dry water between lcd touch screen price

Your LCD computer screen or any other LCD Display can get ruined due to water damage. If water in laptop screen is visible in the display or even you have a hint of suspicion that water has penetrated your screen then take action immediately because leaving moisture unattended in the laptop screen will surely cause permanent damage. If you remove the moisture quickly then your screen and the entire system have a chance to recover and return to normal display by resuming its operations.

When moisture is detected on your computer and specifically in the LCD screen then you need to unplug your power cord and shut down your computer. Your computer will short which may cause serious damage if the water creeps into the live circuit. Remove the battery completely from the laptop or remove all the cord connects from the monitor display after the power is turned off when you shut down your laptop. Then take a paper towel to blot the keyboard by absorbing water from the screen exterior. To prevent it from working into the computer remove as much water from the exterior as possible. Then place the laptop next to your fan so as to encourage evaporation while you prepare for the next step.

We recommend that you purchase a large bag of rice by adding rice to a storage bin, bucket, or any dry plastic container that is large enough to accommodate the computer with the rice combined. Then fill half of the bin to start by setting the entire laptop or the LCD monitor on the rice and add more rice until it is completely covered, then seal the container. Here the type of rice is not important as you can use any type of rice whichever is least expensive. The rice creates an ultra-dry environment by absorbing the water. The rice pulls away from the moisture by drying out your LCD screen’s water damage. This works for most of the electronic devices in which water has entered. We recommend that you leave the screen in the rice for full 24 hours. Then pull out the screen by wiping away any residue from the rice with a soft cloth to avoid any scratches on the screen.

By now ideally, the rice must have absorbed your laptop screen water cloud or other LCD water display issue. Then after cleaning the screen replace the battery or cords and reconnect the power. Then turn on the laptop unit to test the screen. You need to watch for any flickering or any odd behavior which indicates that water is still present. If the laptop screen is performing normally then it indicates that the water is removed. If the problem still persists then return it to the rice bin by leaving the unit submerged in dry rice for several days. This process works, however, it works slowly. You can also use the kitty litter method by absorbing the moisture in case the rice method fails. The litter method is used to grab moisture by holding it in clumps. In an extreme case, you need to buy silica gel packets like those found in shoeboxes which will also work for repairing LCD screens having water damage.

Here is theConclusion abouthow to remove water from lcd screen -We hope this blog will be useful for our laptop users who find it difficult to repairLCD Screen Water Damage.

Laptop screen water damage is a common problem. It can happen when you spill liquid or food on the laptop. It may also occur if you accidentally spill water on your laptop while it"s being used outdoors or in a wet room. If the damage isn"t quickly cleaned, it can lead to permanent loss of data and/or hardware failure.

There are many causes of laptop screen water damage,but most are preventable. The following tips will help keep your laptop safe from accidental spills and other water-related accidents:

If you accidentally spill something on your laptop screen, don"t panic. You can still salvage the plastic cover and get it clean with a little effort. Simply use your vacuum cleaner to suck up any water that has managed to penetrate the cover. If there is any liquid left behind, you can use a soft cloth or paper towel dampened in rubbing alcohol to wipe it away. Be sure not to use anything abrasive as this can scratch the screen.

You also need to be careful about blowing air directly at the screen if you want it to stay dry. Blowing air directly across the computer"s surface can create static electricity that causes damage over time. Instead, place some towels over areas of your laptop"s case where there may be liquid present and blow across them gently with a fan turned off or on low power (keep in mind that this will also help with dust).

The most common reason for water in monitor screenis a broken seal around the monitor. The seals are plastic or rubberized strips that keep dirt and dust from getting inside of your monitor. When these seals break, they can cause water to leak into your computer.

You can get your phone touchscreen fixed if it gets damaged by water. It is frustrating to have an impaired touchscreen. However, you will have a clue on how to fix touchscreen not working after water damage. The phone touchscreen is responsible for receiving inputs from external touches. Water can find its way through the display screen when caught in the rain or a shower. Subsequently, the touchscreen is susceptible to damage from contact with the water.

you do not have to be extremely worried. The line below explains how to fix the damaged touchscreen. Read through the guides to understand what you need to know now.

The phone hardware is the visible part of your phone that can become spoiled by water. One of the phone hardware constituents is the touchscreen. If your touchscreen gets damaged by water, you should shop for a new replacement.

