keurig 2.0 lcd screen not working supplier

Technology is great… until it stops working. Your fancy Keurig 2.0 comes with a touch screen display. Many owners have experienced a sudden issue with the Keurig 2.0 touch screen not working properly. It may dim, blank, or have lines running through it. Here are some simple things you can try to do to fix it.

If the reset doesn’t solve any issue you are having with your screen, you may want to try simply wiping it down. It might sound crazy, but this simple fix has worked for several Keurig owners on social media.

Turn the machine off. Spray a little bit of Lysol or Windex onto a soft cloth or paper towel and wipe the screen. Be sure clean around the edges where the bevel meets the screen. Dirt and dust can get trapped in there and cause the Keurig screen to not be working the right way.

If none of the above solutions worked for your Keurig 2.0, you should contact Keurig support. If you registered your machine and it is still under warranty, they may be able to help you fix it.

If the display on your Plus Series / Keurig® 2.0 brewer is blank, or is not displaying content as expected, please try the following troubleshooting steps:

Step 5: When the LCD is navigated back to the “Lift to Begin” screen, raise the handle and lower it back down. Is the brewer prompting to start a brew or water only dispense?

remove the phillips head screws under bottom of lcd screen; there are 6 of them. Pop the clips visible all the way around housing. Carefully if your concerned about cosmetics. this will expose the brain, main 2.0 button and lcd screen housing. Unplug lcd screen plugs and motherboard plugs. you could try to find a replacement for these parts which I am in the process of doing, or try to dry it out, which may be too late. you can catch up with me at bigbrainbrotha@gmail.com if you want to see what I found next should I forget to come back with completed resolution. Looking like the lcd is the common issue for all of us with these units. I am sorely disappointed that this hardware was not waterproofed more and keurigs failure to stand behind it is despicable. They know its an issue and offer no support only to discount a new product when this one works fine!

This device however convenient is POORLY MADE. DO NOT BUY IT. I was able to open the unit up. No help from Keurig. I pulled the motherboard and lcd screen out. The motherboard is fine. I was able to get it to run preheating process after touching the back of the lcd screen that is unresponsive to touch. I WIPED the machine down and I get this. TERRIBLE. I is a water device, why would you not put parts that are protected from liquid and steam as I have seen with other complaints. They offered me 35 percent off of a new device instead of taking this piece of junk back and fixing their flawed design. BUT DRONES WILL KEEP ON BUYING won"t we, instead of making them stand behind their product. What sad is people posting here that they got a new one because it was under warranty. FIND A NEW THREAD. Before I shell out another 180 bucks for something that worked for years, and quit working from wiping it down?! THEY KNOW. This should be a recall PERIOD. I will not be buying another product from this company until they stand up and do the right thing FOR ALL OF US! SMH. Shame on keurig. If i can find a replacement LCD it will stay, otherwise I will put this whole thing in the trash and there it will STAY!

LCD damaged from moisture and a TERRIBLE DESIGN by keurig. Its a joke. I cracked mine open since it is no longer under warranty. The motherboard is fine as I am sure yours is. I will keep you posted on fix.

Bypass general customer care and speak to corporate and MAKE THEM SEND YOU A NEW DEVICE OUTSIDE OF WARRANTY. I did. These folks are aware and their engineers are taking pride in fixing the issue. For the folks that posted in here they got a new one inside of warranty WASTED TIME typing to hear yourself talk. Seriously?! Really. I owned this pampered device for 4 years and it worked FLAWLESSLY. I was happy with it and as a matter of fact said it was one of the best appliances I have owned because it was sturdy and it lasts. New one on the way! Because I told them what I found instead of just accepting a discount for a new one and believing what I was told. FIND OUT! Do not accept anything sub-par when you spend the coin on these devices you do.

Simple yet effective Keurig troubleshooting tips, tricks, and quick fixes to common problems of all Keurig Coffee Makers including Keurig 2.0, Keurig Mini, Keurig Rivo,and many more. Find ways of getting around your everyday Keurig Coffee Maker troubles.

