dry water between lcd touch screen supplier

Your LCD computer screen or any other LCD Display can get ruined due to water damage. If water in laptop screen is visible in the display or even you have a hint of suspicion that water has penetrated your screen then take action immediately because leaving moisture unattended in the laptop screen will surely cause permanent damage. If you remove the moisture quickly then your screen and the entire system have a chance to recover and return to normal display by resuming its operations.

When moisture is detected on your computer and specifically in the LCD screen then you need to unplug your power cord and shut down your computer. Your computer will short which may cause serious damage if the water creeps into the live circuit. Remove the battery completely from the laptop or remove all the cord connects from the monitor display after the power is turned off when you shut down your laptop. Then take a paper towel to blot the keyboard by absorbing water from the screen exterior. To prevent it from working into the computer remove as much water from the exterior as possible. Then place the laptop next to your fan so as to encourage evaporation while you prepare for the next step.

We recommend that you purchase a large bag of rice by adding rice to a storage bin, bucket, or any dry plastic container that is large enough to accommodate the computer with the rice combined. Then fill half of the bin to start by setting the entire laptop or the LCD monitor on the rice and add more rice until it is completely covered, then seal the container. Here the type of rice is not important as you can use any type of rice whichever is least expensive. The rice creates an ultra-dry environment by absorbing the water. The rice pulls away from the moisture by drying out your LCD screen’s water damage. This works for most of the electronic devices in which water has entered. We recommend that you leave the screen in the rice for full 24 hours. Then pull out the screen by wiping away any residue from the rice with a soft cloth to avoid any scratches on the screen.

By now ideally, the rice must have absorbed your laptop screen water cloud or other LCD water display issue. Then after cleaning the screen replace the battery or cords and reconnect the power. Then turn on the laptop unit to test the screen. You need to watch for any flickering or any odd behavior which indicates that water is still present. If the laptop screen is performing normally then it indicates that the water is removed. If the problem still persists then return it to the rice bin by leaving the unit submerged in dry rice for several days. This process works, however, it works slowly. You can also use the kitty litter method by absorbing the moisture in case the rice method fails. The litter method is used to grab moisture by holding it in clumps. In an extreme case, you need to buy silica gel packets like those found in shoeboxes which will also work for repairing LCD screens having water damage.

Here is theConclusion abouthow to remove water from lcd screen -We hope this blog will be useful for our laptop users who find it difficult to repairLCD Screen Water Damage.

Laptop screen water damage is a common problem. It can happen when you spill liquid or food on the laptop. It may also occur if you accidentally spill water on your laptop while it"s being used outdoors or in a wet room. If the damage isn"t quickly cleaned, it can lead to permanent loss of data and/or hardware failure.

There are many causes of laptop screen water damage,but most are preventable. The following tips will help keep your laptop safe from accidental spills and other water-related accidents:

If you accidentally spill something on your laptop screen, don"t panic. You can still salvage the plastic cover and get it clean with a little effort. Simply use your vacuum cleaner to suck up any water that has managed to penetrate the cover. If there is any liquid left behind, you can use a soft cloth or paper towel dampened in rubbing alcohol to wipe it away. Be sure not to use anything abrasive as this can scratch the screen.

You also need to be careful about blowing air directly at the screen if you want it to stay dry. Blowing air directly across the computer"s surface can create static electricity that causes damage over time. Instead, place some towels over areas of your laptop"s case where there may be liquid present and blow across them gently with a fan turned off or on low power (keep in mind that this will also help with dust).

The most common reason for water in monitor screenis a broken seal around the monitor. The seals are plastic or rubberized strips that keep dirt and dust from getting inside of your monitor. When these seals break, they can cause water to leak into your computer.

