9 tft lcd led backlight manufacturer

Distributor of component LCDs for equipment which provide high-contrast ratio, color saturation, luminance and performance enhancements such as advanced wide viewing (AWV) for true color fidelity, super-high brightness (SHB) and wide temperature range. Focus on industrial, instrumentation, hand-helds, medical and other low-to-medium volume markets. High-bright LED backlights for outdoor use. LVDS interfaces decrease EMI. Factory installed touch screen solutions. 3.5" to 12.1" QVGA, HVGA, VGA, WVGA, SVGA, XGA, WXGA. Also distributes other related products including LED drivers, lamps, indicators, LED assemblies, segment displays, LED mounts, LEDs, and light pipes. Distributor of electronic components, hardware and fasteners and provides design/value engineering support, fulfillment strategies, procurement services and transactional models to meet specific needs and priorities.

WF90BTWAHLNN0 is an IPS landscape mode 9 inch TFT LCD module with resolution of 1024x600 pixels. This 9" TFF LCD module supports LVDS interface; contrast ratio 800:1 (typical value), brightness 500 nits (typical value). This IPS 9 inch TFT LCD module has a wider viewing angle than TN TFT; the view angle is Left:85 / Right:85 / Up:85 / Down:85 degree (typical value). WF90BTWAHLNN0 is a wide temperature model, and it can operate at temperatures from -30℃ to +80℃ and storage temperatures from -30℃ to +80℃.

You can get 9 inch lcd screen with an operation range that suits your specific application, choosing from a wide selection of suppliers. Source wholesale 9 inch lcd screen on Alibaba.com for your business and enjoy a wide variety and great deals.

9 inch lcd screen (Liquid crystal display) are made of liquid crystals that form digital images made visible through ambient light or through LED backlight. LCDs are used in the place of other displays that are less efficient such as cathode ray tubes (CRTs) and have become the most popular display type on the market.

Explore the extensive selection of wholesale 9 inch lcd screen LCD displays, TFT, and HMI that can be used across a range of industries, including domestic, medical, industrial, automotive, and many others. You can choose from a number of standard industry sizes and find the 9 inch Lcd screen that are applicable to your required use. If you would like options that allow a smaller environmental footprint due to low power consumption, you can browse the Chip-on-Glass (COG) LCDs. COGs are designed without PCBs so have a slimmer profile.

As an Industrial LCD module distributor, we can supply a wide range of TFT LCDs in many sizes. Common resolutions are QVGA, VGA, SVGA and XGA. Wide aspect ratio displays are also available in many similar sizes and resolutions such as WQVGA, WVGA, WSVGA, and WXGA.

Our industrial LCD suppliers are manufacturers with different capabilities specially designed for a wide variety of industrial applications. High-brightness, sunlight readability and long life product guarantees are some of the special features available.

Get in touch to work closely with one of our LCD Solutions Specialists to determine the perfect display for your project. We can also recommend and supply the proper LCD controller board, inverter, LED driver, cables, touch screen, or other associated enhancement.

LCDR5U09-01 is a true manufacturer of LCD CCTV monitor. This monitor is true Commercial Grade with FCC Class A Certification - Built to Run 24 x 7 x 365 continuously. The monitor is designed, engineered and manufactured with CCTV PCB boards and circuitry making these the LCD solution for your security surveillance.

The LCDR5U09-01 is dual 5U Rack Mount Ready LCD CCTV monitors with Tilt capability are designed with a Metal Cabinet and chrome handle is ready to be installed into rack mount cabinets. It is ideal for Factory Control Rooms, Automotive, Marine, Industrial Panel PC, and special Kiosk applications.

I am not 100% sure what this is, but 99% sure it’s interesting – a very large, very light and super-skinny display that uses active matrix LCD technology instead of OLED.

The Taiwanese firm PanelSemi is marketing an active matrix display using mini LED, that is flexible enough to be rolled up and light enough to suspend like a framed poster. It can also be sized and shaped as needed by tiling 9″ inch display “bricks.”

“As the world’s first company to offer the panel foundry business model, we are continuously innovating to build a comprehensive TFT-LCD and semiconductors ecosystem,” says Titus Chang, Vice President AM Mini-LED Display PanelSemi Corporation. “Primary (the 55-inch version of the product) is the culmination of our innovation that we believe will provide infinite opportunities for different businesses, through a high-speed and immersive visual experience for users.”

