bmw e90 lcd screen replacement free sample
Burnt out pixels are a very common issue on BMW E90 3-series. My car is a 2007 328xi with a BMW Professional sounds system. Instead of purchasing a used radio that will probably have the same issue I decided to replace the LCD display. We do sell replacement LCD displays, you can purchase it byclicking here. The procedure is not really difficult but you have to know how to solder and be very careful not to scratch any circuit boards when you are taking things apart. The tools you"ll need are pretty basic. You"ll need something flat and sharp to remove the climate control panel, a Philips screwdriver to remove and disassemble the radio and a soldering iron.
15. You now shold be able to remove the metal LCD housing. Remember how everything is put together so you can reassemble in the same order. There is an orange piece of plastic (I assume it is to make the LCD light up orange), one side of it is orange and the other is white. The orange side goes towards the LCD glass.
16. Remove the old LCD display. The LCD ribbon cables need to be unclipped from their connectors, to do so slide the bottom black portion for the connectors forward towards the ribbon cable.
18. That is it. You are pretty much done. Reinstall the new LCD assembly to the circuit board. Slide the ribbon cables into the connectors and lock them. Solder the housing back to the board and reassemble the radio in the same sequence you you disassembled it. The whole project took me about an hour. If i did it the second time it would probably talk half as long. Here is what the new LCD looks like:
With this item you can remove your old scratched LCD display with missing pixles and replace it with the Brand New original manufacturer part used by Alpine during manufacture of the original BMW Widescreen display.
The display will come with detailed photo step by step instuctions and installation support allowing you to plug and play replace your old Widescreen display with missing pixles. Dissasemble your old display diosconnect the old LCD Display Reassemble the display using small precision phiilips head screw driver only. No soldering or splicing of wires! This LCD display is the Original SHARP Version used by Alpine for BMW in the BMW E38, E39, X5, E46 and Range Rover Widescreen display.
Over the last decade or so, more and more of our interaction with our cars has been through a screen on the dashboard. The BMW screen -- the focal point of the iDrive navigation system -- lets you see vehicle information, navigation directions, messages and more. As time has gone on, the list of things you"ll find on the iDrive menu has increased, meaning more time spent staring at the dashboard display.
With the BMW iDrive screen being so important to your in-car experience, it"s worth getting to know a little more about it. So what types of BMW vivid screens are there? How do you protect and maintain it? And what aftermarket or OEM BMW screen upgrades and navigation screen replacements are available if you need it?
Like the screens on our phones, computers and TVs, BMW improves the screen technology in its central information display with each generation of vehicles. Compared to the screens in older models, today"s are larger and sharper, and often feature advanced features, like touchscreen control.
These screen improvements were quick to find their way to BMW"s premium models, but enthusiasts of the more mainstream vehicles often had a long wait to enjoy the latest and greatest features.
The screens in most modern BMWs stand upright from the top of the dashboard, but BMW has used a few different designs through the years. In many older vehicles, like the E65 7 Series or E60 5 Series, the screen was embedded in the dashboard itself. A small number of vehicles, like the E87 1 Series, even offered a flip up screen that could fold down into the top of the dash.
The most obvious change to BMW"s screens has been the size. The earliest iDrive screens were 6.5" -- roughly the same size as the largest iPhones or Samsung Notes. Making do with a screen the size of a phone had obvious consequences; cramped menus, poky navigation maps and a generally underwhelming experience were hallmarks of the early iDrive experience.
To remedy this, an improved BMW panoramic screen was available with higher-end navigation options. A size bump to 8.8" meant a lot more screen real estate. As these screens also took on a wide-screen aspect ratio, the space could be used more effectively. For example, iDrive split screen options allow using navigation and music side-by-side, for extra convenience.
More recently, BMW went on to introduce a larger 10.25" wide-screen display. Though initially reserved only for premium models, in the current generation it can be found in vehicles throughout BMW"s catalog. With more screen space than earlier versions, the 10.25" display is popular with people who make heavy use of their iDrive system, including CarPlay, video playback and other features.
