remove good lcd panel from macbook pro price

MacBook laptops from Apple are some of the most beautiful and well designed – not to mention powerful, but just like everything else man-made they aren’t impervious to accidental drops, dings, and damage.

Unlike most laptop computer repairs, the retina display on the MacBook is very unique, and as a result much more expensive to service. Lenovo, HP, Dell and all major OEM for PCs will utilize the same display across hundreds of models, and even that display is used across multiple years of laptops.

If you are unlucky enough to have a damaged screen, chances are pretty good you started to look into how much does it cost to replace a MacBook screen at the Apple Store – and the odds are pretty good you had a tough time hammering down concrete figures without bringing your computer into a store and having someone from the Genius Bar have a look. If you wanted to make an appointment with a Genius Bar, you can find that additional information here.

In this quick guide we hope to show you about how much you can expect to have to spend on MacBook repair going forward, the total “all in” cost for getting your screen replaced, and your computer back up and running.

There are times when your MacBook Pro might be in need of screen repair. This can be due to different reasons and no one is ever happy when things break – whether it be an unintentional accident or due to some sort of malfunction.

Any laptop has the potential to fail and your MacBook Pro is no exception. Some small repairs can be fixed up in a matter of minutes while other issues might take longer and cost quite a bit of money.

One MacBook Pro repair that may seem complicated but is actually pretty doable on your own, is a screen replacement. This type of repair may sound intimidating but once you know the correct steps to complete the job, it’s actually pretty doable.

If you’re lucky, you may never have to replace your MacBook Pro screen. Under normal circumstances, these screens are really quite durable and long-lasting and are meant to withstand a bit of wear and tear over the life of your computer.

First of all, Apple admitted that the 2016-2017 MacBook Pro models have the ‘Flexgate’ display problem and it was only two years later that the issue was revealed to the public. The display problem most likely won’t affect the use, but it doesn’t look good.

Screens can also become blemished and scratched from steady use. Damage to the screen resulting from this type of daily wear and tear will build up over time and eventually cause your screen to look cloudy or scratched in appearance both when you are using it and when you look at the screen while the computer is powered down or in sleep mode.

Whether you have a small crack in your screen, a couple of large ones that make it almost impossible to see, or the screen is just scratched and blemished from a few years of steady use, a replacement screen is an easy option to make your laptop seem new once again.

The Apple Care Program is an option when you purchase your MacBook Pro. This program costs some money upfront but comes in really useful in case of an accident to your screen or any other part of your computer.

If you did not purchase your MacBook from Apple there still might be warranty programs in place from the provider. Be sure to call the business or location where you purchased your MacBook to see if they can offer the fix under any sort of warranty or if they have suggestions. They might not, but it is always good to check in before undertaking the repair yourself.

In reality, it is not that complicated of a process and you should be able to accomplish the task on your own with the right instruction and a few common tools.

If you are uncomfortable with the idea of trying to fix your screen, take it to a professional, but if you want to try it yourself, follow the steps below.

You’ll want to get everything in order before diving into this project so be sure to set up an area to work that is free of any obstructions, get all of your tools and materials in order, and clean the area of anything and everything that might be a source of dust or dirt.

The materials you need for this repair are: your MacBook Pro, the replacement screen (you can buy from Amazon or iFixit), a hairdryer, a screen cleaning cloth, and a suction cup.

Once the new screen is correctly in place, remove the plastic covering protecting the screen. Give the edges another round of heat from the hairdryer. Use the cloth the again press around the edges firmly. Your new screen is now installed!

Replacing a screen on your MacBook Pro is a repair that can be done by yourself pretty easily but should be done by a professional if your computer is under warranty or if you are uncomfortable completing the repair yourself.

Eric currently uses a 15-inch MacBook Pro for both work and personal errands. He did all the research and testing to make sure all the fixes and optimization tips shared on the blog are relevant to Apple’s latest macOS updates as well as fact-checking.

Hi there! My name is Nathan and I have been working professionally on Mac Screen Repair, Website Design, and Data Recovery for over 15 years now. I am proud of the services I offer and look forward to helping you. Please don’t hesitate to contact me with any questions. I do offer all my services nationwide via my mail-in program. Not sure what you need? Get a free quote!

