keurig milk frother is a great addition to your coffee bar because it lets you make barista-quality lattes from the comfort of your own home. But, just like any other machine, sometimes it stops working. Common issues people run into are a failed milk frother even though the light is on or the frother heats the milk without frothing it.

If this is the first time you’re using your milk frother, make sure you use the correct milk. Skim milk, creamer, or milk alternatives like almond milk might not froth the way you’re used to. According to Keurig, the best milk to froth is either whole milk or 2%.

If you’re sure you’re using the right milk and it’s still not frothing, make sure the lid is on correctly and the milk level is not over the max fill line. If it’s still not working, ensure the whisk is correctly placed inside the machine and free of any gunk or debris.

One of the most common issues people report experiencing with their Keurig machine is that it dispenses too much water. So, if you’re experiencing an excess water leak after your coffee has finished brewing, you’re not alone. Lucky for you, it’s an easy fix.

If your Keurig isn’t turning on, ensure it is properly plugged into the outlet. Next, try using a few different outlets around your kitchen to ensure the issue is your machine, not the outlet you’re using.

If your Keurig splatters while brewing, you might be experiencing a clogged brewing needle. Sometimes if the machine is not cleaned and descaled on a regular basis, excess coffee grounds might build up inside the brewing needle.

Verify that you’re using a Keurig-approved coffee pod and that it fits correctly inside your machine. Using a third-party K-pod might cause your machine not to close because it’s too big. Make sure there is nothing else that could be blocking your machine from closing.

If it’s still not closing, locate the ring under the brewing chamber head. Adjust the ring to make sure it’s sitting nicely in its spot. This should ensure your Keurig closes correctly.

Beeps are the only way your Keurig machine has to communicate that something is wrong. If you’re experiencing excessive beeping, it might be time to clean and descale your machine. If this does not stop the beeping, ensure all Keurig pieces are properly aligned and the machine is plugged into the wall correctly.

Your Keurig should not leak water while preheating, so if it is, you might have a clog. Make sure the brewing needle and k-cup holder are free of debris and accumulated coffee grounds.

If this does not solve your leaking issue, the problem is not due to a clog, and the issue is with the hardware. For hardware issues, you may need to contact Keurig customer support at 1-800-901-BREW(2739) or purchase a new machine if your current one has run its course.

The first step to figuring out why your Keurig is only making half a cup of coffee is ensuring the water reservoir is aligned properly. Keurigs operate with magnets, and any misalignment can lead to problems with your machine.

If it’s still not brewing a full cup of coffee, your machine is clogged and needs to be cleaned. Carefully use a needle to clean the tip of the brewing needle and clear out the accumulated coffee grounds. Use white vinegar or Keurig’s descaling kit to clean out any limescale buildup inside your machine.

Descale your Keuring regularly to ensure you do not face this problem again in the future. When you brew coffee with your Keurig, the inside of your machine accumulates limescale buildup. Descaling is the process of removing that buildup and thoroughly cleaning your machine to ensure you have the perfect cup of delicious coffee every time.

Make sure your Keurig is plugged in, and your chosen outlet is working correctly. To determine if your outlet is working correctly, try plugging a few different appliances into the outlet to see if they work. If they also don’t turn on, the issue is with your outlet, not the machine.

If that does not turn your screen on and you’re sure the outlet is not the problem, try unplugging the machine, waiting 30 seconds, and plugging it back in.

Your Keurig should not be smoking or steaming during the brewing process. If you see smoke, unplug the machine immediately. Remove any flammable objects near your machine and watch it for a few minutes to ensure nothing catches fire. Your safety is worth more than your cup of coffee.

Some common problems that might lead to steaming or smoking Keurig are an empty water reservoir, a dirty machine, over usage, or faulty electrical components. To prevent smoking or steaming, never operate your machine with an empty water tank, and clean your Keurig regularly.

A leaky Keurig coffee pot has plagued coffee lovers since the invention of the K-Duo Carafe. The leaking you’re experiencing could be due to a ridge left by the plastic mold for the carafe spout. This ridge can be removed by gently sanding it down with sandpaper.

Well, because it’s brand new. Think about it, your new Keurig has never had water run through it before, so it’s only natural you might experience a bit of a plastic taste in your first brew. To get rid of it, brew a few cups of coffee without a coffee pod in the machine. This will run hot water through the machine and eliminate the remaining plastic taste.

It can be frustrating when you’re trying to brew a cup of coffee by pushing the blue light on your machine, but the light stays on, and there is no coffee brewing. Lucky for you, there is a simple fix. Open and close the brewing lid and press the button again. Your Keurig should begin to brew your coffee.

As with most issues you might run into, your Keurig shutting off mid-brew could result from a clog. Sometimes, the bottom needle gets clogged by excess coffee grounds and does not properly puncture the bottom of the K-cup. The machine will sense this and turn off to prevent an overflow of water. To unclog the puncture needle, use a needle to gently scrape out the accumulated coffee grounds.

If the puncture needles are not clogged, make sure your water tank is correctly aligned in its holder. If all else fails, your Keurig machine needs to be descaled.

