custom lcd display az quotation

Please complete the quote response form with as much information as you have readily available. If your LCD display is based on an existing design you can skip this step and attach any documentation that you may have, or simply list the manufacturers part number of the display that you are currently using. Either way, our engineering design team will quickly evaluate your information, help to fill any holes, and quickly get you an accurate quote for your specific display needs.

Phoenix Display International specializes in creating custom LCD displays for clients in a variety of business sectors. Our expert engineering team has extensive experience in creating custom displays based on your project’s final application, and will handpick and customize an LCD display module to fit the exact specifications of your project or product. In the process, we’re often able to create efficiencies and offer superior customer service that other LCD Screen manufacturers simply cannot, or will not, provide.

The process of designing your custom LCD display solution begins at our company headquarters, located in Phoenix, Arizona. Our team of engineers starts by taking a deep dive into your project, getting to know the product inside and out, learning the specifics, parameters, and end-use application. Based on this knowledge, we’re able to define or design the ideal LCD display, whether it is a character LCD display, a graphic LCD, a color LCD screen, or a completely custom LCD display solution.

From there, our team will design a custom electrical and mechanical interface for your LCD display, engineering in any extras your project may need, including controllers, converters, or touch-sensitive screens.

To learn more about our custom LCD displays and custom TFT displays, or to get a 24-hour quote for your project, contact Phoenix Display International today.

Many Size Options – Flexible design requirements allow for a wide range of size options for custom glass LCD. Designs can be as small as 1.5″ and as large as 10″.

Very Fast Tooling Process – Concept to Production as fast as 12 weeks – Tooled samples delivered in as little as 4 weeks. Once customer provides drawing to sales@azdisplays.com , we can have a proposed design within in 1-2 days.Proposal Design

If you don’t have a drawing already, you can download the Design Sheet and return to sales@azdisplays.com or contact an engineer for technical support at 949.360.5830

NHD-12864AZ-FL-YBW | Monochrome Graphic Module | 128x64 Pixels | Transflective LCD | Yellow/Green Backlight | STN (+) Positive Yellow/Green Display | Non-Stocked

Newhaven 128x64 graphic Liquid Crystal Display module shows dark pixels on a bright yellow/green background. This transflective LCD Display is visible with ambient light or a backlight while offering a wide operating temperature range from -20 to 70 degrees Celsius. This NHD-12864AZ-FL-YBW display has an optimal view of 6:00, operates at 5V supply voltage and is RoHS compliant.

Easily modify any connectors on your display to meet your application’s requirements. Our engineers are able to perform soldering for pin headers, boxed headers, right angle headers, and any other connectors your display may require.

Choose from a wide selection of interface options or talk to our experts to select the best one for your project. We can incorporate HDMI, USB, SPI, VGA and more into your display to achieve your design goals.

Manufacturer of standard and custom display equipment for OEMs, design houses, and distributors. Types include character, graphic, TFT, and VATN displays. Available in various models, specifications, and features. Custom field sequential color (FSC), segment, excellent black technology (EBT), and resistive and capacitive touch panel displays are also offered. Provides engineering and design assistance, technical customer support, expedited prototyping, and low MOQ builds.

Focus Display Solutions, Inc. (also known as Focus LCDs) is a US-based company, headquartered in Chandler, Arizona. The company was started with one engineer, one customer, and one LCD in 2000. Since then we have grown to supply custom and standard display solutions to a growing customer base of:

Since 2000, all we have done are displays, not PCBs, transformers, power supplies or relays. We live, breath and supply only display technology. You"ll have display experts at your disposal.

For over a decade, we have held to our original goal of focusing on support for you, our customer, with quick response time to your questions, quotes, and deliveries. We are there when you need us. We don"t just build displays we build relationships.

Customers demand face-to-face support. That is why our representatives and distribution partners have a proven record of LCD support and service. Less

Many Size Options – Flexible design requirements allow for a wide range of size options for custom glass LCD. Designs can be as small as 1.5″ and as large as 10″.

Very Fast Tooling Process – Concept to Production as fast as 12 weeks – Tooled samples delivered in as little as 4 weeks. Once customer provides drawing to our design team, we can have a proposed design within in 1-2 days.

Many Size Options – Flexible design requirements allow for a wide range of size options for custom glass LCD. Designs can be as small as 1.5″ and as large as 10″.

Very Fast Tooling Process – Concept to Production as fast as 12 weeks – Tooled samples delivered in as little as 4 weeks. Once customer provides drawing to our design team, we can have a proposed design within in 1-2 days.

Ocular LCD Displays is the latest LCD supplier to pull out of the display market. Consequently, we have been contacted by people asking us for replacement displays once supplied by Ocular USA Displays.

Ocular LCD Displays has moved towards chapter 7. They were located in Texas and began business in 1986. It looks like they ceased delivering displays in mid-November of 2014.

Focus Displays Solutions has been in the LCD business for over fourteen years, in that time we have focused on custom LCDs and replacement LCDs for Ocular USA, Seiko LCDs and Standish Displays.

We not only sell replacement displays, but offer US-based technical support to provide quick responses and US-based inventory. In many cases we can ship you samples the same day you call.

This is not only true for discontinued Ocular LCD Displays, but for LCD suppliers that are still in business, but have discontinued a specific LCD product line.

Whether the LCD has been discontinued by Ocular LCD Displays, Seiko, Standish or other LCD suppliers, Focus Displays has been carrying inventory and offering reverse engineering support to help customers quickly located inventory for their display.

Our technical support people may be able to offer an off-the-shelf standard display with a short lead-time or even zero lead-time. If your Ocular LCD display was a custom, we are able to design and build a solution from your data sheets or from an actual display module.

Focus Displays holds inventory in our Chandler, AZ warehouse and can offer many equivalent displays from stock. If it is necessary for Focus to build a prototype sample, all the LCD glass is shipped via fed ex air, so lead times for large orders are a few weeks and not a few months.

Discovering that your current LCD display manufacture has discontinued your LCD Display is never a welcome surprise. Without a drop in equivalent LCD module you may have to discontinue manufacturing or re-design your product to integrate a new LCD replacement. This can be a frustrating experience, very expensive and time-consuming.

The first step is for the customer to contact Focus Displays at 480-503-4295 and send the data sheets for the LCD that you were using. If you do not have a current data sheet or there is a concern that it may not be accurate, Focus may be able to ‘estimate’ a cost from a photo.

If you are not able to supply a data sheet from Ocular LCD Displays and we are not able to locate it, then the next option is to reverse engineer the display. This is where you would send us two displays (these can be non-working) units that we can take apart and create a schematic and electrical characteristics

Below is our process flow chart to explain the steps necessary to move from concept to full production. More details on developing a custom LCD can be located at

Once a LCD supplier discontinues a display, they tend to remove any documentation from their web site. This lack of data sheets increase the amount of work and lead-time required to generate a quote and build samples. In some cases the old LCD supplier has been purchased by another company and much of their documentation is missing.

If you find that your current module supplier has discontinued your display, contact us for support to help you locate a replacement LCD display. We may have old documentation to reduce your lead-time of locating an equivalent display.

If your displays are custom Ocular LCD displays or it is not a standard off-the-shelf display that we hold in inventory, a tooling fee may be necessary. The tooling fee, also called a NRE (Non-Recurring Engineering), is one-time cost that can run anywhere from $500 to $5,000 dollars.

If you pay the tooling fee, then you own the design. We will only sell this display to you or to who you authorize. If another customer contacts us for the same display, we would forward that customer to you or Focus will contact you and notify you there is a customer looking for your custom LCD.

In the past we have tooled up replacement displays and then directed future business to that customer. The customer that paid us the tooling fee can then purchase the displays from us and resell them to another customer.

In some cases, a second customer will offer to repay half of the tooling cost to the first customer for the rights to purchase the display from Focus.

There have been times when a customer required a replacement display and we felt that this would be a popular display for us to hold in our inventory and sell to our LCD customers.

Will I be able to order samples to test before I need to place a large production order? The answer is yes, when you pay the one-time tooling cost for the Ocular replacement display, we offer samples at no cost.

Many times the customer does not require the replacement display for a product they are still manufacturing, but for repairs. Many products, such as cell phones, credit card readers and test equipment will be in the field for several years after production has ended and will require spare units.

Since Focus Displays is building an equivalent display to fill your shortage, why not make improvements on the design? Improvements in LCD technology allow for upgrades such as: Brighter backlights, wider viewing angle, sharper contrast and even lower operating voltages.

Speak to one of our LCD specialist to determine the best solution for you. If need be, we can sell you a display with the brighter backlight configuration for you to test and show your end customer.

DISADVANTAGES OF EL BACKLIGHTS INCLUDEEL backlights require an AC (Alternating current) signal. To generate an AC signal, an inverter must be installed either on the customers board or on the LCD itself.

The popularity of EL Backlights has decreased in the last few years. Over 95% of new product designs no longer incorporate an EL backlight, but instead choose a LED backlight or LED edge-lit configuration. Many products needing a replacement display were manufactured several years ago when EL backlights were common. Your Ocular LCD displays may contain an EL backlight. Many LCD suppliers no longer support EL backlight technology. Focus Displays is able to supply EL backlights, although the MOQ at this time is between 500 and 1K units.

It is not possible to replace an EL backlight with a LED backlight since EL is AC driven and LED is DC (Direct Current). Switching between the two, would require the customer to modify their PCB (Printed Circuit Board) to remove the inverter and add two traces, or contacts to connect the A( Anode) and K(cathode) of the LED backlight.

In the past, older LCD technology was limited to a smaller operating temperate range. New types of Nematic fluids and ITO (Indium tin oxide) glass now allow many displays to operate as low as -30C. We are able to offer these wider temperature ranges with minimal cost increase. In many cases, the LCDs we sell are the wide temperature range. There is no extra NRE cost to convert from a standard temperature display to a wide temperature. If your Ocular LCD displays were used in a product that operates outside, we recommend a wide temp. If the product is used indoors, it is possible to use normal temperature. If you do not know where the product operates, we recommend a wide temperature version.

Older LCD technologies were limited in backlight color to yellow/green. Now there is a much wider selection. You can choose a new backlight color to be integrated into your display with minimal or no extra cost. Below are photos showing the different backlight colors. The two most popular colors are Blue/White and Black/White. Additional colors include: yellow/green, grey, blue, white, red, orange, pure green, amber and others.

16X2 ALPHANUMERIC LCD, TRANSFLECTIVE (WORKS WITH OR WITHOUT THE BACKLIGHT), AMBER SIDE-LIT BACKLIGHT, FSTN, WIDE TEMP, BOTTOM VIEW (6:00), POSITIVE MODE

16X2 ALPHA-NUMERIC LCD, TRANSFLECTIVE (WORKS WITH OR WITHOUT THE BACKLIGHT), PURE GREEN SIDE-LIT BACKLIGHT, STN GREY, BOTTOM VIEW (6:00), POSITIVE MODE

16X2 ALPHANUMERIC LCD DISPLAY, TRANSFLECTIVE (WORKS WITH OR WITHOUT THE BACKLIGHT), WHITE LED SIDE-LIT BACKLIGHT, FSTN, BOTTOM VIEW (6:00), POSITIVE MODE

Focus Displays is able to help reduce or remove hotspots on your older discontinued LCD module by using new diffuser technology, or decreasing the brightness and increasing the quantity of LEDs.

The majority of LCD technologies require an onboard controller driver to be attached to the display. The exception to this is a segmented display that is interfaced with a 4:1 multiplex or direct drive.

Our goal in working to replace your Ocular LCD displays, or any discontinued LCD, is to provide you the same controller driver chip. If the chip on the replacement display is the same as the chip used on your discontinued display, your firmware (aka the customer’s software) will run fine and the characters and fonts will display correctly.

If the new controller is different than the controller used on your Ocular LCD displays, you may need to modify your firmware. When designing the replacement display, we ask the customer to contact their current supplier to clarify which controller chip was used, but if your supplier has discontinued manufacturing of displays, this will not be possible.In this case, send us two of the displays and we will be able to identify which controller was used. If the new controller chip does not work and you are in need of assistance to modify your software, contact Focus Displays and we can put you in touch with a design house that specializes in this type of work.

Focus Display Solutions specializes in supplying replacement LCD Displays for discontinued and obsoleted LCD Display modules. Many times we will have an equivalent display in stock and can sell it to you that day. Other times, we will need to dig deeper to design a custom solution. In either case, our technical support people will work to sell you a display that will meet your needs.

Asia has long dominated the display module TFT LCD manufacturers’ scene. After all, most major display module manufacturers can be found in countries like China, South Korea, Japan, and India.

However, the United States doesn’t fall short of its display module manufacturers. Most American module companies may not be as well-known as their Asian counterparts, but they still produce high-quality display products for both consumers and industrial clients.

In this post, we’ll list down 7 best display module TFT LCD manufacturers in the USA. We’ll see why these companies deserve recognition as top players in the American display module industry.

STONE Technologies is a leading display module TFT LCD manufacturer in the world. The company is based in Beijing, China, and has been in operations since 2010. STONE quickly grew to become one of the most trusted display module manufacturers in 14 years.

Now, let’s move on to the list of the best display module manufacturers in the USA. These companies are your best picks if you need to find a display module TFT LCD manufacturer based in the United States:

Planar Systems is a digital display company headquartered in Hillsboro, Oregon. It specializes in providing digital display solutions such as LCD video walls and large format LCD displays.

Planar’s manufacturing facilities are located in Finland, France, and North America. Specifically, large-format displays are manufactured and assembled in Albi, France.

Another thing that makes Planar successful is its relentless focus on its customers. The company listens to what each customer requires so that they can come up with effective display solutions to address these needs.

Microtips Technology is a global electronics manufacturer based in Orlando, Florida. The company was established in 1990 and has grown into a strong fixture in the LCD industry.

