remove lcd screen from laptop supplier

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Whether it"s cracked or has one too many blown pixels, a broken laptop display can stop you dead in your tracks. But with the right tools, a little technical know-how, and a bit of patience you can replace a damaged LCD.

I also suggest you watch my earlier video on what to know before trying to fix a smartphone or tablet. It"s not specifically about laptops, but the information is still relevant, and it will help you decide if you should repair the machine yourself or take it to a shop.

To begin your fix, you"ll need a few simple tools and a replacement LCD screen. For tools, I recommend a screwdriver set with a variety of small bits, such as a Phillips #00 and a Torx T5. It"s also a good idea to have a few thin metal blades or plastic spudgers. These are really handy for removing the trim that surrounds the screen.

As for the replacement LCD, you should be able to buy one either from the laptop manufacturer"s authorized parts dealer or a third-party supplier. Depending on the screen, they usually cost between $50 and $250 dollars -- more if it"s a high-end display or if you buy an OEM replacement. Regardless, you"ll want to buy a new screen that matches your broken one exactly. The only sure way to do this is to remove the broken one.

After disconnecting the power supply and removing the battery, carefully examine the bezel around the screen. You"ll need to remove this bezel to access the screws that hold the LCD panel in place.

On this laptop, several rubber cushions hide screws, which hold the bezel in place. I"ll need to remove these cushions and the screws that are underneath.

With the hidden screws removed, I use a thin metal blade to pop loose one of the bottom corners, and work my way around the bezel with a plastic spudger.

Note: Your laptop may not have cushions or hidden screws. The bezel may simply snap onto the lid or be held in place with double-sided tape. Just adapt my instructions to fit your specific laptop.

With the LCD"s mounting brackets exposed, you can remove the screws that secure it to the lid. Then rest the display front-side-down on the case and disconnect its cable.

If your laptop was made before 2010 and has a LCD with fluorescent backlights, it will likely have two cables. But as this is an LED-backlit LCD, it only has one.

Now, locate the manufacturer"s label and note the model number. Using this information you should be able to buy an exact match for your broken screen.

If the dimensions, mounting brackets, and connector all match, you"re ready to install the screen. Connect the new panel to the cable, position the panel in the lid, and secure it using the appropriate screws.

A dying or cracked display doesn’t mean your laptop is a paperweight. For most laptops, a screen replacement takes $80 and an hour of your time at most. If you’re a DIYer, replacing a broken laptop screen yourself is a great way to save cash, as most computer repair shops will quote you $150 to $300 for the job.

Before doing anything, give your laptop a full look-over and inspection to ensure the screen really needs replacement. If the graphics card on the motherboard is dead, for instance, you may be wasting your time and effort on replacing a perfectly good screen. Additionally, if the laptop has been recently dropped or otherwise possibly physically harmed, you’ll want to double-check for other damage as well.

To ensure the graphics card is functioning, you can plug a desktop monitor or TV into the laptop, as most have a standard blue VGA monitor and/or a HDMI output. If the picture looks good on an external display, your graphics card is likely good and the screen is at fault. If you don’t get any picture, keep in mind some laptops require you to press certain function keys on the laptop to activate external display output. If you do that and video still doesn’t display, your graphics card and/or motherboard is likely broken, rather than your screen.

If the laptop outputs to another display successfully, use the computer for a while to ensure the keyboard and other laptop components appear to be functioning normally.

Before you replace your laptop’s LCD, here are the caveats to the general steps that follow. This is not meant to be a guide for ultrabooks, two-in-ones, tablets, Macbooks, or other, more specialized notebooks, however. It’s more for average, run-of-the-mill laptops. But even then the general steps I discuss do not work for all such laptops. Some will require a different process and/or more work to replace the screen, such as accessing the motherboard by opening the main case of the laptop.

Because of that crucial caveat, before buying a new LCD, it may be a good idea to try to remove the damaged screen first, to ensure you can perform the replacement. If, after following the first few steps the process looks different for your laptop, I recommend scouring Google and YouTube or finding a repair professional for further help on your exact laptop brand and model.

Finding a replacement LCD is typically easy—and you don’t have to pay the crazy prices the manufacturer usually wants. Just search eBay, Amazon, or Google with your laptop model number and the words LCD screen. You’ll find most regular screens can be had for as low as $50 to $80. If you aren’t finding anything, try other identification numbers from the laptop label or documentation. Some vendors have one or two different sets of identification numbers that could serve as your model number.

When shopping for the LCD, most sellers will alert you to compare the specs and placement of the video cable on the back of their screen to your current screen. This is another reason to crack open the laptop bezel before ordering a replacement. However from my own experience, if the seller says the screen is compatible with your exact laptop model, it usually works.

Table or other flat working area: You’ll need a spot to sit (or stand, if that’s your thing) with a flat area to work on your laptop. This gives you a reason to clean off that messy dining-room table or desk.

Small-head magnetic philips screwdriver: Not small like a mini screwdriver from an eyeglass repair kit, but I’d say between that size and a mid-sized screwdriver would work. If you don’t have a magnetic-head screwdriver, try to find a magnet big enough to magnetize the driver head. This helps the screws stick to the head, making it much easier to remove and replace the screws without cursing as they fall all over the place.

Plastic putty knife or other thin object: This is optional, to aid in prying apart the screen bezel from the case. Personally, my finger nails usually do the trick. If you do use another object, ensure it’s thin enough but not so sharp that it will leave scrapes or other evidence of prying.

Find the round cover stickers that are hiding the screws on the screen bezel, the case surrounding the screen. These stickers are usually on the bottom of the bezel, near the screen hinges, when you have the screen opened. You should find one on each side of the screen.

Use a sharp, pointy object—like an opened safety pin or needle—to help remove the cover stickers without damaging them. Stick it between the edge of the cover and bezel, and then pry the sticker away. Once removed, place the covers in a safe spot, with the sticky side up to help ensure there’s enough stickiness when you place them back on.

Use your screwdriver to remove the now-exposed screws. Remember: righty-tighty, lefty-loosey. Some screws are easy to remove; others, not so much. But moving the screen into just the right position usually exposes the screws enough for removal.

Carefully start prying the screen bezel away from the back side of the screen case. Work a fingernail or other thin, prying object into the crack around the outside of the screen. The bezel is usually secured to the back case with plastic snaps, so give it some force while prying—but not too brutish. You’ll hear the unsnapping of the fasteners when prying.

Once you’ve unsnapped the screen bezel, it may or may not be easy to remove. If not, it’s likely stuck around the screen hinges. Moving the screen position up or down, with some gentle force if necessary, should free it fully.

Once the bezel is fully removed, you’ll find the LCD secured to a metal trim frame on the left and right sides. Remove the two screws (one on each side, on the top) holding the trim frame pieces to the back screen case. Now, you should be able to lift the LCD (with the trim frame pieces attached) slightly away from the back screen case.

On each of the trim frames’ sides, remove any screws that are securing it to the LCD. Most laptops have three screws on each side; however, the smaller laptop I photographed here doesn’t have these screws—the LCD is actually secured to the trim frame pieces by tape on each side.

Now you should be able to set the LCD face-down onto the keyboard. Be careful not to put excessive force on the video cable attached to the back of the LCD.

Disconnect the video cable from the back of the LCD. Though the laptop I photographed here has the connector on the very bottom, most laptops have the connector near the center. If so, keep in mind that the portion of the cable running down the screen is usually stuck on the back of the screen with some mild adhesive. Just gently pull the cables away from the screen. You usually must remove tape that’s securing the video connector to the back of the screen as well. When you get to the point of actually pulling the video cable out of the screen connector, it should unplug with little force.

Once you’ve fully removed the broken LCD, simply place the new one face-down like you did the old one. Reattach the video cable to the connector and place the cables and any tape just like they were for the old one.

Set the new screen up in the side trim frame pieces, then re-secure it like the old one was: usually three screws in each side of the trim frame pieces, and then a screw on top of each to secure it to the back screen case.

When you get to the point of putting the bezel back on, just line it up and push/squeeze the bezel back into the snaps of the rear screen case. Before replacing the bezel screws, ensure the bezel is fully snapped in place and no crack exists around the edges of the screen case. Lastly, use that safely pin or needle to reattach the sticky screw covers.

We are experts in providing replacements for damaged laptop, tablet, portable and industrial LCD screens. We provide best quality, brand new A+++ replacement LCD for all major Laptop Brands.

If your Laptop LCD screen is broken, damaged or cracked during use or has dead pixels / lines or the picture sharpness is reduced and backlight is not working, don’t panic. We can provide you excellent quality replacement LCD screen at very reasonable prices.

We take pride in our quality and price. You need not buy a new laptop if your LCD screen is damaged as you can easily replace it yourself with these simple DIY steps.