The Keurig Coffee Machinestaring at you from your countertop has been a spooky jerk lately. You are frustrated and storming the web to find a cure for your Keurig. This does not sound anything like excellence, surely. And all I am doing is discussing the Dutch Language.

Think about all the days Keurig has served savory cups to the coffee addict in you. Now, keep calm and follow these Keurig troubleshooting tips to make your

While Keurig coffee makers usually last 3-5 years, there is a range of things that can go wrong with a perfectly well-functioning machine. Keurig is no different.

From refusing to switch on to refusing to close shut, it can come up with anything. It can stop dispensing water, stop heating, start leaking and even demand to add water when it is already full. A non-responsive touch screen and the power button is another array of trouble that you may face.

Sometimes, after a power outage, your Keurig may simply seize to work. Even if everything seems alright from the outside, it may start brewing an odd quality or quantity of coffee. The one that freaks me out is when it starts making a humming noise while it’s turned off.

One single solution to multiple Keurig problems is the Keurig Coffee Maker Reset option. Reset your Keurig and see whether your issue has already been resolved or not.

Although Keurig coffee machines are easy to use, they don’t have a reset button. We are going to show you two ways in which you can reset your Keurig- basic and advanced.

Specific Keurig troubles need specific troubleshooting techniques. Here are some common issues, one of which you may be facing right now. We have troubleshooting tips for them.

One of the most common troubles that Keurig users face is their Keurig refusing to work after some time. ‘Not working’ is a general term, though. The more specific troubles your Keurig may come up with are-

When you hold the power button of a plugged-in Keurig coffee maker, normally you’ll notice a power icon and a welcome note appear on the touch screen. If this does not happen, follow these steps-

This device comes with a built-in feature of turning itself off after 90 seconds of inactivity. There is nothing wrong with the device. You just need to power it on every time you use it.

If the “Auto off” feature is turned on, your Keurig Elite will turn off after 2 hours of its last brew. You will know this feature is on if the green “Auto off” light glows.

One common reason why your Keurig may seize to brew is debris such as dried coffee grounds or calcium building inside the waterline or pump. Tap water contains a variety of minerals and that is what causes this trouble.

Step 1: Hand wash it with mild soap and a soft cloth. [Note: The reservoir is not dishwasher proof, so you have to hand wash it. Use mild dishwashing soap such as

You have not changed your coffee brand and have done nothing new. The coffee that your Keurig brews for you is supposed to retain its taste. Instead of delivering that consistency, your Keurig is brewing odd-tasting coffee.

Believe me, when I say this, it is not a specific Keurig issue. It can happen to any coffee machine when a significant proportion of minerals accumulate inside it. These minerals come from the tap water that you use to fill the water reservoir.

If you are not getting the brew size you selected and your cup remains half empty, you are looking at a clogged needle problem here. A coffee maker needle gets clogged by coffee grounds and cocoa mix.

Step 2: Carry out a cycle of water-only brew. If you choose a 6 oz size brew, then keep a measuring cup and see whether your Keurig has correctly dispensed 6 oz water or not.

But before you do that, it is highly recommended that you start using a water filter for your Keurig Coffee Machine. A water filter removes chlorine, odor, and other impurities from water.

Step 5: Clean the entry and exit needles. Make sure to be cautious during this step. Needles are sharp and you would not fancy pricking yourself. May I remind you that a Keurig Needle Cleaning Tool kit really comes in handy.

If your Keurig 2.0 display is blank, try unplugging the brewer and plugging it back on. See if the issue is resolved. If your Keurig 2.0 touch screen is still cold towards you, get ready for some troubleshooting.

When a Keurig becomes non-responsive after a power outage, most probably a sudden surge of voltage when the power came back has damaged your Keurig. It is better to call Customer Care regarding this issue. Even then, you can try these measures to try to bring your Keurig 2.0 back to life. Here is what you can do:

You have unplugged and plugged in your Keurig but the humming persists. As I already mentioned this is something that scared me the most and I found the answer is in its sensor.