The phone screen is a delicate part that needs handling with utmost care. If your phone touchscreen is water-damaged, the entire screen of your mobile phone will be affected consequently. There’s no possibility that you can have your touchscreen working without a screen replacement.

The more your phone gets exposed to water, the more it becomes hard to fix. If your phone touchscreen is not working after water damage, relax, you can still get it repaired. Exposing the phone to water creates more harm to it.

Excess water contact with the phone corrodes the phone components. These components will further become harmed by corrosion. When your phone is water-damaged, avoid contact with more water.

One of the things you should do while your phone is on when damaged by water is to switch it off. If your phone is water-damaged, ensure the phone is not on. Other hardware components get damaged while you try to on the phone.

A liquid substance in the impaired part of the screen can create a circuit problem on the phone. The internal part of the phone will also be affected by the short circuit. If your phone is on, hold on to the power button to switch it off.

If your phone is water-damaged, it is time you remove your essential tools from the device. Items like your Sim card, the Memory card should remain ejected from the water-damaged phone. These items can become damaged or accumulate water inside the phone.

You can remove these inserted items by unplugging the slot from the phone side. Expose these parts to dry air if there are water drops on the spots. Also, ensure the removed piece is dry to avoid rust.

If you can remove the battery on your phone, do so without delay. Removing the power source from the phone stops the operation you are not able to control. In some instances where you cannot power off your phone when it is water-damaged, pulling out the battery stops the phone activity.

It is the best option to consult a phone repair service if you have repairs to be made on your phone. Phone repair service offers you an array of repairs that pertains to your water-damaged phone. While you cannot remove your in-built battery, they use advanced tools to do so at their store.

If you have prepared for a screen replacement, how do you get the screen replaced? You can only get your water-damaged touchscreen replaced by a professional technician. Even better, you should consult an experienced repairer to make the replacement durable.

Where do you get a reliable repair and warranty for your phone? If your water-damaged phone is from TECNO, Infinix, or itel brand, you should consult Carlcare Service.

Carlcare Services is the official after-sales service provider for TECNO, Infinix, itel users. We specialize in high-quality and one-stop repair solutions for these brands. Moreso, you get up to a 30-days warranty after repairing your water-damaged phone screen repair at our official center.

I’m sure you aren’t very keen how water works on electronics. Rice doesn’t really absorb moisture like you think it does with electronics. The starch that is in rice actually speeds up the corrosion process on the motherboard, which leads to things not working on the device, or complete device failure. It also kinda “suffocates” the phone, and doesn’t allow air to vent through the device.

The proper way to leave a phone that has been water damaged recently if you don’t know how to take it apart Is to immediately power it off, to avoid a short circuit on the board, sit it on a ventilated area, or out in the sun for a few hours if you are unable to take it to a Genius Bar.

From the beach to the boat, wherever we go to enjoy the warmer weather, our phones are usually right along for the fun—and keeping them above water can be a challenging task. According to 2021 Asurion claims data, more phone repair claims are filed for water damage between June and August than any other time of the year.

So, what is the best way to protect your phone from liquid damage? Asurion Experts are asked this question often while helping our 300 million (and counting) customers with all of their tech care needs. Their advice: Invest in a waterproof pouch. While some of the newest phones are considered “waterproof,” they’ll only be protected if submerged for a set period of time—to learn more, check out our guide to waterproof vs water-resistant phones. Waterproof phone pouches, like those made by CaliCase® or JOTO®, will help to keep your phone afloat.

Here"s what to do if you drop your phone in water or get it wet:Remove it from the liquid immediately. The longer it stays there, the more liquid will seep into various inlets.

Use a cloth or paper towel to dab your phone dry. Do not rub the phone, as doing so could accidentally push liquid into the phone’s more sensitive parts. If the phone was completely submerged, you might try (very) gently vacuuming around the phone’s creases and openings to suck more water out.

There are a few signs that can confirm water damage to your device:Look for the visual presence of water or evaporation (or dried water markings) behind the screen.

Check the Discolored Liquid Damage Indicator (LDI). The LDI is typically located in the headphone jack, battery compartment, or SIM tray slot. If your phone has water damage, the LDI will appear red or maroon.

According to Asurion Experts, putting your water-exposed device in rice may absorb some moisture. However, it may also cause other issues for your phone, such as an introduction of dust and dry starch (a rice byproduct) into your phone"s cracks and crevices. Rice could also potentially become lodged in your phone"s charging port or headphone jack, which can be extremely difficult to dislodge as the rice swells when exposed to liquid.