To ensure that you purchase the right screen for your needs we are happy to assist you in identifying exactly the right he correct screen for your Notebook LCD Screen, tablet, portable computer, etc. You can contact us anytime between 10AM EST to 8PM EST on Monday thru Friday either through the chat function at the bottom right of the screen, or by calling us at (201) 442-0091.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This article was co-authored by Matt Ham and by wikiHow staff writer, Nicole Levine, MFA. Matt Ham is a Computer Repair Specialist and the CEO and President of Computer Repair Doctor. With over a decade of experience, Matt specializes in Mac, PC, iPhone, iPad, and Smartphone repairs and upgrades. Matt holds a BS in Mechanical Engineering from North Carolina State University and an MS in Mechanical Engineering from Columbia University. Matt has expanded Computer Repair Doctor to seven different locations. He is also a Co-Owner of Repair Life, a full-scale marketing agency specializing in driving both online and offline leads to cell phone and computer repair shops and device retailers.

Having a broken laptop screen can halt many tasks as laptops have now become a key part of our day-to-day life. On a broken laptop screen, you see different visual defects. That could be lines, colored pixels, or black patches. In many cases, you may even not see the screen turning on.

Laptop screens can be damaged due to various reasons; you might have dropped them somewhere; the laptop might have hit some hard surface or even a small sand particle in the screen can cause the damage.

Now, the question is how much does it cost to fix a broken laptop screen? Well, according to the nature of the damage, it differs. In this article, we are going to cover the estimated cost of fixing a laptop screen and see whether a laptop screen can be fixed at home or not.

First, find out if your laptop is under warranty or not. If it is, then go for it as it would not cost you anything if the screen damage fell under the terms and conditions of the warranty.

The repair cost also depends upon the manufacturer of the laptop. A standard laptop (Windows) can cost around $150-$200 whereas an Apple laptop would cost slightly higher due to the complexity of the repair.

If the distortions on the screen are due to software or Windows bugs, then they can be fixed by using some quick tricks. Or if the connecting cable of the screen and motherboard has loosened then it can also be adjusted. It would hardly cost you anything except some tools and a bit of expertise.

This question has a complicated answer. On average if the laptop is repaired by a qualified technician, then it could cost around $300. Or if you are fixing it by yourself then you may need to buy a replacement screen online and that could cost $50-$100.

If you don’t have proper tools, then they would also cost $25-$80. Ensure that you have the required skills before opting for the later solution as if one step went wrong then it would break the laptop as well.

Laptops come with different screen sizes therefore each laptop has different screen specifications that include the type of screen (LCD/LED), size, and resolution. The cost also depends upon the manufacturer, a reputable manufacturer costs more than a normal manufacturer.

The cost of the laptop display varies depending upon the type: the cost of an LCD is less than LED. The estimated cost of an LCD screen is $50-$100, while the LED would cost around $200.

Windows laptops vary in size, there are a variety of laptops available in the market, so listing all the laptop screen size costs would be difficult. The Windows-based laptop screen size generally ranges from 11.6”-17”. The price of the screens would go from $40-$150.

Apple laptop screens cost more than normal Windows-based laptops. MacBooks don’t have huge size variations as they come only in 13, 15, and now 16 inches screen sizes. The screen costs of MacBooks are mentioned in the table below:

The laptop screen fixing price is also manufacturer dependent. Now, we will list some of the widely used laptop brands and their screen replacing and fixing costs:

Dell is one of the widely acknowledged Windows-based laptop brands that not only manufactures laptops for normal usage but also for gaming. The estimated cost of fixing a Dell laptop screen is $45-$80. The cost could go up to $150-$200 for higher-end models.

Lenovo ThinkPad is another popular laptop series. The price to repair or replace the screen on a Lenovo laptop is $60, while other models can cost as much as $350.

Toshiba is another manufacturer that makes laptops, though Toshiba is not as widely popular as other brands still, the repair cost of the Toshiba laptop screen is $60-$240.

Samsung is another well-reputed and reliable laptop manufacturer. Samsung is also famous for making top-notch LED displays. Most Samsung devices contain LED displays including laptops so, the cost would be a little bit higher. The repair cost of a Samsung laptop is $140-$200. Older models of Samsung laptops including Chromebook screens can cost $60-$80.

MacBooks are famous for their quality. Apple pays special attention to its laptop displays. MacBooks come with high-resolution displays also known as Retina Displays. The MacBook’s screen cost $250-$500, and including the repair cost makes it even more expensive.