I offer MacBook Air screen replacement for every model of the modern MacBook Air from when it was introduced in 2010 to the present model. In order to complete the Macbook Air cracked screen repairs, a time-intensive process must be completed to remove the broken LCD panel and install a brand new LCD display panel. I am one of the few shops in the country that offers LCD-only MacBook Air screen repair with a 24-hour turnaround. After completing thousands of Mac screen repair projects, I can confidently say I am a MacBook Air screen repair expert!

As long as the edges around the screen aren’t dented and there are no bends to the display, an LCD panel replacement is all that is needed for a cracked screen repair.

Whether you need an older model Mac screen repair or a newer Macbook Pro Retina screen replacement, I can replace your damaged MacBook Pro screen with a new display to get you back up and running as soon as possible. If you have an older MacBook Pro with a DVD slot with a cracked screen, you may need just the glass replaced, just the LCD replaced, or both the glass and the LCD replaced. No matter which panel needs to be replaced, I offer MacBook Pro screen repair at affordable prices with a fast turnaround. Just fill out my quote form and let me know what you need and I will respond quickly with a quote.

As long as the edges around the screen aren’t dented and there are no bends to the display, an LCD panel replacement is all that is needed for a cracked screen repair.

There’s nothing but fast, friendly, professional service from a very talented tech and outstanding communicator. Nathan is an artist, he cares, he’s ethical. He’s good person. And that makes all the difference when you’re looking for somewhere to get your computer repaired.

Nathan is where it is at. While apple wanted my first child and left kidney to repair my MacBook Pro. Nathan came to the rescue with an unbeatable price.

His staff is also awesome, and combined they can fix anything. He swapped out the glued in battery in my Macbook Pro in a matter of minutes and found that I had a GPU issue that could be fixed under an Apple recall for free.

They’ve also got a really fantastic system in place that keeps the repairs in a database so all updates are kept in a service history. And unlike a lot of repair shops he actually updates you on the progress of the repair without any prompting. As always, a fantastic experience!

We all know how it feels when you bring a piece of equipment in for repair. You want to know what is wrong with it, how much it will cost to fix, and how you can keep the issue from happening again. And you want to know these things as soon as possible. I will keep you in the loop from the beginning of the repair to the end with my state-of-the-art repair system. You will receive regular email updates throughout the process including when I receive the computer, when I start working on the computer, when the computer repair has been complete, and when the computer is on its way back to you!

You can’t get work done without your computer nowadays. I understand that you need your computer back as fast as possible. My 24-hour Mac screen repair turnaround will get your computer back to you as quickly as possible. Once your computer is received, the repair process will be started and completed within 24 hours. Once the repair is complete I will send your invoice via email, and your computer will be packed and shipped back to you via 2-3 day air service.

Steve Jobs told how his father taught him to paint the back of the fence as well as the front, even though it would not be seen. I use the same approach here at Mac Screen Repair. I am not the kind of tech to leave screws out, mount the screens without adhesive, or scratch the computer on a dirty workbench. You can trust me to provide your Mac screen repair with the highest quality workmanship possible.

As a one-man shop, I am able to provide service that is way more personal than most other shops. I take care of everything including answering questions, repairs, and shipping. I know what is going on at every step of the process and I will treat you the way I want to be treated when I have a product of my own serviced. Mac screen repair is my specialty, I am happy to guide you through the process.

I"m just wondering, would it be cheaper to go a 3rd party to fix it? How much will it cost approximately? Will Apple be cheaper given the limited availability of the screen assembly? Can the LCD be replaced alone? The main answer I"m looking for is how much this is gonna cost me. I doubt they"re going to cover it under warranty, even though I have no idea what caused it.

Edit: For anyone thinking of helping, firstly thanks. Secondly, one of my friends had their screen replaced by apple, a late 2015 15 inch Pro model. This cost them £332, just as a guide for when deciding how much it will cost for my model. Thanks again.

The Intel model has the screen glued in! It will take a good heat gun suction cups and plastic picks to carefully pry the display off, often times the screen will fracture in the process so be careful you control the flying glass and razor sharp edges! Wear eye protection & proper gloves.

Just like the early 2020 Intel version of the MacBook Air Core i7 Apple offered TrueTone which requires new screens to be calibrated! So while a new screen will work you will loose brightness control & FaceTime camera functions. Even a new complete display assembly faces this issue as well. This is a special calibration program not available to the public only via Apples Global Services private network.