Screen is FUBARed it seems. I let it sit out for the past few days. Tried connecting it back up to the system. There"s now a 4-step gradiant vertically across the screen on black screens like the Vista boot screen (top of nice and black, bottom is pretty gray). Once Windows boots, the gamma appears to be at some sort of crazy high value. Everything is very white and washed out. I haven"t had time to call a Dell Customer Service rep, but I"ve been told that Dell sells the screens for $600+ in most cases and that it"s just not worth going through Dell for the upgrade. I"ve taken a look at some replacement screens on eBay, most of them are around $250 or so shipped for an sxga+ screen, give or take.

I noticed one wuxga screen (1920x1200), for another $20 or $30 more (link is here. It wasn"t given as an option when I picked up the system, though I"ve since seen later Inspiron 6400s with the option. Anyone happen to know if my system would be compatible, or if there were significant differences between the original Inspiron 6400s and the later ones?

Have a desk fan blow directly at it for 7 days. Then, buy some tools, and then open the lcd screen to see if it"s completely dry. If not, repeat the process, but this time, don"t buy tools because you already have.

Get a sponge from your kitchen(of course you have one) and buy some tools to open lcd screen. Then, open the lcd screen, and then you have to try to use the sponge, soak as much water as you can. Try not to touch the battery, or else you"ll get electrocuted and that can hurt your skin tremendously. If needed, repeat the process, but this time you don"t have to buy tools because you have.

For this suggestion, get a 1000 Watt hairdryer. If you have a lot of water on the lcd, and they won"t get away(it"s mostly sticky stuff with little water), use high heat, at 212 F, to evaporate the water. But then the sticky stuff will still be left behind. Get a can of water, and try to put just the right amount of water to rinse the glue off(It"s hard, too little will leave glue, too much will need to repeat the process again). Then try to examine the motherboard with a see-through lens, which can see through objects. This can lead to overheating. Make sure the CPU is under 100 F.

Open the screen in the computer, set your dehumidifier to at least 122 F. Make sure the dehumidifier points directly to the screen. This will soak the water out, but this can overheat the CPU, so make sure the CPU temperature is 100 F or less. If it hides really close to getting in the screen, set the dehumidifier very close, around 6 inches away or less, but that could burn your monitor.

In my book, an iPhone 5 water damage recovery requires desoldering the shields and scrubbing every inch of the board, and then replacing any component that is corroded, burned, or damaged after examination under the microscope. Think of corrosion as a cancer that will metastasize if left unchecked.

When you say "digitizer not working" do you mean the display, or just the touchscreen function. If you mean the display, I would guess that your backlight coil or filters have failed---very common after water damage. Of course it is also common for the LCD to fail as well. If I were you, I would give it to a local shop and ask if they desolder the shields to do a full water damage recovery.

Your computer’s screen or any LCD can be ruined by water damage. It is why you should act immediately if you notice any sign of water or moisture present on your computer’s monitor.

As this article proceeds, we will talk about how you can identify water damage. This will help you have a better chance of recovering your screen’s normal function.

You can also read this article and learn why are electronics damaged by water so you can further understand the weight of water damage on your computer screen.

Any computer suffering from water damage will eventually get worse over time. It is why you must recognize these signs of water damage as soon as possible.

The easiest to notice signs of water damage are those that are visible to the eye. If you suspect your screen of having water damage, unplug your computer immediately to avoid a short circuit.

Then, conduct a visual inspection and examine the screen for any sign of the presence of moisture. You can also open the case and see if there are any signs of moisture, corrosion, or discoloration.

Specific components of a computer turn to a shade of green when exposed to liquids like water. If you notice such signs, chances are your screen has water damage.

It is a very good sign if your screen does not have booting problems and displays the alarming blue screen of death. If it does, it is best that you take your computer to professionals, so they can repair it properly and salvage your monitor.

Water can cause serious malfunctions to your computer screen. It can cause it to flicker, dim, fail to display color correctly, or worst, end up completely broken.

After you detect that there is moisture in your computer, specifically in the monitor or LCD screen, unplug it immediately and shut down. Once you have turned the power off, remove the battery along with all the cords connected to the monitor display.

