16x2 character lcd module datasheet for sale

ERMC1602SBS-2 is 16 characters wide,2 rows character lcd module,SPLC780C controller (Industry-standard HD44780 compatible controller),6800 4/8-bit parallel interface,single led backlight with white color included can be dimmed easily with a resistor or PWM,stn- blue lcd negative,white text on the blue color,wide operating temperature range,rohs compliant,built in character set supports English/Japanese text, see the SPLC780C datasheet for the full character set. It"s optional for pin header connection,5V or 3.3V power supply and I2C adapter board for arduino.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and Development Kit at the bottom of this page.

The easiest way would be to stick a transistor inline with the power lead of the lcd and turn it off just before the cpu goes into the low power state.

This product worked great. I wrote a tutorial about manually writing data to the display using dips switches and push buttons. http://volatileinterface.com/2015/05/30/using-a-hd44780-lcd-display-in-4-bit-mode/

Completely useless, I have no idea what happened but when I wire it up according to the tutorial on arduinos site for the Hello World! LCD program, nothing but the backlight comes on. Also the pins are flipped from where they are in the schematic. Total cluster fuck of a product.

I just realized I forgot the bridge connections over the cnter of the breadboard to actually connect the data lines to the LCD. It works now I think I need to adjust the contrast or something. The text on the display is more visible when looking at the display from an angle.

I just bought this and thought it had the HD44780 chipset but now I started looking at the datasheet for the pin interface descriptions and I realize that it has the KS006U chipset? Is the datasheet wrong or is the sparkfun description wrong? Or maybe they are basically the same chipset? I"m confused right now. Do I need to buy a different LCD?

HD44780 is more a standard that a chipset at this point. there are tons of different chipsets that use the same protocols. like how people say "allen wrench" instend of saying hex key. HD44780 is the LCD equivilent of X86 instruction set. the cool think is you can lean how to use the 16x2, and then use the same code on everything from 8x1 to 40x4 displays.

You can simulate data on each pin of the HD44780 compatible LCD and see how it works, or if you are more advanced you can write directly your own scripts in the web browser to control the LCD, same as you would use them in the MCU code

Is there a flat cable assembly available for these? I"m OK using the 0.1" headers, but the electronics I need to hook up requires a cable interconnect. And I"d like it so that I can replace the LCD without desoldering it.

This is a very late response, but anybody in this situation can simply connect the LCD in series with a MOSFET. YOu can then switch the LCD on and off from a microcontroller. Remember to leave all the microcontroller outputs floating because power can still flow into the LCD if you keep these in certain states.

I am using the exact components and have followed the exact pin configurations for the past 2 weeks, connecting then reconnecting, I have also tried different FTDI cables for uploading onto the Arduino pro mini. BUT have had no success, PLEASE help me as it is a basic issue I am sure but cannot find the solution, My 16*2 LCD lights up and also when I upload a program the arduino page reads that it has successfully uploaded (Done Uploading).

We"ve had customers order face plates through Ponoko for these LCDs and be pretty happy with it. Check around on the comments on other products and on the forum. You"ll probably find a lot of different examples of mounting solutions.

can this run in 8bit mode? I"m trying so hard to just wire up the 8 data lines and manually send the bits required for certain symbols. But it"s either stuck in 4bit mode, or I"m completely lost. My program is simple and I KNOW that it is sending the 1"s and 0"s down the appropriate lines but I can"t get a response at all. And I can succesfully apply the example code for liquid crystal. In class we just banged some bits into those old lcd"s and got the expected response... Is this one more advanced or something? Thanks, I really appreciate any help.

No matter what line I set the cursor at using lcd.setCursor(0,0), or lcd.setCursor(0,1), it will print everything on line 0. I"ve used the same LCD, different size before and never had this issue.

You should make the LCD"s connection pins on the bottom, like on the RGB backlit LCD"s (https://www.sparkfun.com/products/10862). I like standing them straight up and down on breadboards. If I tried that with this one, it would be upside down.