Now while not a solution today, Apple has made it clear they will be opening up a parts program for their gear. We don’t know when as well what will be covered time wise, or if access to the calibration tool will be offered.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

It used to be that if your screen cracked on your laptop, you"d just replace the LCD and be done with it. That unfortunately is no longer the case. With the introduction of the Unibody Macbook and Macbook pro models, Apple changed the design of the display assembly. Now, there is a glass panel assembly that is placed on top of the LCD panel. The good news is that it is possible to crack just the glass panel and save yourself some money. The bad news is that it is also possible to crack both the glass panel and the LCD.

If you take your Macbook to most repair companies with a cracked display, they"ll undoubtedly say you need to replace the entire display assembly and charge you some astronomical figure. It really isn"t an extremely difficult procedure to do yourself however, and so we"ve created the guide below to show you just how to do it.

To begin, use a heat gun to loosen the double sided adhesive strip that holds the glass in place. Use caution, and heat the glass in short segments as over heating can cause damage to your LCD.With the glass heated, place a strong suction cup on the glass and pull up and away from the glass.

If heated properly, you"ll be able to see a small gap between the glass and the and the rest of the display. Insert a thin piece of plastic such as a credit card or movie rental card into the opening. Work the piece of plastic in enough where it can be slid along the seem of the glass. This will break the adhesive strip holding the glass in place.Repeat this procedure along the entire edge of the glass assembly. When you meet resistance, heat the area and repeat.

Once you have used a hair dryer or heat gun to warm the adhesive strip, use a strong suction cup to begin to separate the glass from the display assembly.

Caution: When pulling up on the suction cup, you should have to exert some force. However, do not apply excessive force as this could crack your glass or LCD. When you meet resistance, heat the area and repeat. At a certain point the glass will easily come free from the rest of the display assembly. Set the glass to the side on a clean, dust free, surface.

Next, remove 4 philips head screws ( 2 on either side ) holding the LCD to the display frame. Then remove the 2 philips head screws at the bottom of the display.

To reassemble, place the LCD back in the frame, and insert the LVDS cable backwards through the opening in the bottom the display frame. Then pull the cable through the opening. You can use a plastic pry tool to assist you in routing the cable. Be very careful with this cable as it can be easily damaged.

Line the bottom of the LCD up with the bottom frame, and slide it into the groove in the bottom frame. Then make sure the 6 screw holes are properly aligned. Replace the 6 philip head screws.

Thanks GladB, I was able to get a good hold sans "crazy glue" ;-) As I mentioned....I am a professional so looking good is ALWAYS IMPORTANT! My claim to fame is....."if it looks right!!! it is right!!!" I live by this Motto! ;-) Thanks for your response though!ReplyUpvote

I was able to do replacement successfully. (I am a puter professional ;-)..) But I have had issues with the lens replacement glue sticking well...Has anyone had the same issue and do you have a correct and pro solution? Btw....I cleaned and replaced lens correctly and new lens glue typically does not stick with any "perminance". Please advise?0

Thanks for the tutorial! But if it is too difficult, you can always sell your mac for spares to companies like www.macbookcrackedscreen.co.uk and use the money towards the purchase of a brand new Macbook :)0

I do this all day long for school districts. An opening tool like a isesame (a small metal strip) works great. As your work around the screen use guitar picks to keep the LCD to readhering (sic) to the tape. If you don"t have a plastic tool for the cable, try a small wooden kitchen probe.

I have this very thin pry tool I use. It"s even thinner than a butter knife. Helps through the heating process, but do not use any major pressure. If you are not sure what you are doing, take it to a pro http://www.callnerds.com/portland/0

Thank you very much. The LVDS cable went out on my Pro, so when i purchase a replacement tomorrow and it gets here next week, I will be using your wonderful guide.0

I broke the glass cover of my MacBook, so I ordered a replacement from PowerBookMedic.com (poor service, by the way). I tried to lift the cover using a suction cup. The cover did not come loose at the bezel, but instead it shivered into a gazillion of small parts. Removing it from the bezel was a biiiig PITA. I also used a heat gun to soften the sticky tape that held the shards on the bezel. Not good for the display...

Consumers can locate a new replacement for the screen or LCD panel on their Apple MacBook Pro. It is also possible for you to swap the screen or panel themselves with the proper accessories. Keep in mind that different screens or LCD panels used by the MacBook Pro will depend upon the model; many affordable options are available on eBay.