Blow-drying your phone when it"s exposed to water is not recommended. While it might remove some of the surface moisture, it will do very little to remove the moisture from inside your device and the heat could do irreparable damage to your phone"s internal components.

Turn the device off and place it in an upright position to dry out, with the speakers facing downward. Doing so will encourage excess water to come out.

So as it would turn out, the gray area of the screen is actually the dried water while the white area is the water getting inbetween the backlight and the foil. So as of today pretty much all the water is gone. Due to damage somewhere the backlight was damaged and it wont go as "bright" but is otherwise perfectly fine.

What Id really like to do is completely strip the phone and scrub parts then take out the screen and get under that foil and rinse it with alcohol. Since I"ve never opened one up I don"t know if

Edit: Also, I"m very savvy with electronics because I work with them all day. I have never taken apart a phone before and Im worried about taking the screens out. Purchased 3M 2mm dpuble sided tape for it but seriously I"d rather use the phone as is for a year than break it trying to save it for a year and a day... and quite frankly if I ever used tape and glue to secure parts in the stuff I work on I"d be fired. No wonder phones are broken so easily. They"re glued together!

Maybe the apartment above yours has sprung a water leak. Or perhaps your teen tripped in the living room, spilling soda all over the TV. Either way, now your TV is wet, and it’s not working like it used to. Learn what to do if your TV got wet and how to know when it’s time to shop for a new one.

A small spill or minimal condensation on your TV may not cause irreparable damage as long as the water doesn’t reach the primary power sources. But even just a small amount of water on the circuit board can lead to permanent TV damage and short-circuiting.

Start by unplugging the TV. Then, wipe up the water with a non-abrasive cloth to avoid scratching your screen. Give your TV plenty of time to dry, and ensure that every drop of water has been wiped up so that it doesn’t soak into your television.

If your TV has sustained heavy water damage, it’s likely beyond repair, and you may need to replace or upgrade your television. However, any attempted repairs should be done by a professional.

Allow your TV to fully dry and have it inspected by a certified technician. A professional will be better equipped when determining the extent of the damage. Taking your television apart yourself could put you at risk of serious injury and may void the warranty. It’s always best to check your TV manufacturer’s warranty information before having any repair work done.

If you have a water-damaged TV screen, you’ll likely know pretty quickly once you’ve turned it on. A water-damaged LCD screen is usually not repairable, as water can settle between the layers of the liquid crystal display and can be very difficult to dry. In this situation, consider replacing your water-damaged TV with a new one.

Your TV’s remote control may be a little more forgiving of water damage than your television. If you’ve spilled water on your remote, quickly remove the battery cover and batteries. Then, use a soft, non-abrasive cloth to wipe all the water off the remote. If the water spill was minimal and doesn’t appear to have gotten inside, wiping it and setting it out to dry should be enough.

If there was a big spill or the remote was submerged in water, it likely has internal water damage, making it less likely to continue working. Remove the battery cover and batteries, wipe the remote down, and place the remote in a zip-top bag filled with dry rice. Let the remote sit for 1-2 days before removing.

Replacing a water-damaged TV remote may not be as big of a deal with tons of universal and replacement remotes available. But a water-damaged TV is a different story!

Water and technology are not usually happy bedfellows, so suddenly seeing your precous iPhone plummet into the sink, bath or any other body or water can be a heart-stopping moment. But, don’t panic, all may not be lost as modern phones are far more robust than those of yesteryear. In this article we explain the best strategies for dealing with a wet or water-damaged iPhone.

If you’ve purchased a new iPhone in the last few years, then there’s a very good chance that it will be water-resistant, meaning it should happily survive short dips and the odd spilled beverage or two.

Smartphones, and other electronic devices, can be certified with something called an Ingress Protection or IP Rating. This instantly lets you know how water-resistant the product is, so you don’t have to freak out if it slips out of your back pocket and drops into the loo (it happens!) There are multiple types of IP rating, but the two main ones that apply to iPhones are IP67 and IP68.

Of course, things can still go wrong even with an apparently waterproof iPhone. If there is any residual water on or in your device after the incident you should follow the advice below.

If your iPhone is switched on, you’re looking at two unappealing options: power down (but in the process cause the screen and operating system to wake up briefly before switching off) or leave the device in sleep mode and hope you don’t get any notifications.

