elecrow rpa05010r hdmi 5-inch 800x480 tft lcd brands

Now we have this 5-inch TFT display with a touch screen that can provide a high-resolution picture and a large viewing screen for your Raspberry Pi. The display supports any revision of Raspberry Pi and works perfectly for Raspberry Pi B+/ 2B/ 3B. It is the low power consumption for the backlight of the screen. The high 800 x 480 resolution can give you a full-color experience, the touch screen allows users to play easily.

This is a 5 inch mini HDMI resistive touch screen with 800*480 resolutionfor Raspberry Pi, the high resolution will provide a large viewing screen for Raspberry Pi. Compared with another type of 5-inch display for Raspberry Pi, the backlight of this 5-inch display can be controlled by Raspberry Pi GPIO pin 11. Generally, the backlight is on, then input a high level, and it will turn off. The Pin 11 control a MOS tube switch on or off, the MOS tube switch will enable and disable the EN end of the backlight power IC. This design makes it convenient to control the backlight when we put the display into a product and safe power at the same time.

This 5 inch TFT Display with Touch Screen is a mini panel-mountable HDMI monitor. So small and simple, but you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a electronic product. Although the 800x480 common HDMI display is made for Raspberry Pi, we can use it other where not only for Raspberry Pi.

The resolution of the LCD display is 800 x 480, you can configure the resolution via software, and the maximum resolution it supports is 1920 x 1080. It is a USB capacitive touch screen and does not require a driver. It supports five touch control, besides that, the LCD screen comes with an OSD menu adjustment function. You can adjust the contrast, brightness, and switch button. There are 9 interfaces on the back of the screen, one earphone for audio output; two touches (USB connector), for power supply and touch output; one display, an HDMI interface, for connecting the motherboard and LCD display. One power, it can control the backlight to turn on and turn off to save power. One return, it’s only useful in the OSD menu. One right/down, backlight shortcut key. One left/up, backlight shortcut key. A menu, it’s useful in the OSD setting menu, open the OSD/ select key.

Elecrow RPA05010R HDMI 5-Inch 800x480 TFT LCD Display with Touch Screen Monitor. Elecrow RPA05010R HDMI 5-Inch 800x480 TFT LCD Display with Touch Screen Monitor for Raspberry Pi B+/2B/3B 5 inch HDMI display monitor with high resolution picture and large viewing screen Resolution: 800x480 LCD Display with touch function, 5 inch, back light control to lower power consumption. Large viewing angle, fast response time, full color display. Could provide the driver for Raspberry Pi 2B B+ Raspberry Pi 3B. Supports any revision of Raspberry Pi and working perfect for Raspberry Pi B+/2B Raspberry Pi 3B etc. Track Page Views With Auctiva"s FREE Counter

Buy Elecrow RPA05010R HDMI 5-Inch 800x480 TFT LCD Display with Touch Screen Monitor for Raspberry Pi B+/2B/3B online at a discounted price from ShopClues.com. Shop Laptop Accessories products @ Lowest Prices. Shop now! Enjoy Free Shipping & COD across India. EMI options available with Easy Return/Replacement Polices.

I"ve been looking around for a small HDMI LCD screen to use as a seconday screen with Windows and it took a few months of research on and off before deciding on the Elecrow 5" HDMI monitor. For the most part, it took me a while because a lot of reviews here and on other sites were primarily about use and config with Raspberry Pi.Thanks to reviewer Alan who gave a good review with plenty of photos that convinced me to go for it. Not sure if it"s just how Amazon stores user review videos but the video review was a bit pixelated so it was hard to appreciate the clarity of the screen but it seemed to be what I was looking for.Having used it for a few months now I still can"t believe how clear and sharp the screen is! There are sadly no controls for brightness, colour, saturation or contrast but everything displayed looks very nice and accurate.Usually when you see the resolution 800x480 you think how bad that looks when your PC doesn"t have the right drivers installed and it looks blocky. I know it"s all relative and about DPI but once I had it all connected and tested it was sharp and clear, almost HD. I wish I had bought one sooner as it is exactly what I was looking for having tried a Lilliput monitor.As I"m using this with Windows, I"ve not needed to look through the included driver utility disc and not tried the resistive touchscreen so I can"t comment on those. Windows just detects it as a second display and lets me extend my desktop. No drivers needed. The box contains the LCD screen, a HDMI bridge connector that neatly connects the HDMI socket on the top of the screen to the HDMI socket on the Raspberry Pi when mounted together. Standoffs for mounting are also supplied plus a plastic stylus.Here are some of the good points that I like:+ It shows the video feed straightaway without any fancy splash screens or slow initialisation pauses. This was one of the annoyances with Lilliput monitor was a slow bright blue screen on power on before it would think about showing the feed. I know it"s only a few seconds but I specifically wanted instant feed on power on for future uses.+ Runs off a single micro USB (socket also at the top next to HDMI socket) connected to PC USB so no additional external power adapters or sockets needed. It powers down whenever my PC is scheduled to power down so no lingering standby. Some motherboard USB ports do still continue to supply power for charging devices so your experience may differ.+ I was hoping for an on/off switch but no it only has a backlight switch which I wasn"t sure about to begin with but I"ve since found it very useful and better. I was thinking about buying a micro USB cable designed for Raspberry Pi with an inline power switch built in but for now the brightness switch is fine. As a blessing in disguise, it prevents Windows/DirectShow from blinking all screens when it realises a monitor has been disconnected, that blink would often cause the video on my TV app to freeze. Turning off backlight doesn"t cause DirectShow to have a fit.+ Small and light enough that I have it attached to a gooseneck arm so can position it how I need. I was going to buy one of those mobile phone gooseneck arms but I kept reading reviews of some not even being able to cope with weight of a smartphone without drooping so I"ve used a photographic gooseneck clamp which is a bit overkill but no droop!- The only negative I can think of is the availability or lack of screen cases with cutouts to suit the position of the HDMI and USB sockets on this. The Elecrow has its HDMI and USB socket at the top edge of screen and nearly all cases I have looked at are designed for screens with HDMI and USB on the right edge. I"ve had to import one from China that had the cutouts for this screen. Took about 2 weeks to arrive. Wish I"d have ordered two cases at the same time to avoid the wait as I"m impressed with the clarity of Elecrow I hope to buy another one in near future.! Just one more thing Columbo! I had originally wanted to buy Revision B of this screen with capacitive touch screen because it has OSD menu buttons. I can"t find any manuals but I"m hoping that OSD buttons allows settings for brightness as that was my other preferred criteria. Having said that, I think it would be even more impossible to find suitable case due to the positions of sockets and extra menu buttons on Revision B screen. Maybe Elecrow could provide some insight on available cases?To solve the lack of brightness control I have just used a pieces of tinted acetate so that lessens the brightness if I"m using at night.

5 inch HDMI display monitor with high resolution picture and large viewing screenResolution: 800x480 LCD Display with touch function, 5 inch, back light control to lower power consumption.Large viewing angle, fast response time, full color display. Could provide the driver for Raspberry Pi 2B B+ Raspberry Pi 3B.Supports any revision of Raspberry Pi and working perfect for Raspberry Pi B+/2B Raspberry Pi 3B etc.