Quick Fix: Locate a little ring just underneath the brewing chamber head. Fiddle with it a bit and try closing your Keurig again. This should solve your trouble.

The tips and tricks to get around our Keurig troubles generally apply to most of the Keurig Coffee Machines. Whether you have a Keurig Mini, Keurig 2.0, Mr. Coffee Keurig or Keurig Rivo these are some of the handiest Keurig troubleshooting tips and generally apply to any Keurig Coffee Maker.

You have most probably busted the spooky Keurig trouble by now, but if you could not, then the problem with your device is more complicated. It is a great idea to call Customer Careand let the manufacturer have a look. They are just a call away.

Enjoy your coffee. And while you are at it, think of the good number of K-cups you are going to need now that you have a functioning Keurig at your service.

Keurig 2.0 comes with newly developed innovative technology and has acquired a positive rating globally since it delivers silky and swift coffee in a matter of seconds. Keurig 2.0 brewers were launched in 2014, and after a few years, they were discontinued.

Keurig 2.0 comes with a touchscreen Display. However, many Keurig machine owners complained about the sudden issue with Keurig 2.0 touch screen not working properly. The issue is mostly dim, black, or lines running through the machine. Some customers have also reported broken screens on Keurig 2.0

Unfortunately, there is not as exact information available to solve these issues, so I have done an extensive research to find out the right solution. So, keep reading to learn how.

Normally the most common Reason for the Keurig touch screen not working is a software issue. This problem can easily be countered by resetting the machine or simply restarting the machine.Reset the machine

If resetting the machine doesn’t work for you, try cleaning the touch screen of your Keurig machine. This simple fix appears to have worked for some Keurig owners.

All you need is to turn off the machine. Wipe the screen with a soft cloth or paper towel dampened with some cleaning agent or water. Make sure to clean the screen thoroughly because sometimes dirt and dust can get caught within the screen, preventing the Keurig screen from working properly.

Check the LCD screen if your Keurig screen is not working properly. The reason might be the connection of your LCD screen becoming loose. Here is a step-by-step guide on troubleshooting the Keurig screen.With the help of a screwdriver, remove two screws (140 mm screws) that are located on the lower side of the chamber lid. Also, remove the top black housing of the Keurig coffee maker which surrounds the screen.

Open the snaps that are holding the LCD screen with the brewer with a metal spudger. ( be careful as these snaps are fragile and might be prone to leakage)

Detach the white modular. This is used to connect the LCD screen to the circuit board’s wires. By gently squeezing the sides and pulling them around, you can remove it.

Plug the white modular back properly and see if the screen has started working or not. If yes, That’s Great! If not, then might be the screen is damaged and you have to replace it.

If none of the above steps helps in fixing the issue, you need to contact Keurig customer supportto seek professional help. If you have registered your machine and it is still under warranty, they will assist you in solving this problem free of cost.

Don’t worry if your Keurig 2.0 touchscreen isn’t working; you’re not alone! We’ve guided you through no of the steps to fix the problem in this blog article.

We hope this information helps you in resolving your Keurig 2.0 touchscreen issue. If the screen is still not working then contact Keurig support or seek help from a technician.

Keurig replacement parts 2.0 is a convenient way to make coffee using your Keurig machine in the morning. The company offers a variety of flavors and sizes for you to choose from, but what if your favorite flavor or size runs out? This article will help guide you through some common replacement parts that you might need for your Keurig 2.0.

Keurig 2.0 brewers are popular among coffee lovers for their quick and easy brewing process. However, like any other appliance, parts can eventually wear out and need to be replaced. Here is a breakdown of the most commonly needed Keurig 2.0 replacement parts: The K-Cup Holder: This part holds the cups that get brewed and is located on the front of the machine. Over time, the plastic holder can wear out and start to break down. If this happens, it’s important to replace the entire k-cup holder as it cannot be fixed.

