note 10 lcd screen replacement free sample

Replacing the display is the most complex and therefore also the most difficult repair of the Note 10+. Both the back cover and the battery are heavily bonded. In addition, all components are built into the display unit and must therefore all be removed. Plan enough time for the repair though.

We wish you much success with your repair! You can find the right original replacement screen for your Galaxy Note 10+ as well as the Samsung tool kit in our online store.

Ive been looking around on every website I could find on how to replace the screen on the Samsung Note 10.1 2014 Edition. After connecting the dots, I"m glad to say I have successfully replaced it.

Follow the tutorial on how to disassemble the Note on Youtube. If you don"t find the right Note edition, you might still be able to watch it and get a general idea on how to disassemble.

Once the Note is successfully taken apart, use the heat gun and go along the edges around 6-8 inches away from the tablet. Be Careful NOT to over heat the tablet. Id say around 20 sec. You can always touch the screen to judge your heat application.

Than, get a very small flat-head and press it in between the screen and the frame of the tablet. The frame is grey, so you want to get under the black adhesive. Push down about a mm or so and pry GENTLY away from the frame (using the edge of the frame as leverage) and follow around the edges. Do this until you make it all around and follow through with another go-around, but this time (as you go deeper) you want to pry down until you get to the LCD, which is noticeable by a thin white frame around the screen itself. Keep your eyes in between the screen and the frame so you know when you"ve reached the LCD. I suggest this method because if you try to undo the adhesive up to the LCD at the first site, your more than likely to pry it along with the screen: which is more likely going to cause damage.

NOTE: Start at one of the top corners. Do NOT start at the bottom towards the button. Be very cautious at the bottom because you might cut the sensors leading to "back" and "settings" touch screen buttons. The actual, physical "home" button is just wedged into the frame on both sides by small rings and can easily be dislodged with a little pressure/pry.

Once you"ve cleared the edges, apply heat to the LCD screen (again, to-the-touch is preferred) than slide your card in and start a SLOW, "cutting" motion parallel to the screen. You can also just try to press the card down in between the screen and the LCD to separate it and pull out as you work your way around the tablet. Try to avoid bending the screen too much cause its gonna put pressure on the LCD at the angle and possibly damage it. Continue "cutting" around the edges but AVOID the button area (for the same reasons stated earlier). Keep the same concept in mind when you were prying the edges. Work your way around until the last part (which would be the button area) and slowly separate the screen from the LCD.

The screen is now off, but there is a lot of glue on the LCD. this is were I got the tweezers and started CAREFULLY picking at the glue chunks. Then, dab the screen with the glue you picked up off the screen. As you start dabbing, the glue will slowly get picked off onto your tweezers. be careful and take your time cause the tweezer edges can scrape the LCD as you do this.

Once most of the glue is off, lightly heat the LCD to slightly melt the leftover adhesive and use the eraser. LIGHTLY erase the blotches and use a cleaner to smear away the glue. I personally used coffee filters for the LCD cleaning but thats only because I had nothing else and I didn"t want to get lint all over the sticky screen. Do this several times over until the LCD is cleaned. CAUTION: be careful not to let the cleaner seep into the edges of the LCD.

after the screen is cleaned, place the double sided sticky take on the sides and re-seal. I didn"t us suction cups. however, what I found helpful is to center the button hole on the screen to the actual button.

I have a small black blotch that is about a mm wide at the bottom of my screen now because I was a little too anxious and frustrated. Be very careful and don"t rush. Hope this step-by-step guide helps. It might not be the quickest way, but it works.

However, if the digitizer or LCD is also damaged during a fall, that screen no longer carries value because it cannot be refurbished. Repair shops cannot sell broken LCDs to refurbishing companies; therefore, they cannot offset the cost of an LCD repair. That is why repair stores often charge a little extra if there is damage to the LCD or digitizer, to make up for that loss. Repair stores that don’t have an additional charge for an LCD repair typically inflate their glass repair price to make up for the loss from damaged LCDs. If they have one price, that means everyone is paying more to cover the cost of customers who have damaged LCDs and customers who only have cracked glass. This is why TCR separates the price of glass and LCD repairs for you! If you only have cracked glass, you only have to worry about paying to replace the cracked glass.

If your phone or tablet’s glass is shattered there will be cracks or chips on the screen itself. If it is just the glass that is damaged, the device may still function and you may be able to use it normally. If this is the case, it is likely that only the glass needs to be replaced. To prevent further damage to your device it is best to get it repaired quickly. For example, if liquids seep through the cracks it could cause permanent damage to the LCD.

Many people may continue to use their touchscreen with shattered glass and delay fixing the glass on their devices; however, if the touchscreen isn’t responsive, it could be a sign of more significant damage to the device’s digitizer which is integrated with the LCD screen.

A pixelated screen can indicate LCD damage. This would look like a patch of multicolored dots, a line or lines of discoloration, or a screen with rainbow colors. For many people, these colors are an easy way to know that their LCD is broken and that they should get it repaired.