The premium place previously occupied by the 10.25" has now been taken up by an even larger 12.3" screen, found in some of the latest vehicles like the G05 X5.
BMW has also added touchscreen control to its information displays in recent years. Like larger screens, these were first found in high-end models, but have since spread to more mainstream vehicles. Most of the latest generation have touchscreen control either as standard, or as an optional extra.
Our NBT Evo ID5/ID6 retrofit comes with a 8.8” or 10.25” BMW touch screen as an optional add-on for those vehicles that were equipped with an OEM touch screen from the factory. The 8.8” touch screen option may be available for F2x and F3x BMWs, while a 10.25” touch screen is on offer for F15, F16, G30 or G31 vehicles. Still, it’s always important to check your vehicle compatibility beforehand. Decode your VINhereand see if BMW touch screen could be an option for your car.
The latest BMW screen feature, gesture control, allows drivers to control select iDrive functions with the use of hand gestures captured by a 3D camera. If you’d like to activate it in your car, remember that only G-Series models are equipped with this function. Gesture control premiered in 2015 with the coming of the G11/G12 7 Series BMW, which included an NBT Evo ID6 iDrive, and nowadays can be found in almost every BMW with the newest MGU head unit.
Which screen you"ll have in your vehicle depends not only on what year it"s from, but also which model it is and what navigation option you have. Unsurprisingly, luxury models with premium navigation options are going to have bigger screens, and they"ll get extra features quicker.
In the 3 Series F30, for example, all vehicles with the basic Business navigation had the smaller 6.5" screen, while vehicles with Professional navigation system had the larger 8.8" screen. The only major change through the model run was the addition of touch screen control for the larger screen starting from the 2018 model year.
By 2018, the 7 Series had already had a touchscreen for two years, along with a larger 10.25" display. A 10.25" non-touchscreen display was also available in the F10 5 Series throughout production, starting in 2010. It would take the launch of the G20 3 Series in 2019 for fans of BMW"s more compact model to get the option of a similarly sized screen in their own cars.
If you’re preparing for an iDrive screen replacement you have several choices - either change it along with a full head unit replacement or get a standalone screen upgrade such as VividScreen or Panoramic Screen. See which option will suit you best.
No iDrive upgrade brings so much technology and convenience as this one.NBT Evo ID5/ID6 retrofit comes with loads of multimedia features already activated, like CarPlay,Video & Services in motion,BMW Apps, etc., and most importantly features a high-definition screen.
However, when retrofitting your BMW with a new iDrive system, it"s worth remembering that the screens available to you depend on your model, not the iDrive system you"re upgrading to. BimmerTech"sNBT Evo ID5/ID6 retrofit kitscome with 8.8" and 10.25" screens, either with or without touchscreen capability. Checking the screen(s) available for your vehicle is easy:
The fact that one iDrive system can potentially include a variety of different screen sizes sometimes means it"s possible to upgrade your screen size -- for example from 6.5" to 8.8" -- without changing any other hardware. OurPanoramic Screen retrofit for BMW F30et you step up your screen size without having to replace your whole iDrive system.
Up for a standalone BMW iDrive screen replacement? If you want to change your factory screen for one with twice or more the resolution, BimmerTech’sVividScreenandPanoramic Screen upgradeare the retrofits you can’t overlook. Both of those displays are, all in all, quite similar to each other, yet each of them comes with different kit components that fit separate technology upgrades.
The latest 8.8” 1280x480 BMW screen replacement provides noticeably better image quality compared to the factory screen, as it doubles or even triples its pixel density. Plus, it significantlyenhances the quality of the image and contrast while viewing. VividScreen is also designed to resemble the factory screen to perfectly match your BMW interior, so you shouldn’t worry about fitting it in the car. But what’s especially convenient about this BMW navigation screen replacement, is the fact that it comes with an inbuiltMultimedia Interface (MMI) module, which supports ourSmartView mirroring devicesand ourRear & Front View cameras. This means, if you’re compatible, you can get them all for a much lower price.
However, if you want to retrofit CarPlay in your BMW, VividScreen is NOT an option for you. The only screen matching ourCarPlay upgradeis a BMW Panoramic Screen upgrade.