Keurig 2.0 water reservoirs can last anywhere from 6 to 12 months depending on how much use you put them through.If your Keurig water reservoir is no longer holding a charge, it is time to replace it. The reservoir is the part of the Keurig that holds the coffee and water and sends it through the machine. There are several different parts that can potentially need to be replaced, so it is important to know which parts are most likely to need replacement.

If your Keurig 2.0 Drip tray is broken, you may be able to replace it yourself. Keurig drip trays are made out of plastic and can be replaced with a few simple tools.Before you start, make sure that you have the following supplies: a Phillips head screwdriver, a drill bit that is the same size as the screwdriver, and pliers.To replace the drip tray, first remove the front panel of the machine by unscrewing the four screws on the front of the machine. After the front panel is off, you will see the drip tray in front of you.

If your Keurig 2.0 LCD display screen is broken, you may be wondering if it is possible to replace the part on your own. In this article, we will discuss what replacement parts are most needed for a Keurig 2.0 LCD display screen, and we will also provide steps on how to replace the part on your own.If you think that you may need to replace the part on your Keurig 2.0 LCD display screen, first make sure that the machine is unplugged and turn it off. Next, remove the front panel by pressing down on one side and pulling it away from the machine.

Remove the screws that hold the back of the LCD display screen in place and remove the LCD display screen from the machine.Next, you will need to purchase a replacement part for your Keurig 2.0 LCD display screen. The replacement part can be found online or in local retail stores. Once you have purchased the replacement part, carefully install it into the machine by following the instructions that came with the replacement part.If you have any questions about replacing a part on a Keurig 2.0 LCD display screen, please feel free to contact us.

If your Keurig coffee maker is less than a year old, it is probably time for a new K-Cup holder. The original K-Cup holder can wear out over time and may not be able to hold the newer style K-Cups. If you have a Keurig 2.0 model, the original K-Cup holder will not work with that model.The most common part that wears out on a Keurig coffee maker is the plastic housing that holds the coffee grounds and water.

Over time, this housing can cracks and eventually break. If this happens, water will leak onto the electrical components below, which can damage them.If you are having trouble with your Keurig coffee maker, one of the best things to do is to try to fix it yourself. However, if that doesn’t work, or if you just want to replace the entire K-Cup holder, there are several different parts available that you can buy.

A Keurig 2.0 coffee maker can be a very valuable appliance in your home. They are popular for a reason – they make great coffee!However, like all appliances, Keurigs can wear down over time. That means that they may start to malfunction and need to be fixed or replaced. Here are some of the most common Keurig problems and the parts that are most likely to need replacement:

The Water Tank: The water tank can become cracked or damaged, which will cause the machine to stop working altogether. This part is usually easy to replace and doesn’t require any special tools or skills.

If you’re having trouble with your Keurig 2.0 machine not holding the coffee evenly or leaking, it might be time to replace some of the parts. Here are the most common parts that need to be replaced and what they are used for:

If your Keurig 2.0 is not working or has problems, it’s likely that one or more of the parts are worn out and need to be replaced. In this article, we’ll show you which Keurig 2.0 parts are most commonly replaced, and what replacement parts are most needed.The most common problem with a Keurig 2.0 is the power cord. This cord connects the machine to the outlet, and if it’s not plugged in properly, the machine won’t turn on. If your Keurig 2.0 doesn’t start up at all, the power cord may be the problem.

Another common problem with a Keurig 2.0 is the water reservoir. This part holds water so that the machine can brew coffee. If it’s dirty or corroded, water won’t flow into the reservoir and your coffee will be weak. The water reservoir is usually replaced when it starts to leak or when it becomes discolored from oxidation.Other Keurig 2.0 parts that may need to be replaced include the brew button, drip tray, K-cup holder, and water filter cartridge. Keep in mind that these are just some of the most.