MacBook Pro - These are the original MacBook Pros made from 2006 to 2012. They come in three sizes: 13-inch, 15-inch, and 17-inch measured diagonally from the top-left to bottom-right corners. The model name, MacBook Pro, is written on the bezel beneath the screen, and the power button is located on the upper right corner of the chassis. Depending on the type of damage, it is possible to repair these Macs by replacing only the glass panel or LCD. In some cases, both panels need to be replaced to display properly.

MacBook Pro with Retina Display - The 13-inch and 15-inch Apple MacBook Pro Retina models were introduced in 2012 and feature much greater resolution displays and more powerful hardware than their predecessors. Retina Macs can be identified by their thinner chassis, lack of the name on the screen bezel, and the placement of the power button on the keyboard instead of on the chassis. If the screen on the Retina model is damaged, the entire display assembly must be replaced.

If your Mac"s screen is not performing as intended, there are a few symptoms that indicate that critical damage has occurred. Many Apple computers feature a glass panel atop an LCD panel, both of which may undergo damage. When damage occurs requiring screen replacement, a simple search on eBay will help you find what you need. Some common repairable issues include:

Cracks - These are some of the most easily identifiable forms of display damage. Cracks, similar to those seen in a broken windshield, are the result of blunt force damage to the glass of the MacBook. They can occur after the laptop has been dropped or banged. Cracks are easily observable whether the machine is powered on or off.

Distorted image - Visual anomalies include lines, unusual coloration, and blotches of black or distorted colors on an otherwise clear image on the screen. These distortions may occur after the device has undergone physical damage and can only be seen when the Mac is powered on. If you have a distorted image and cracks, it is possible that both panels of your MacBook are damaged.

Black display - If your Apple MacBook"s screen is totally black, it can be more difficult to determine the cause. While damage to the display is a definite possibility, this can also be caused by other hardware issues, such as a power supply failure or problems with software.

Yesterday, Apple revealed it would expand its Self Service Repair program to let you fix your own MacBooks, and today the program is here. You can now download full repair manuals for your 2021 14-inch and 16-inch MacBook Pros and the 2020 13-inch M1 MacBook Pro and M1 MacBook Air — and shop for parts you might need.

Many prices seem (relatively) generous! Others, not so much. You can’t just replace your own battery or keyboard on a MacBook Pro, for example! You have to buy the entire top lid that comes with that and other parts preattached, and it’ll cost you more than twice the $199 that Apple charges for a battery replacement.

And while you can replace just the battery on your 2020 M1 MacBook Air, you’ll have to spend $39 — the same price as a full set of keycaps — to replace broken keys on your function row. That might be because Apple ships seven sets of Fn keycaps at a time:

The motherboard prices are particularly interesting. Not only will Apple not let you upgrade to a higher-end board, the company is dramatically incentivizing you to return the original part. It expects you to lay out as much as $4,222 for a new logic board — ouch at having that on my credit card — but you’ll get the vast majority of it back upon return. You should wind up paying $588 for a 16-inch MacBook Pro board, $500 for a 14-inch or 13-inch MBP board, or $368 for an M1 Air board, no matter how loaded it is.

Apple logic board prices, 2022CPU, GPU, RAM, Storage14-inch MBP (2021)16-inch MBP (2021)MBP (M1, 2020)MBA (M1, 2020)M1 Pro 8/14/16GB/512GB$878.24 ($378.40 credit)N/AN/AN/A

You can find a list of everything that comes with the MacBook tool rental at the bottom of this webpage. Interestingly, only the 2020 MacBook kits come with big, heavy special tools like display and battery presses.

It is not worth replacing a MacBooks screen as a modern Macbooks with a retina display screen cost between $455-$755 to replace. $755 is almost the price of the $999 2021 Pro with the money instead as MacBooks only have a 5-8 year lifespan.

In regards to, how much does replacing a Mac screen cost? If you have a MacBook with a Retina display screen (pretty standard equipment these days, but not with the older MacBooks) you can expect to spend between $455 and $755 replacing the screen completely at the Apple Store. Tier 4 Accidental Damage is $655, then an additional $100 Labor Charge for a total of $755.

Additionally, how much does it cost to change the display of MacBook Pro? ‍Cost : MacBook screen cost varies from 10300 INR to 63500 INR depending on the MacBook model and screen size.