Now we need to draw as much interior liquid out as possible. Resist the temptation to use a hair dryer or other heat treatment, as this can damage the iPhone’s internal components.

You need enough of them to cover the iPhone. You may be able to buy them en masse from a craft shop, but you can easily buy multipacks on Amazon. Silica gel sachets should dry a wet iPhone out more efficiently and less messily than rice, but you’ll still need to give the iPhone at least 48 hours to dry out completely.

If you’re really worried that there’s liquid inside your iPhone, and confident about doing DIY repairs, then there is always the option of opening up the device and drying it out. iFixit is a great site that takes you step-by-step through repairs and lets you know how tricky they may be before you begin.

If it’s possible it could be worth taking the battery out (as it minimises the potential for short circuits), but this can be quite a challenge with the adhesive approach Apple usually adopts for internal components. If you can, apply a soft dry cloth to all interior surfaces while endeavouring to be as gentle as possible.

There is a last thing you can try if you find that water may be in your device. While most iPhones are water-resistant, it doesn’t stop water from getting into the speaker grilles. Apple Watches comes with a built-in feature that can be toggled to ‘eject’ the water by playing a specific frequency, clearing out its speaker grilles in the process. Why iPhones don’t feature a similar option is something of a mystery, but there is a relatively easy way to get the same results via a free app called Sonic (the Tone Generator, not the hedgehog).

Simply download the app and tap the water droplet icon in the middle of the screen. This should cause the water to ‘jump’ from the speaker so you can absorb it with a tissue. A paid version also offers other frequency ranges, so if your music or podcasts sound a bit garbled after the iPhone takes a dip, this is well worth a go.

Long story short, whenever I tap my screen it thinks I"m tapping somewhere else. Everything else about the phone is fine. Screen isn"t cracked, audio works, it boots up fast and the screen never flickers. The only problem is the touch screen doesn"t want to let me touch what I want to touch. I have the option in Developer Mode to show my touches. And I can see that they are everywhere except where my finger is.

Hello friends Today I will tell you a trick on how to fix a water damaged touch screen phone. Users can get rid of water from LCD, LED or OLED screen of your Smartphone. You don’t need to use any external hardware. You can fix all the blur screen of your Phone. Just a simple and 100% Working method to fix your Smartphone Touchscreen. Don’t Panic if you have dropped the phone in water and screen stop working.

There are several ways on how to fix a water damaged touch screen phone. You can fix touch screen on your Android Phone without any external hardware. You can fix your LCD touch screen without any additional repair. Follow all the steps listed below and fix a water damaged touch screen phone.

We accidentally drop our smartphone in water many-a-times and if quick actions are not taken. Then, there is assured water damage to the phone. First of all, make your phone out of the water as quickly as possible to prevent much water penetrating inside of it through the holes and cracks. Once it’s out of the water, there are certain things you have to do and undoubtedly more important things you have to avoid doing to ensure the damage prevention. Make sure you read the complete guide and follow every step listed below. We will use rice to soak water from our Smartphone. This method is safe and secure to follow.

Now, dry your phone by soaking the liquid from your phone using a paper towel or cloth. Try not to spread the liquid around as it may enter into openings in the phone and damage it further. Just soak the liquid by using the cloth over it.

Not many people know that rice has excellent absorbing property and is widely used for drying off tablets and smartphones by professionals. You can also get phone drying pouches available in the market and keep them in your house for an emergency. You have to put your phone in rice as quickly as possible.

Now leave your phone to dry in this condition for a couple of days. Do not take it out and try to switch it on before that. While the phone is drying, you can use a spare one for your daily needs if you have any.

Now, Switch on your phone and It will start functioning normally. Still, keep a close eye on it for next few days. Check your speakers by playing music on it and make sure your touch screen is working smoothly just like before.

You have successfully averted a crisis and managed to salvage your phone screen from permanent water damage. In a majority of the cases, this method will work and fix Smartphone touchscreen. But if it is not fixed. Then, then you may have damaged the hardware of your Smartphone. So make sure you visit directly to the company service center. Make sure you visit only company service center. Don’t visit any local vendor to repair your touchscreen as it can be very risky.

Repairing water damaged phone is costly. The company is charging whopping 20% to 40% of Phone cost. A screen is one of the most critical parts of the Smartphone. It cost 20% to 40% of value on your Phone. So make sure you follow this method on how to fix a water damaged Touch Screen phone, and I am 100% sure that it will remove all water content from your SmartPhone.

