apple watch 3 lcd screen free sample

Apple has determined that, under very rare circumstances, a crack may form along the rounded edge of the screen in aluminum models of an Apple Watch Series 2 or Series 3. The crack may begin on one side and then may continue around the screen as shown in the images below.

When inspecting a screen, remove any screen protectors and cases first. Tilt the device under good lighting conditions and inspect it at multiple angles. Screen damage includes hairline cracks that are difficult to see.

Wearables like Apple & Samsung watches often don"t have visible LDIs. Check for moisture under the display screen, as well as corrosion, discoloration, and fuzzy growth on the charging connection.

If the device does not fully turn on and load the home screen or if it cannot stay on without being connected to a charger, it"s considered not able to turn on.

No matter how careful you are, accidents happen. Screen damage and liquid damage are not covered under the warranty, so T-Mobile can"t exchange devices with this damage. But, we don’t want you to be stuck with a broken phone, so you have two options to replace or repair your damaged device:

If your Apple Watch is broken there’s a simple way to tell whether you should fix it before you sell it: compare its price as-is versus its net value after repair.

Find Apple Watch repair costs Next, see how much it will cost to repair your Apple Watch. For our purposes, we’ll use Apple’s repair service pricing, though it’s possible you can get cheaper repairs from an independent shop.

NOTE: If your Apple Watch is still under warranty, you might be able to get it repaired for free. If you have AppleCare+, repairs will cost $69 for all models except Hermes and Edition, which cost $79 to repair. You might also be covered under a carrier insurance policy.MODELREPAIR COST (all repairs)

If you’d rather try DIY Apple Watch repair, you can find parts on sites like FixEZ. Prices range from $2 to $5 for cases, batteries and various cables up to $36 to $150 for LCD/digitizer screen assemblies.

Research the part you need and plug its price into the equation to see if it’s worth fixing your Apple Watch. Keep in mind you risk causing more damage and voiding any warranties and insurance policies.

Calculate the net value of your Apple Watch after repair Use Flipsy to find the value of your Apple Watch after repair (“good” condition). Here are some examples.

As you can see, you’re better off selling your Apple Watch broken than paying for repair. That said, repair services might be worth it if you want to keep your Apple Watch, and DIY repair can be worthwhile if you only need a cheap part.

Then again, brand-new Apple Watch Series 4 prices begin at $399 – just $50 more than the cost of repair. Given those prices, it might not be worth the hassle to fix your own Apple Watch.

I had this Casio on my wrist for more than a month and used one of its handful of functions every single day, something I can"t say for many smartwatches. I used the stopwatch to track my rest intervals between sets at the gym. I set my world time to New Delhi, India, the time zone my sister and parents are in. I"ve used the compass to navigate when I emerge from the subway in New York City and can"t get my bearings, and I"ve learned to read the barometer—mostly just to see how cool it is to predict the weather without having to ask a voice assistant.

I love how this watch looks. It"s rugged and outdoorsy, but still relatively classy. Even better, it"s incredibly comfortable to wear. Seriously, I never took it off in the month I tested it. It"s been fine in the shower and through workouts. I love that it"s made of biomass plastics from regenerative resources, such as castor seeds and corn (and other raw materials). Don"t let that worry you about durability; I"ve been through a move, dinging it on various walls, got paint on it, and yet it looks pristine. The dial is easy to read—the indices glow or you can press a button right below the case to light "em all up for nighttime visibility. And you never need to recharge it. Casio’s Tough Solar tech means it recharges itself via sunlight.

Alibaba.com offers a generous selection of apple watch screen for a host of devices for supreme protection. Hurry and look through the collection of switch screen protectors, tablet screen protectors, and liquid glass screen protectors to find the perfect shipment for you.

The reason many phones use apple watch screen rather than LED or AMOLED screens is because of their relatively cheaper cost. Additionally, smartphone lcd screens also use less power than LED or AMOLED screens and therefore help conserve battery power. With today"s powerful apps, this can be a real advantage for those who do not like to or do not have the ability to charge their phone frequently.

On Alibaba.com, finding the right apple watch screen for any make or model of phone is very easy. We have multiple options from our many wholesalers for each specific iphone watch screen you need for specific phone models. For phone screens, lcd smartphone screens are seen as a more cost-effective alternative to led screens. With the prevalence of damage on the screen, there is a huge demand for replacement lcd screens for phones. Many people are walking around with cracks on their screens and they will be looking for a smartphone lcd screen replacement. So, stock up on replacement lacks screens today!

For anyone that owns an knowing about Apple"s screen replacement program is a must. It"s not often that Apple admits mistakes or flaws in its product design, but in some rare instances like this one, the company has no other choice but to do so.

While the Apple Watch Series 2 and 3 may not be the newest Apple Watches on the market in 2021, there"s a decent chance that a lot of people are still rocking these older models. Not everyone needs to upgrade their Apple Watch every single year, especially when many of the year-over-year upgrades are pretty minor. So, for anyone that does still have a Series 2 or 3, here"s the lowdown on Apple"s screen replacement program.

Apple first launched the program in September 2019 in response to some users reporting a design flaw that caused the screen on Apple Watch Series 2 and 3 to crack. Per Apple"s website for the program, "Apple has determined that, under very rare circumstances, a crack may form along the rounded edge of the screen in aluminum models of an Apple Watch Series 2 or Series 3."As seen in the image below, the crack tends to appear on one corner and then continues around the rest of the display. For anyone with a Series 2 or 3 Apple Watch that"s encountered this issue, it"s possible to get a free screen replacement under the program.

Only the aluminum models of Series 2 and 3 are eligible for the replacement, including Nike+ versions and those with cellular connectivity. Furthermore, Apple has outlined specific dates in which the Apple Watch must have been purchased, going back to September 2016 and up to September 2019 depending on which variant of the Series 2 or 3 that"s in question. Assuming someone has an Apple Watch that meets all of the eligibility requirements, using the program is fairly straightforward.

There are three different ways to get started with the replacement — including finding an Apple Authorized Service Provider, making an appointment at the nearest Apple Retail Store, or contacting Apple Support to receive a mail-in kit. No matter which option is selected, the Apple Watch is set to an Apple Repair Center to determine if it"s eligible for the screen replacement. While the repair should be free of charge in most cases, Apple does note that "In some cases, there may be a cost associated with the repair."

