kuman 7 inch capacitive touch screen tft lcd pricelist

Loved the screen itself, works well with the OLD builds they supply. I need to add this to an existing Kali 2017.1 build. The scripts run but then boots into command line, and at 640x480. Xrandr won"t recognize any other resolution. I"ve been hacking at this for days. I need this to be built on a current version (Kali 2017.1) of Kali. Tried all the manual workarounds (like executing each of the copy commands in the LCD7B-show) but always the same outcome.

I needed to install this on my Kali 4.4.50v7 as I"ve built some special tools on it with lots of dependencies. I bought the 5" and used the Kali image and the monitor worked great, but again, I needed it on my build. I was able to get it going following a blend of 2 different posts (https://dephace.com/change-screen-resolution-in-kali-linux-on-raspberry-pi-3/ and https://whitedome.com.au/re4son/topic/displays-how-tos/) I list what worked for me in case anyone has the same needs. First I tried simply doing the mounting of the boot drive and copy the 2 files over but that only brought me to a console session. Both of these we"re needed in my case. From the list below you can make your own script. The updates seemed repetitive but I just followed the other directions and included parts of the LCDB7-show Kuman reached out about the previous negative feedback and offered a refund, I declined, I really like the touch sensitivity and brightness! I"m only knocking one start because it took 9 long days of pounding to get it right.

● Operating voltage: 12V 1A power supply current requirements within the above 2A, On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight.

● Support 864 x 480 x 24bit graphics content through SSD1963 controller .It also equips parallel MCU interfaces in different bus width to receive graphics data and command from MCU. Its display interface supports common RAM-less LCD driver of color depth up to 24 bit-perpixel. Warning: All data port voltage can not exceed 3.6V.

We understand the urgent needs on geting the parts quickly to make breathing devices. We are now working hard to produce the screens, if you have any question, welcome to send us emails.

Kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 800x480 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B (7 Inch Raspberry Pi Touch Screen)

NOTE: 1.Please note Supported update Raspberry Pi 3 2 and RPi 1 Model B B+ BB BLACK supported 2.Power Supply is NOT included.for PI ,do not require power supply 3.There is a sticker on the LCD screen. Please peel off before use. Feature: LCD Size : 7.0 inch (Diagonal) Driver Element : A-Si TFT active matrix Display mode : Normally White ,Transmissive High Resolution: 1152,000 Dots (800 x 3(RGB) x 480 SSD1963 touch panel controller Dot pitch : 0.0642(W) X 0.1790(H)mm Active Area : 154.08(w)X 85.92(H Module Size : 164.9(w)X100.0(H)x5.7(D)mm Surface Treatment : Anti-glare Color arrangement : RGB-Stripe Interface: Digita Blacklight : Highlighted LED lamp backlighting TFT Power(pin Name: 3.3V): The power of the screen is 2.8-3.3V; not use 5V, all the Pin"s voltage on the module Can not be more than 3.3V Backlight power supply (pin Name: 5V): backlight power range is 4.5-7V Interface Type: 16 parallel Operating Temperature : -20 ~ +70 degrees centigrade Storage Temperature : -30 ~ +80 degrees centigrade Package includes: 7inch HDMI LCD (B) x 1 HDMI cable x 1 USB type A plug to micro B plug cable x 1 RPi screws pack (4pcs) x 1 DVD × 1 SC7B 7 inch HDMI LCD(B) Using standard HID protocol, so that you can migrate its to your own systems With the use of Pi Raspberry, support Raspbian、Ubuntu、Windows 10 IoT Single-Touch, Free drive. When used as a computer monitor, support 10 / 8.1 / 8 / 7, Five point touch, Free drive