pentair easy touch lcd screen quotation

The EasyTouch Control System eliminates the inconvenience of trips to your pool equipment pad, memorizing operating sequences, opening and closing valves and resetting time clocks and thermostats. With push-button operation and clear, intuitive instructions and displays, your EasyTouch system includes all circuitry and fully programmable controls in a single Load Center installed near your pool or spa equipment. This avoids expensive wiring and installation costs to make an EasyTouch system affordable for any budget.

The EasyTouch® Control System family offers a new level of control for homeowner"s looking for an affordable, easy to use pool/spa control system. EasyTouch allows full control of all pool/spa features including advanced features such as colored lighting and IntelliChlor® Salt Chlorine Generator support. Every EasyTouch system includes an easy to use control panel that is built into the outdoor enclosure. This control panel allows for full system setup, programmability, and everyday operation. In addition, there are several other available remote interface choices. The EasyTouch systems come in a variety of configurations: Pool only or Spa only, Pool/Spa with shared equipment, and also integrated with Pentair IntelliChlor Salt Chlorine Generator.

Now works with ScreenLogic2® Interface software to allow control from an Apple® iPad®, iPhone®, iPod touch® mobile digital device or Android™device, PC or Mac® computer

All functions controlled with easy, one-button access from the self-contained load center or optional controllers. No need to memorize operating sequences, open and close valves, or reset time clocks and thermostats.

Built-in diagnostics include automatic verification of the display, microprocessor, switches, indicators, relay outputs, valve outputs, sensor inputs, and communication ports as well as a diagnostic screen that reports failures for troubleshooting and repair purposes.

For Use With: ScreenLogic 2(R) Interface Software to Allow Control From an Apple(R) iPad(R), iPhone(R), iPod touch(R) Mobile Digital Device or Android(TM) Device, PC or Mac(R) Computer

The EasyTouch® Control System family offers a new level of control for homeowner"s looking for an affordable, easy to use pool/spa control system. EasyTouch allows full control of all pool/spa features including advanced features such as colored lighting and IntelliChlor® Salt Chlorine Generator support. Every EasyTouch system includes an easy to use control panel that is built into the outdoor enclosure. This control panel allows for full system setup, programmability, and everyday operation. In addition, there are several other available remote interface choices. The EasyTouch systems come in a variety of configurations: Pool only or Spa only, Pool/Spa with shared equipment, and also integrated with Pentair IntelliChlor Salt Chlorine Generator.

Now works with ScreenLogic2® Interface software to allow control from an Apple® iPad®, iPhone®, iPod touch® mobile digital device or Android™device, PC or Mac® computer

All functions controlled with easy, one-button access from the self-contained load center or optional controllers. No need to memorize operating sequences, open and close valves, or reset time clocks and thermostats.

Built-in diagnostics include automatic verification of the display, microprocessor, switches, indicators, relay outputs, valve outputs, sensor inputs, and communication ports as well as a diagnostic screen that reports failures for troubleshooting and repair purposes.

For Use With: ScreenLogic 2(R) Interface Software to Allow Control From an Apple(R) iPad(R), iPhone(R), iPod touch(R) Mobile Digital Device or Android(TM) Device, PC or Mac(R) Computer

But, on the ET controller shown below you can see the header that connects the LCD to the main board... in a response above I suggested cutting the header pins, but there"s an easier way that doesn"t destroy the header...

You can heat the header pin between the two boards, as close to the LCD as you can, and then use the pump on the top of the LCD solder joint to suck out the solder. This allows you to heat and pump simultaneously... as soon as the solder melts you hit the pump plunger.

This is a replacement Pentair EasyTouch 8 EC Pool and Spa Control Base System, for two bodies of water, with IntelliChlor transformer built in, one IC40 cell and two actuators. The EasyTouch automated systems with Intellichlor allow you to control the operation of your salt water pool and spa equipment with the touch of a button. Packed with features, the EasyTouch 8 system has UltraTemp Heat Pump Integration, supports two VS or VF pumps (IntelliFlo), supports 8 feature circuits, support for IntelliBrite lights, and more. Some built-in diagnostics include automatic verification of the display, microprocessor, switches, indicators, and communication ports as well as a diagnostic screen that reports failures so you can troubleshoot or make repairs. Simple and easy to use, the EasyTouch 8-function system allows automated controls and scheduling of your pool equipment from the self-contained load center or optional remotes.