And that"s about all there is to it. The ideal situation is that Apple Watch Series 2 and 3 owners will never have to use the program, but in the event the screen does crack, this acts as a nice safety blanket. Given that it is 2021, though, it might be time to consider upgrading to something new — cracked display or not.

The new WatchOS 9 update brings even more features to the Apple Watch, including more detailed sleep monitoring and a new app for tracking medications to the Apple Watch Series 4 and newer.

With the release of WatchOS 7 in 2020, Apple added the option to change your goals for the amount of time you stand and exercise. Previously, you could only change your Move (or calories) goal.

So instead of using the defaults -- 30 minutes of exercise and a cumulative 12 standing hours a day -- you can change either one to fit your actual daily routine.

This small change will make it possible for you to hit your own targets when you actually start your day, not when Apple tells you to. For example, if you use sleep tracking overnight and need to charge your watch more often in the morning, you won"t feel like you"ve lost an hour of time needed to close those rings.

To take a screenshot on the Apple Watch, you press the Digital Crown and side button at the same time. It"s a simple and convenient method, unless you"re like me and find yourself frequently triggering it accidentally, filling up the Photos app with random pictures of your watch face.

To turn off the ability to take screenshots altogether, open the Settings app on your watch or use the Watch app on your phone and go to General and scroll down until you find Screenshots. Tap this option and toggle off the switch next to Enable Screenshots for a clutter-free camera roll.

If you have a lot of apps installed on your Apple Watch, it can be difficult to find the right ones when you need them. That"s where the Apple Watch"s dock comes in handy. If you"re not familiar, the dock is essentially the iPhone"s app switcher, but for the Apple Watch. You can trigger it by tapping the side button, which pulls up a carousel of recently used apps.

However, you can also customize the dock to show any apps you want instead of your most recent apps. To do this on your watch, open the Settings menu, tap Dock and select the Favorites option. But I recommend setting this up in the Phone"s Watch app instead so that you can customize these apps.

Open the Watch app on your iPhone and tap Dock. Once the Favorites option is selected, you"ll see a list of apps divided into two sections: Favorites and Do Not Include. Favorites are the apps that are currently in your dock, while the latter lists all of the other apps on your watch that aren"t included. Tap the Editbutton in the top right corner to customize the Favorites list to your liking.

There are times when you might not want your Apple Watch"s screen to go idle right away. Perhaps you were in the middle of reading a long text message and got distracted, or maybe you want to keep an eye on your timer. Once you tap the Apple Watch"s screen, it typically stays active for 15 seconds. But you can extend that to 70 seconds by launching the Settings menu on your watch, tapping Display & Brightness and choosing Wake Duration. Then select the Wake for 70 Seconds option.

In the Watch app on your phone, go to Settings>General and then slide the switch next to Automatic App Install to the Off position. You can also do this on the watch by opening the Settingsmenu, tapping App Store and toggling the switch next to Automatic Downloads.

From now on, you"ll install individual apps on your watch by opening the Watch app on your phone, then scrolling to the bottom where you"ll find a list of available apps.

Smartwatches can be useful for discreetly checking an alert or the time. But loud notifications can defeat the purpose. Turn on your Apple Watch"s silent mode by swiping up from the bottom of the screen to launch the Control Center. Then tap the icon that looks like a bell to trigger Silent Mode.

You can also do this by opening the Apple Watch"s Settings menu, scrolling down to Sound & Haptics and toggling the switch next to Silent Mode. There"s also a volume slider for adjusting how loud or quiet incoming notifications sound if you"d rather not mute them completely.

Siri can be useful for quickly setting timers, starting workouts or checking the weather from your watch. But you might not always want to have Siri speak out loud. You can easily change this so that Siri only provides audible feedback when you"re wearing headphones. Open the Settings menu on your Apple Watch, scroll down to Siri and navigate to the Voice Feedback section. Then tap the Headphones Only option. When your Bluetooth headphones are connected to your Apple Watch, you should now see the name of your headphones appear above the Siri volume setting in the watch"s settings menu.

Reading notifications and news headlines can be difficult on a screen that"s so small. Luckily, you can increase the font size on the Apple Watch to make things a bit easier on your eyes. To do so, launch the Settings app on your watch, tap Display & Brightness and scroll down to Text Size. Rotate the Digital Crown or tap the letters that appear on either side of the meter to adjust the text size on your watch. If you have the Apple Watch Series 7, you"ll have more size options for enlarging the text, since it has a bigger display.

Every few hours your Apple Watch will beep and tap your wrist, reminding you to take a moment to breathe. The first time it happens it"s kind of comical; Why do I need a reminder to breathe, wacky watch?! Then it happens again. And again. Every 4 hours by default, for a physiological act that is literally involuntary.

Open the Apple Watch app on your iPhone, then scroll down and tap the Mindfulness app option. Next, selectNotifications off. (Note: If your watch isn"t running WatchOS 8, this will appear as Breathe instead of Mindfulness.)

Typing in your passcode to unlock your Apple Watch can be a pain, but there"s an easier way to do it. You can choose to have your Apple Watch unlock automatically when your iPhone is unlocked.

The honeycomb app grid looks great in promotional photos and at first glance, but it can be difficult to find the app you want to launch, particularly if you have a lot of apps installed on your watch. Instead of in a grid, the watch can display all of your apps in an alphabetical list.

Either in the Watch app on your phone or in the Settings app on the Watch, tap App View > List View. Now, when you press the Digital Crown to leave your watch face, you"ll see a list of apps that you can quickly scroll through and find what you"re looking for.

There are three different ways to activate Siri on your Apple Watch. You can raise your wrist toward your mouth and start talking, long-press the Digital Crown or use the wake phrase, "Hey, Siri."

I"ve found that I often accidentally trigger Siri when trying to check the time or read a notification while I"m talking to someone else (but my watch thinks I"m trying to talk to Siri). It"s annoying, but it can be changed.

Either in the Watch app on your phone or in the Settings app on the Watch, select Siri and there you"ll find three buttons to control when you"ll see Siri. Slide each button to the Off position for any of the options you don"t want to use.This is a hidden feature that you should memorize right now.Jason Cipriani/CNET

Just like Control Center on your iPhone, Control Center on the Apple Watch is where you go to quickly adjust settings like do not disturb and airplane mode and to activate the flashlight.