I"m having a problem with this lcd, I can"d print custom caracters, I tried the code that this site http://icontexto.com/charactercreator/ gives you when you create a custom char, tried some other examples, but nothing, I always get just two vertical bars on the second and fourth columns.

I love this little LCD! It works great. However, I"m having a wicked hard time finding hardware (i.e. self-clinching PEM stud) that I can use to mount this. The 2.5mm mounting holes are pretty small. I"m trying hard not to use glues.

I"m having problems with my contrast - it"s always either too high (washed out characters) or too low (can"t see the character) on separate spaces at the same time. No matter how I adjust it, each character seems to require a different contrast level. Help, please?

I"m also having trouble with LCD. I hooked up at 10kOhm pot, but when I upload the code it just gives me random pixels and characters. Is my Atmega on my Arduino Uno shot?

Also no external resistor is needed for the backlight; just like almost all other 5v character LCDs this one has a series resistor right on the board. Mine is 130 ohms.

I was able to achieve much better contrast by applying a slightly negative voltage on the Vo pin (3). Minus 200 mV did the trick. I seem to remember that LCD"s used to have a negative output for just this reason. I don"t know what the rating of this pin is, so proceed with caution.

I made it work by using the same schematic featured in the LiquidCrystal Arduino library page, except LCD pin 6 is hooked to a digital PWM instead of a potentiometer for controlling contrast.

Pretty cool little LCD. I had some problems initially with the 4bit LCD library, but after finding that the standard LiquidCrystal library supports 4-bit data lines it worked great.

The one thing that threw me off was that the standard (not extended) datasheet mentions that the backlight (BKL) can be driven by pins 1,2 or 15,16 -- however I found that I needed to apply 4.2v to pins 15,16 before the backlight would work. Easy fix, just misleading on the datasheet.

Have you wired in the backlight? That tutorial doesn"t include wiring pins 15 and 16 on the lcd. I have hooked the backlight up to a pwm output so that I can turn it on and off via sketch.

I am also ahving this same problem. The LCD was great and easy to set up, but the brightness is really really poor. I installed a pot and all, but no dice.

Has anyone got this working with the LiquidCrystal or LCD4bit library? I am having quite a bit of trouble getting it to work reliably and am at the point where I am going to try and code my own library for it.

I"m also having heaps of trouble. I can sometimes get it to display text, maybe once out of every 30 attempts. And IF it decides to display anything it ends up garbling the message and locking up, not displaying the other strings in the sequence. Is this the LCD, my Arduino or the library? I tried using LCD4bit and a modified LiquidCrystal and they all yield the same, frustrating results.

Great little lcd, for basic output, debugging etc. Very easy to interface, and looks very slick! If you need a basic no frills LCD, this is a good buy.

This is a basic 16 character by 2 line display. Black text on Green background. Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Using the very common Sumsang KS0066 parallel interface chipset which is equivalent of Hitachi HD44780. Includes LED backlight.

The Displaytech 162M series is a lineup of our largest 16x2 character LCD modules. These modules have a 122x44 mm outer dimension with 99x24 mm viewing area on the display. The 162M 16x2 LCD displays are available in STN or FSTN LCD modes with or without an LED backlight. The backlight color options include yellow green, white, blue, pure green, or amber color. Get a free quote direct from Displaytech for a 16x2 character LCD display from the 162M series.

If you fear you"re lost in unknown resistance land, my LCD worked best when the 10.7k (max resistance) pot has 9.888k between + and LCD"s "V0" and .828k between - and LCD"s "V0".

RC1602C is a 16x2 character type LCD display with module dimension 85.0 x 36.0 mm. This monochrome display LCD 16x2 has built-in IC ST7066. Default interface of RC1601A module is 6800; if you require interface such as SPI or I2C, they’re available as well, but the IC will be replaced with RW1063.