If you’re like me and use your Keurig every morning, you’ll notice when something doesn’t sound right. Like other common problems you’ll run into with your Keurig, a clog or buildup of limescale could be the culprit. Make sure you clear out any clogs and descale your machine when it starts making loud noises.

Additionally, your machine might be making loud noises when drawing water because the water tank is not properly aligned. Double-check to ensure the reservoir is where it’s supposed to be and full of water before you brew your next cup.

If all else fails and your machine still makes noises, it might be time to contact Keurig customer service. They can be reached at 1-800-901-BREW(2739).

The first step to finding out why your Keurig will not pump water is to verify the water tank is properly aligned with the machine. Many Keurig components run on magnets and will not work if everything is not where it should be.

Hopefully, this will solve your water pump problem, but if it doesn’t, it might be an internal issue with the machine’s pump. For additional help, reach out to the Keurig customer service department at 1-800-901-BREW(2739).

If there is water in the water tank and your Keurig keeps telling you to add water, remove the tank and thoroughly clean it and the water pump opening on the base. Make sure the tank is sitting correctly in the base.

There are a few reasons your Keurig machine might be blinking at you. The most likely reason is your machine is sensing a buildup of lime scale and needs to be descaled. If you’ve just recently cleaned your machine and it’s still blinking, make sure the water tank fits nicely in the base and is full of water.

You don’t want your Keurig to immediately run the water when turned on, and it could be caused by excessive air getting in the machine and triggering the pump. To fix this, gently flip your Keurig machine upside down and tap on the bottom to clear any clogs.

This might sound odd, but the Fr error message on your Keurig Duo means the machine is too cold. You might see this message frequently if you live in a colder climate or if you just took your Keurig Duo out of storage. To fix this, bring the Keurig Duo into a warmer environment and let it sit for about 30 minutes to warm up to room temperature. If you live in a cold climate and anticipate your machine getting too cold continually, consider bringing your machine into a warmer room overnight.

If you have a Keurig 2.0 Carafe, you might experience a problem where your Keurig says the setting is incompatible with the carafe. This message lets you know you’re using a K-cup that Keurig doesn’t authorize. To fix this, make sure you’re using a Keurig approved K-cup, as using any third-party pods might damage your machine and void your warranty.

Like almost every other issue you might run into with your Keurig, an error message that says water under pressure could be caused by a clogged puncture needle. When the needle is clogged, it messes up the water pressure since water can’t get through to brew. To fix this, carefully clean the puncture needle with a needle or straightened paper clip to remove built-up coffee debris.

When you hear “regular coffee maker,” that normally refers to a drip coffee maker. The first significant difference between the two is the cost. A Keurig is a bit more expensive than the average automatic drip machine. However, we cannot just look at the price tag when we talk about which one is better.

So which one is better? Well, the drip coffee maker wins that one. But Keurig is more about convenience than award-winning coffee, so if “fast coffee” is your #1 priority, then a Keurig might be right for you.

Though mold is not a common problem for your Keurig coffee maker, you could run into some if your machine isn’t cleaned regularly. Make sure to always rinse and wash your water reservoir. To learn how to wash your brewer, refer to the steps above.

Bleach kills everything, so it must do a great job of sanitizing my coffee brewer, right? No! Not only is using bleach an ill-advised solution for cleaning your Keurig, but it’s also not recommended for cleaning any coffee brewers.

If you want to upgrade your at-home barista lifestyle, you may consider looking at the best Keurigs on the market. As for which model you choose, it all comes down to your taste and how you like to brew your lifeblood. Don’t forget to also explore the wide variety of k-cups available.

This has been a lengthy troubleshooting guide on how to take care of your Keurig. If you diagnose your problem and try one of our solutions, remember to contact Keurig customer support if you still don’t have any luck resolving your issue.

Always remember that this machine requires attention and maintenance. So unless you want to go back to drinking cowboy coffee, I suggest you look after your Keurig.

Over the years, people have come to find that most problems with Keurig aren’t the end of the world. They wouldn’t trade their ultimate source of convenient coffee for anything.

While there are a lot more durable and convenient coffee brewers out there, not many can match the simplicity or consistency of the Keurig coffee maker.

Finally, the Keurig community is large, and there are many forums and guides to help you if yours ever breaks down. You can also compare and discover different flavors and little hacks to make your experience a better one.

Originally released to give customers the ability to brew a larger, hotter cup with a max 18 oz brew size (16 oz on the V500), Keurig ultimately decided to discontinue its Vue brewers because they weren"t popular enough to justify the hassle of producing special K-Vue pods.

These Vue brewers used Keurig 2.0"s pod-scanning system (also known as DRM or "Digital Rights Management") to lock out unlicensed third-party pods while simultaneously having programmed brewing instructions of the pod you selected.

Of note, the V1200 and V1255 are both commercial models and are identical. The only difference is where they were originally sold with the V1200 available through Authorized Keurig Distributors and the V1255 available through office supply stores like Office Depot.