You may find the default list of options in the Control Center isn"t the best fit for how you use your watch, however, and you want to rearrange the list. For me, that means moving the Bedtime toggle from near the bottom of the list to the top. That way when I want to track my sleep over the weekend when I don"t have sleep goals set, I can swipe up and tap the icon.

To access the Control Center on your watch, swipe up from the bottom of the watch face, or when in an app you can long-press on the bottom of the screen until you see Control Center start to slide up, after which you just need to slide your finger up to access it. The same trick works to view your notifications from anywhere.

Let’s face it: Accidents happen. Your cat knocks your Apple Watch off of the nightstand, shattering the screen when it hits the floor. Or you drop your phone as you get out of the car, destroying the back cover. The good news is broken Apple gadgets can more than likely be repaired. The bad news is it can cost a lot of money to get them repaired.

AppleCare is the standard warranty that every Apple product comes with. Typically, that includes 90 days of free product support (through phone, chat or in-store) and a one-year warranty.

AppleCare+, however, extends the warranty and service, and adds an insurance-like program to your Apple gear. Instead of the standard one-year warranty, AppleCare+ will extend your coverage based on the device you’re covering. For example, a Mac AppleCare+ plan extends your standard coverage to three years. An iPad Pro plan extends it to two years.

In addition to extending the standard Apple warranty, AppleCare+ also includes accidental coverage protection — meaning, should you accidentally drop an iPhone and break the screen or spill a cup of water all over your MacBook, you can get it repaired at a reduced price.

Let’s break down the potential savings: If you have an iPhone 12 and break the screen, Apple will charge you $279 to repair it out of warranty. With AppleCare+, that repair fee is reduced to just $29. Need a battery replacement for your iPhone? Out-of-warranty cost is $69, while the AppleCare+ cost is $0.

Any standard AppleCare+ plan doesn’t cover a lost or stolen device, but Apple offers AppleCare+ Theft and Loss for the iPhone, which provides even more coverage. The Theft and Loss version costs a little more, but instead of paying full price to replace a stolen iPhone, you’re looking at $149 to replace it.

You have to purchase AppleCare+ or AppleCare+ with Theft and Loss within 60 days of purchasing your Apple device. The cost for either AppleCare+ plan varies, based on the device you’re covering and whether or not you want the extra theft and loss protection. Below you’ll find pricing and more details for the various Apple products you can buy AppleCare+ for.

When it comes to Apple’s array of phones you’ll have a choice between AppleCare+ or AppleCare+ with Theft and Loss. Both cover cracked screens, bad pixels, a lame battery, broken backs or busted lenses. AppleCare+ with Theft and Loss will cover, as its name implies, a lost or stolen iPhone after you file a claim and pay a deductible. Keep in mind that in order for Apple to replace a lost device, you’ll need to have Find My enabled when the device goes missing.

AppleCare+ for the iPhone 12 lineup is $199, while all other iPhone models are $149. That’s for two years of coverage from the date of purchase, which has to happen within 60 days of you purchasing the phone.

You’ll get two claims per 12 months, with repair prices ranging from $0 to replace a bad battery to $29 to fix a cracked screen and $149 to replace a lost phone.

You can add AppleCare+ to your iPad, iPad Mini, iPad Air or iPad Pro within 60 days of purchase. It’s $129 to cover an iPad Pro. AppleCare+ for all other iPad models is $69. That’s good for two years and covers two accidents — such as a broken display, water damage, etc. — every 12 months.

The benefit of AppleCare+ for the iPad is that it extends to your iPad accessories, such as the Apple Pencil and any Apple-branded keyboard. So if you crack your Apple Pencil in half while charging it, you’ll pay $29 to get it replaced.

AppleCare+ for Apple’s suite of Mac computers extends your coverage to three years, instead of one year that’s included with the purchase. Furthermore, it will cover any accidental damage to your Mac during that time. You get two claims every 12 months, which can include screen damage or a broken keyboard.

You’ll pay $99 to get the screen or other external damage fixed, or $299 to cover all issues. The cost of AppleCare+ is based on the type of Mac you have.

You can get AppleCare+ for your Apple Watch that’ll extend coverage to two years from the purchase date. You get the same two instances of repair every 12 months like the rest of the AppleCare+ plans, with a flat $69 fee for repairing any accidental damage or battery issues. The price of AppleCare+ varies by the model of your Apple Watch, ranging from $49 to $79. Here’s how it breaks down by model.

When you consider the price of the AirPods and how easy they are to drop in the washer as you load laundry or for your dog to treat your shiny new AirPods Max as a chew toy, the cost of AppleCare+ doesn’t feel that steep. You can get AppleCare+ for the AirPods and AirPods Pro for $29, or the AirPods Max for $59.

Apple’s HomePod and HomePod Mini also have AppleCare+ options. The bigger HomePod’s plan costs $39, with the Mini’s coverage plan priced at just $15. You’ll get two years of coverage and the standard two incidents every 12 months. The plan covers any accidental damage, such as a broken display, ripped power cord or water damage.

The AppleCare+ plan for the Apple TV works a little differently in that it only extends Apple’s standard one-year warranty to two years. You won’t get any accidental damage coverage with the $29 plan; instead, if your Apple TV, Siri remote or power cable stop working within two years of purchase, Apple will replace it free of charge.

Again, not a great deal has changed regarding the Apple Watch 3’s display. It offers the same resolution as last year’s model, with a 272 x 340 (38mm) or 312 x 390 (42mm) OLED display. Importantly, it still has that 1000 nits of brightness, just like the recent Fitbit Ionic – and it’s what sets the Apple Watch devices apart from other rivals. Such searing levels of brightness mean you’re unlikely to encounter difficulties viewing the display, even in bright outdoor sunlight.

The touchscreen display looks incredibly vibrant and crisp, whether displaying your own custom photo watch face or just watchOS’s menus and interface. The font is sharp and readable and icons are easy to recognise. If there’s one minor complaint, it’s that an always-on display option is still lacking – something that many rival smartwatches have long implemented. These typically display a basic watch face in a low-powered state, rather than just having the display appear blank when not in use.

Although not a huge drain, an always-on display on a smartwatch does still impact battery life. Considering this is something that’s already at a premium on the Apple Watch, it goes some way to explain Apple’s hesitance to introduce a similar feature.