Apple provides AppleCare service to fix the broken laptop and other technical issues. AppleCare charges $100 for the labor. So, approximately you need to spend a minimum of $450 (including display cost, labor and tax) to fix the MacBook’s screen.

Find a qualified technician to repair the laptops. Best Buy, Dell Expert Repair Services, and Computer Expert USA are known for their repair services.

If the laptop model is the latest, then going for the new model just because your screen is broken does not make sense. If the laptop model is old and it is hard to find the parts of it then opting for the new laptop is the best choice.

Well, nowadays many manufacturers are making touchscreen laptops. Touchscreens cost more than normal laptop screens. The average cost of a laptop touchscreen is $80-$150. The estimated cost to fix a touchscreen is $250-$350.

Replacing or even fixing a laptop screen is not an easy job. You need the required tools and proficiency to open the laptop and untie the connection and then put it back. It is recommended to go for a reliable repairer to fix the screen of the laptop as it is a complex process.

Well, in many cases the laptop is not physically damaged, but some software issue is causing the problem. In that situation removing the specific software or simply restarting the laptop can fix the problem. With time the laptop screen connecting cable also gets loose. Adjusting the cable can also fix the laptop screen issue.

The display is the most essential part of the laptop. The laptop becomes almost useless if the screen gets broken. As the screen is the sensitive part of the machine the chances of getting it broken are also high. But if for some reason your laptop screen gets broken then try to visit a certified repairer to replace the screen. Replacing the broken laptop screen needs expertise and care, so it is recommended to go for official repair service providers or some reliable third-party laptop technician.

Replace any type of laptop, notebook or tablet display, with our range of high quality brand new replacement laptop screens - or tablet touch screens and get a 2 year warranty, and VERY fast delivery, from Europe"s largest and most professional screen replacement store.

Most laptop screens are replaced within 30 minutes, by users that have no previous experience, who simply follow the readily available YouTube screen replacement tutorials.

If you"re looking for a replacement display, whether for personal replacement of a broken laptop screen or cracked tablet screen, or because you are a professional or reseller, you"ve come to the right place. We know you need a quality replacement part quickly that"s why we offer a 2 year warranty as standard on all our products and extremely fast delivery. We"re your one stop display shop because we stock a huge replacement laptop, tablet and netbook screen inventory of 1,304,436 lcd models and we offer discount schemes to regular buyers - and we have the best customer service in the business, end of. Don"t take our word for it, see what people are saying about us.

We not only stock the popular brands like Acer, Apple, Asus, DELL, Hewlett Packard, Sony (discontinued) and Toshiba but we also stock a massive inventory of LCD part numbers for screens by LG Philips, Samsung, AU Optronics, Hannstar and many other well know and hard to find LCD brands.

Whether it’s cracked or has one too many blown pixels, a broken laptop display can stop you dead in your tracks. But with the right tools, a little technical know-how, and a bit of patience you can replace a damaged LCD.

Note: In this article and video, I show you how to replace the screen on an Asus UL50V notebook, which has an LED-backlit LCD. Depending on the make and model of your laptop, the internal hardware and specific steps may vary. The general process however, should be the same.

I also suggest you watch my earlier video on what to know before trying to fix a smartphone or tablet. It’s not specifically about laptops, but the information is still relevant, and it will help you decided if you should repair the machine yourself or take it to a shop.

To begin your fix, you’ll need a few simple tools and a replacement LCD screen. For tools, I recommend a screwdriver with a variety of small bits, such as a Phillips #00 and a Torx T5. It’s also a good idea to have a few thin metal blades or plastic spudgers. These are really handy for removing the trim that surrounds the screen.

As for the replacement LCD, you should be able to buy one either from the laptop manufacturer’s authorized parts dealer or a third-party supplier. Depending the screen, they usually cost between $50 and $250 dollars–more if it’s a high-end display or you buy an OEM replacement. Regardless, you’ll want to buy a new screen that matches your broken one exactly. The only sure way to do this is to remove the broken one.

After disconnecting the power supply and removing the battery, carefully examine the bezel around the screen. You’ll need to remove this bezel to access the screws that hold the LCD panel in place.

On this laptop, several rubber cushions hide screws, which hold the bezel in place. I’ll need to remove these cushions and the screws that are underneath.

With the hidden screws removed, I used a thin metal blade to pop loose one of the bottom corners and worked my way around the bezel with a plastic spudger.