Grab a paper towel and blot the screen to absorb as much moisture as possible from the exterior. Then, place the computer next to a fan to allow evaporation as you prepare for the next step.

Grab a large amount of rice and pour it into a storage bucket, bin, or any dry plastic container that is large enough to take your computer and rice in. Fill half of the container with rice, place the entire computer or the monitor inside, and proceed to adding more rice until completely covered, then seal the bin.

As much as possible, choose the least expensive rice you can get as the type does not matter. Rice can create an ultra-dry environment for your monitor and absorbs water.

Leave the monitor in the rice for a whole day. Afterward, pull the screen out and brush away any residue from the rice using a soft cloth to avoid damaging the screen’s surface.

Expectedly, the rice will dry out your computer screen along with any LCD water display issue. After getting out and cleaning the screen from the rice-filled bin, you can now replace the cords or battery and reconnect it to power.

If unfortunately, the problem persists, you can return the computer back to the rice bin for several days. If it still doesn’t work, call for professional help to recover your screen from water damage.

It is undoubtedly a hassle to have your computer and other electronic devices wet with water. Although it usually happens, especially in offices or in your home, where you can accidentally spill your favorite drinks.

Maybe the apartment above yours has sprung a water leak. Or perhaps your teen tripped in the living room, spilling soda all over the TV. Either way, now your TV is wet, and it’s not working like it used to. Learn what to do if your TV got wet and how to know when it’s time to shop for a new one.

A small spill or minimal condensation on your TV may not cause irreparable damage as long as the water doesn’t reach the primary power sources. But even just a small amount of water on the circuit board can lead to permanent TV damage and short-circuiting.

Start by unplugging the TV. Then, wipe up the water with a non-abrasive cloth to avoid scratching your screen. Give your TV plenty of time to dry, and ensure that every drop of water has been wiped up so that it doesn’t soak into your television.

If your TV has sustained heavy water damage, it’s likely beyond repair, and you may need to replace or upgrade your television. However, any attempted repairs should be done by a professional.

Allow your TV to fully dry and have it inspected by a certified technician. A professional will be better equipped when determining the extent of the damage. Taking your television apart yourself could put you at risk of serious injury and may void the warranty. It’s always best to check your TV manufacturer’s warranty information before having any repair work done.

If you have a water-damaged TV screen, you’ll likely know pretty quickly once you’ve turned it on. A water-damaged LCD screen is usually not repairable, as water can settle between the layers of the liquid crystal display and can be very difficult to dry. In this situation, consider replacing your water-damaged TV with a new one.

Your TV’s remote control may be a little more forgiving of water damage than your television. If you’ve spilled water on your remote, quickly remove the battery cover and batteries. Then, use a soft, non-abrasive cloth to wipe all the water off the remote. If the water spill was minimal and doesn’t appear to have gotten inside, wiping it and setting it out to dry should be enough.

If there was a big spill or the remote was submerged in water, it likely has internal water damage, making it less likely to continue working. Remove the battery cover and batteries, wipe the remote down, and place the remote in a zip-top bag filled with dry rice. Let the remote sit for 1-2 days before removing.

Replacing a water-damaged TV remote may not be as big of a deal with tons of universal and replacement remotes available. But a water-damaged TV is a different story!

Back when you used to have CRT monitors and TVs, you could clean them with almost anything. The screen was made out of glass and nothing else. That’s no longer the case with today’s LCD and OLED displays.

The modern display is a sensitive device that requires special care. You can easily damage a touchscreen if you clean it using a rough sponge or an aggressive cleaning agent. You’ll eventually scratch the screen and damage its special coatings, and you’ll end up with an inferior device that no longer takes your touch commands. This applies to any laptop, tablet, TV, phone, or another device with LCD, MicroLED, or OLED display.