A simple wrist rotation gesture brings the screen to life and this works consistently unlike other wearables I’ve worn. You can also more discreetly peek at the time by rotating the digital crown when the display is off. This turns the panel on gradually, notching up the brightness little by little.

The display still supports Force Touch, enabling you to access other menus or interactions by pressing hard on the display. This is met with a little haptic vibration. It isn’t used as frequently as I’d like beyond a few apps and to change watch face customisations.

As mentioned, the microphone and speaker can be found on the side of the watch. The speakers do a great job of letting you take a hands-free call away from your iPhone. You don’t actually need to have it held up to your mouth Dick Tracy-style. At arm’s length works fine; just not dangled down by your sides. With my hands on a steering wheel I was perfectly able to have a conversation using the built-in speaker and mic.

In the initial weeks following the Apple Watch Series 3’s release, much was being said about the headline LTE performance. Namely, there was a problem in how the hand-off between Wi-Fi and LTE was being handled. In Apple’s own words: “We have discovered that when Apple Watch Series 3 joins unauthenticated Wi-Fi networks without connectivity, it may at times prevent the watch from using cellular. We are investigating a fix for a future software release.”

This basically translates as the Apple Watch 3 is failing to use its LTE connectivity – you know, the service you’re paying extra for – because it’s prioritising Wi-Fi instead. In theory this makes sense: you’d probably want the device to use less battery-draining Wi-Fi and also save the data on your LTE plan.

The problem is, the Apple Watch 3 was joining Wi-Fi networks without connectivity, either because the internet connectivity wasn’t working, or because they required a user login. This is typically through a capture page you register, or click through to from the browser on your phone or laptop. Without the ability to do so on your Apple Watch 3, you were trapped in limbo and remained disconnected from the world.

Two weeks after release, Apple issued a watchOS update looking to remedy the issue. In use, I can say that it appears to have done the job for the most part. Disconnecting from my iPhone, either by way of leaving it behind or putting it into Airplane mode, the Apple Watch 3 was much quicker to jump over to its LTE connection – typically taking about 10-30 seconds. Walking around London and past the hundreds of coffee shops and open Wi-Fi networks, I kept an eye on the Apple Watch’s cellular icon and I didn’t see it drop the LTE in favour of an unknown Wi-Fi network.

Reception is, perhaps unsurprisingly, not as good as an iPhone. My gym is located in a basement, which is never great for cellular reception, but my iPhone can at least conjure up a single bar in some areas. There’s no such with the Apple Watch 3. So while I can have my workout tracked and stream my offline music to my Bluetooth headphones, I can’t make use of the LTE connectivity.

Still, there are probably only a few occasions when you’re likely to benefit from having an always-connected – within the realms of network reception – smartwatch. Going for a run is clearly one of them. It was liberating to be able to leave my iPhone behind during the half marathon race, and know that I’d still be able to phone or message my running companion at the finish line. During a few earlier test runs I was still receiving Slack messages from the Trusted Reviews team, even though my iPhone was on my desk. You may occasionally want to turn off the LTE, when you want some alone time.

I can also now leave my phone at home while I quickly pop out to the shops, without feeling disconnected. Then there’s the Emergency SOS feature, which will call the emergency services via a long press of the side button, without the need for your iPhone. You never know when that might be useful, as shown in the Apple Watch 3’s reveal video.

The other potential draw for the LTE connection is Apple Music streaming, which will let you stream the service’s 40 million-odd tracks straight from your wrist while on the go. You can already download your Apple Music playlists for offline playback on the Watch, but if you’re always on the hunt for something new then you’ll appreciate the option. However, Apple Music streaming isn’t available at time of review – Apple says this should be ready within the next month.

The fact that the LTE connection doesn’t support roaming is frustrating; this is true even if your iPhone’s network provider supports it. This means if you take your Apple Watch Series 3 GPS + Cellular model out of your home territory, it will operate like the non-LTE model. That’s a drawback for frequent travellers – and a real shame.

Another annoyance is that when I attempt to call my voicemail number from my Watch, it directs me to my iPhone. The ability to clear voice messages (only ever left by my mum) from my Watch rather than having to get my iPhone out would have been great.

Then there’s also the fact that without your iPhone turned on and connected, you won’t receive SMS messages on your Apple Watch 3 even if it has LTE reception, although you can send SMS messages (iMessages will, however, send and receive as normal).

So far, occasions where the LTE connection has been undeniably useful for me have been few and far between. There’s obviously far more you can do with your iPhone than your Watch, limiting how often I felt compelled to go out without my device – aside from ‘just because I could’.

In fairness, Apple’s proposition with the LTE-enabled Apple Watch 3 isn’t as a device to replace your iPhone; it wouldn’t need pairing with one if it was supposed to, after all. It’s whether these sporadic moments and conveniences are worth the premium for both the device and your phone contract that will ultimately define the LTE option importance to you.

You use the iPhone app to scan in all your barcodes – up to ten can be stored for free. They’re then accessed on your watch by way of suitably chunky buttons. And if you ever have need of each code’s ludicrously lengthy account number, that’s accessible too.

If you’re of the opinion golf would be much better if only you didn’t have to deal with all those other people on the course, Deep Golf might be the solution. First, it’s right there on your watch – no need for expensive clubs. Also, it’s set deep underground.

This app broke a couple of the Stuff team, but we nonetheless heartedly recommend it for a quick calorie burn. All you need is your Apple Watch – Streaks Workout functions independently of the iOS app – and the will to work up a bit of a sweat.

You choose from four workout lengths (30 entirely suitably being dubbed ‘extreme’), and the app strings together simple exercises. When you’re done with a set of reps, you tap the screen. Easy. Except when your entire body is screaming at you for not initially going for the six-minute option.

You might question an indie taking on the terrifying might of the RunKeepers of this world, but Runance deserves a slot on your Apple Watch – at least if you prize privacy and don’t care about leaderboards and the like.

Kick off a workout on your watch and you can gawp at live metrics as you huff and puff, switch between rolling and average tempos, and control music. Back on iPhone, you can dig into your workout history and maps. There’s no login – and no data is shared with third parties.

There are loads of workout apps for Apple Watch, but WorkOutDoors does something the others don’t: maps. On your wrist, you get a vector-based map that can be zoomed, panned or rotated. It’s like someone stuck a tiny iPhone in an Apple Watch case.