Also, can a cracked MacBook screen be fixed? MacBook broken screens can be repaired easily by a qualified Apple technician at a fraction of the cost of replacing one. An authorised trusted MacBook repair service centre like Service Plus is best placed to offer quality repairs using quality parts and accessories to ensure the integrity of your Apple device.

Considering this, does Apple replace MacBook screens for free? There’s no charge if the issue is covered under warranty, AppleCare+, or consumer law. If your issue isn’t covered, the price depends on the type of repair.

Replacing the screen itself is a pretty simple and quick procedure. However, after installing the new screen, some diagnostic tests should be performed before the new screen is fully functional. This could take anywhere from three to five hours, no matter where you take your MacBook.

Every Mac and Apple display comes with a one-year limited warranty and up to 90 days of complimentary telephone technical support. Purchasing an AppleCare Protection Plan will extend both the warranty and technical support coverage to three years from the day you purchase your Mac.

For a 13” MacBook Pro, the cost is $269. If your screen or external closure is damaged, you’ll have to pay a $99 service fee. Any other damage costs you $299. Your out-of-pocket costs to repair a broken screen for a MacBook Air under AppleCare+ would be a total of $348.

Unless the damage is minor, a cracked screen will likely result in a dead screen, rendering your device unusable. As such, you’ll want to get it repaired quickly. Your best bet is to go to an Apple Store or Apple Authorized Repair Center for a MacBook screen replacement or device replacement.

AppleCare+ for Mac extends your coverage from your AppleCare+ purchase date and adds up to two incidents of accidental damage protection every 12 months, each subject to a service fee of $99 for screen damage or external enclosure damage, or $299 for other accidental damage, plus applicable tax.

If your iPhone issue is covered by the Apple warranty, AppleCare+, or consumer law, there’s no charge. This does not include accidental damage, which requires a fee. If your iPhone was damaged and you have AppleCare+, the coverage includes accidental damage protection.

The Apple Limited Warranty covers your iPhone and Apple-branded accessories against manufacturing defects for one year from the date you bought your product. The Apple Limited Warranty is in addition to rights provided by consumer law. Our warranty doesn’t cover damage caused by accidents or unauthorized modifications.

For most products, Apple’s extended warranty plan is known as AppleCare+, which provides up to two or three years (depending on the product) of hardware coverage, as well as coverage for up to two incidents of accidental damage every 12 months (subject to service fees).

Our Mac repair and upgrade services go far beyond what you would expect. We fix MacBook screens, replace batteries, repair water-damaged Macs, and even refurbish logic boards! We also offer a full range of software services including malware removal, tune-ups, and data transfers.

Not sure what’s wrong with your iMac or MacBook? No worries. We offer free diagnosis on all Macs. Just bring your computer to us and we’ll take it from there. You can expect to hear back from us in a day or two (although some diagnoses may take longer) with a repair quote and estimated repair time. If you require a diagnosis right away, give us a call to schedule our same-day diagnosis service.

Our 90-day warranty provides peace of mind for our customers who use us to repair their Macs. It ensures that our service will work as advertised and that we will stand behind our work if there are any problems.

We are proud to help Philadelphia professionals work at the highest level by upgrading or repairing their Mac or MacBook they can’t do their job without. Our customers include DJs, photographers, graphic designers, software engineers, and of course business owners of all kinds from all over Manayunk and the entire Philadelphia region.

We offer component-level screen repairs as well as component-level logic board repairs! We are able to replace just the broken component rather than replace the entire assembly. This allows us to offer repairs at a lower price than most competitors. It also allows us to keep stock of the parts we need to complete the repair faster than if we needed to order entire assemblies for the repair process.

We specialize in repairing Apple MacBooks. Whether you have a MacBook, MacBook Air, or MacBook Pro we are your one-stop shop for repairs, upgrades, and peripherals.

If your MacBook needs screen repair, we can help! We are MacBook screen repair experts and can help you get your device repaired quickly. We are one of the few shops to offer component-level Mac screen repair services (including flexgate repair), saving you time and money on your repair needs. Our Mac screen replacement service is available for the older 2008 models, all the way up to the brand new Macs.

*Due to COVID 19 Macbook Screen Repair Rates are constantly changing due to supply constraints and shipping costs. Please contact us with your Mac’s serial number for exact pricing.