There are several other methods to fix a water damaged touch screen. But they are not easy to follow. People may destroy their Touchscreen by using other methods. This method is safe as it doesn’t have any adverse effect on Phone touch screen. Trust me this technique will also work and will share with others. I will suggest you try this method once and fix a water damaged touch screen. Do share your views in the comment section below and don’t forget to share this article with your friends.

Hi, my phone xperia u has a broken screen and the touch system is not working . when it got splashed with water a little bit of water got in i immediately took off the battery and took of its case

It’s impossible to know for sure if it will work or not or whether the water/moisture will affect the touch screen or the display screen or both or something else entirely. Water damage is a tricky thing. Sometimes the cell phone will work fine once it’s dried completely and then all of a sudden something will stop working.

The only way you’re going to be able to tell is to wait for it to dry and then try it. If it doesn’t seem to work then consider attempting the advice in the article above and if that doesn’t seem to work then you might have to look into replacing some of the damaged parts or look into replacing the phone itself. It depends on how extensive the damage is, if any.

Hello, my phone Xperia C suddenly dropped into a swimming pool when i was snapping some photos with my friends. my screen worked just fine after drying it for a whole day but the problem is my touchscreen is not working. the touchscreen does worked at first but after i reset the phone, the touchscreen malfunctioned. could you help me? thank you for your time.

Out of curiosity why did you perform a factory data reset on your cell phone? Was it having other issues as well? Did you reset it to try and fix your touch screen? Did this issue only occur after performing the hard reset?

If you were not having any issues with your cell phones touch screen after it got dropped in the swimming pool and after drying it out completely and this only occurred after the reset then it MIGHT be a software issue (doubtful but possible) and I would suggest connecting your phone to a PC and if the phone will let you then try to reset it again using Sony’s PC companion.

Sometimes you can combat the negative effects that moisture can cause to a cell phone and sometimes you can’t. Did you have the opportunity to try the 99% alcohol bath yet? If you have and your touch screen is still unresponsive then you might have to replace the touch screen in order to get your phone to respond and function properly again.

when i switch my phone on it shines a pale blue light on the screen but nothing else. my touch screen and everything else on my phone is working. i had tried the rice method for a day before i looked at this and it stayed the same although it used to show “nokia” and glitch and now it doesnt. i dropped it in sea water yesterday and my local shops don’t sell that 99% alcohol. i need help please. i need a working phone!!!!!

Yes, 99% isopropyl alcohol can be difficult to find in local stores. 70% seems to be the standard mixture and what is often the most commonly available. I do NOT recommend anything less than 99% though. While isopropyl alcohol is NOT a conductive liquid the greater part of that other percentage of liquid found within that container is going the be water which IS a conductor and if you choose to use less than 99% than it increases the possibility of causing an electrical short and you take an unnecessary risk of causing damage to the cell phone.

Another thing that can be disconcerting is that bathing a phone in 99% isopropyl alcohol is NOT a guaranteed fix for a cell phone experiencing issues after being dropped in water. If your display screen was damaged when exposed then this trick isn’t going to work and the screen will have to be replaced or a different phone will have to be purchased.

I had my phone in my back pocket of my shorts and it fell in the toilet. I dried it quickly and it still acted up. First the screen blacked out for about 5 minutes but I could still receive calls. Then it lit up again but just for good measure I left it in rice over night. The next morning I kept getting the indicator that I plugged in a headset and it got stuck there for about a minute. Now I can touch my phone and everything works except…. the phone will not read my SIM card. I tried putting my card in another phone to check if it worked and it did, so I know its the phone. What else can I do??

Ok, so the display screen was acting up but is now fine (that’s good), the charging port was having issues but that seemed to go away too (if it happens again check out this Charging Issue Guide as you might have to physically adjust or clean that port), but the SIM card is having issues. Which stinks because without a SIM card you won’t have service… You established that it’s not because the SIM card was damaged (good job) and that the issue lies with the phone itself.

I know that the LG G2 is not designed to allow you to remove the battery but before you start cleaning the phone, just as a precaution, I suggest that you power it off completely. Alcohol usually dries pretty fast but depending on how much alcohol you end up using I would give it enough time to dry all the way before putting everything back together again and before powering it back on. Once it’s dry then you can reinsert the SIM card and give it a try.