For example, Dell might recommend using 70% isopropyl alcohol to clean one of their PC monitor models, while Samsung might recommend using nothing other than a dry microfiber cloth. Despite general recommendations, you should always prioritize the manufacturer’s specific instructions. This will also help you with warranty claims.

Some screens, especially touch screens, have special coatings for protection and to reduce the amount of reflection and glare. Harsh chemicals will remove those coatings and even damage the material of the display. Don’t use any household cleaning agents.

When you aren’t sure what’s safe to use, use canned air and microfiber cloths. Canned air is great for cleaning computer hardware, keyboards, as well as monitors, and TVs. It can’t cause any damage to the surface of the screen whether you’re cleaning a tablet, an OLED monitor, or an old school glass TV.

Dust gathers on the surface of your screen, especially around the edges, so start by blowing it off with compressed air. Use a high-quality microfiber cloth to move the stubborn dust particles when the compressed air isn’t enough. All you need is a light touch. Don’t press too hard on the display or you can damage it.

It’s very important to use microfiber cloth only. It’s soft enough not to scratch the screen or damage any of the protective coatings. Don’t use paper towels or tissues because they contain little loose fibers that can cause small scratches.

Sometimes canned air and dry microfiber cloth aren’t enough to remove stubborn particles. Don’t press extra hard when something dry is stuck to the display. Use distilled water instead. Tap water would also work, but we don’t recommend it because it contains all sorts of minerals that will leave streaks behind.

Take note that most manufacturers will tell you to avoid using any liquids, but sometimes you just don’t have a choice. Distilled water is safe to use as long as you just dampen the microfiber cloth enough to remove that pesky spot of dirt. Don’t spray it or splash it directly on your screen. Spray it on the cloth until it’s slightly damp.

Use a dry microfiber cloth to wipe the corners of the display and remove the dirt and oils from the screen. Use a light touch. Don’t press hard when you find a stain. This can cause serious damage.

Clean the back of the TV or monitor. You’ll find a lot of dust there. Fortunately, it’s all plastic, so you can use a multipurpose cleaning solution as long as you don’t touch the screen.

Instead of using distilled water with a microfiber cloth, you can opt for one of the many professional cleaners available on the market. It’s important to buy a cleaning kit or cleaning solution that is odorless and without any alcohol or toxins that could damage a TV or monitor display. So take a look at some of the best and safest cleaning solutions we’ve found.

WHOOSH! is an alcohol-free display cleaner. It’s suitable for all types of screens, whether they’re LCD, OLED, LED, or CRT. You can also use it to clean your mobile devices. In fact, this is the same display cleaner that Apple uses in its stores. It’s also completely odorless, so it won’t leave any residues.

EVEO is a screen cleaner safe to use on all types of TVs, monitors, and touchscreen devices. It’s great for removing greasy fingerprints and other stubborn smudges. Just remember not to press hard and use the microfiber cloth that’s included in the package. You can also use EVEO to clean other electronic gadgets.

If you don’t want to use sprays or liquids, try the lens and screen cleaning wipes from Care Touch. They’re individually packed, so when you need to clean a display, you always have one handy.

Care Touch wipes contain some isopropyl alcohol, but not in an amount that should be dangerous. The wipes are made for cleaning all types of screens without damaging the anti-reflection coating. As a bonus, you can also use these wipes on sunglasses and camera lenses.

The more often you clean your TV and computer monitor, the less you’ll have to deal with a build-up of grime and dust. This way a microfiber cloth should also be enough because you won’t have any tough dirt spots. So clean your screens regularly and keep them sparkling.

Remember when your LCD or OLED display had that brand-new, fresh-out-of-the-box shine, feel and look? You are in the right place if your display is now due for deep cleaning.

A microfiber cloth and distilled water is recommended for cleaning the display glass. Use Qtips and Isopropyl alcohol for cleaning the printed circuit board.