$349 2018-2020 LCD Replacement (for cracked screens without dents or liquid damage). By replacing just the LCD panel we are able to save you $100s off the price of a replacement Macbook Air Display assembly. This service is available for model numbers A1932 and A2179.

$349 M1 2020 LCD Replacement (for cracked screens without dents or liquid damage). By replacing just the LCD panel we are able to save you $100s off the price of a replacement Macbook Air Display assembly. This service is available for model A2337.

$349 13″ MacBook Pro LCD Replacement (for cracked screens without dents or liquid damage). We offer component-level replacement on MacBook Pro screen repair. This means we only replace the broken LCD panel which saves you money. This service is currently available for model numbers A2159 and the M1 A2338.

$699+ 16″ MacBook Pro Model A2141 LCD Replacement (for cracked screens without dents or liquid damage). We replace just the cracked LCD panel during our service.

If you have a cracked display on your 13-inch Retina MacBook Pro, we can help fix it! Our MacBook Pro screen repair service is usually completed in about 24 hours with this model as long as we have the part in stock. Please contact us to check on stock availability.

These 15″ Retina MacBook Pro screens are getting more and more difficult to source, but we can usually get them in. Just be sure to contact us to check on stock availability if you have a cracked or broken Retina MacBook Pro screen that you need to be repaired.

There is an issue that affects primarily the 2016 and 2017 models of the MacBook Pro that causes issues with the screen. The issue has been dubbed “flexgate” as the cause of the problems is a flex cable that is just a few millimeters too short and slowly gets pulled off its connection.

We also offer screen repair services for vintage Mac laptops. If Apple has said they are not able to repair your computer because of its age, check with us! Chances are we will be able to replace the screen on your older MacBook.

We are one of the few shops that are able to offer component-level repair on these MacBook Air displays. We can replace just the LCD panel instead of having to replace the entire display assembly (as long as the display assembly isn’t dented or bent). If you do need an entire display assembly replacement, we offer that service as well! Feel free to contact us if you are unsure of what you need or if you have any questions.

These Non-Retina MacBook Pro models have a panel of glass covering the LCD panel. If you have just cracked glass on this model, the image on the display will be good, but it will appear as though your computer has a cracked windshield. We can replace just the cracked glass if that is all you need. We also offer services of replacing both the glass and the LCD if that is what is needed. Feel free to contact us if you are unsure of what you need or if you have any questions.

We only use certified batteries for our Macbook repairs ensuring there is no damage to your device. Inexpensive replacement batteries in most cases lack the protective hardware components designed to keep your Macbook safe from Voltage fluctuations. Always stick to original or certified replacement batteries when you repair any of your Apple products.

Does your MacBook Air need more battery life? Get a MacBook Air battery replacement fast with our certified batteries. We can generally complete the repair within 1 day of receiving your computer. We do special order these batteries, so please make sure to make an appointment before bringing your computer in.

If you have noticed your MacBook Pro doesn’t the battery life it once did, it might be time for a battery replacement. We offer fast MacBook Pro battery replacement, with a 24 hour turnaround. Contact us before bringing your computer in so we can have the part we need on order and ready when you arrive.

The older A1502 MacBook Pro requires complete disassembly to replace the battery. Even with this extra time involved, we are still able to offer fast battery replacement services with an average turnaround time of 2 days. Be sure to get an appointment for this service as we do special order these batteries.

The older A1398 MacBook Pro requires complete disassembly to replace the battery. Even with this extra time involved, we are still able to offer fast battery replacement services with an average turnaround time of 2 days. Be sure to get an appointment for this service as we do special order these batteries.

Even the older MacBook Air models generally last about 5 hours between charges! If your MacBook Air battery life is lower than you would like, make an appointment with us for our fast battery replacement service. Our average turnaround on this model is about 1 hour if you have an appointment. Without an appointment, it can take a few days to get the part in stock.

These older MacBook Pro models really require a lot of power when in use, so they generally only last a few hours when fully charged. If you are noticing an even bigger decrease in battery life than usual and you want to extend that usable time a little, a MacBook Pro battery replacement can be done at MackTechs! We offer battery replacement for most of the older model Macs, just contact us to verify we are still able to get the battery you need.

If your MacBook has a replaceable hard drive, we can replace a bad or slow drive with a new, faster hard drive. With files taking up more and more space these days, we can also swap out a small SSD with a larger SSD so you have more capacity available on your Mac. If you are not sure what you need and want to discuss your upgrade options, feel free to contact us with any questions.