I accidentally dropped my phone (samsung s4) in water. i immediately turned off the phone n kept it in rice. Phone is getting turned on but sim card is not getting detected. Could someone suggest me what i should do to make it work.

For example, a few moments of being submersed would require it to be in the rice for 3 days and longer time the submersion up a week from what I read. Actually, this occurred with me and that was what I read and therefore, I am unable to at this time personally, verify how successful this drying technique would be.

Also, from the information that I read the phone should not be turned on or charged even though your immediate reaction would be to find out if it will work after contact with water. However, don’t worry if you did turn your phone on because, the author indicated he did but, stressed not to attempt to check for operation till after, being left in the rice with the phone being off a sufficient amount of time.

Thank you for contributing to the site. A lot of what you mentioned in your post can be read in this other guide about trying to save a phone dropped in water. You might find some additional tips that can help you if your phone is in the same situation.

So i dropped my G2 in the tub while bathing my 3 yr old….i took it out right away and the screen went from lit to black. I have had it in rice for days..still no screen….you can tell the phones on…just still a black screen…i don’t know how you open the thing….is there any chance it will work again.

Sorry to hear that your LG decided to join your 3 year old in the bath. If you can tell that the phone is on but the screen remains black then the display screen is malfunctioning (it may have been damaged by the water). Try the Alcohol trick described in this article. You might just get lucky and it might resolve your issue. If it doesn’t then you will likely need to replace your G2’s display screen yourself, or take it into a local repair shop to have them replace it for you.

It might work perfectly and it might not… 70% alcohol is going to contain approximately 30% water which I suppose is better than 100% water; so if you dropped your cell phone in water then Yes 70% might help to clean out some of that water as well as help your phone to dry quicker so you might choose to try it.

Just remember that the less alcohol you use the more water gets introduced into your phone and water and electronics don’t get along very well together. You want to get that water OUT of your phone not introduce water INTO the phone… even if it is only 30% or 9% water.

It’s always hard to tell when it comes to possible liquid damage and I am not sure how the sea water affected your cell phone but I would definitely recommend trying the advice in the article above. Salt water might do a number on your cell phone and an Alcohol bath should help get in there and help clean all that out.

Hi, my smartphone fall in the water recently. But after it dried up, i can turn on the phone but i notice that there are some black spots on the screen. The camera can’t focus well when taking picture. Other than that, everything is function well. May I know this situation is due to what reason? Is there any component in the phone that has been affected by the water?

From your description is sounds like the camera was effected and your display screen was effected. You got lucky though, water can do far worse to a cell phone and if everything is functional on your phone and you can still use it for the most part than be very grateful and enjoy it.

i had my phone in my back pocket wearing high-waisted pants and when pulling down my pants my phone fell in the toilet, i took of the charger and case right after and let it dry over night. when i woke up to check on it, it turned on and the screen was flickering then went black but u can still hearing turning on and i left it like that and i started getting messages and was able to unlock my phone but you still cant see the screen, the screen is able to touch and work but your not able to see it. please help me i cant afford to buy a new one at the moment.

Like many other people your poor unlucky and unfortunate cell phones display screen has had a negative outcome after coming in contact with liquid. The “flickering” doesn’t sound good either (good description by the way). A flickering could indicate a greater chance that the display screen has been damaged and if the advice above doesn’t help resolve the issue then you will most likely need to replace that display screen on your device.

Hello, I need HELP!!! My phone was updating, but I accidentally took the battery out but now it won’t come on. I was told it had water damage but it was never near water. Is there a way it can come back on some how?

my iphone screen is shattered and I spilt water on it a while back so I was just wondering if I soaked it in the alcohol now if it might work but it still works but the screen is black. ive been using a track phone to replace it and I dropped it in water, i soaked it in alcohol but the screen is still glitching, I used 91% alcohol instead of 99% should I try again with 99%?

Since your screen is shattered there is no question of whether or not your iPhone is damaged but I don’t think you lost anything by trying the alcohol trick and I admire the fact that you at least gave it a try. At this point I think you will need to look into your repair and replacement options.

I recommend that you take it off of the boiler (you don’t want to inadvertently cause heat damage to the phone). Then I would take the battery out of the phone for a good 5 minutes, plug it back into the phone and then try to turn it on again. A battery icon is a good sign but a strange one. Is the battery icon on the screen to show that the phone is charging or is it just an LED light on the phone?