Dropping your phone isn’t the only reason you’ll end up with a pixelated screen. Over time, your screen’s LCD may break down through regular use. This happens to other devices aside from your smartphone or tablet. Pixelation can happen to TVs and computers, too. People typically decide to buy a new device when this happens. Fortunately, with an LCD repair, you can fix the device without needing to replace it.

A black screen or black spots on your smartphone or tablet is an indication of a damaged LCD. Often with a bad LCD, a phone may still turn on and make noises, but there is no clear picture. This does not necessarily mean any other part of the phone is damaged and a simple screen replacement will get it functioning again. Sometimes it can mean a battery or other internal component is damaged. It is best to have a highly qualified phone repair technician diagnose what is wrong so the appropriate repair can be made.

Fortunately, your mobile device is fixable whether you cracked the glass or damaged the LCD. Stop by or call TCR: Triangle Cellular Repair at (919) 263-2699 for a free diagnostic and quick, affordable cell phone repair in Chapel Hill and surrounding areas. We’re always happy to help!

The app does what it says it does: it reduces touchscreen lag and adjusts sensitivity. My phone was having issues detecting my taps, either by lagging or by not registering my tap. After using this app, all of the touchscreen-related issues were resolved! Just one issue: there"s ads on this app, one even covering the screen, and considering how infrequently one would use this app, putting in ads just seems like a waste of effort. Regardless, it does what it"s supposed to, and that"s great!

A cracked Samsung phone screen can be devastating, especially if you rely on your phone for business, school and your social life. Screen replacement options include cell phone repair services, insurance claims and DIY repair. Here’s a breakdown of each plus associated costs to help you decide which option is best – plus whether it’s worth fixing your phone or if you’re better off selling it broken.

Option 1: Cell phone repair services – $199 to $329 Local repair shops can often replace your Samsung screen in under an hour, so you can get your phone fixed over your lunch break. Online mail-in repair services take longer, but they can be good options if you do not have a qualified local repair shop.

Expect to pay between $199 and $329 for Samsung screen replacement, depending on your model. Some repair shops offer warranties that offer free or discounted parts and labor if your screen fails within the warranty period.

If you have it, phone insurance might be your cheapest option. You can even get same-day screen replacement if an authorized or mobile repair center is nearby. Otherwise, you’ll need to mail your phone in for repair.

Some carrier plans allow you to request a replacement device instead of getting your phone repaired, but that option typically costs more. For example, Verizon insurance charges $29 for screen repairs but up to $249 for replacement.

Option 3: Do-it-yourself (DIY) cracked Samsung phone screen replacement – $92 to $240 You can purchase a replacement screen for your Samsung phone from several phone parts suppliers, including Repairs Universe, Injured Gadgets and FixEZ. Some stores sell screen replacement kits that come complete with tools; otherwise, you’ll need to buy tools separately. Toolkits start at $5.

Expect to pay between $92 and $240 for a replacement screen, depending on your Samsung model, whether your buy new or refurbished and whether you buy the screen with or without the frame (the frame adds around $20 and can make installation easier). Keep in mind that quality varies, and you’ll typically spend more for a high-quality screen. Pricing can also vary by color.

Note that some parts suppliers sell OEM (original equipment manufacturer) parts while other sell aftermarket parts. Some offer both. Here are some example replacement Samsung screen prices (with the frame).Galaxy S20New: $240

How to replace your Samsung screen WARNING: Screen replacement can be a difficult repair, especially if you aren’t experienced. Before you attempt to replace your own Samsung screen, be aware that you risk causing additional damage and you could void any warranties and insurance policies.

You can find detailed step-by-step instructions on sites like iFixit and YouTube. Here are screen replacement videos for the Samsung Galaxy S20, S10 and S9.

Should you fix your Galaxy screen or sell it broken? You might want to base your decision on how much your phone is worth broken versus repaired, especially if you plan to upgrade soon.

For example, at the time of this writing, a Samsung Galaxy S10 128GB on the Verizon network was worth $155 in good condition. Here’s a breakdown of its net value after different repair options.

Galaxy S10 Value – Cost of Repair = Net Value After RepairRepair MethodValue (good condition)– Repair/Deductible Cost= Net Value After Repair

Next, compare the net value after repair to what your Samsung phone is worth in broken condition. At the time of this writing, a broken Samsung Galaxy S10 128GB on the Verizon network was worth $40.

When inspecting a screen, remove any screen protectors and cases first. Tilt the device under good lighting conditions and inspect it at multiple angles. Screen damage includes hairline cracks that are difficult to see.

Wearables like Apple & Samsung watches often don"t have visible LDIs. Check for moisture under the display screen, as well as corrosion, discoloration, and fuzzy growth on the charging connection.

If the device does not fully turn on and load the home screen or if it cannot stay on without being connected to a charger, it"s considered not able to turn on.

No matter how careful you are, accidents happen. Screen damage and liquid damage are not covered under the warranty, so T-Mobile can"t exchange devices with this damage. But, we don’t want you to be stuck with a broken phone, so you have two options to replace or repair your damaged device: