panelmount lcd displays quotation

REFERENCESPanel Mount Monitors and Open Frame Monitors: Customized Mounting SolutionsIndustrial monitors and displays vary from regular computers in many ways, mainly in their environmental characteristics. An industrial monitor is designed to withstand harsh working environments with a wide range operating temperature, dust and water resistance, shock absorption, and more. In many instances, industrial monitors are unable to be freestanding – perhaps space does not allow for that or it is too dangerous to leave a computer out into the open in certain environments. However, industrial monitors and displays, such as panel mount monitors or open frame monitors, come with many different mounting solutions that enables users to mount the monitor onto a flat surface, equipment panel, cabinets, or existing apertures. Acnodes industrial monitors supports various mounting options; wall mount, panel mount, open frame mount, VESA mount, for a wide range of industrial and commercial requirements. These mounting solutions are ideal for rugged outdoor applications, industrial applications, kiosks, cabinet displays, and custom-built machines.

Panel Mount Monitors - Mountable Industrial PCsPanel mounts are used primarily for process control and data acquisition and in some cases, are even used as a front end to another control computer in a distributed processing environment. Acnodes panel mount monitors provide an industrial LCD display panel integrated into a rugged metal open frame that is available with or without an aluminum front bezel. These high-quality industrial monitors offer full WUXGA HD resolution with up to 1000-nit brightness. There are also quad display monitors available, which are ideal for industrial automation control and CCTV monitor applications. Several of the panel mount and open frame monitor displays may also be used for outdoor sunlight applications.

We’ve designed the QES1515-300 Series Industrial Panel Mount displays for those demanding applications that required a high quality NEMA 4/12 panel mount display capable of VGA through SXGA resolutions. These rugged, high performance panel mount displays accept a variety of signal formats including the VESA-standard analog inputs and Digital DVI inputs, enabling them to perform in most modern industrial environments. For legacy or replacement applications, this rugged, 15 inch Color TFT LCD monitor can be configured to accept a wide variety of three, four, and five-wire sub-VGA slow-scan signal formats, supporting both interlaced and progressive scan input formats.

These high-quality QES1515C-PM Series Industrial Panel Mount displays are perfect for use in industrial, manufacturing, financial, transportation environments which require bright, crisp panel-mount displays. For more severe environments, we offer the QES1515C-PM in stainless steel, corrosion-resistant NEMA4x/IP66 panel-mount bezel.

To receive a quotation for a Dynamic Displays industrial LCD monitor, please provide within the quote form below, as much of the requested information as possible. This information will be used to determine the best LCD monitor replacement for your specific equipment, and to log and track your request. You will receive a response to your inquiry on the same day it was submitted.

Sunlight Readable touch screens and NEMA 4X waterproof panel mounted enclosures.  The enclosures are built from durable painted steel, stainless steel or aluminum; ensuring maximum durability, especially with our waterproof displays. For example, a  kiosk monitor a popular use for this type of  panel mounted touch screen or display. They are available with 4:3 aspect ratio or widescreen 16:9 aspect ratio.

It is a LCD monitor or touch screen that is designed to mount into a hole in your panel, door, dashboard or other surface. The electronics will be recessed into the cut-out space, enabling the front bezel to flush-mount it onto the surface of the wall, door, etc.  There are numerous advantages to this. The monitor is less likely to be damaged. It saves precious space. It has a cleaner look. And lastly, it is far easier and less expensive to provide a waterproof solution. In this instance, only the front face needs to be waterproof.

Stealth’s 17″ Panel Mount LCD Monitor designed for industrial and commercial applications comes equipped with an environmentally sealed front panel that is resistant to splashes or hose downs. All Stealth Panel Mount LCD products are easily installed by securing the rear studs into your console, panel or wall.

Stealth’s Rugged LCD Displays are constructed from solid steel and stainless steel for corrosion resistance applications. We offer Panel mount, Rack mount and Open Frame designs as standard off-the-shelf products in 15″ up to 24″ diagonal sizes.  Our LCDs are available with various Touch Screen options including Resistive or Capacitive. For non-touch applications our anti-glare protective glass overlay is installed for maximum protection.

Stealth builds high quality LCD monitors suited for industrial and commercial applications. Our 19″ Panel Mount LCD Monitor comes equipped with an environmentally sealed front panel that is resistant to splashes or hose downs. All Stealth Panel Mount LCD products are easily installed by securing the rear studs into your console, panel or wall.

Stealth’s 19″ Panel Mount Display comes standard with an environmentally sealed NEMA 4, 4X / IP66 front panel that is resistant to dust/dirt penetration or even liquid splashes. Our LCDs are available with various Touch Screen options including Resistive or Capacitive. For non-touch applications our anti-glare protective glass overlay is installed for maximum protection.

We offer Panel mount, Rack mount and Open Frame designs as standard off-the-shelf products in 8.4″ up to 24″ diagonal sizes. Stealth’s rugged LCD products are constructed from solid steel and stainless steel for corrosion resistance applications.

Rugged panel mount monitor with 12.1" color LCD display. Housed in a powder coated air craft grade enclosure, this rugged monitor is suitable for industrial military applications. A variety of other options are also available so you can customize this monitor to fit all your military applications.