Raystar provides various LED backlight combinations for RC1602C 16 character x 2 lines LCD display module, such as yellow-green, green and white. You can choose module with LED backlight or without it.

This RC1602C display LCD 16x2 offers a selection of fonts, including English/Japanese, Europe and Cyrillic (Russian), etc. Feel free to contact us if you need full datasheet or more info of this display lcd 16x2.

Abstract: 16x2 lcd HD44780 hitachi 16x2 lcd LCD ASCII CODE 16x2 LCD ASCII table CODE 16x2 HD44780 16x2 16x2 lcd HD44780 16x1 LCD command lcd display 16x2 LCD display module 16x2 HD44780

Text: character LCD display that is fitted with a Hitachi HD44780 controller. This 16x2 character LCD uses the , a Typical HD44780-Based Character LCD Module Liquid Crystal Display ( LCD ) is a very useful , The display data RAM (DDRAM) of the Character LCD Module stores the data to be displayed, and is , between DDRAM addresses and positions on the display module for a 16- character x 2-line LCD are displayed , Related DDRAM Address for a 16x2 LCD Character Generator ROM Busy Flag The LCD Module "s HD44780

Abstract: lcd 16x2 instruction set 24 pin diagram of lcd display 16x2 16X2 LCD TIMING CHARACTERISTICS 16x4 LCD ddram STN negative Blue 16X2 lcd display TC162F 16 pin diagram of lcd display 16x1 16X4 LCD CHARACTER CODE Okaya Electric Industries

Text: . Handle with care. • Do not remove the panel or frame from the liquid crystal display module . ( LCD module ) • Do not soil or damage LCD panel terminals. • Keep the display surface clean. Do not touch , MPU -» LCD Module ■1": Read MPU «- LCD Module E I Operation start signal for data read or write , "s NORMAL TEMP (+5VDC) WIDE TEMP (±SVDC) LCD v Module O vDD-VO VR 10KQ - 20KQ VDD LCD v Module SS vO , ), and blink of cursor position charact character (B). 40nS Cursor/ Display Shift 0 0 0 0 0 1 S/C R/L

Abstract: 16x2 Text LCD optrex lcd display 16x2 16207 LCD display module 16x2 characters block diagram of lcd display 16x2 LCD MODULE optrex 16x2 driver lcd 16x2 LCD display module 16x2 optrex user manual

Text: driver required for a Nios® II processor to display characters on an Optrex 16207 (or equivalent) LCD module , see the manufacturer"s Dot Matrix Character LCD Module User , SOPC Builder In SOPC Builder, the LCD controller component has the name Character LCD ( 16x2 , altera_avalon_lcd_16207_regs.h file describes the register map, and the Dot Matrix Character LCD Module User , programs access the LCD controller as a character mode device using ANSI C standard library routines

Abstract: TC202A HEADER RT TC162C 16x1 LC display 16X2 LCD TIMING CHARACTERISTICS 16X2 LCD CHARACTER CODE 24 pin diagram of lcd display 16x2 lcd display 16x2 instruction set Okaya lcd

Text: display module . ( LCD module ) · Do not soil or damage LCD panel terminals. · Keep the display surface clean , MPU LCD Module "1": Read MPU LCD Module Operation start signal for data read or write Data Bus of , blink of cursor position charact character (B). Moves the cursor and shifts the display without changing DDRAM contents. Sets interface data length (DL) number of display lines (N) and character font (F) Sets , DDRAM or CGRAM Description Display Data RAM Character Generator RAM CGRAM Address DDRAM Address

Abstract: 16x2 LCD Panel Display optrex lcd display 16x2 16x2 Text LCD Datasheet Lcd 16x2 16x2 Dot Matrix Character Display Driver driver lcd 16x2 lcd module 16x2 16x2 lcd VT100 manual