Given that Strava’s been able to work without an Apple Watch for some time now, it’s one of the more reliable efforts on the platform. The tiny snag is that it gives your battery a bit of a kicking. Still, all the more reason for you to pick up the pace a bit.

Getting your bum off the sofa is one thing. Being able to jog 5K without your knees collapsing is another. WatchTo5K eases you towards that goal. You do three runs a week, gradually building up how long sessions are and reducing how much walking time’s involved. In the end, you’ll be able to run 5km in under half an hour. All the number crunching happens right on your Apple Watch, meaning you don’t have to lug your iPhone around or figure out how to shove it inside your day-glo lycra running gear.

Your Apple Watch encourages you to track and protect your health — steps; stands; hearing. But Moodistory tries something different, inviting you to keep tabs on your mood.

It’s possible, even on Apple Watch, to add basic notes to entries, and check how your mood’s changed during the past two weeks. On iPhone, you can dig deeper into your data.

If you feel your Apple Watch telling you to get off your behind once every hour isn’t sufficient motivation, you might enjoy Standland. The app has similar intent to Apple’s nagging, but rewards your heroic activity by dishing out adorable collectable creatures.

Any activity lasting at least one minute during an hour is counted, maxing out at 24 per day. Before long, you’ll have a tiny owl or little bunny to gawp at, which can romp around 3D AR environments back on your iPhone. Just take care to not die of a cute overdose.

You’re at your desk and feel achy. But there’s no way you can exercise, right? Wrong! Wakeout’s cunning plan is to inject tiny bouts of physical activity into your day. On iPhone, you’ll get a schedule. But on Apple Watch, it’s more a question of selecting a context, watching a brief animation of a randomly selected relevant exercise, and then performing it for a short period until your wrist buzzes and tells you to stop. At a fiver a month (albeit for the whole family), the Apple Watch app alone might not convince you to subscribe; but as a complete package, it’s a solid deal – and you get a seven-day trial to make up your mind.

Apple’s weather app places forecast data around a dial. It doesn’t scan well. CARROT does a lot better, with a minimalist take on its superb iPhone app, delivering data-dense forecasts with a dollop of snark. You’ll helpfully be told it “sucks to be you” if it’s about to chuck it down – or that it’s “a bit moony” on a cold, clear night.

The big plus of CARROT Weather, though, is its customisation capabilities. On iPhone, this means you can rework the interface however you see fit. On Apple Watch, its power is in complications, with you being able to have it take over a face, like a wrist-based combination of Siân Lloyd and HAL-9000. You’ll need subscription IAP for a bunch of the Apple Watch features, note – but it’s well worth splashing out.

There are complication options, including a large one with a graph and sunrise/sunset times. And you can also set up notifications on your iPhone that’ll appear on your Apple Watch, which for SAD sufferers can be limited to days when daylight’s increasing.

On the iPhone, Citymapper is fantastic, giving you point-to-point directions for a range of supported cities, and location-based public transport details and alerts. The Apple Watch app is equally good, offering rapid access to favourite places, and information about nearby trains, buses, ferries and more.

Journey steps are clearly outlined, providing all the assistance you need, such as times of upcoming trains, stops on your route, and tiny maps that link through to Apple’s Maps app. We just wish it could somehow magically work for every town and city in the world rather than just the handful of (mainly) capitals it’s currently set up for.

Fortunately, Foursquare for Apple Watch does the business. You can quickly get at the best tips for your current location, search for other options, and get at salient details regarding whatever you’re currently looking at. And if you don’t want to miss somewhere special, have the app ping you a notification when you’re passing by.

Apple’s Find My is great, but a better bet would be to avoid losing your gadgets in the first place. With PB (‘Phone Buddy’), you can define alerts that have your iPhone shriek for its life should you wander off and abandon it – and the same for your Apple Watch.

Although it’s not quite like having a tiny translator taped to your wrist, iTranslate can quickly find translations for whatever you utter (or scribble) into it; and it can also speak (through your Apple Watch) to help with pronunciation.

Go ‘pro’ (a month costs £4.99) and you can use an offline mode on your phone. The app also has a clever Complication, which shows a greeting for the current time of day, and displays previous translations when you twiddle the Digital Crown to use the watchOS Time Travel feature.

Even better: this app’s properly thought about how you interact with Apple Watch. There’s no fiddly keypad for entering data – instead, you twiddle the Digital Crown to adjust numbers, and swipe to increment available digits.

You set up lists, allocate a budget, and then input values when you spend or receive some cash. And if you want to be constantly guilted by your Apple Watch, Pennies can show your ongoing budget as a Complication.

Although Apple’s Timer has a moniker in the singular, it does in fact store multiple timers – including custom ones. However, they’re devoid of context, and you can only run one at once. Not so with MultiTimer.

Set up your timers in the iPhone app, and each is then displayed on your Apple Watch with a colour, label and icon. You can run as many timers as you like, and their progress is seamlessly synced across devices.

You edit the list on your iPhone, and there are loads of customisation options. Those vital dates can then be in your face forever, by way of Apple Watch complications. You’ll never miss a date again – unless you forget to add it to the app. So… don’t do that.

On your iPhone, iPad or Mac, Cloud Battery lets you add devices to the app’s ongoing list, along with accessories like trackpads and Apple Pencil. On iPhone/iPad, you can define when you get charge alerts, such as when battery levels fall below 25%.

The Apple Watch app is a mere monitor, but that still proves useful. You can at a glance – either in the app or by way of a complication – see which of your devices needs plugging in, rather than rocking up to it later and finding only a black screen.

The idea behind Just Press Record is to make capturing voice memos insanely simple. On Apple Watch, the app starts off as a massive record button. Prod it to start recording. When you’re done, the recording lurks on your Apple Watch until it next connects to your iPhone, at which point it transfers, and is even automatically transcribed. Easy – and something Apple’s own Voice Memos app doesn’t do.

Using the Apple Watch app, you can also peruse and playback recent recordings. The only snag is there’s no background playback, so it’s best for shortish memos. Still, that’s a small niggle when using it makes you feel like you’re living in a trashy sci-fi flick.

You can also edit, create and organise (into folders) new cheats directly on Apple Watch (by way of dictation), along with using one of these notes as a complication. Just don’t make it your credit card PIN, eh?