Although distilled water is recommended for wiping the display glass, you can use a cleanser developed explicitly for cleaning displays. However, do not spray it directly onto the display. Spray a tiny amount of the cleaner onto a microfiber cloth first to avoid getting any cleaning solution inside the display.Never spray any liquids directly onto the display.A spray is too hard to control and confine. The fluids can seep into the other display layers or surrounding components and cause irreversible liquid damage.

Only use a microfiber cloth and don"t use chemicals to clean a resistive touchscreen.Disconnect the display from the power supply and remove any screen protectors or liners.

Cleaning soldering residue on LCD with Isopropyl alcohol and a Q-Tip.Cleaning residue around soldering elements is not necessary if Newhaven Display performed the soldering.

Cleaning your electronic display is a simple task. However, it is essential to consider these steps to handle and clean it properly. You should now have a better understanding of what cleaning products are safe to use, how to clean the display screen glass, how to clean touchscreens and how to clean soldering residue.

Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!

Before you give into your impulses and wipe your screen with whatever you have at hand, let us stop you right there. Your display is way more delicate than you think, and if you want it to last a long time in optimal conditions, you’ll need to treat it with proper love and care.

The good news is that cleaning a computer screen is more simple than you think. You only need a soft cloth, a tiny bit of water, and the most delicate of touches.

As you would expect, not all screens are created equal, and some are more delicate than others. The safest way to figure out the proper care for your screen is to search for the make and model of your device, find out if it has an LCD, LED, or some other type of display, and search for the manufacturer’s instructions on how to care for it.

If you want to skip all that, there’s an easy way to avoid making a mistake that might not only result in irreparable damage to your screen but to your entire device. According to Joe Silverman, owner of New York Computer Help, a tech repair center in New York City, no matter how much money you spent on your computer or tablet, it probably has an LED or an LCD screen if you bought it within the last three years—and neither type benefits from window cleaner or highly concentrated alcohol.

That’s the uppermost layer of your screen, which is extremely sensitive to the acidity in alcohol and in compounds like ammonia or propylene glycol. These are often present in cleaning agents such as window cleaners and degreasers. Using these liquids will corrode the surface of your screen, resulting in scratches or even smudges you won’t be able to get rid of.

Things get even trickier when you’re dealing with touchscreens. On models like the Microsoft Surface, the display is the main input—as opposed to your mouse or trackpad on a regular laptop—so it’s ultra-sensitive, Silverman says. Using a strong liquid cleaner like a degreaser or a bleach-based disinfectant can obliterate the top layer on the screen. Combine that with high pressure, and you can kiss your fancy touchscreen computer goodbye.

Another downside to newer computers is their size and weight. If you decided to splurge on a new laptop, for example, you probably found one that has top-notch components, but also a slick, lightweight design. This format is only possible if everything in your laptop is smaller and thinner. In the case of your display, a thinner screen means a weaker barrier between your computer’s guts and the elements in the outside world.

Caring for your screen is simple—it only takes a little bit of water and a dust-free cloth, such as a microfiber wipe or the piece of fabric that came with your glasses.

First, turn off your computer and disconnect the charger. This might sound paranoid, but the benefit is twofold—you avoid any chance of triggering an electrical surge, and your screen will remain black, which will make it easier to see any dirt and grime.

Pour a couple drops of water on your cloth. Forget paper towels or the sleeve of that soft cotton t-shirt you love—microfiber is your best bet. Still, no matter how soft it is, a dry wipe could always leave micro-abrasions on your screen. The moisture will also help gather dust and particles while lifting grease from your display.

Use circular motions starting in the center of your screen and moving outward, so you don’t leave any streaks. If you can see any droplets or water traces on the glass while you clean, you’ve used way too much water. Gently dab the residual H2O with an absorbent cloth or tissue paper and start again.