Text: (or equivalent) LCD panel. Device drivers are provided in the HAL system library for the Nios II processor. Nios II programs access the LCD controller as a character mode device using , an Optrex LCD module and provide several ready-made example designs that display text on the Optrex , Matrix Character LCD Module User"s Manual available at http://www.optrex.com. This chapter contains the , altera_avalon_lcd_16207_regs.h file describes the register map, and the Dot Matrix Character LCD Module User

Abstract: LCD display module 16x2 characters HD44780 16x2 lcd HD44780 hitachi 16x2 lcd datasheet hitachi 16x2 lcd lcd 16x2 instruction set HD44780 16x2 LCD ASCII CODE 16x2 16X2 LCD CHARACTER CODE LCD ASCII table CODE 16x2

Text: correspondence between DDRAM addresses and positions on the display module for a 16 character x 2 line LCD is as , . . . . . . . . . . . . . . . . . . . . . . . . . 2 Character LCD Module . . . . . . . . . . . . . , . . . . . 7 Flowchart-Initializing the HD44780 Controller on the 16x2 LCD Module . . . . . . . . , Descriptions of a Typical HD44780-based Character LCD Module . . . . . . . . . . . . . . . . . . . . . . . . . , x 2 character LCD display . This 16 x 2 character LCD uses the industry-standard 4-bit data transfer

Text: Optrex Numbering System DOT MATRIX Type LCD Modules DMC ­ 50000 N Y H U ­ S E B 1 Standard Pin Connections Pin No. Symbol Pin No. OPTREX CORPORATION HIGH CONTRAST LCD MODULE FEATURES , programming: clear display , cursor at home, on/off cursor, blink character , shift display , shift cursor , 7 1 Symbol 14 DB7 1. Type of Display : 2. Development Number: 3. LCD TYPE: 4 , special characters can be displayed by built-in character generator (ROM). · Other preferred characters

Text: interface Data CU20027-YX1A 20x2 LCD footprint and brightest Vacuum Fluorescent Display (VFD) module , 16x2 32 25 50 20 x 2 LCD footprint Brightness comparison (Cd/m2) CU20027-YX1A, Series Available interfaces CU22042-Y1A 22x4 characters in 16x2 LCD footprint. 8 bit parallel , - Select from 1x1, 1x2, and 2x2 character sizes - More characters in compact display size - 1U , : noritake-vfd.com/yseries.aspx VFD module with color filter Part Number Number of Characters Character

Abstract: 16 pin diagram of lcd display 16x2 24 pin diagram of lcd display 16x2 E912112012 16X2 LCD CHARACTER CODE OSD1602M03 PDC1602M 10 pin diagram of lcd display 16x2 osd1602 16x2 lcd 4-bit

Text: OSD1602M PLED 16x2 Characters Module OSD1602M03 Specifications Date: 2004/3/1 Revision: 3.31 Document NO:E912112012 Revision: E0 Page 1 of 15 PLED 16x2 Characters Module OSD1602M03, ratio and wide viewing angle Compatible with LCD 16x2 type Controller is compatible with HD44780 2 , character Moves cursor & shifts display without changing DDRAM contents 1.52ms RS R/W D7 D6 D5 D4 D3 , 37us 37us Sets interface data length (DL) Sets number of display lines (N) Sets character font

Abstract: 16 pin diagram of HD44780 lcd display 16x2 16x2 lcd method LCD display module 16x2 characters HD44780 16 pin diagram of lcd display 16x2 LCD ASCII CODE 16x2 16x2 lcd HD44780 HITACHI HD44780 DOT MATRIX LCD MODULE hitachi 16x2 lcd LCD display module 16x2 HD44780

Text: · This Application Note provides Character Liquid Crystal Display ( LCD ) driver routines (coded , character LCD display . This 16 x 2 character LCD uses the industry-standard 4-bit data transfer mode. With , features of its display . An LCD with a controller is referred to as an LCD module . The following section describes one such LCD module . Character LCD Module The Character LCD Module used to demonstrate , ) · Busy flag Pin Description The Character LCD Module , with its onboard HD44780 controller