Weirdly, Notes has yet to make its way across to Apple Watch, but fortunately Drafts ably fills that particular void. The app enables you to capture new notes by dictation, which are then hurled into your Drafts inbox. Alternatively, you can append or prepend whatever you input to an existing note – for example, to update a diary or shopping list.

If you don’t fancy talking at your Apple Watch, you can use the watchOS Scribble feature to write notes instead. Also, your inbox is browsable and your notes are readable on you Apple Watch, saving you from having to keep heading to your iPhone.

On iPhone, LookUp (£8.99) is a dictionary that’s friendly, colourful and fun – not words you’d expect to find in the same sentence, granted. The Apple Watch app is similarly impressive, enabling you to get countless definitions right on your wrist, and access a word of the day, thereby expeditiously ameliorating your vocabulary.

If you’re a serious iPhone photographer, you’ve probably already got Halide installed. If not, you should have – it’s a superb, premium, feature-rich app that unlocks the full potential of your Apple smartphone’s snapper.

Naturally, the Apple Watch app can’t magic up an Apple Watch camera. But it can provide a live preview of what your iPhone’s camera can see – useful when taking a photo with your arm stretched aloft, or when using the main camera for a selfie. Prod the shutter button to take a snap, or set off the timer to give everyone a few seconds to get their best smile on.

On iPhone, Bear Focus Timer is superb for keeping focused on tasks by breaking the day into work and break sprints. The Apple Watch app puts a similar system right on your wrist.

There are two sides to Watchsmith. The first is the app, which is like a Swiss army knife. Open it and you’ll find mini-apps for weather forecasts, workouts, timezone conversion and calendars; there are even a few games to faff about with.

IAP’s required to unlock some functions, but the base app is free. It’s well worth a look to demonstrate the scope of complications and how your Apple Watch can benefit from its display being more dynamic beyond the Siri face.

If you’ve fond memories of calculator watches, you’re probably a) quite old and b) not going to be convinced about using a calculator app on Apple Watch. Because frankly, doing so is a mite fiddly.

Still, PCalc is the best of them. The buttons are chunky, and operators can be got at with a long tap or prodded on a second screen. The app also includes a handy third screen for conversions. It defaults to tips, but you can spin the Digital Crown to get at units for all kinds of things, including functions.

On iPhone, this conversions app is all about efficiency and speed. You define a bunch of conversions, tap out a number and then see all of the answers at once. On Apple Watch, you cannot add any new conversions to your favourites, but you do get your existing iPhone list right on your wrist. A calculator interface lets you punch in new figures, colours usefully differentiate unit types, a ‘reverse’ button enables you to instantly swap converted units around, and there’s a complication to put a specific conversion on your favourite watch face. For free, you’re limited to a handful of custom list items. That restriction can be removed with a 49p per month or one-time £12.99 payment.

Perhaps you don’t want to plough through a Twitter feed using a tiny screen strapped to your wrist, but Chirp gives you that ability anyway. More usefully, it gives you access to all the messaging bits of Twitter as well.

This means you can check out mentions and delve into direct messages, retweeting and replying right from your Apple Watch. And if you’re a bit self-obsessed, you can favourite all those mentions too. (This is assuming you pay the one-off ‘pro’ IAP. Skinflints mostly only get to view rather than use Twitter with Chirp!)

On mobile, Onefootball is a a one-stop-shop for all things footie, offering news, telly, scores, results, and enough stats to choke the entire Match of the Day research team. On Apple Watch, it’s mostly a wrist-based companion to fill you with anticipation and terror when it goes ‘ding’.

This is because goal alerts are fed to your Apple Watch, meaning if you’re not able to sit in front of the telly when your favourite team’s playing, you can at least keep up with how well – or badly – things are going.

Everything’s customisable. You can add/remove widgets and rearrange their order, along with tweaking what information’s shown. And for when you don’t fancy delving into the app, Sundial provides a bunch of great-looking complications for your watch face.

Apple’s Podcasts is on Apple Watch, enabling iPhone-free podcast bliss. But if you prefer using the iPhone’s best podcast app, Overcast, you’ll love its own Apple Watch app. It can act as a remote for whatever’s playing on your iPhone, but there’s a standalone mode as well, for podcasts Overcast syncs to your watch based on criteria you define.

The app’s design is refined and minimal, packing a lot into a small space. The main view provides fast access to settings and your podcasts list. When playing something, you can also use the Apple Watch app to adjust speed and skip chapters, thereby blazing past any boring bits. Bonus!

WatchFunk isn’t going to make you the next Daft Punk, but it’s fun, usable and a better use of your time than trying to work through your emails on the Apple Watch’s tiny display.

Turn-based strategy on a PC with a big display makes sense. Your eyes might narrow a bit at the prospect of such games on a phone. But on an Apple Watch? Hang on a minute.

Calling Star Duster our favourite Apple Watch game isn’t huge praise, given the competition. But what makes Star Duster properly stand out is it’s a good game, full stop. It echoes old-school LCD titles, with you twiddling the Digital Crown to have your servicebot zoom around the display, collecting space junk.

It looks and sounds lovely, like you’ve accidentally invoked a time travel app and been zapped back to 1982. But Star Duster isn’t done, because it does a lot with a little, providing real challenge as it ramps up the difficulty level with blocking walls and other servicebot-worrying hazards. Games are swift, but – unlike most Apple Watch fare – you’ll when defeated immediately want another blast.

Instead of playing a game on your watch, Dice by PCalc helps you play games in the real-world, by way of lobbing virtual dice across a virtual table. From a visual standpoint, this is impressive stuff on Apple Watch, but flexibility is the real win.

In the options screen, you choose from a wide range of dice types – or complete sets to roll with a single tap. Your table can be cleared at any point, or you can gradually throw additional dice, while the app tots up what you’ve thrown and the overall score. Cheats can’t prosper here.

When it comes to customising and personalising your Apple Watch, the watch face you set on the display is of paramount importance. It should fit in with your personal style, display information that’s most important to you, and look good. While Apple doesn’t allow third party watch-faces on the Apple Watch, the company does offer a pretty large library of faces itself. So, here are the best Apple Watch faces that you should check out.