Non-Retina MacBook/MacBook ProPriceMacBook Air 2013-2017, Retina MacBook ProPrice2008-2012 (250GB SSD Hard Drive)$200 +taxMacBook Air 2013-2017 (Market Pricing)$149-$299

If your Mac laptop has a keyboard that is not working properly, we can help! Keyboard replacement is most commonly required after some sort of water damage has occurred. The most classic symptoms of a failing keyboard on a MacBook are some of the keys not working or some keys causing multiple characters to show up when pressed.

Non-Retina MacBook Pro (2008-2012), MacBook Air (2012-2017)PriceRetina MacBook Pro 13″ & 15″ (2012-2015)PriceKeyboard & BacklightCall for pricingKeyboard & BacklightCall for pricing

MacBooks can have issues with their trackpads out of the blue, or after water damage. The most common symptoms of a failing trackpad are the pointer moving around when you are not touching the trackpad. Another common issue is the click functionality not working as expected. We offer trackpad replacements for the MacBook, Macbook Air, and MacBook Pro models.

Non-Retina MacBook Pro (2008-2012), MacBook Air (2012-2017)PriceRetina MacBook Pro 13″ & 15″ (2012-2015)PriceTrackpad ReplacementCall for pricingTrackpad ReplacementCall for pricing

We are one of the few shops to offer component-level logic board repair for MacBook laptops. The logic board is one of the most expensive components inside your MacBook, so if it stops working properly, the cost to replace the part can sometimes be close to the value of the computer. With our component-level logic board repair services, we replace just the components that are bad on the motherboard, saving you $100’s.

Our logic board repair services are available for MacBooks that have just stopped working or that have been liquid damaged. Liquid-damaged logic board repair is one of our most common board repair services. We have a no repair, no charge guarantee, so bring your computer in for our logic board repair service before paying a ton for a logic board replacement.

There are a lot of things that can fail during a liquid damage spill. We offer liquid damage repair for all model MacBooks. Here are a couple of examples where we were able to repair a liquid-damaged Macs.

We specialize in repairing Apple desktop computers. Whether you have an iMac, Mac mini, or Mac Pro, we are your one-stop shop for repairs, upgrades, and peripherals.

The 21″ iMac model is one of our favorites to upgrade with a solid state drive. The standard hard drive Apple used in this model is notoriously slow, so by upgrading to a fast and modern SSD, you will see a massive improvement in speed during general use.

If your iMac took some damage to the screen, we can help by replacing the display panel! Our fast service gets your iMac back up and running quickly so you can start work again right away.

iMacs tend to get a little dusty inside after a few years of use. We offer the service of opening your iMac up to thoroughly clean it. Removing the buildup of dust and debris from inside your iMac will help it run cooler and more efficiently. We also test the fans during the process to verify they are running as they should.

Thank you, it worked like a charm. It took me some 20 minutes in total, I’d say 10 minutes to remove the coating alone. There where two spots which were hydro repellent initially, but that was because of the coating. After some time they finally came off. The result is amazing, I almost forgot how bright the screen was. Thank you very much, spot on!

The last model you mention as susceptible to this issue is early 2017. Does that mean Apple has fixed the problem for computers newer than 2017; for example, a 2019 MacBook Pro?

Hi Deanne! It is not clear whether Apple has done any change to the anti-reflective coating of their Macbook lineup. While researching this topic, I noticed a couple of instances of people having this issue even on a never laptops (2018, 2019). If the problem arises in a greater measure again, Apple will likely just add the newer models to the repair program. Hope that helps, Jakub.

Thank you for this!! My screen was looking so bad. There were scratches and blotches everywhere from the coating wearing away. I think it must have taken me about 20 minutes as well. Mine was really bad so it took about 4 different wipe downs but my laptop looks brand new now!!! I am so beyond happy. Apple wouldn’t help me with it and wanted to charge me to replace the glass costing me an arm and a leg.. pfffff. Thank you so much OP!

Thank you so very much Jakub! As the title says, this is the best and easiest way to remove the anti-reflective coating from my MacBook Pro (Retina, 13-inch, Late 2013)!

Hi Erik, thank you for the tip, I’m glad you found a good alternative that works for you! If I can get my hands on the W5 Multi-purpose cleaning wipes I’ll give it a try, since my wife’s MacBook screen is getting pretty bad as well.