If you’re dealing with next-level gunk, you can use isopropyl alcohol at 70 percent or lower, Silverman says. “That percentage is very important,” he explains. “We’d only use 90 percent or higher on dummy parts that don’t have sensors, like top cases and keyboards.” In these extreme cases, spray the alcohol on the cloth, never directly on the screen, and wipe it gently.

Just like solar damage, screen damage is cumulative. The more pressure you apply, the more abrasive a product you use, and the more often you use it, the greater the damage you’re inflicting on the protective layer of your display and the delicate sensors underneath it.

Maybe you can get away with using a high percentage of alcohol or even a window cleaner on your computer screen once or twice. But if you keep at it, eventually you’ll see the deleterious effects.

“You’ll see discoloration, lines (vertical and horizontal); sometimes it looks pretty and rainbow-like,” Silverman says. “Sometimes it’ll blink and sometimes you’ll see droplets of water or liquid in the back of the screen. There’s a lot of ways in which damage appears.”

The best way to avoid damaging your screen while cleaning it is to simply keep it from getting dirty in the first place. If you have a laptop, cover the keyboard with a thin microfiber cloth before closing it to prevent finger grease from transferring to the screen. If you have a touchscreen, wash your hands often before you use it, but make sure you let your hands dry completely before you start tapping—the soapy water or liquid hand cleanser from your fingers can easily end up on the screen and corrode it.

Your phone was designed to be carried, dropped, tapped, swiped, smashed against your face for long periods of time, and stowed in the deepest corners of your bag. In other words, its screen is way more resilient than your computer’s.

Silverman explains that most iPhones and Samsung phones, for example, have screens made out of one thick piece of glass. These, as opposed to computer screens, have all the LCD layers fused together, making them much more difficult to damage. Still, if you’re using alcohol, he recommends keeping the concentration at 70 percent or lower, using a soft cloth, and applying only low pressure to get rid of any accumulated gunk there.

Be especially careful with charging ports, as contact with water (also present in rubbing alcohol) can damage the electronics inside your smartphone. Newer models often are resistant to liquids, but there’s always a threshold to how much they can withstand. And you probably don’t want to know what that is.

Replacing the screen of your computer or smartphone can be expensive, and even if that’s not an issue for you, no one wants their devices to fail when they need them the most. So remember these tips well—we hope you never have to read this article again.

Whether you spilled a liquid on your laptop or it was left in an area of your home that suffered water damage, a water damaged laptop will usually experience a variety of problems. It"s not uncommon for the water to seep into the device"s chips, circuits and wires, thereby causing aspects of the computer to malfunction. Commonly, such malfunctions are related to the screen not turning on or operating effectively, even when the rest of the machine is seemingly working fine. There are a few routes you can take to fix this issue.

If your laptop screen isn"t turning on, there"s a good chance that water is still inside of it. The first step you should take is attempting to dry the machine yourself. Turn the laptop upside down and see if any water drains out of the machine. You might also consider using a blow dryer on various parts of the screen to see if you can dry any of the excess moisture, which is likely the culprit of a malfunctioning screen.

If you"ve attempted to dry your laptop without disassembling it and it"s still not working, the next step is to remove the screen. On most PCs, this can often be done with a few basic hand tools, although the steps vary by model. After you remove the screen, separate it from the circuit board and look for any excess water inside the circuit board. If there is no water, the water may have dried and rusted some of the inner workings. Use a soft cloth and do your best to clean the circuits or even any stains that may be left on the screen itself. Reassemble the computer and see if the screen powers back up correctly.

If your screen still isn"t working after attempts to dry it and you don"t have any type of spill replacement warranty on your laptop, you"re not out of options just yet. Many laptop manufacturers sell replacement laptop screens that can be installed. If a replacement screen is unavailable, one way to salvage your computer is to attach your laptop to an external screen. If your laptop still turns on and it"s just your screen that is faulty, purchasing an external panel and connecting it to your laptop via a USB cable can still ensure its use.