If your Keurig 2.0 is not heating up as it should, it may be time for an element replacement. Keurig 2.0 heating elements are made of a variety of materials, so some may require more specialized replacements than others.Here are the most common Keurig 2.0 heating element replacements and their required parts:- Thermistor: This part senses the temperature of the water and tells the machine how to heat it up. If it is defective, the water will not heat up properly, which can lead to a number of problems with your machine.

If your Keurig 2.0 is not draining properly or you are having trouble with the water pump, it may be time to replace the part. Here are some of the most common replacement parts for a Keurig 2.0:Water Pump: The water pump is responsible for transferring water from the reservoir to the coffee maker. If it becomes damaged, the pump may not be able to transfer water properly, which could lead to a decrease in water pressure and poor coffee brewing.Reservoir: The reservoir holds enough water to brew a single cup of coffee.

Keurig 2 0 machines are popular for their quick, convenient brewing of coffee and other beverages. However, like all appliances, the Keurig 2 0 can eventually need to be replaced parts. In this article, we will discuss some of the most commonly needed replacement parts for a Keurig 2 0.The most common replacement part for a Keurig 2 0 is the machine’s brew group. This component contains the water reservoir and heating element, which helps to make coffee.

If your machine’s brew group starts to wear out or becomes dysfunctional, you will likely need to replace it.Another common Keurig 2 0 replacement part is the carafe. This component holds the coffee during brewing and can eventually become clogged or damaged. If this happens, you will likely need to replace the carafe.If you notice that your machine is not producing as much juice or if it is leaking water, it may be time to replace the filter cartridge or the housing of the internal pump. Both of these components play an important role in ensuring that coffee is brewed properly.

If you are like most people, you probably use your Keurig 2.0 for multiple purposes. You may use it to brew coffee, tea, hot chocolate, or other drinks. You may also use it to make hot dogs and other food items.If you are having problems with your Keurig 2.0, it is important to know how to replace parts. This article will provide information on where to buy replacement parts for a Keurig 2.0 and what replacement parts are most needed.

The keurig 2.0 is a popular coffee machine that is available in a variety of colors and styles. It has a number of features that make it convenient and easy to use.One of the most common problems with a Keurig 2.0 is that the parts that are used to make coffee (the brewing mechanism, the water reservoir, and the heating element) can wear out over time. If these parts are not replaced, the machine will not work properly. It is important to remember that not all Keurigs are created equal. Some models have more components that require regular maintenance and replacement, while others are less likely to need repairs or upgrades over time.

If your Keurig machine is not working or if it is having some other problem, you may need to replace parts. Keurig machines are popular because of their ease of use and their ability to produce coffee quickly and easily. However, Keurig machines can also be expensive to repair or replace parts, so it is important to know which parts need to be replaced most often.The most common Keurig machine problems are caused by broken springs or motor bearings. If these parts are not replaced, the machine will not work properly.

Other common Keurig machine problems include water leaks, clogged filters, and jammed coffee grounds. Here are the four main Keurig machine parts that may need to be replaced: the water reservoir, the brew group (including the water tank and pump), the brew selector lever, and the brewing unit. It is also possible to replace just a few of these parts if they are damaged. For example, you could replace just the brew selector lever if it is broken instead of replacing the entire brewing unit.When you are looking for replacement parts for a Keurig machine, be sure to check the manufacturer’s website or contact customer service for assistance.

There are many different types of Keurig machines on the market, so it can be difficult to know which parts are most likely to need replacement. In this article, we will discuss some of the most commonly replaced Keurig parts and what replacement parts are most needed for those machines.Keurig 2.0 brewers typically require the following parts to function properly: water reservoir, brew unit, K-Cup drawer, brew button, power cord, and display. The water reservoir is the largest and most frequently replaced part on Keurig brewers.

You can replace parts on Keurig replacement parts 2.0 – just be aware that some of the most needed parts are not always covered by the warranty. If you need to replace a part that isn’t covered under warranty, be sure to do your research first and find a replacement part that is compatible with your machine.