What makes Microtips a great display module TFT LCD manufacturer in the USA lies in its close ties with all its customers. It does so by establishing a good rapport with its clients starting from the initial product discussions. Microtips manages to keep this exceptional rapport throughout the entire client relationship by:

Displaytech is an American display module TFT LCD manufacturer headquartered in Carlsbad, California. It was founded in 1989 and is part of several companies under the Seacomp group. The company specializes in manufacturing small to medium-sized LCD modules for various devices across all possible industries.

The company also manufactures embedded TFT devices, interface boards, and LCD development boards. Also, Displaytech offers design services for embedded products, display-based PCB assemblies, and turnkey products.

Displaytech makes it easy for clients to create their own customized LCD modules. There is a feature called Design Your Custom LCD Panel found on their site. Clients simply need to input their specifications such as their desired dimensions, LCD configuration, attributes, connector type, operating and storage temperature, and other pertinent information. Clients can then submit this form to Displaytech to get feedback, suggestions, and quotes.

Clients are assured of high-quality products from Displaytech. This is because of the numerous ISO certifications that the company holds for medical devices, automotive, and quality management. Displaytech also holds RoHS and REACH certifications.

A vast product range, good customization options, and responsive customer service – all these factors make Displaytech among the leading LCD manufacturers in the USA.

Products that Phoenix Display offers include standard, semi-custom, and fully-customized LCD modules. Specifically, these products comprise Phoenix Display’s offerings:

Phoenix Display also integrates the display design to all existing peripheral components, thereby lowering manufacturing costs, improving overall system reliability, and removes unnecessary interconnects.

Clients flock to Phoenix Display because of their decades-long experience in the display manufacturing field. The company also combines its technical expertise with its competitive manufacturing capabilities to produce the best possible LCD products for its clients.

True Vision Displays is an American display module TFT LCD manufacturing company located at Cerritos, California. It specializes in LCD display solutions for special applications in modern industries. Most of their clients come from highly-demanding fields such as aerospace, defense, medical, and financial industries.

The company produces several types of TFT LCD products. Most of them are industrial-grade and comes in various resolution types such as VGA, QVGA, XGA, and SXGA. Clients may also select product enclosures for these modules.

All products feature high-bright LCD systems that come from the company’s proprietary low-power LED backlight technology. The modules and screens also come in ruggedized forms perfect for highly-demanding outdoor industrial use.

Slow but steady growth has always been True Vision Display’s business strategy. And the company continues to be known globally through its excellent quality display products, robust research and development team, top-of-the-line manufacturing facilities, and straightforward client communication.

LXD Incorporated is among the earliest LCD manufacturers in the world. The company was founded in 1968 by James Fergason under the name International Liquid Xtal Company (ILIXCO). Its first headquarters was in Kent, Ohio. At present, LXD is based in Raleigh, North Carolina.

All of their display modules can be customized to fit any kind of specifications their clients may require. Display modules also pass through a series of reliability tests before leaving the manufacturing line. As such, LXD’s products can withstand extreme outdoor environments and operates on a wide range of temperature conditions.

Cystalfontz America is a leading supplier and manufacturer of HMI display solutions. The company is located in Spokane Valley, Washington. It has been in the display solutions business since 1998.

Crystalfontz takes pride in its ISO 9001 certification, meaning the company has effective quality control measures in place for all of its products. After all, providing high-quality products to all customers remains the company’s topmost priority. Hence, many clients from small hobbyists to large top-tier American companies partner with Crystalfontz for their display solution needs.

We’ve listed the top 7 display module TFT LCD manufacturers in the USA. All these companies may not be as well-known as other Asian manufacturers are, but they are equally competent and can deliver high-quality display products according to the client’s specifications. Contact any of them if you need a US-based manufacturer to service your display solutions needs.

We also briefly touched on STONE Technologies, another excellent LCD module manufacturer based in China. Consider partnering with STONE if you want top-of-the-line smart LCD products and you’re not necessarily looking for a US-based manufacturer. STONE will surely provide the right display solution for your needs anywhere you are on the globe.

Video walls consist of multiple screens grouped together to form one large display and are a great way to visually display an array of information and/or content, especially where high brightness and wide viewing angles are needed.

Our Video Walls can be used across a multitude of industries and are often found in control rooms, sports stadiums, in fact any large public venue. Engineered for the most demanding applications, our video walls deliver outstanding visual performance, flexibility, and reliability. Every ComsatAV video wall is purpose-built and can be customized to meet the unique demands of your use-case and environment.

The industry is flooded with manufacturers of varying capabilities, resources, commitment to quality and pre/post sales support. Some of these manufacturers will produce average quality displays without the needed enhancements that your customers expect today.

E3 Displays is all about making the manufacturing of your perfect display simple. We’ll guide you through an easy process to help you built your product so you never have to worry about low quality, inferior technology, unnecessary enhancements, and post sales continued support. Let’s make your business thrive.