The Primary display can transform into concave, convex, s-curve, cylinder, and rollable form. Its core is the innovative Active-Matrix (AM) on TFT panel technology that can bond each LED, sensor, and semiconductor intelligently. Research by the National Cheng Kung University (NCKU) also reiterates that the AM technology inside the Primary is safer for viewers as it leads to less dry eyes.

This product is reminiscent of a couple of very different products and technologies – the rollable, wallpaper-thin OLED displays from LG, and the relatively light, relatively thin LED displays introduced to the pro AV market years ago by Nanolumens.

The company suggests interesting use-cases for this could include cylindrical displays, ad posters on curved walls (like on subway platforms and concourses) and ambient ceilings. The form factor is one thing, but I am intrigued by the idea that these things are built by tiling 9-inch units.

This 110-inch Flexible AM ​​Mini LED display, with TFT Active Matrix as the core technology, uses the existing and depreciated 3.5-generation panel production line to produce 9-inch basic modules, which are seamlessly spliced ​​into a 110-inch single large-area display, allowing production Large-area displays do not need to rely on heavy capital investment, and can produce display products of more than 100 inches with existing panel production capacity.”

Dave, definately no LCD inside. We have a 55″ AM flex display unit in our stock. AM technology is known from TFT LCD and OLED displays. Here it is used for inorganic LEDs: very low aging, no burning, low power consumption due to no PWM driving. and very flexible and thin due to missing soldered driver chips like on passive driver based dv LED displays

AUO Corporation ("AUO" or the "Company") (TAIEX: 2409; NYSE: AUO) today announces a full range of 16:9 LCD panels for information technology display applications, among which the world’s first 21.5-inch 1080p Full HD resolution panel for desktop grabs the spotlight. The product lineup will be exhibited at Display Taiwan 2008 at TWTC (Taipei World Trade Center) from June 11 to June 13. It is expected that this 16:9 widescreen trend for IT display will accelerate the pervasion of digital media contents.

To meet the fast growing trend of digital contents, AUO launches 16:9 widescreen series including 4 MoniTV LCD panels: 24-inch Full HD, 21.5-inch Full HD, 18.5-inch and 15-inch, as well as 2 LED notebook PC LCD panels: 15.6-inch and 14-inch. These products provide complete solutions for different market segments. Among the desktop application lineup, the 21.5-inch Full HD model is the smallest of all AUO’s Full HD products. Its excellent specifications of 1080p Full HD high resolution, 1000:1 high contrast and 5ms fast response time can fulfill the requirements for running digital contents. This 21.5-inch TFT-LCD is perfect for students as an entry model to Full HD LCD monitors.

For notebook PC application, both 15.6-inch and 14-inch TFT-LCDs are green products equipped with LED backlight, HD high resolution, 500:1 high contrast and 60% high color saturation. Above all, its innovative bottom PCB structure can effectively diminish the noise when using Wireless Wide Area Network (WWAN).

“16:9 widescreen LCD panels are the trend for information technology display applications, and it is one of our focuses at Display Taiwan 2008 exhibition,” said Michael Tsai, General Manager of IT Display Business Group of AUO.“The migration from 16:10 to 16:9 in widescreen market has gone fast. After AUO launched the 24-inch 16:9 Full HD LCD panel for desktop in the first quarter this year which became a big hit in the market, we released another 3 models for desktop in the second quarter; we will complete our 16:9 lineups for desktop with 27-inch model by the end of this year. In the near future, we plan to utilize LED-backlit green LCD panels for 16:9 desktop products. For notebook PC application, AUO aims to be the forerunner of 16:9 widescreen LCD panels with LED backlight. We will release another 4 LED-backlit panels: 10.1-inch, 11.6-inch, 13.3-inch, and 17.3-inch by the first half of 2009. AUO will take the lead in 16:9 aspect in IT display area, so as to provide consumers better enjoyment in digital media and Full HD contents such as Blue Ray DVD playback or high definition TV broadcasting.”

The Wave II Monitor series include a range of well-designed, rugged LED monitors with all the required marine approvals. The design is based on extensive feedback ...

The Shenzhen TopWay Technology Co.,LTd manufactured the LMT104 SDH01 with an intense brightness LED back light. It consists of a high reliability design for industrial application. The product can generate with 10.4", 800 x RGB x 6000 ...

TOPWAY Color TFT Modules are designed to provide robust and easy to install display products for industrial applications. For many years in business, the broad design experience and the full range of iconic products made ...

Model Name：AMG-19OPDX01T7Screen Size：19"Active Display Area (mm)：376.32(H)x301.06(V)Pixel Pitch (mm)：0.294(H)x0.294(V)Display Mode：Normally whiteDisplay Resolution (pixel)：1280x1024Contrast Ratio：1000:1Touch screen(optional)：PCAP ...