Text: sales@p-tec.net Tel: Fax: (719) 589 3122 (719) 589 3592 PC1602A-L( 16x2 ) Character LCD Display , ( 16x2 ) Character LCD Display Absolute Maximum Ratings at TA = 25 °C Features *16 Character , 2 Line , sales@p-tec.net Tel: Fax: (719) 589 3122 (719) 589 3592 PC1602B-L( 16x2 ) Character LCD Display , PC1602C-L( 16x2 ) Character LCD Display Absolute Maximum Ratings at TA = 25 °C Features *16 Character , 2 , ( 16x2 ) Character LCD Display 80.0± 0.5 2.5 8.0 2.54x15=38.1 1.8 16-Ø1.0 2.0 4-Ø2.5 8.8

Abstract: 16 pin diagram of lcd display 16x2 hd44780 16x2 lcd keypad 4x4 24 pin diagram of lcd display 16x2 LCD ASCII CODE 16x2 16 pin diagram of HD44780 lcd display 16x2 display 16x2 lcd 16x2 instruction set 4x4 keypad to bcd

Text: , and the Character LCD module . Keypad (4x4) eZ80F91 MCU Port B Port C LCD Display ( 16x2 , DB6 13 DB5 12 DB4 11 RS Character LCD Module ( 16x2 ) 4 RD 6 WR 3 , Module 4x4 Keypad 16x2 Character LCD Module fitted with a Hitachi HD44780 controller Test Procedure , connected to the Character LCD module that displays the time and date. Port B of the eZ80F91 MCU is , Real-Time Clock of the eZ80F91 MCU 6 RTC Module Keypad Module LCD Display Module Central

Abstract: keypad 4x4 lcd module 16x2 pin architecture of lcd display 16x2 hitachi 16x2 lcd datasheet 16 pin diagram of HD44780 lcd display 16x2 16 pin diagram of lcd display 16x2 datasheet keypad 4x4 LCD ASCII CODE 16x2 24 pin diagram of lcd display 16x2

Text: DB4 11 RS Character LCD Module ( 16x2 ) 4 RD 6 WR 3 5 FNC 1 GND , with the eZ80F91 Module , the keypad, and the Character LCD module . The following section discusses , of the eZ80F91 MCU Keypad (4x4) eZ80F91 MCU Port B Port C LCD Display ( 16x2 ) Figure 1 , connected to the Character LCD module that displays the time and date. Port B of the eZ80F91 MCU is , Module Keypad Module LCD Display Module Central Repository Data manipulation Figure 4

Text: Av display ABC016002C Series 16x2 characters 1/16 DUTY,1/5 BIAS OUTLINE DIMENSIONS Unmarked , LEDK CONTROL LSI SPLC780A or KS0066 LCD Panel Backlight LCD MODULE ï VDD(+5.0V) Vo VR(0 , ) FEATURE Module Size (W*H*T) 122.0x44.0x13.0 LCD Type STN. TN. HTN. FSTN View Area (W*H) 99.0x25.0 LCD Colour STN:Yellow-Green. Gray 0ther:Gray Character Pitch(VTH) 6.00x10.34 View Angle 6 O"clock. 12 O"clock Character Size(W* H) 4.84x9.66 Display Type Positive Type. Negative Type Character Font 5x8 Rear

Abstract: Display LCD 20x4 display module lcd 4x20 radio shack baud WR232Y02 20X4 standard values of Lcd 16x2 to microcontroller pin architecture of lcd display 16x2 16x2 display display lcd 16x2 232

Text: SPI_CLK SPI_BUSY Crystalfontz Display Function Ground (backlight and controller) Controller and LCD , supply greater than 5.25 volts to Vdd or LED+. Damage to your LCD module will result. To use the , 16x2 intelligent serial interface display command set This document corresponds with firmware v1 , "Control Q" followed by one byte for the column (0-19 for a 20x4 display , or 0-15 for a 16x2 display ), and , , so the maximum value of length for a 20x4 display is 20*6=\120. For a 16x2 , the maximum value is 16