With the launch of watchOS 9, your Apple Watch is getting a ton of new features. The sleep tracking on watchOS is getting better yet again, and there are a bunch of new fitness focused features, including heart rate zones, and more. And, of course, we get new watch faces, including the cool Metropolitan watch face, which is my new personal favourite.

That means, the already fairly decent library of watch faces on Apple Watch is growing steadily, and in this article, I will be discussing the best Apple Watch faces that are available pre-installed on your Apple Watch. That said, if these watch faces aren’t enough for you, you can actually create and set custom Apple Watch faces as well.

One of my personal favourite new watch faces in watchOS 9, Metropolitan is a clean watch face that manages to look minimal even with support for four complications around the corners. The watch face seems perfect for both casual and semi-formal settings, and you can rock it at a formal meeting as well, but I would personally stick with a more simple watch face in such a situation, like the California watch face.

In terms of customisation, Metropolitan offers four different types of watch styles, five dial options and a bunch of color choices to pick from. Basically, you can make this Apple watch face work with any outfits you have planned.

The Lunar watch face is another one that’s new with watchOS 9, and brings a lot of information to your screen. It will prove really useful to people who like to keep a track of the lunar calendar alongside the Gregorian calendar. What’s more, it comes with support from three lunar calendars: Chinese, Hebrew, and Islamic.

There’s support for four complications around the corners, just like the Metropolitan watch face. However, this watch face can look a bit overwhelming to people; it certainly looked that way to me. Customisation options are definitely not a lot here, and you can only change the color of the second hand, and switch between an analogue and digital clock.

Playtime looks like a watch face custom built for kids, but it’s a load of fun regardless of how old you are. The cute watch face is perfect for those times when you’re simply chilling (especially if there are kids around because they will love this). The watch face comes from Apple’s collaboration with Joi Fulton, and it brings a bit of interactivity as well. You can rotate the digital crown to change the background. Plus, tapping on the faces of the characters makes them react to you, which might sound like a waste of time, but is weirdly fun.

The Astronomy watch face is inspired by a mechanical orrery, says Apple. The watch face is definitely one of the coolest ones available on the Apple Watch as far as sheer looks are concerned. You can choose between the ‘Earth view’, ‘Moon view’, and ‘Solar System view’ on the watch face, and it continuously updates as the day progresses. Personally, I find it really interesting to watch the sunrise and sunset over India as the day goes by. And, you can even rotate the digital crown to view the light/shadow on the face of the earth in the coming hours.

The Modular watch face is perfect for people who like digital watches, and want a load of information to go along with it. Whether you’re looking to add complications for keeping track of the weather, your to-do list, timers or alarms, the Modular watch face has got plenty of space to fit it all in.

For customisation, you can choose from a bunch of color options, and enable/disable the background color as well. There’s space for a total of six complications here, which should be enough for most people, but if not, there’s always the Infograph watch face to bring even more information at a glance.

So far, Portraits is the only new watch face in watchOS 8, but it is really cool (and loads of fun). With this new Apple Watch face you can simply choose any portrait mode photo as your watch face background. You also get two complications that you can set — one in the middle and one on the bottom. Now the cool thing about this face is how it shows up your photos. You get a neat 3D effect on your Apple Watch, complete with perspective motion. Plus, you can rotate the digital crown to bring the subject in your photo forward, which is also quite cool. This is definitely my favourite new watch face for Apple Watch, and you can learn how to set Portrait watch faces on Apple Watch with our linked article.

One of my personal favourite Apple Watch faces, and the one you’d likely see me sporting on my watch most often is the Infograph watch face. This watch face brings a total of eight complications to the screen, which means there’s ton of information on here, which is great for me.

Also, the watch face makes great use of space, and it just looks amazing to me. Some people might find this to be too loaded with information, and if that’s the case you can either choose a different watch face from the rest of the list, or you can just turn off some of the complications from Infograph as well.

Infograph is also the best watch face for exercise enthusiasts because you can add complications and shortcuts for all your workout related apps and features. So you can have things like the workout app, water logging apps (if you use any), heart rate tracking, and everything else in the same watch face.

This watch face brings the basics right up-front and looks really classy. You get the time, obviously, along with a bunch of options for the dial-markers including Devanagari if you want hindi numerals.

You can go full-screen or circular with the watch face. I prefer full-screen which gives me access to two complications. However, if you go circular, you’ll get four extra complications on each corner of the watch face. So if you want extra information on your wrist, you can go with that.

There is also the GMT watch face which came with watchOS 7. This was announced alongside the announcement of the new Apple Watch Series 6 and Apple Watch SE in September 2020. The GMT watch face is inspired by classic watches, with a modern twist.

It comes with an inner dial with 12-hour markings that shows your local time, and an outer dial with 24-hour markings that shows you a different time zone. This, you can set by simply rotating the Digital Crown to see all the available time zones, and selecting the one you want to view on your watch face.

Technically these are separate watch faces, but they are basically the same thing, except for the element used. These watch faces show awesome animations every time you tap the screen or wake your watch.

These are by-far the coolest looking Apple Watch faces you will find. The animations are insanely captivating to look at, and I would recommend you keep the dial shape to full-screen for a more immersive animation. However, if you want complications on the screen, you can opt for a circular dial shape as well.

Meridian is like a slightly more casual version of California. It offers a refined look to your watch while still being slightly playful. Meridian only offers a full-screen look, but includes four complications in the middle of the screen that you can customise.

The Simple face lets you choose the dial design, so you can go completely minimal with just the watch-hands if you like, or add the hour-markers to your watch face.

The watch face does include complications, but I would suggest that you turn them all off, and just keep the date complication on for the cleanest, most minimal Apple Watch look you can get. Check out the screenshot below.

I don’t know how dependent you are on Siri for running your day to day life, but if you like Siri’s context-aware suggestions, this watch face can make your life a lot easier.

The clean-ish looking watch face shows you the time, along with a bunch of Siri cards that surface information based on what Siri thinks you might need to know at that given point in time. It will show you your upcoming events, the weather, sunset/sunrise times and more.

If you’re looking for a watch face that’s perfect for a casual outing with your friends, or maybe a trip to the beach, check out Numerals Duo. This watch face displays just the time in two-toned numerals on your watch screen and looks pretty nice.

Another interesting casual watch face you can use on your Apple Watch is the typograph face. As the name suggests, typography takes center stage with this watch face. You get to choose from three custom type styles: classic, modern, and rounded.