Hi my phone had fallen in the toilet. I took it out immediately and took it apart to wipe it off to dry it. My phone turns on but the screen stays on the home screen and I can’t swipe it to unlock it or to answer it. The screen is pretty much unresponsive. What do I do?

If the Alcohol trick doesn’t work then you will need to look into replacing your cell phones touch screen as it has been damaged and is no longer working properly.

Power related issues such as not being able to charge a phone properly after it has been exposed to water is one of the more common side effects of moisture and liquid damage on a cell phone. If I was in your position I would power your Samsung OFF, remove the battery, and take some alcohol and a Q-tip and give that charging port a really thorough cleaning. Try to get everything nice and clean and shiny again. Hopefully the charging port didn’t experience any permanent damage and hopefully a good cleaning will get it to recognize the charger and allow your Samsung to charge properly again.

As far as trying to fix those little black lines on your screen it might be slightly difficult and may not be possible. You got nothing to lose by trying though. If this happened to my phone then I would start by checking the flex cable that attaches the display screen to the phone. You will have to take your cell phone apart, but since the display isn’t having issues with a singular pixel (which would likely point to a damaged screen) and it’s a whole line (or lines) of dead pixels there is a good chance that the issue lies with that flex cable that or more specifically with the connection between the display screen and your phones motherboard.

So you could take your cell phone apart, check that cable, give it and where it connects a good cleaning with alcohol, see if it helps and if it does then enjoy. If checking and cleaning that cable doesn’t seem to help and you have tried a full alcohol bath (as suggested in the article above) but you continue to have problems and cannot handle seeing those annoying black lines on your display then you might need to invest in a replacement display screen.

Sorry to hear about your Sony Xperia SP. If this should ever happen again try not to put it on your radiator (or any heat source for that matter) as the heat from the radiator might cause additional damage to the phone which of course you want to try to avoid. Good job with the rice though; rice is excellent at absorbing moisture and is one of the most common tricks used to dry out a cell phone that’s recently been dropped in water.

Believe it or not my brother just had the same issue with his Samsung Galaxy S4 (it wasn’t a bathroom accident but he did drop his phone into water). Like the advice listed in this article I suggested that he try the 99% alcohol bath, which he did and left his phone completely submerged in the alcohol for about two or three hours. We then removed it from the alcohol and put it into a bag of rice sealed it, as it was a Ziploc bag, and let it sit for about eight hours to dry out completely. Lo and behold we put the cell phone all back together, put the battery back in, put the SD card back in, the SIM card back in, etc. and guess what… it powered on.

If you can still see a water bubble and it looks like there’s liquid underneath the display screen then I would wait. I would not risk turning on the phone if there is a possibility of moisture still present in the phone as it may cause an electrical short.

Now if your cell phone has been drying in rice for three days and it is still not completely dry yet then you might want to consider submerging the phone in 99% alcohol as not only will the alcohol create a chemical bond with the water (helping to dilute the water and remove it from the inside of the phone), but it will also help the phone to dry out quicker which should speed up the drying process. This might also help to clean out any soap residue that might have been in the washing machine at the same time as your phone and may have gotten into the phone as well. Just another thing that you might want to consider.

My girlfriend’s phone got damaged when her bottle of tea spilled, soaking her backpack and all its contents (including her phone). I dried it off in a box of rice, then tried turning it on. The power button alone did nothing, but plugging in the USB cable caused it to display the “Google” screen, then it would immediately turn off, and repeat this in a cycle. We were going to send the phone in for service, but noticed the water damage stickers were pink, so I figured we were out of luck as far as the warranty goes.

I read about people fixing water damage with Isopropyl alcohol, so I figured I would give it a try. I took out just the motherboard, soaked it in some 99% alcohol (about 1/2 hr), and brushed it a bit with a nylon toothbrush. I just let it air dry for about 1/2 hr, reassembled the phone. Now when I plugged in the USB cable, I saw a battery charging icon. Progress! Once it got enough charge to turn on, I turned it on, and it booted like normal. Unfortunately, operation was glitchy – in particular, any time sound was playing, it would play for about a second, then stop, and stutter. Also, the camera was completely non functional (camera app just displayed an icon of a camera).

I soaked and brushed all of the disassembled motherboard parts. I also removed and soaked the camera. Again, after a quick dry, I reassembled everything, and, like magic, the phone now works perfectly, including sound and camera functionality. It’s nice being a hero