Hi. I’ve tried W5 cleaning wipes from LIDL as well and I was shocked how easy it is going down. Thanks for a tip. W5 works perfectly. 10min est. time. No issues, screen as new. THANK YOU ALL guys!

I have a Macbook air 2011 that accidentally got residue from a Method cleaner used to clean the rest of the machine. The screen looked terrible where the keys and trackpad smudge the AR coating. I used your baking soda method and was able to get about 90% of the coating removed, however, since then nothing I do seems to budge the remaining 10% which is very visible. I’ve tried, Lysol wipes, Isopropyl alcohol, glass cleaner, method cleanser (originally caused the problem), cook top cleaner, auto polish, glasses cleaner, screen cleaner, and Mr Clean Magic Eraser. I am super frustrated because the original suggestion of baking soda seemed like a good solution, but not able to do the complete job. Any ideas why some of it is so stubborn and anything else I can try??

Hi Andy! If you notice the Macbook Air 2011 is not on the list of reported devices with possible AR issues, which indicates Apple used different type of screen, and thus I would not recommand to use the method described in this article. As far as I know, older models such as Macbook Air didn’t have a glasss screen protecting the LCD panel which sits behind it, like the newer Macbook Pro’s have. Unfortunately in your case I’cant give you any further advice, since I’ve tested my method on device with a glass screen. The good news is that the older displays for devices such yours are much cheaper to purchase.

I just finished removing my anti reflective coating. I used hand wet wipes to remove the coating and after I used some floor anti bacterial solution and let it soften the residue that remained after removing the coating. Polished with micro fiber cloth and it is shinny. Looks good.

The bad stuff. Viewing angle is poor from side to side. The display has a green-ish tint for darker colours and the colours seem a bit faded (i was kind of expecting this). However, I recommend changing the colour profile from the default Colour LCD to Generic RGB Profile. Why? Because it darkens the image a bit and adds a touch of colour, feels more like it used to be.

Hi Roajah, thanks for the comment. I’m glad you find your way to deal with this issue. Personally, I haven’t noticed any change to the colors of the display after removing the AR coating using the baking soda method. The only downside is the higher reflectivity. Anyways thanks for the tip about changing the color profile of the display, maybe someone will have a similar issue as you had.

*EDIT: This is a great technique for removing the AR coating, BUT it has altered the colour profile of my screen. the dark tones now have a green hue to them, which isn’t ideal if you’re in any form of visual arts job. Luckily, this laptop is only my secondary back-up computer which I use for emergencies and data mining, so it doesn’t really bother me. But be warned that this can happen

Hi Jon, could you tell us what model of Macbook Pro you have? And what method of removing the anti-reflective coating did you use so that others know what to avoid? Thanks! Jakub

If you want to make sure that it works, use a just a little of the baking soda solution on the edge of your display, in case it works than proceed with the rest of the display. Hope this helps! Jakub.

Hi Lech, thank you for the kind words! I’m glad I could help! Well, I’m still rocking my good old MBP 13″ 2013 (the one you can see in the pictures above), which is becoming painfully slow, for my video, photo, and music production. The Macbook Air with the M1 certainly seems like a device with an excellent price-performance ratio. When I have saved up enough for it, I’ll certainly buy one! Have a great life too!

Hi, Jessica! Thanks for the feedback! Yes, that makes sense since, from what I know, baking powder does contain baking soda as well, so it should be a viable option.

Thank you very much! worked perfectly on my MacBook Pro (15-inch, Mid 2015). Although I ignored his advice about “don’t perform the procedure if it’s just for aesthetic reasons”. My slight TOC reached very high limits looking every day at my stained screen.

I remember the first anti-glare “coatings”. They were just a fine nylon mesh stretched over the front of the CRT. They cut down on the glare but also made the screen duller and harder to read. Most of use chose the brighter/sharper image without the mesh. We had to angle the screens away from bright lights, but it was a small price to pay.

I’ve often wondered what a MacBook would look like without the anti-glare coating. I know the new coatings are a vast improvement over the original meshes, but do they still make things duller and fuzzier? I’m still not sure, but I can say that the screen looks stunning without its coating. Might or might not be better than new, but a vast improvement over the damaged coating.

Thank you for posting these instructions. They worked exactly as described and in just a few minutes my screen went from spotty to spectacular. I might keep the beast a bit longer now that I like it again