st-90a standalone tft lcd monitor supplier

The Dell 32 Gaming Monitor G3223Q monitor has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD), and LED backlight. The monitor features include:

The Monitor uses Low Blue Light panel and is compliant with TÜV Rheinland (Hardware Solution) at factory reset or default setting. This always on, built-in low blue light solution reduces hazardous blue light emissions, without sacrificing true-to-life colors.

Warning: The possible long-term effects of blue light emission from the monitor may damage your eyes, including eye fatigue or digital eye strain. ComfortView feature is designed to reduce the amount of blue light that is emitted from the monitor to optimize eye comfort.

This section provides some specifications of the Dell G3223Q monitor. To learn more about the specifications of Dell G3223Q monitor, see the User"s Guide at the Dell Manuals website.

Ensuring that your Dell monitor is set up properly. Assembling the monitor stand and setting up the monitor ergonomically. Connecting the cables and organizing them. These will only help make the viewing experience the best it possibly can be.

The standard monitor stand is detached when the monitor is shipped from the factory. To learn more about attaching the standard monitor stand. See the Setting Up the Monitor section in the User"s Guide of your Dell G3223Q monitor.

Where you put your monitor is almost as important as what model you buy. The monitor should be directly in front of you, at an arm’s length away (between 20-40 inches from your eyes). The top edge of the screen at eye level when you are sitting comfortably. You may need to adjust your chair height or the height of the monitor to achieve this.

To learn more about connecting your monitor to the personal computer, see the Dell knowledge-base article: How do I connect a monitor to a personal computer?

Dell G3223Q monitor orientation must always be in landscape mode. This includes any wall-mounted monitors and monitors on a stand. In a multiple monitor setup, Dell G3223Q should not be rotated either to 180° (landscape) or 90° (portrait).

Caution: Dell G3223Q setup must comply with the recommended panel orientation and working angle only. Setting up the monitor in an orientation that is not recommended may damage the monitor and/or cause a safety hazard.

Note: This is applicable for a monitor with a stand. When any other stand is bought, please see the respective stand setup guide for set-up instructions.

Resetting a monitor to factory defaults can help resolve many video or display issues. To reset your Dell G3223Q monitor to factory default settings, follow these instructions:

If your Dell monitor has a blank or black screen, fuzzy or blurry image, flickering, distorted or any other screen abnormalities, running a diagnostic test helps determine if the Dell monitor is functioning normally. To learn more about diagnostic options on a Dell monitor, see the Dell knowledge-base article: How do I run diagnostics on a Dell monitor?

Your Dell G3223Q Monitor provides a self-test feature check that allows you to check whether the monitor is functioning properly. If the monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:

If your monitor screen remains blank after you use the previous procedure, check your video card (GPU) and computer, because your monitor is functioning properly.

Your Dell G3223Q monitor has a built-in diagnostic tool. It helps to determine if the screen abnormality you are experiencing is a problem with the monitor or with the video card on your computer.

When you notice screen abnormalities like distortion, clarity, horizontal or vertical lines, color fade, it is always a good practice to isolate the monitor by running the Built-In Diagnostics.

Note: If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly. Check the video card (GPU) and the computer.

If you notice any abnormalities during Built-In Diagnostics, you may get the monitor repaired or replaced if it is under warranty by contacting Dell Technical Support.

During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. Which is hard to see and do not affect the display quality or usability. For more information, see the Dell knowledge-base article Dell LCD Monitor Pixel Guidelines.

This section provides information about troubleshooting steps that can help resolve the most common issues with the Dell G3223Q monitor. Alternatively, to learn more about troubleshooting common issues on Dell monitors, see the Dell knowledge-base article Troubleshooting Display or Video Issues on a Dell Monitor or use our Monitor self-help Guide.

A few permanently bright or dark pixels are considered normal by industry standards. The exact number of pixels that are allowed varies depending on the monitor. See the Dell Monitor Quality and Pixel Policy for more details.

Built-In Self-Test - The Dell G3223Q monitor has a built-in self-test that helps you identify if the screen abnormality is with the monitor or the video card (GPU) on your computer. When you notice screen abnormalities like distortion, clarity, horizontal or vertical lines, color fade. It is always a good practice to isolate the monitor by running the Built-In Diagnostics.

The Troubleshooting section of this Dell knowledge-base article provides information about troubleshooting common issues with the Dell G3223Q monitor. The section has troubleshooting steps on how to resolve power issues, video issues, color or clarity issues, distortion issues, horizontal or vertical lines, brightness issues or pixel issues and so on.

For more information about using the On-Screen Display (OSD) menu and different menu options. See the Operating Your Monitor section in the User"s Guide of your Dell G3223Q monitor. .

Dell G3223Q supports both HDMI 2.1 and HDMI 1.4 connectivity with your personal computer. If the video or graphics card (GPU) on your personal computer supports HDMI 1.4, it is required to change the monitor to HDMI 1.4 mode.

USB Type-C port on your Dell G3223Q supports USB Power Delivery, Data, and DisplayPort video signal. The USB Type-C port can be used for video and data signal, and supply power (90 W) to a compatible laptop personal computer using a single USB Type-C cable that is provided with the monitor.

Dell G3223Q monitor orientation must always be in landscape mode. This includes any wall-mounted monitors and monitors on a stand. In a multiple monitor setup, Dell G3223Q should not be rotated either to 180° (landscape) or 90° (portrait).

Caution: Dell G3223Q setup must comply with the recommended panel orientation and working angle only. Setting up the monitor in an orientation that is not recommended may damage the monitor and/or cause a safety hazard.

Note: This is applicable for a monitor with a stand. When any other stand is bought, please see the respective stand setup guide for set-up instructions.