Abstract: ABC016002 ABC016002A LCD display module 16x2 characters 16 pin av 16x2 lcd hy-1602 16x2 LCD Panel Display LCD display module 16x2 characters 16x2 lcd block diagram .44 Russian

Text: Av display ABC016002A Series 16x2 CHARACTERS 1/16 DUTY,1/5 BIAS OUTLINE DIMENSIONS +1 o +1 , KS0066 coml6 . -—T^— LCD Panel -r-1/ \ seg80. LCD MODULE 1 VDD (+5. 0V) Vo VR(0~20K) VSS(OV) LEDA (+5. 0V) LEDK(0V) MECHANICAL SPECIFICATIONS & FEATURE Item Normal Dimensions(mm) FEATURE Module Size (W*H*T) 80.0x36.0x9.3 , Display Type Positive Type, Neagtive Type Character Font 5x8 Rear polarizer Transmissive, Reflective

Text: Fluorescent Display (VFD) module and available in 16×2, 20×2, 20×4, 24×2, 40×2, and 40×4 character format. Compared to LCD , U Version VFD module is a bright and vibrant emissive display which makes it , Format Part Number Character Height (mm) Display Size (mm) PCB Size (mm) Weight (g , Will be discontinued Part Number Character Height (mm) Display Size (mm) PCB Size (mm , Will be discontinued Part Number Character Height (mm) Display Size (mm) PCB Size (mm

Abstract: Display LCD 20x4 LCD ASCII CODE 20x4 pin diagram of serial lcd display 16x2 LCD 16X2 5V RS232 Driver LCD ASCII table CODE 16x2 explanation of 16x2 LCD lcd display 2x16 software command 16X2 LCD CHARACTER CODE display lcd 16x2 232

Text: VDD or LED+. Damage to your LCD module will result. To use the backlight, connect a regulated 5v , ) Crystalfontz America, Incorporated 20x4 (634) and 16x2 (632) intelligent serial interface display command set , the "Connecting Your LCD " section above. Display Control Codes ASCII Keystrokes Function , shown on the display . The boot screen will clear automatically after about 5 seconds. If a character is , ) The User Boot Screen is recalled from the EEPROM and shown on the display . When a character is

Text: Av display ABC016002B Series 16x2 CHARACTERS 1/16 DUTY,1/5 BIAS OUTLINE DIMENSIONS +1 ° ; CO , KS0066 coml6 . - LCD Panel -r-1/ \ seg80. Backlight LCD MODULE 1 TOD (+5. 0V) Vo VR(0~20K) VSS(OV) LEDA (+5. 0V) LEDK(OV) MECHANICAL SPECIFICATIONS & FEATURE Item Normal Dimensions(mm) FEATURE Module Size (W*H*T) 80.0x36.0x9.3 , Display Type Positive Type, Neagtive Type Character Font 5x8 Rear polarizer Transmissive, Reflective

Abstract: PLED 16x2 Characters Module PDC1602M03 lcd 16x2 instruction set PDC1602 HD44780 16x2 3v PDC1602M03 1602l 16x2 LCD Panel Display lcd display 16x2 instruction set 16 pin diagram of lcd display 16x2 hd44780

Text: . Low power consumption 3. High contrast ratio and wide viewing angle 4. Compatible with LCD 16x2 type , Sets entire display (D) On/Off Sets cursor (C) On/Off Sets Blinking (B) of cursor position character , DDRAM: Display Data RAM CGRAM: Character Generator RAM ACG: Character Generator RAM Address ADD , LINES AND CHARACTER FONT CANNOT BE CHANGED AFTER THIS POINT. DISPLAY OFF END OF INITIALIZATION , (INTERFACE IS 4 BIT LONG. SPECIFY THE 0 0 0 0 0 1 NUMBEROF DISPLAY LINES AND CHARACTER