Plus, you get to choose whether you want to view just four numbers (12,3,6,9) or all 12 numbers on your watch face, and which script you want to view them in. Personally, the default settings look the best to me, but if you want you can choose from Arabic, Arabic Indic, Devanagari, and Roman.

If you like slightly more interactive watch faces, check out Solar. This watch face tracks the movement of the sun around your location, and has a clock that runs opposite it to display the time. Check out the screenshot.

Moreover, you can rotate the Digital Crown to move ahead in time and see the position of the sun throughout the day. The face even marks the twilight, sunset, dawn, and other times right on the watch face itself.

Who doesn’t love Toy Story? It’s one of my favourite animated movies of all time, and if you’re a die hard fan of the movie, the Toy Story watch face will definitely interest you.

The watch face features fun little animations from all the main Toy Story characters, so you can have Buzz Lightyear, or Woody play around on your wrist. You can tap on the watch face to see more animations from different characters as well.

Pro-tip: This is also a great way to keep a young kid playing around with the watch, in case you’re looking for something to distract your kids at times.

Lastly, there’s the ‘Photos’ watch face, which does pretty much what you’d expect it to do. You can choose a photo from your library and use it as the watch face on your Apple Watch.

The Memoji watch face is perfect for people who want to show off their Memoji creations to the world, while having some fun seeing them be animated on your wrist. The watch face features all the standard memojis, and all the memojis you’ve created on your iPhone. That’s pretty cool because it opens up the watch face quite a bit. You can create a memoji unique to you and your watch.

The Artist watch face doesn’t really offer much in the way of customisation or even information for that matter (which is why it’s quite low on my list), but it’s still a neat face to have.

As I said before, watch faces are the most important aspects of personalising your Apple Watch and making it uniquely yours. Plus, with watchOS 9 and watchOS 8, you can use some third party apps to create custom watch faces for your Apple Watch as well. However, of all the faces that Apple ships with its smartwatch, these are my picks for the 20 best Apple Watch faces that you should try on your watch. If you think some other watch face deserves a spot on this list, do let me know in the comments below and I’ll definitely reconsider my choices.

Glass substrate with ITO electrodes. The shapes of these electrodes will determine the shapes that will appear when the LCD is switched ON. Vertical ridges etched on the surface are smooth.

A liquid-crystal display (LCD) is a flat-panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals combined with polarizers. Liquid crystals do not emit light directly,backlight or reflector to produce images in color or monochrome.seven-segment displays, as in a digital clock, are all good examples of devices with these displays. They use the same basic technology, except that arbitrary images are made from a matrix of small pixels, while other displays have larger elements. LCDs can either be normally on (positive) or off (negative), depending on the polarizer arrangement. For example, a character positive LCD with a backlight will have black lettering on a background that is the color of the backlight, and a character negative LCD will have a black background with the letters being of the same color as the backlight. Optical filters are added to white on blue LCDs to give them their characteristic appearance.

LCDs are used in a wide range of applications, including LCD televisions, computer monitors, instrument panels, aircraft cockpit displays, and indoor and outdoor signage. Small LCD screens are common in LCD projectors and portable consumer devices such as digital cameras, watches, digital clocks, calculators, and mobile telephones, including smartphones. LCD screens are also used on consumer electronics products such as DVD players, video game devices and clocks. LCD screens have replaced heavy, bulky cathode-ray tube (CRT) displays in nearly all applications. LCD screens are available in a wider range of screen sizes than CRT and plasma displays, with LCD screens available in sizes ranging from tiny digital watches to very large television receivers. LCDs are slowly being replaced by OLEDs, which can be easily made into different shapes, and have a lower response time, wider color gamut, virtually infinite color contrast and viewing angles, lower weight for a given display size and a slimmer profile (because OLEDs use a single glass or plastic panel whereas LCDs use two glass panels; the thickness of the panels increases with size but the increase is more noticeable on LCDs) and potentially lower power consumption (as the display is only "on" where needed and there is no backlight). OLEDs, however, are more expensive for a given display size due to the very expensive electroluminescent materials or phosphors that they use. Also due to the use of phosphors, OLEDs suffer from screen burn-in and there is currently no way to recycle OLED displays, whereas LCD panels can be recycled, although the technology required to recycle LCDs is not yet widespread. Attempts to maintain the competitiveness of LCDs are quantum dot displays, marketed as SUHD, QLED or Triluminos, which are displays with blue LED backlighting and a Quantum-dot enhancement film (QDEF) that converts part of the blue light into red and green, offering similar performance to an OLED display at a lower price, but the quantum dot layer that gives these displays their characteristics can not yet be recycled.

Since LCD screens do not use phosphors, they rarely suffer image burn-in when a static image is displayed on a screen for a long time, e.g., the table frame for an airline flight schedule on an indoor sign. LCDs are, however, susceptible to image persistence.battery-powered electronic equipment more efficiently than a CRT can be. By 2008, annual sales of televisions with LCD screens exceeded sales of CRT units worldwide, and the CRT became obsolete for most purposes.

Each pixel of an LCD typically consists of a layer of molecules aligned between two transparent electrodes, often made of Indium-Tin oxide (ITO) and two polarizing filters (parallel and perpendicular polarizers), the axes of transmission of which are (in most of the cases) perpendicular to each other. Without the liquid crystal between the polarizing filters, light passing through the first filter would be blocked by the second (crossed) polarizer. Before an electric field is applied, the orientation of the liquid-crystal molecules is determined by the alignment at the surfaces of electrodes. In a twisted nematic (TN) device, the surface alignment directions at the two electrodes are perpendicular to each other, and so the molecules arrange themselves in a helical structure, or twist. This induces the rotation of the polarization of the incident light, and the device appears gray. If the applied voltage is large enough, the liquid crystal molecules in the center of the layer are almost completely untwisted and the polarization of the incident light is not rotated as it passes through the liquid crystal layer. This light will then be mainly polarized perpendicular to the second filter, and thus be blocked and the pixel will appear black. By controlling the voltage applied across the liquid crystal layer in each pixel, light can be allowed to pass through in varying amounts thus constituting different levels of gray.

The chemical formula of the liquid crystals used in LCDs may vary. Formulas may be patented.Sharp Corporation. The patent that covered that spec