Whenever you have a problem with your Keurig coffee maker, it’s good to start with figuring out how to reset your machine. It might be a simple electrical problem or software in the case for newer machines, but in some cases, a quick reset will have you drinking a cup of coffee again in no time.

Sometimes the problems with your Keurig can dissapear simply by opening and closing the lever for the K-Cup container. Yup, it sounds simple enough, but it works sometimes!

Once you’ve let some time pass, re-attach the water tank and plug the machine in. Simply press the On or Start button, and you’ll brew a delicious cup with your trusty Keurig in no time.

If you have the more advanced Keurig 2.0, you might need to do some extra steps in resetting your coffee maker. These machines use digital displays and computer components which means you’ll have to be more meticulous in your approach. Follow the steps below Instead:

Some models like the Keurig B60 or other machines with digital displays have their own steps to reset the machine. If you have one of those coffee machines, just simultaneously press and release the small and medium mug buttons.

Hopefully, you can get your Keurig up and running after these steps but if resetting your Keurig coffee maker doesn’t work, there might be other underlying issues with your machine.

Like with any other coffee maker, your Keurig needs to be properly maintained for it to run in tip-top condition. Sometimes there might be some issues concerning the components or maybe the water reservoir and water lines are clogged.

It’s best to learn the common Keurig troubleshooting and maintenance techniques. Always keep in mind to check the machine’s manual before anything else to help you diagnose the problem.

If you notice that your Keurig coffee machine takes a bit more time when brewing a cup of coffee, it might be because of debris or build-up that’s slowing down your water flow.

You’ll notice this if your coffee tastes terrible, especially if you only use one type of K-Cup for your regular brew. Another telltale sign that there’s a limestone buildup is cloudy water from the dispensing head.

Just place in water and the recommended amount of solution in the water reservoir and let your Keurig run for a brew cycle or two. Afterwards, purge or let your Keurig brew with just water to ensure no solution is left in its lines.

If you’re in a rush, there is also a home remedy you can use. Vinegar water is a good and cheap alternative if you want to descale your coffee maker. It might not be as strong compared to descaling solutions, but it does provide a good band-aid solution for the calcium scaling in your Keurig.

Just mix equal parts of vinegar and water inside the water reservoir and let the machine run until you notice an increased rate with your Keurig coffee maker. Once you’ve depleted the vinegar water, keep purging your coffee maker with fresh water until the smell dissipates.

With that said, these methods are not recommended by the manufacturer so feel free to chime in with the Keurig customer service team to find out the best way to clean the machine’s dispensing line.

This might be due to your water reservoir. Not only do you have to maintain your Keurig’s boiler and water line, but you’ll also need to make sure that your water tank is clean and debris-free.

Detach the water reservoir and wash it thoroughly with soap and warm water. Keep in mind that the tank is not dishwasher-safe, so handwashing is highly recommended. Once you’ve cleaned it sufficiently, dry it using a non-abrasive cloth to avoid any scratches inside the reservoir.

Take note to carefully clean the water filter, as well as it can help in keeping the machine’s line debris free. In some cases, you might need to replace the filter, a good time would be every 3 months, but if you drink more than just a cup a day, every 2 months is highly recommended

Still getting an “add more water” error message? Damn! In this case, it’s best to report it to Keurig’s customer care as there might be an underlying problem with your brewer that only the manufacturer can fix.

Ever found yourself in a situation where your Keurig coffee maker brews room temperature coffee? There might be a problem with its pump or it might be overheated from repeated use.

Like all the other troubleshooting solutions, your Keurig might need some cleaning, especially when there are blockages in the line that can decrease the efficiency of your pump. Ensure that there are no loose grounds along the water lines and brew head of your coffee maker.

If the boiler is still not up to scratch, you can push and hold the machine’s brew button for at least 5 seconds. This resets the pump, making it work at 100% efficiency. Let your Keurig rest for a bit to avoid straining the boiler before brewing your coffee.

You can also either have the “add water” error message listed above, or your pump might need replacement. So take note to keep your reservoir and lines in good condition to avoid any headaches with your brewer.

Your coffee maker is made up of several components that work together to brew your delicious K-Cups. When one of those parts is out of place, your Keurig’s coffee brewing system will not work at all.

Give a quick run-through on your machine before you make your coffee Keurig. One of the common problems with components out of place is the magnetic water reservoirs, so ensure that it is seated properly to avoid any hassles in your morning coffee routine.

In some cases, the boiler also builds up pressure. While this is essential for espresso machines, it’s also critical in the brewing process for your Keurig K-Cafe. This also goes for brewers that have an attached milk frother or steamer as well.

If that fails, some users report that using warm water in the reservoir does the trick as this “jump starts” the boiler. However, Keurig only recommends to only use cold or room temperature water, so if you’re going to try this, do so at your own risk.

Aside from your machine not brewing coffee, you might find yourself in a position where your Keurig doesn’t turn on, or it shuts down unexpectedly. Super annoying!

For newer models, there might be a glitch in the software of the machine. In some cases, it could be from your power supply, and the problem might just be a feature of your Keurig coffee maker that’s left turned on.

Some users report that their Keurig automatically turns off, or it turns on randomly. This stems from the inbuilt timer featured in the brewer. This feature might be enabled when you first get your machine or if it’s switched on by someone in your household.

Keurig Mini: One of the base models from Keurig, this power-saving feature is built into the machine itself which means you won’t have an option to disable it. This also applies to the K-Duo model as well.

You’ll have to take note that the brewer stays turned on for 90 seconds after the brewing cycle. Once it passes the allotted time, you’ll have to press the power button to start it up again. It only takes a few seconds before it’s brew ready as the machine’s boiler remains hot from the previous use.

Keurig Elite: For the Keurig Elite and the K-Select, disabling the auto-shutdown feature is a simple affair. You’ll immediately know if it is enabled if the green indicator for the Auto Off feature is illuminated.

To disable this feature for these models, you’ll have to go through the menu to find the Auto Off programming option. Once you’ve selected, simply press the small cup button multiple times until the screen notifies you that it is turned off.

Usually, once you plug in your Keurig and press the power button, you’ll notice an icon indicating that the machine is working at the lower right corner of the touchscreen. It also comes with a welcome note too.

In some cases, this might not happen, so you’ll have to find out if there is a problem with the Keurig or its display. To check, you can unplug the machine and try it out with a different outlet.

The water tank can also have a problem when your Keurig shuts down randomly. Make sure to steadily affix the reservoir and make sure it stays in place all through the coffee brew cycle as the machine automatically turns off when the tank is taken off.

If there’s still a problem, it might be time to contact Keurig customer care for them to troubleshoot the problem or if your brewer needs replacement.

K-Cup aside, this is also a telltale sign that your Keurig machine needs to be descaled. As we mentioned before, this mineral build-up can greatly change (for the worse) the natural flavors found in your K-Cup coffee.

This is not necessarily a problem exclusive for any Keurig customer. Descaling is essential in all kinds of coffee brewers, whether for home use or a commercial espresso machine.

You’ll also have to replace the water filters that are lined up in the reservoir every so often. Keurig recommends switching filters every two months to get the most out of your cup.

Higher-tier Keurig models tend to give a notification that your machine needs to be descaled. A good rule of thumb to remember is to descale and clean your machine every 3 months.

Another factor is that the puncture needle might be full of debris and coffee grounds. This can block the water going in your K-Cup, leading to a messy affair if left unchecked. Like we stated above, you can use a paper clip to clean out the entrance and exit needles before your brew.

To look up the exact processes for any single model, check out my Complete Guide to Keurig Coffee Makers. In that post I went into painstaking detail about the functionality of every Keurig model I could track down and included a link to its specific user manual.

Don’t forget to wipe down the water entry point at the base of the water reservoir platform, making sure there’s nothing in there you don’t want in your coffee.