OurPanoramic Screen upgrade, just like the VividScreen, packs a sharp 1280x480 display, OEM quality and spot-on integration with your BMW"s interior. It also comes in two screen sizes:
Although this BMW iDrive screen replacement doesn’t have it’s own MMI module, it will be a perfect fit for our CarPlay MMI Prime, if you want to add one. Pairing up the CarPlay retrofit with Panoramic Screen will enable you to use Apple CarPlay and Android Auto in full-screen, with a lot more space for your icons, messages and maps.
BMW Panoramic Screen installation will require some coding to optimize your iDrive for the bigger display, so right after you add it to your head unit remember to schedule a remote coding session with our BimmerTech technician. The session is included in the price of the retrofit.
If your iDrive screen is flickering or frozen, and no iDrive screen fixes are working, it could be necessary to replace it. If you do decide to, either because your iDrive screen is not working or you just want to change to a larger version, it"s one of the easier DIY projects you can do.
As the internal trim in each model differs, how to change your iDrive screen will depend on your vehicle. However, in general you will only need to remove the air vents below the display to allow access to the screws connecting the screen to the dashboard. With that done, the screen is attached with a simple wiring harness, which can easily be unplugged. Connecting the replacement is just as easy, and requires no soldering or wire cutting. The entire process can be completed in up to an hour.
When replacing your iDrive screen with a larger one, it"s important to remember the difference between the aspect ratio of the smaller 6.5" screen and the 8.8" or 10.25" wide-screen display. Without adjusting your iDrive, the picture on the screen will be stretched to fill the wider screen.
Depending on your vehicle and factory system, it may be possible to code your iDrive to correct the screen resolution and remove stretching. When possible, BimmerTech offers this service with all screen upgrades.
One advantage of having one of the bigger BMW iDrive screens is the possibility to use split-screen mode, to show two different things on the screen at once. For example, you might want your navigation directions on one side, with the current radio station on the other.
One time you might not want to split your screen is when using Apple CarPlay. In vehicles that support it, BMW uses a split-screen CarPlay interface by default, keeping a section on the right of the screen back for the iDrive system.
In many vehicles it"s possible to unlock full-screen Apple CarPlay by coding your iDrive, which can be done via USB or in a coding session with a skilled technician. To find out how to code BMW CarPlay full-screen mode and whether it"s available for your vehicle, take a look at ourBMW iDrive coding options.
Coding is a great way to unlock other screen features, too. Activating the USB Video Player option makes it easy to watch videos on your iDrive screen, and with the Video in Motion option, your passengers will even be able to watch as you drive. For business rather than pleasure, you can also switch to showing full text messages on the dashboard display, or your choice from dozens more iDrive options.Learn more about BMW iDrive coding, and how it can help you put the growing screens in the latest vehicles to good use.
In some BMWs, you can even get videos, messages, navigation and more straight from your Android mobile phone. The Android Screen Mirroring feature lets you cast your phone"s display to your iDrive, and get your favorite apps on your BMW dashboard screen. In many of the latest vehicles, it"s available as a coding option from BimmerTech, and is just one way toconnect your mobile phone and iDrive system.
If coding an Android Screen Mirroring feature is not for you, there are some other ways you can add an iDrive screen mirroring functionality to your vehicle. Our screen mirroring retrofits will make it possible to have your phone content mirrored onto your head unit display, but also play videos from the most popular VOD platforms on your iDrive screen.
If you’re a loyal Apple owner and don’t plan on changing your iPhone for an Android supported system any time soon, you may find ourSmartView HD Apple TV3orSmartView HD Apple TV4a spot-on screen mirroring solution.These retrofits are also the only ones to enable video streaming from the most popular VOD platforms, such as Netflix, HBO, Hulu or Amazon Prime, and fit perfectly with our BMW VividScreen upgrade.
Current-generation iDrive screens are exposed, with a special coating to prevent damage and ensure good visibility in all light conditions. However, that does mean it"s important to take good care of the screen, to prevent scratches and other damage.