The EasyTouch 8 system includes all circuitry and fully programmable controls in a single Load Center unit which can be installed near your pool or spa equipment. For dual bodies of water which share equipment (Pool combinations), this system includes two valve actuators for automatic switching between pool and spa operating modes. It also include one IC40 cell for salt water sanitation of pools up to 40,000 gallons. For added convenience, wireless remote control devices can be added to any EasyTouch system. The EasyTouch system has a wide array of accessories to add to your pool automation experience.

With the EasyTouch 8 system, scheduling and controlling the operation of your pool and spa equipment is a breeze. Pentair EasyTouch systems set the standard for operating simplicity with push-button operation and clear, intuitive instructions and displays. There is no need to memorize operating sequences, open and close valves, or reset time clocks and thermostats. The EasyTouch family offers even more features, options and technology and also is one of the simplest programs to operate.

EasyTouch systems set the standard for operating simplicity with push-button operation and clear, intuitive instructions and displays. Use this model if you have a pool and spa combo. If you have a pool or spa only, use the pool or spa only model.

The new EasyTouch family offers a new level of control for homeowner looking for an affordable, easy to use pool/spa control system. EasyTouch allows full control of all pool/spa features including advanced features such as colored lighting and IntelliChlor chlorine generator support. Every EasyTouch system includes an easy to use control panel that is built into the outdoor enclosure. This control panel allows for full system setup, programmability, and everyday operation. The EasyTouch systems come in a variety of configurations: Pool only or Spa only, Pool/Spa with shared equipment, and also integrated with Pentair unique IntelliChlor salt chlorine generator.

Built-in diagnostics include automatic verification of the display, microprocessor, switches, indicators, relay outputs, valve outputs, sensor inputs, and communication ports as well as a diagnostic screen that reports failures for troubleshooting and repair purposes

Indoor control panel (for 4 or 8 circuit systems), Wireless controller (for 4 or 8 circuit systems), QuickTouch 4-function wireless remote, Four-function spa-side remote

Benefits and Advantages of Pentair’s EasyTouch Automation SystemAll functions controlled with easy, one-button access from the self-contained load center or optional controllers. No need to memorize operating sequences, open and close valves, or reset time clocks and thermostats.

Optional controllers for added convenience: Indoor control panel (for 4 or 8 circuit systems), a wireless controller (for 4 or 8 circuit systems), a QuickTouch® 4-function wireless remote, a Four-function spa-side remote, a 4-button spa side remote, and iS10 spa-side remote.

Built-in diagnostics include automatic verification of the display, microprocessor, switches, indicators, relay outputs, valve outputs, sensor inputs, and communication ports as well as a diagnostic screen that reports failures for troubleshooting and repair purposes.

Who says pool automation has to be costly and complicated? Scheduling and controlling the operation of pool and spa equipment and related poolscape accessories became blissfully automatic, simple and affordable after the launch of EasyTouch control systems in early 2000. They eliminated the inconvenience of repeated trips to the equipment pad, memorizing operating sequences, opening and closing valves and resetting time clocks and thermostats.

What’s more, EasyTouch systems set the standard for operating simplicity with push-button operation and clear, intuitive instructions and displays. Today, the EasyTouch family offers even more features, options and technology while remaining affordable for any inground pool owner. They also remain the simplest to program and operate…push-button simple.

Automatic water sanitization. Today, you also choose from systems that incorporate the revolutionary IntelliChlor chlorine generator. IntelliChlor uses plain salt to create pure chlorine for pool sanitization the convenient and automatic way. Electrolytic chlorine generation is the easiest, most effective and convenient way to keep pool water sparkling clean. Your EasyTouch system includes all circuitry and fully programmable controls in a single Load Center unit installed near your pool or spa equipment. For pool / spa combinations (dual body of water) with a shared set of equipment, you also receive two valve actuators for automatic switching between pool and spa operating modes. For added flexibility and convenience, indoor, spa-side and wireless remote control devices can be added to any EasyTouch system.

As you can see, with EasyTouch systems, pool, spa and poolscape accessory operation—including sanitization—becomes as simple as operating your automatic lawn sprinkling system.

All functions controlled with easy, one-button access from the self-contained load center or optional controllers. No need to memorize operating sequences, open and close valves, or reset time clocks and thermostats.

Built-in diagnostics include automatic verification of the display, microprocessor, switches, indicators, relay outputs, valve outputs, sensor inputs, and communication ports as well as diagnostic screen that reports failures for troubleshooting and repair purposes.