Note:Your laptop may not have cushions or hidden screws. The bezel may simply snap onto the lid or be held in place with double-side tape. Just, adapt my instructions to fit your specific laptop.

With the LCD’s mounting brackets exposed, you can remove the screws that secure it to the lid. Then rest the display front-side-down on the case and disconnect its cable.

If your laptop was made before 2010 and has a LCD with fluorescent backlights, it will likely have two cables. But as this is an LED-backlit LCD, it only has one.

Now, locate the manufacturer’s label and note the model number. Using this information you should be able to buy an exact match for your broken screen.

If the dimensions, mounting brackets, and connector all match, you ready to install the screen. Connect the new panel to the cable, position the panel in the lid, and secure it using the appropriate screws.

One of the most common problems with laptops is damage to the screen. Unlike desktops, we all carry our laptops from place-to-place, so it’s no wonder that screen damage happens so often.

Before trying to replace your laptop screen, we have to first make sure that your screen actually needs repair. You may have dropped your laptop, and after seeing that it isn’t displaying an image, simply assumed that the screen must have broken. The screen might even be cracked a little, and yet that still might not be the reason you can’t get an image.

If your laptop has aVGA output, we connect it to a desktop monitor or television to see if it shows the image correctly. If it still doesn’t show, it means that your graphics card or motherboard is probably damaged. If this is the case, we would suggest replacing these components. Only when we can see an image on an external monitor butnotyour laptop screen do we replace the screen.

Another problem we may discover is that we may see a dull image on your laptop screen, or the backlight may flicker on and off. If this is the case, it is probably caused by a faultyinverter. If so, we contact you to suggest replacing the inverter and see if that fixes the problem.

If we don’t see any image at all on your laptop screen, but the laptop displays fine on an external monitor, we know it’s time to replace the laptop screen.

Once we’ve decided that the laptop screen needs replacing, and you’ve given us the go-ahead to start working on it, the first thing we do is remove the power brick and battery. Next, we look for rubber tabs on the frame around the screen.

After finding these, we use a flat-head screwdriver to gently pry open these covers one-by-one. These reveal several screws holding the “bezel” or screen-frame together.

In most cases, we can unscrew these bezel screws using a small, phillips-head screwdriver. However, there are some laptops frames that are held together by allen screws, in which case we use an allen screwdriver instead. We have tools to remove every type of screw, so we’re ready for whatever weird puzzle the laptop designer throws at us.

Once we’ve got the screws out, we pull apart the bezel and the LCD screen. In most laptops, the frame is secured to the screen with plastic snaps, so we know it has finally come out when we hear the “pop” of these snaps releasing.

Once the bezel is removed, we see the LCD screen inside of another metal frame. This metal frame is resting against or attached to the back case of the laptop. We remove the metal frame from the case either by unscrewing more screws or by simply pulling them apart.

Once we can get the LCD screen and metal frame away from the back case, we unscrew the rest of the screws that hold the metal frame to the screen. The LCD then comes loose, but is still attached to the video cable.

Usually, we can order a replacement LCD screen using just the model number from your laptop. In some cases, we may need to know the part number of the LCD screen itself.

If so, we look at the back of the LCD screen once we remove it from the laptop. The part number is a string of letters and numbers, such as LP254WE2 or LTN156AT 19-001. This is the information we need to find the right replacement screen.

Some prefer to always replace their screen with the official LCD offered by the manufacturer. Others prefer to save money by using a replacement LCD provided by an independent manufacturer. Ultimately, it’s up to you which one you want us to install.

To replace the screen, we first remove the tape holding the ribbon video cable to the screen. Then gently unplug the cable. There’s another cable running from a small circuit board, called the inverter. This cord is the power source for the LCD. We remove this cord as well.

Following these steps to replace a laptop LCD screen can be very time-consuming to do on your own. But luckily, you don’t have to do it yourself. You can mail your laptop to us, or you can drop it off at one of our many locations in California or Oregon. Just call us at 1-800-919-6373 or fill out ourcontact formto discuss your laptop screen problem.

We hope you’ve enjoyed this guide to how laptop LCD screens are repaired. If you’d like more info about how laptop repairs are made at Nerds On Call, check out ourlaptop repair service page.