Even routine maintenance can cause problems if you don"t know how to clean the BMW iDrive screen properly. Repeated rubbing with a rough cloth or harsh chemicals can wear away the anti-glare coating or cause scratches. It"s important to always use a soft microfiber cloth when wiping your iDrive screen, along with distilled water or high-quality, dedicated screen cleaning solution.
Whether you"re looking to replace your iDrive screen, upgrade your hardware, or just make a few changes to help you make the most of your dashboard display, our expert team is on hand to help you find the right upgrades and retrofits for you.Get in touchand we"ll be happy to help.
Dead LCD pixels, fading LCD pixel on the instrument cluster are quite bad looking parts of a good car’s interior, so it is understandable that you may want to get it fixed. Replacement of the complete unit is quite expensive, that is why we try to encourage people to get it fixed by a professional on half price, or do the ribbon cable replacement at home on tenth price. As we sell quality flexible ribbon cables, bulbs / lamps only for DIY repair. This very common pixel failure is known on several units, like dashboard instrument cluster (speedometer), MID, and radio units, OBC (on board computer), and SID, and happen to several CAR manufacturers that use Siemens VDO electronics such as BMW 3 5 7 series, Audi A3 A4 A6 A8, VW, Seat, Mercedes C and E class, SAAB & Rover - you will find several different models on our site.
BMW 3 series (E36), 5 series (E34, E39), 7 series (E38), 8 series (E31), X5 from 1988-2003 all have the common dead / fading / disappearing pixels on the dashboard instrument cluster / speedometer (also on the board computer) - on the large LCD display that shows valuable data such as the mileage and the on board computer messages. The LCD display pixel problem lies with the OBC ribbon cable that connects the LCD display to the circuit board of the instrument cluster. The pictures below show the speedo / instrument cluster"s LCD display before and after the silver ribbon cable KIT replacement (just an example of several board computer / dashboard instrument cluster types):
The instrument cluster units in the BMW E38, E39 and X5 models from 1994-2003 are quite similar - (they were all produced by Siemens VDO) - using the same LCD and the same ribbon cable at all models. There are minor differences, like diesel or petrol powered ones, and also some speedos come with miles others with km/hrs, however the OBC LCD display and the ribbon cable is the same at all 5 series (E39) 7 series (E38) and X5 (E53) and M5 models.
Give a much newer look to your BMW with the facelift chrome rings. These chrome rings fit to BMW 5 series (E39), 7 series (E38), and X5 (E53) from 1994-2003. Easy to apply ring set, no special tools needed.
Give a much newer look to your BMW with the facelift chrome rings. These chrome rings fit to BMW 5 series (E39), 7 series (E38), and X5 (E53) from 1994-2003. Easy to apply ring set, no special tools needed.
The OBC unit on the MID console - also known as radio / telephone unit on BMW E39, X5, M5 models from 1996-2003 are identical, using the same OBC LCD and the same ribbon cable. There are minor differences, like one comes with telephone button, others are witout, however the LCD display and the ribbon cable is the same at all 5 series (E39) X5 (E53) and M5 models.
Fits all E39 / E53 MID units assembled with bulbs (not leds). If you have uneven background light on the MID unit (some parts of the LCD are lighter, some are darker), most probably you have dead or almost dead bulbs.
The OBC unit on the MID console - also known as radio / telephone unit on BMW E38 from 1994-2003 have the very common fading or missing pixels, lines, columns.
Fits all BMW E38 7 series A/C (air conditioning) climate control units assembled with 2 small LCD"s - just like the one on the picture. Essential for dead or fading pixel repairs.
BMW 8 series (E31), from1988-1999 all have the common disappearing/fading pixels on the on board computer LCD. The problem lies with the ribbon cable that connects the LCD display to the circuit board of the MID.
BMW 3 series (E36), from1988-1999 all have the common disappearing / fading or completely dead LCD pixels on the board computer display. The problem lies with the ribbon cable that connects the LCD display to the circuit board of the MID. All 3 variants (8 / 11 / 16 buttons) are available.