One other route you can take to remedy the situation is to hire a contents restoration company to salvage the piece. Specifically, contents restoration companies use a variety of specialty drying technologies to dry items after homeowners experience water damage. The technology is able to salvage things like books, board games, furniture and electronics such as DVD players and computers. However, water damaged items must be attended to within 24 hours of initial damage for the best success rates.

We’re not the type to make up statistics, but we’ll assume that 100% of all phone users would experience a fit of panic if their phone fell in water. If it’s happened already, you probably told yourself that it’s “game over”.

Well here’s the good news. If you backed everything up - you should be okay. But more importantly, phones don’t die upon immediate contact with water, meaning you can fix them even when there’s significant damage.

Water turns into a phone’s kryptonite when it works its way into the ports, jacks and speakers. Once inside, it flows into the circuits. The result? The water, which acts as a conductor, carries a current which then overloads the phone with energy, frying the circuit board.

Certain practices make this worse, such as allowing the phone to dry on its own. Letting water sit in the phone leads to corrosion of its circuits, coils and resistors due to minerals in the water.

This one throws people off too because the damage isn’t immediately apparent in all cases. Sometimes, the water might take a little longer to reach vulnerable components. That’s why someone can drop their phone in water without any noticeable effects. But the following day, those poor souls won’t be able to turn on their phones.

The other thing to keep in mind is the source of water. Dropping your phone in a puddle or the toilet is bad, but dropping it in the ocean, and you can kiss that phone goodbye. Salt water is highly corrosive and will damage a phone’s components much quicker than freshwater. So be careful when taking selfies on your yacht.

Now explanations are great but solutions matter way more. Water doesn’t waste its time in circulating through your phone, and the damage it causes is never far away. So if your phone fell in water, you need to act fast.

Here’s the truth - simply allowing your phone to dry off completely on its own isn’t a good idea. Remember, water does its damage under the surface where your hands can’t reach. Power to you if you’re mechanically-inclined and repair your own devices, but if you can’t, let the experts do the dirty work.

Dropping a phone in water happens to the best of us. With that said, some people just seem to have their you-know-what together and don’t seem to have these accidents. A few simple tips can put you in their league and keep your phone dry.

Get a water-resistant case or phone -There’s no such as waterproof cases or phones, but water resistant phones can survive a brief drop in water with no harm done. The keyword here is brief.

Be mindful of your surroundings -You’ll most likely have the experience of having dropped your phone in water at some point, or at least a close call. So hold your phone tighter or put it in your pocket if you’re walking on or near watery surfaces.

Assuming you respond quickly, it will live. Follow the tips mentioned above, and even serious water damage shouldn’t leave your phone completely sidelined. The worst that might happen is a temporary vacation from your device while it’s under repair, and having to use an old-school, loaner flip phone.

When cleaning a touchscreen, it is important to realize they are sensitive to chemicals, much as is a pair of glasses with plastic lenses. The cleaning kit supplied with a pair of such glasses is just the ticket for safely cleaning your touchscreen; it typically includes a micro-fiber cloth and a gentle cleaning solution and can usually be had for $10 or so.

Avoid Isopropyl alcohol at concentrations greater than 70% and non-diluted bleach or ammonia solutions. The use of incorrect solutions can result in visual impairment of the touchscreen, discoloration, and damage to functionality.

If further cleaning is needed, use a commercially available product such as Klear Screen or Glass Plus to dampen a clean, dry, non-abrasive cloth or use pre-moistened wipes designed for cleaning electronics. Avoid contact with the edges of the film or glass and the flex tail.

Note: Resistive touch screens (plastic film) have an air vent to equalize pressure on some part of one of the edges. Getting any liquid on the vent can damage the display module, so the panel needs a gasket and bezel to prevent this. An acceptable solution would be to put a cleanable screen protector over the entire screen before the gasket/bezel. See “Is there an inexpensive screen protector I can use for my display?” for more information.