My favorite, the most promising Apple Laptop LCD screen MacBook 13.3-inch . Coupled with our Apple MacBook WXGA glossy screen or monitor is packed with good performance and the latest technology. Put

A very faint or dim image can be seen on the screen, with the brightness controls turned up, but the image is not bright enough to be usable. This issue is very common with CCFL (Cold Cathode Fluorescent Lamp) type screens. The majority of the time that this occurs with a CCFL, the LCD screen inverter is to blame. The inverter powers the backlight in the screen and if it malfunctions, the screen will stay dim. In the remainder of the cases, the florescent bulb may fail to light up causing the screen to stay dim even with a good working LCD inverter.

Replacing the LCD inverter is the most inexpensive place to start, but because there are many different LCD screens and LCD inverters, finding an LCD inverter that is compatible with your screen can prove to be difficult.  Also, if the LCD screen turns out to be the problem, then you could waste time and money on the LCD inverter. To avoid this problem, I suggest buying a LCD screen with the compatible LCD inverter included.

Parts-People began as a small company 20 years ago in an extra bedroom of my house. I had saved a small sum of money to purchase some computer parts and began selling them on eBay. After a few months I realized that people needed a place to go for Dell parts so I began building our website. Since we are located in Austin, Texas, where Dell.com was founded, I was able to set up a solid supply line with Dell. From the start, we focused on customer satisfaction and selling quality parts. We have grown a lot since 2002 but still and always the customer will come first. You will find that we go above and beyond with every order and offer free resources and support before and after the sale.

One reason why a laptop is handy is the ability to carry it with you wherever you go. This means you have easy access to your photos, videos, documents and the internet even while on the move. As such, it can be very frustrating when a major component like the screen breaks, and your laptop is no longer functional until you fix the problem, which can be very expensive.

A broken screen is a major problem for any laptop owner due to disruption of use and cost. The problem may not be very serious, requiring only a quick fix, but it might also mean you need a new screen. This is particularly the case with LCD screens, since the liquid inside it spreads, blocking any graphics or text you should be seeing.

When your screen is broken, you need to check that the other laptop parts are working normally. You can easily do this by connecting it to an external monitor or television. If it works normally, then you can focus on replacing the screen. If your manufacturer’s warranty is still valid, you should definitely use it for the replacement, since you will get the most suitable screen and at no cost.

If your warranty already expired, you still have a few options. First, you could contact the manufacturer and find out how much the repair or replacement will cost. In most cases, this can be very expensive – it might even be cheaper to buy a new laptop. You cansearch online for a screen that would fit your laptop model.

The process and complexity of replacing a laptop screen depends on the manufacturer and the particular model. It may be held in place by a bezel or you may need to remove the keyboard to get to the screws for the screen. If you have never replaced a laptop screen before, it might be best to leave it to a professional to avoid the risk of damaging it.

Once the screen is replaced, the final step is to confirm that it’s working as it should. Replace the battery or plug it into a power source then press the power button. It should work normally, and you can resume your normal laptop use with no problem.

How much would it cost to fix a laptop screen? How much to fix laptop screen depends on the brand and model. Prices for screen breaks depend to vary. Check with your local computer repair shop for an estimate. They will ask that you give them the exact brand and model over the phone, then they can provide an estimate.

Data Loss - The requested repair and / or installation service may cause partial or complete data loss from my equipment. I must maintain backups and assume all responsibility from restoring any lost software or data. Micro Center assumes no responsibility from any software program, data loss or restoration.

Online Fee Collection – For certain diagnostic and repair services, Customer may tender a fee to Micro Center through an online payment transaction at the time of the online scheduling of a service appointment. Customer understands that the fee charged in an online payment transaction is merely an estimate based on Customer’s self-assessment of the necessary diagnostic and / or repair services for his or her computer. There may be circumstances where a Customer’s computer cannot be repaired, must be rebuilt or upgraded, or requires additional services not included within the scope of the Customer’s self-assessment because of the age of the computer, the obsolescence or unavailability of repair parts, the receipt of additional instructions from the Customer, or other factors. Customer acknowledges and agrees that the online payment transaction amount is merely an estimate and that Micro Center may charge and collect for the actual fees incurred for diagnostic and repair services performed on Customer’s computer

Limited Warranty - Micro Center warrants that all replacement parts used will be free from defects in material or workmanship for 1 year from date of purchase. Micro Center will repair or replace, at its option, parts found to be defective during that time period. Repair and installation labor is warranted for 90 days from date of purchase and is limited to a redo of the original work. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, OTHER THAN THE WARRANTY OF TITLE, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of incidental or consequential damages, so any such limitations or exclusions may not apply to you. This warranty gives you specific legal rights. You also have other rights which may vary from state to state.