This is a very common failure at BMW E90, E91, E92 BMW CD73 stereo / radio / head units, that the central display has missing lines and columns, missing and fading pixels all around the LCD display.Most common at BMW 3 series E90, but E91 E92 and other models are also affected.
This is a very common failure at BMW E90, E91, E92 BMW CD73 stereo / radio / head units, that the central display has missing lines and columns, missing and fading pixels all around the LCD display.
This is a very common failure at BMW Bavaria radio units, that the display has missing lines and columns, missing and fading pixels all around the LCD display.
Why do the BMW speedometer LCD displays fail with pixel failure? DIY Pixel repair helps with pixel failure? Well the BMW speedo manufacturers have a few minurtes only to produce a complete BMW speedo with LCD dispay and silver. Because of this, VDO Instrument Cluster manufacturer decied to assemble the BMW LCD display and the silver ribbon cable with heat bonding procedure. This BMW speedometer assembly design makes the contacts of the LCD display and the ribbon cable loose contact very fast, most cases in just a few years. This means, the BMW LCD display show pixel failures, it needs pixel repair, but both the silver ribbon cable and the BMW LCD display work well - only the connection of them is bad, tha is why you have LCD display pixel problems, and you need a pixel fix by a professional, or done DIY with an LCD display pixel repair KIT - a silver cable. How can we improve the quality of the LCD displays and the ribbon cables? Well if you assemble the LCD with the ribbon cable with pressure, no heat bonding, then the pixels of the BMW LCD display will work for an unlimited time. Dashboard LCD displays work on high temperature, so it is the best to avoid using the heat bonding procedure. Pixel repair DIY, or pixel fix by a professional?
The LCD display repair ribbon cable KIT is available in silver cable version. Once the BMW dashboard instrument cluster LCD display pixel failure was properly repaired, the BMW speedometer display will work as new, the silver ribbon cable and the LCD will work for good in the speedometer.
- If the bulbs are out behind the display, then all the rows and colunms do work on the BMW speedometer LCD display, but the background light of the LCD display is uneven, or some cases the BMW LCD display is completely dark. This case no need to repair the pixels, you do not need a silver or carbon ribbon cable, nor a new LCD display. This case you just need to buy the lightbulbs that provide light behind the BMW LCD display.
- If the BMW speedometer LCD display has really pixel problems, then typically lines or colunms of the display are missing. Several cases the characters are broken, numbers and letters shown on the speedometer display are unreadable - tha backlight is even. In case of a real pixel problem, when one or more pixels are missing from the display, you need to buy a silver ribbon cable, a carbon ribbon cable, or some cases a complete BMW LCD display. It really depends on that if it is a BMW, a Mercedes, and Audi, Saab or other make, and of course if it a MID display, a speedometer, a board computer or other LCD dipslay. Most cases, when you have a pixel failure, and you decide to repair it, it"s really worth to buy a set of bulbs too, as bulbs tend to go out during repair - this is due to the massive mechanical shocks experienced during the pixel repair procedure.
Well, most of the BMW pixel repair KITs we sell are designed to be simple and easy to use. The word easy should now be the subject of further discussion. An average BMW speedometer LCD display pixel repair is far more difficult then replacing a lightbulb. You definitely have to have good mechnical skills, and some household tools, such as nippers, screewdrivers, household tape, and other goodies to fix things around the house.
If you have to ask one of these questions, then you definitly should NOT do a BMW speedometer LCD display pixel repair at home (we were asked these questions before, this is not a joke):
Well, Pixelfix is an internationally registered trademark. Pixelfix only sells the highest quality BMW speedometer silver ribbon cables, that are capable of lifetime operation. We sell most of our repairs with lifetime warranty, and you will find the exact same displays, cables, and other spare parts that we use for professional repairs. The silver ribbon cables we use for BMW E38 E39 M5 X5 LCD display pixel repair are real silver, which is a very expensive base material, that is why the price is much higher compared to carbon ribbon cables.
You may keep an eye on your package, if you ordered the BMW LCD dispaly with postal delivery on you may check the status on your local post office"s website, or if you ordered next day deliver then you need to see TNT / FedEx or DHL tracking site for status.
All BMW LCD displays, ribbon cables, BMW speedometer spare parts bought in the webshop will come with an invoice. All invoices are issued electronically, so you will receive an e-mail with the printable invoice in it. This invoce can be printed and filed to the accounts.
No worries, we do provide technical support, and help repairing of your BMW speedometer LCD display. We have been repairing these BMW display units for years, we made hundreds of BMW speedometer repairs, so we can provide tecnical support very effectively - on the phone, via skype, via e-amil or whichever you prefer. Please note that you need to book an appointment, but it is completely free of charge.
No worries, this symptom can be due to a bagatel problem which is easy to fix. If there are no pixels on the BMW instrument cluster"s display at all, that MUST be due to one of the followings:
Let"s talk about the worst case scenario, you started the repair, but you do not seem to deal with the repair of the BMW instrument cluster"s display. This case we have a backup solution. We always stand behind our customers, so you may send the BMW speedometer LCD display unit to us for repair, and no matter what the condition of the unit is, we can help. More precisely, up to this point we always succeeded, meaning none of our customers managed to do such a damage in the unit that we could not fix. The repair does not cost a fortune, in a lucky case it is 20-30 Euro plus return delivery cost only.
The new LCD was about �80. This was half the cost I was quoted for repair by "clusterrepairs" in the UK and also saved cost/trouble of sending the radio to be repaired with risk of damage in transit.
The BMW CCC unit is a head unit model fitted on BMW cars produced between 2003 and 2010. This Professional Navigation comes with an 8.8″ wide-screen display and both the BMW CCC unit and the display are located in the dash board. The BMW CCC unit is prone to several faults, all of them totally repairable (despite of what most greedy BMW dealerships will tell their customers).
CCC stands for Car Communication Computer. iDrive is a collection of hardware and software which has the role of controlling the entertainment and communication modules in BMW cars produced from 2001 onwards. The BMW CCC unit is one particular model of the BMW iDrive system.
The CCC iDrive system is composed of three main modules: an LCD display in the dashboard, an iDrive controller (or joystick) between the front seats and the actual BMW CCC unit (also referred to as iDrive navigation) (see figure 1).
When you hear someone talking about the BMW CCC unit or CCC iDrive, most likely they are referring to the CCC module itself (iDrive navigation), not to the whole system. Sometimes, people use the short form ‘iDrive’ to refer to the CCC iDrive, which creates multiple confusions:
This iDrive complex system went through various iterations over the years. BMW likes to call these iterations ‘generations’. The CCC is part of the second generation of iDrive.
A9: We have a full healthy after-sales service system, if anything happened not to match the contract, we shall recheck and give a better service for customers, a full refund or free replacement if necessary, thank you.
We at 4x4shop.ca are proud to carry the BMW E90 E91 E92 E93 OEM FIT REPLACEMENT 8.8″ Screen Android | GPS | WIFI | BT | A2DP | USB MULTIMEDIA Original CCC CIC System at this great price. We ship to all across Canada, USA, Europe and the rest of the world. We pride ourselves of the level of Customer Service and after sales support that we provide.
The BMW E90 E91 E92 E93 OEM FIT REPLACEMENT 8.8″ Screen Android | GPS | WIFI | BT | A2DP | USB MULTIMEDIA Original CCC CIC System will no doubt enhance your driving experience. And should you have questions about this unit, our friendly and knowledgeable staff is only a phone call or email away. For your convenience, we also have live chat directly on our website. Lowest prices for the highest quality products is what we are known for in the marketplace.
I ordered a replacement screen from China on eBay. I followed this write-up to disassemble the screen unit from the car, then disassembled the electronics from the screen (no biggie) plugged the FRESH new screen into the circuit board, replaced the metal protector and connected it back to the plastics, reinstalled it into the car, and voila, totally fresh new screen. Total time. 20 minutes to remove from car and check to make sure it was part number LQ088K9LA02, 2 weeks wait to receive the part from China. Then about 1 hour to remove and replace the screen. Perfect replacement, perfect fit, really pretty easy job.