Your coffee-less coffee will finish brewing in 30 seconds to 3 minutes, depending on your model. Once it’s done consider the internal components sufficiently rinsed, and you’re ready to begin using your Keurig brewer on a daily basis.

Instead of using a Keurig coffee pod you may elect to use the Keurig My K-Cup reusable pod, which allows you to brew a single serving with your own coffee grounds — no K-Cup required.

Auto-On is a common feature on many Keurig models that lets you set the brewer to automatically turn on. However, it will not automatically brew a cup of coffee. All it will do is pre-heat the brewer so you can wake up, walk over, pop in a pod and brew right away.

Auto-Brew comes on many Keurig carafe models, such as the K200 and up. This mode allows you to prep the brewer with water and a coffee pod for brewing at a later time. Unlike Auto-On, the brewer will actually brew a carafe of coffee at the specified time.

The process below varies from model to model, so check out my Complete Guide to Keurig Coffee Maker Reviews for the specific user manuals of each model.

This particular setting could vary depending on the model you have. The image above shows a common screen, this one specifically from the Keurig K575.Choose your brew size

Once you press AUTO BREW above, you’ll be taken to a screen with a digital clock and some arrows, similar to the image shown above.Select the desired brew time

Keurig coffee makers are finicky machines. Many users complain their brewer failed to last more than a year or two, but generally this is due to poor regular maintenance — you gotta clean these things, people!

Each Keurig user manual has instructions detailing the best way to clean the components of that particular model. That’s the first place you should go when researching regular maintenance.

Almost all Keurig models have some kind of de-scaling notification or indicator light to let you know when it’s time to perform the de-scaling process below.

Honestly, I’d de-scale more frequently than is suggested — at least every 2-3 months. It doesn’t take much time at all and it’ll keep everything working for longer.

As a brand and manufacturer of the now-infamous single-brew coffee maker, Keurig has been around for a while. And like any other product, Keurig coffee makers have their problems too.

It’s only out in the wild while at work or at home where the true tests play out in everyday usage. We’ve had hundreds of comments and emails with user feedback which plays a large role in building this guide about Keurig coffee maker problems.

You’re here because you’re experiencing a problem with your machine. Unfortunately, there are many issues that could be causing your Keurig not to brew.

Keurig coffee makers don’t have reset buttons for users. There are some internal thermal reset buttons, but they are difficult to access and are for a very rare and specific problem.

If you have a specific error, it becomes much easier to solve the problem. The three easier problems to deal with are if your Keurig says to descale, prime, or add water.

Did you drop your Keurig? If not, great! However, sometimes parts can unseat themselves when bumped or moved around on the counter, causing various problems.

You’ll also need to check the needle and brewing area for dirt, leftover coffee grounds, coffee oils, or other debris that has built up. If you notice any of those issues, skip step 4.

The method of flipping your Keurig upside down and giving it a gentle spank on the bottom might work, but it can be dangerous. After all, not everyone has the strength to do that.

If you notice any damage, such as the magnet in the water reservoir not moving because it’s rusted or corroded, then you may need to replace it or the whole reservoir.

When was the last time you gave your Keurig a deep clean? Keurig coffee makers are susceptible to hard water scaling and coffee grounds in places where they shouldn’t be.

To clean your Keurig, you will need to drain it, then take it apart, piece by piece, and clean each separately. You shouldn’t need any tools for this. The needle and brewing area will also need to be cleaned.

To descale your Keurig without breaking your warranty, you should follow the directions for your model and use the approved Keurig descaling solution.

Unfortunately, descaling with vinegar is not an approved method. However, I and many others have done it without issue, and it seems to work pretty well.

If you made it this far without success, then an option is to contact customer service to see if they can help you under warranty. You can contact Keurig customer support at 866-901-BREW(2739).

Struggling with a broken brewer is not a great start to the day. Knowing why your Keurig won’t work might help you understand what’s going on and how to fix it. Here are some issues that can lead to problems:

If you’ve tried all my troubleshooting steps and your Keurig is still not working, here is a list of problems and where to find more information on how to fix your machine.