Abstract: Display LCD 20x4 pin diagram of serial lcd display 16x2 16x2 serial lcd 20X4 LCD display display 16x2 datasheet 20x4 characters Display Driver explanation of 20x4 LCD led scrolling display lcd display 2x16 software command

Text: VDD or LED+. Damage to your LCD module will result. To use the backlight, connect a regulated 5v , ) Crystalfontz America, Incorporated 20x4 (634) and 16x2 (632) intelligent serial interface display command set , the "Connecting Your LCD " section above. Display Control Codes ASCII Keystrokes Function , shown on the display . The boot screen will clear automatically after about 5 seconds. If a character is , ) The User Boot Screen is recalled from the EEPROM and shown on the display . When a character is

Abstract: PLED 16x2 Characters Module PDC1602M03 PDC1602 PDC1602M03 lcd 16x2 instruction set HD44780 16x2 3v 16*2LCD 16 pin diagram of lcd display 16x2 hd44780 HD44780 16x2 lcd 16x2

Text: TitlePLED 16x2 Characters Module PDC1602M03 System Products EL Dept. TA Issue Date 2002.10.16 , . Low power consumption 3. High contrast ratio and wide viewing angle 4. Compatible with LCD 16x2 type , Blinking (B) of cursor position character Moves cursor & shifts display without changing DDRAM contents , length (DL) Sets number of display lines (N) Sets character font (F) 1 ACG ACG ACG ACG ACG ACG Sets , RS R/W D7 D6 D5 D4 D3 D2 D1 D0 DDRAM: Display Data RAM CGRAM: Character Generator RAM ACG

Text: Overview The PmodCLP is a 16x2 character LCD module that uses two Pmod connectors to present a 3.3V, 8 , PmodCLP™ Parallel LCD Display Module Reference Manual Revision: April 28, 2008 ® ww w. d , incremented after each read or write operation. The LCD display uses ASCII character codes. Codes up through , (or equivalent) LCD controller. The module can be attached to any number of Digilent system boards to create a character LCD subsystem. The PmodCLP can be supplied with 3.3V or 5V. Because the

Text: Equipment Character L C D Module System Control LCD-E LCD "I HD44780^£1 Drive LSI Drive LSI , LCD 7Y MPU Segment Display LCD Module · LM039· LM058· LM 018L E ! - i , ^ H IT A C H I" UQUIDCRYSIAL DISPLAY MODULES AND DEVCES The Clear Advantage In LCD Technology 4 , : LCD Modules-These consist of the liquid crystal display plus built-in driver circuitry. Some also include built-in controllers. Graphic LCD M odules. page 8 Character LCD Modules . . . . page

Text: SW1-SW4 enables various on-board peripherals. 16x2 character LCD display . Potentiometer for LCD , . BigPIC5 MCU card supports 64 and 80-pin PIC microcontrollers. Graphic LCD display (GLCD). Touch , and GND pins. 12-bit D/A converter module . RS-485 communication module . 67 LEDs for I/O pins state monitoring. CAN communication module . 4.096V precise reference voltage source. MMC/SD

This 2×16 character LCD Module with BLUE Backlight uses an I2C interface to communicate with the host microcontroller. This budget-conscious LCD is used on projects requiring the display of text, data, or ASCII characters of all types. Connect to Vcc, Gnd, SDA (serial data line), and SCL (serial clock line). This is a 5VDC device and will be found on the I2C bus at address 0x27 / 0x3F.

WH1602J is a medium/small LCD Module which is built in with ST7066 controller IC; its default interface is 6800 4/8-bit parallel. This display is also available in SPI and I2C interface by using RW1063 controller IC. WH1602J is available in several different backlight colors including blue, green, white, yellow-green, amber, red, white LEDs. There are different character fonts/texts available for ST7066 IC including English/Japanese, English/West European, English/Scandinavian European, or English/Cyrillic (Russian) as options.