... AccuTouch five-wire resistive -in addition to a combination USB and serial touch controller, DVI, VGA and built-in speakers. The monitor is available in white, touch and non-touch enabled versions.

The HANNspree HP248WJB is a 23.8-inch Full HD monitor featuring an integrated 5Mpixel webcam, microphone array and stereo speakers for video conferencing and live-streaming. The TFT panel delivers ultra-wide ...

Hengstar embedded open display products adopt industrial process, with standard DC 12V power input, 9 ~ 36V optional, working temperature support - 30 ~ ...

... 17" touch monitor features 1280x 1024 resolutions which help you to have the photo images more clear. Furthermore the 4:3 ratio TFT is easy to work with your current applications.

... glass, with excellent touch sensitive. LCD7 with 7" TFT(1024 x 600, max support resolution 1920 x1080), furthermore support headphone Drives, 46mW.

LCD is the abbreviation for liquid crystal display. An LCD basically consists of two glass plates with a special liquid between them. The special attribute of this liquid is that it rotates or “twists” the plane of polarized light. This effect is influenced by the creation of an electrical field. The glass plates are thus each coated with a very thin metallic film. To obtain polarized light, you apply a polarization foil, the polarizer, to the bottom glass plate. Another foil must be applied to the bottom glass plate, but this time with a plane of polarization twisted by 90°. This is referred to as the analyzer.

In the idle state, the liquid twists the plane of polarization of the incoming light by 90° so that it can pass the analyzer unhindered. The LCD is thus transparent. If a specific voltage is applied to the metallic film coating, the crystals rotate in the liquid. This twists the plane of polarization of the light by another 90°, for example: The analyzer prevents the light getting through, and the LCD thus becomes opaque.TN, STN, FSTN, blue mode, yellow-green mode

Liquids that twist the plane of polarized light by 90° are referred to as TN (Twisted Nematic). STN (Super Twisted Nematic) liquids twist the plane of polarized light by at least 180°. This gives the display improved contrast. However, this technology does color the display to a certain extent. The most common colors are referred to as yellow-green and blue mode. There is also a gray mode, which in practice is more blue than gray, however.

However, the different colors occur only in displays that are either not lit or that are lit with white light. If there is any color in the lighting (e.g. yellow-green LED lighting), it overrides the color of the display. A blue-mode LCD with yellow-green LED lighting will always appear yellow-green.Static or multiplex driving method

Small displays with a small viewing area are generally statically driven. Static displays have the best contrast and the largest possible angle of view. The TN technology fulfills its purpose to the full here (black and white display, reasonably priced). The bigger displays get, however, the more lines become necessary in static operation (e.g. graphics 128x64=8192 segments =8192 lines). Since there is not enough space on either the display or a driver IC for so many lines, multiplexing is used. The display is thus divided up into rows and columns, and there is a segment at each intersection (128+64=192 lines). Scanning takes place row by row (64x, in other words a multiplex rate of 1:64). Because only 1 row is ever active at any one time, however, the contrast and the angle of view suffer the higher the multiplex rate becomes. This makes it essential to use STN.Angle of view 6°°/12°°

Every LCD has a preferred angle of view at which the contrast of the display is at its optimum. Most displays are produced for the 6°° angle of view, which is also known as the bottom view (BV). This angle corresponds to that of a pocket calculator that is lying flat on a desktop.

LCDs without lighting are hard to imagine these days. However, since there are basically four different types of lighting, the type selected depends very much on the application. Here is a brief overview to clarify the situation:LED

Standard LCDs have a temperature range of 0 to +50°C. High-temperature displays are designed for operation in the range from -20 to +70°C. In this case, however, additional supply voltage is generally required. Since the contrast of any LCD is dependent on the temperature, a special temperature-compensation circuit is needed in order to use the entire temperature range, and this is particularly true for high-temperature displays (-20 to +70°C). Manual adjustment is possible but rather impractical for the user.

However, the storage temperature of a display should never be exceeded under any circumstances. An excessively high temperature can destroy the display very quickly. Direct exposure to the sun, for example, can destroy an LCD: This is because an LCD becomes darker (in positive mode) as it gets hotter. As it gets darker, it absorbs more light and converts it to heat. As a result, the display becomes even hotter and darker... In this way, temperatures of over 100°C can quickly be reached.Dot-matrix, graphics and 7-segment displays

The first LCDs were 7-segment displays, and they are still found today in simple pocket calculators and digital watches. 7 segments allow all of the digits from 0 to 9 to be displayed.

The semiconductor industry now offers a very large range of LCD drivers. We generally distinguish between pure display drivers without intelligence of their own, controllers with a display memory and possibly a character set, and micro-controllers with integrated LC drivers.

Pure display drivers work in a similar way to a shift register. They generally have a serial input. They require an external pulse, and in multiplex operation with high frequency they require new display data continuously in order to achieve a refresh frequency that is as high as possible (MSM5219, UPD7225, HD44100, LC7942, etc.). An example of a genuine controller is theHD44780 for dot-matrix displays: Once it has received the ASCII code, the controller manages its character set, memory and multiplexing entirely on its own. The following controllers are widely used for graphics displays: HD61202/3, HD61830, SED1520, SED1330, T6963.

Many ask themselves, "What is the difference between an LCD display and a TFT-display?" or "What is the difference between a TFT and an OLED display?". Here are these 3 sometimes extremely different display technologies briefly explained. LCD vs. TFT vs. OLED (comparison).

- The LCD (Liquid Crystal Display) is a passive display technology. The operation and the structure are described above. Passive means that an LCD can only darken or let out light. So it always depends on ambient light or a backlight. This can be an advantage because the power consumption of a LCD display is very, very low. Sometimes even less than the accumulated power consumption of an E-paper display, which in static operation requires absolutely no energy to maintain the content. To change the contents, however, a relatively large amount of power is required for an E-paper display.

LCDs can also be reflective, so they reflect incident light and are therefore legible even at maximum brightness (sunlight, surgical lighting). Compared to TFT and also OLED, they have an unbeatable advantage in terms of readability and power consumption :; the "formula" is: Sunlight = LCD.

- A TFT-display (of Thin-Film Transistor) is usually a color display (RGB). From the construction and the technology it corresponds to the LCD. It is also passive, so it needs a backlight. This is in any case necessary except for a few, very expensive constructions. However, a TFT needs much more light than the monochrome relatives, because the additional structures on the glass as well as the additional color filters "swallow" light. So TFTs are not particularly energy-efficient, but can display in color and at the same time the resolution is much higher.

- OLED displays (by Organic-Light-Emitting-Diode) are as the name implies active displays - every pixel or sign generates light. This achieves an extremely wide viewing angle and high contrast values. The power consumption is dependent on the display content. Here OLEDs to TFTs and LCDs differ significantly, which have a nearly constant power consumption even with different display contents. Unfortunately, the efficiency of converting the electric current into light energy is still very poor. This means that the power consumption of OLEDs with normal content is sometimes higher than that of a TFT with the same size. Colored OLEDs are increasingly used in consumer devices, but for the industry, due to their availability and lifetime, currently only monochrome displays are suitable (usually in yellow color).

In the reaction time, the OLEDs beat each TFT and LCD by worlds. Trise and Tfall are about 10μs, which would correspond to a theoretical refresh rate of 50,000 Hz. Possibly an advantage in very special applications.

Finally the question "What is better, LCD, OLED or TFT?" Due to the physical differences you can not answer that blanket. Depending on the application, there are pros and cons to each individual technology. In addition to the above differences, there are many more details in the design and construction that need to be individually illuminated for each device. Write us an e-mail or call us: we have specialists with some 20- and 30-year experience. We are happy to compare different displays together with you.AACS and IPS technology

Once more the new AACS technology (All-Angle-Color-Stability) improves the color stability for different viewing angles. It"s providing same color for 90° straight view as for 20° or 160° bottom or top view. There"s no more color shift or inverting effect.

Raystar is a professional TFT (Thin Film Transistor) module manufacturer. There are different models of our TFT active matrix display with various features. Whether you need TFT display with control board, high brightness, wide viewing angle, monochrome, bar type, we have some options for you to choose from. We also offer customization service of backlight and FPC. The available diagonal sizes of our standard TFT display modules are 0.96", 1.77" 2.4", 2.8", 2.84", 3.5", 3.9", 3.97", 4.3", 4.6", 5", 5.2", 5.6", 5.7", 6.2", 7", 8", 8.88", 9",10.1", 10.2", 12.1" and 12.3.

Asia has long dominated the display module TFT LCD manufacturers’ scene. After all, most major display module manufacturers can be found in countries like China, South Korea, Japan, and India.

In this post, we’ll list down 7 best display module TFT LCD manufacturers in the USA. We’ll see why these companies deserve recognition as top players in the American display module industry.

STONE Technologies is a leading display module TFT LCD manufacturer in the world. The company is based in Beijing, China, and has been in operations since 2010. STONE quickly grew to become one of the most trusted display module manufacturers in 14 years.

Now, let’s move on to the list of the best display module manufacturers in USA. These companies are your best picks if you need to find a display module TFT LCD manufacturer based in the United States:

Planar Systems is a digital display company headquartered in Hillsboro, Oregon. It specializes in providing digital display solutions such as LCD video walls and large format LCD displays.

The company started in 1983 as a corporate spin-off from the American oscilloscope company Tektronix. In 2015, Planar Systems became a subsidiary of the Chinese manufacturer Leyard Optoelectronics.

Planar’s manufacturing facilities are located in Finland, France, and North America. Specifically, large-format displays are manufactured and assembled in Albi, France.

Microtips Technology is a global electronics manufacturer based in Orlando, Florida. The company was established in 1990 and has grown into a strong fixture in the LCD industry.

Taiwan and Mainland China are two Asian countries where Microtips set up their manufacturing plants. The factories boast of modern equipment, high-quality raw materials, and stringent quality control measures. Microtips even earned ISO9001 and ISO14001 certifications for excellent quality management.

What makes Microtips a great display module TFT LCD manufacturer in the USA lies in its close ties with all its customers. It does so by establishing a good rapport with its clients starting from the initial product discussions. Microtips manages to keep this exceptional rapport throughout the entire client relationship by:

Displaytech is an American display module TFT LCD manufacturer headquartered in Carlsbad, California. It was founded in 1989 and is part of several companies under the Seacomp group. The company specializes in manufacturing small to medium-sized LCD modules for various devices across all possible industries.

The company also manufactures embedded TFT devices, interface boards, and LCD development boards. Also, Displaytech offers design services for embedded products, display-based PCB assemblies, and turnkey products.

Displaytech makes it easy for clients to create their own customized LCD modules. There is a feature called Design Your Custom LCD Panel found on their site. Clients simply need to input their specifications such as their desired dimensions, LCD configuration, attributes, connector type, operating and storage temperature, and other pertinent information. Clients can then submit this form to Displaytech to get feedback, suggestions, and quotes.

A vast product range, good customization options, and responsive customer service – all these factors make Displaytech among the leading LCD manufacturers in the USA.

Products that Phoenix Display offers include standard, semi-custom, and fully-customized LCD modules. Specifically, these products comprise Phoenix Display’s offerings:

Clients flock to Phoenix Display because of their decades-long experience in the display manufacturing field. The company also combines its technical expertise with its competitive manufacturing capabilities to produce the best possible LCD products for its clients.

True Vision Displays is an American display module TFT LCD manufacturing company located at Cerritos, California. It specializes in LCD display solutions for special applications in modern industries. Most of their clients come from highly-demanding fields such as aerospace, defense, medical, and financial industries.

The company produces several types of TFT LCD products. Most of them are industrial-grade and comes in various resolution types such as VGA, QVGA, XGA, and SXGA. Clients may also select product enclosures for these modules.

All products feature high-bright LCD systems that come from the company’s proprietary low-power LED backlight technology. The modules and screens also come in ruggedized forms perfect for highly-demanding outdoor industrial use.

LXD Incorporated is among the earliest LCD manufacturers in the world. The company was founded in 1968 by James Fergason under the name International Liquid Xtal Company (ILIXCO). Its first headquarters was in Kent, Ohio. At present, LXD is based in Raleigh, North Carolina.

Cystalfontz America is a leading supplier and manufacturer of HMI display solutions. The company is located in Spokane Valley, Washington. It has been in the display solutions business since 1998.

Crystalfontz takes pride in its ISO 9001 certification, meaning the company has effective quality control measures in place for all of its products. After all, providing high-quality products to all customers remains the company’s topmost priority. Hence, many clients from small hobbyists to large top-tier American companies partner with Crystalfontz for their display solution needs.

We’ve listed the top 7 display module TFT LCD manufacturers in the USA. All these companies may not be as well-known as other Asian manufacturers are, but they are equally competent and can deliver high-quality display products according to the client’s specifications. Contact any of them if you need a US-based manufacturer to service your display solutions needs.

We also briefly touched on STONE Technologies, another excellent LCD module manufacturer based in China. Consider partnering with STONE if you want top-of-the-line smart LCD products and you’re not necessarily looking for a US-based manufacturer. STONE will surely provide the right display solution for your needs anywhere you are in the globe.