The CPX1 -27 square rackmount LCD displays offer all the features you need for your harsh environment application. This extremely rugged, military-grade display is engineered to meet MIL-S-901E and MIL-STD-810G. The LCD is best in class offering revision controlled long product availability. It can be driven from multiple video sources including DVI-D, HDMI, DisplayPort or optionally 3G HD-SDI. It supports Picture-In-Picture or Picture-By-Picture to allow multiple video streams to be viewed at once. It is designed for the harshest of environments constructed off aircraft grade aluminum, optically bonded LCD cover glass and locking stainless steel hardware.

Display26.5″ Square LCD1920×1920 Resolution5mm Bonded Cover Glass StandardAnti-Reflective Coating on Cover GlassContrast Ratio: 1000: 1Brightness: 300 cd/m2Picture-in-Picture and Split Screen

To receive a quotation for a Dynamic Displays industrial LCD monitor, please provide within the quote form below, as much of the requested information as possible. This information will be used to determine the best LCD monitor replacement for your specific equipment, and to log and track your request. You will receive a response to your inquiry on the same day it was submitted.

Accuview’s PM215C, 21.5 Inch Industrial Front IP65 Sealed Panel Mount LCD Monitor is perfect for industrial or commercial display use. With a 250 nit LCD panel and a wide viewing angle as 89 degree from right side and 89 degree from left side make this optimal for adaptation into harsh environments from commercial to military applications. These rugged LCD displays also provide visibility in different weather and environmental conditions.

The CPX1 -27 square rackmount LCD displays offer all the features you need for your harsh environment application. This extremely rugged, military-grade display is engineered to meet MIL-S-901E and MIL-STD-810G. The LCD is best in class offering revision controlled long product availability. It can be driven from multiple video sources including DVI-D, HDMI, DisplayPort or optionally 3G HD-SDI. It supports Picture-In-Picture or Picture-By-Picture to allow multiple video streams to be viewed at once. It is designed for the harshest of environments constructed off aircraft grade aluminum, optically bonded LCD cover glass and locking stainless steel hardware.

Display26.5″ Square LCD1920×1920 Resolution5mm Bonded Cover Glass StandardAnti-Reflective Coating on Cover GlassContrast Ratio: 1000: 1Brightness: 300 cd/m2Picture-in-Picture and Split Screen

Rugged panel mount monitor with 12.1" color LCD display. Housed in a powder coated air craft grade enclosure, this rugged monitor is suitable for industrial military applications. A variety of other options are also available so you can customize this monitor to fit all your military applications.

IP65 Panel Mount Monitors and displays are made to fit into an aperture hole where the front of the system is then deemed to be protected from dust and liquid ingress, making our products ideal for rugged industrial environments, outdoor IP65 applications or indoor IP65 applications. A wide range of IP65 monitor display sizes, video inputs and touchscreen options ensures we have a product for every application.

At General Digital, we produce the finest rugged military displays available on the market for the U.S. Armed Forces and her allies. Every rugged monitor that we produce is uniquely equipped with highly specialized capabilities for use within tanks, armored personnel carriers, Humvees, submarines, aircraft carriers, helicopters, fighter jets and all types of land, marine, air, space and autonomous vehicle systems.

These rugged LCD innovations continue to prove indispensable as the military continues its development of on-the-move intelligence systems, threat detection, surveillance and suppression operations. Therefore, every General Digital military-grade LCD monitor and ruggedized peripheral can be customized to meet the rigorous demands presented in the modern warfare theater.

General Digital"s reputation for going above and beyond military standards means we utilize in-house equipment for engineering, design, testing and validation of all of our rugged LCD displays.

General Digital designs and builds in the United States of America, so you know you’re getting robust and dependable flat panel military LCD monitors and accessories. Our monitors will last for years, long after the others have succumbed to the elements. Below is a list of our heavy-duty product line, which will suit just about any requirement you have. And if it doesn’t, we’ll build it for you.

This smart device features an integrated computer system designed to connectto a server through a gigabit Ethernet connection. As configured, the customizable computer allows two independent video feeds on the displays, and allowsthe keyboard and trackball to provide inputs to the host server.

The Saber series consists of standard rack mount, panel mount and standalone/VESA mount military-grade and COTS (Commercial Off-The-Shelf) LCD monitors. Options include sunlight readable displays, LED backlights, NVIS goggle compatibility, touch screens, multiple video inputs and more. The

The TwoView Micro (dual display), SlimLine Micro and Rack Mount Hinge series consist of 1U and 2U high rack mount, flip-up and flip-down military-grade LCD monitors in a rack mount drawer. Options include sunlight readable displays, LED backlights, NVIS goggle compatibility, touch screens, multiple video inputs and more. They have been used in military applications such as:

Integrated for use within Humvees and ECS transit cases for the CONDOR (Command and Control On-the-Move Network, Digital Over the Horizon Relay) program (high bright displays)

The TwoView (dual display), SlimLine 1U and SlimLine Lite II series consist of 1U and 2U high rack mount, flip-up military-grade LCD monitors with integral keyboards and trackballs in a rack mount drawer. Options include sunlight readable displays, LED backlights, NVIS goggle compatibility, touch screens, multiple video inputs, keyboards and more. They have been used in military applications such as:

Integrated for use within Humvees and ECS transit cases for the CONDOR (Command and Control On-the-Move Network, Digital Over the Horizon Relay) program (high bright displays)

The Barracuda series consists of NEMA 4/6 and IP67 environmentally sealed rack mount, panel mount and standalone/VESA mount military-grade and COTS (Commercial Off-The-Shelf) LCD monitors. Options include sunlight readable displays, LED backlights, NVIS goggle compatibility, touch screens, multiple video inputs and more. The marine-grade

The Impact series consists of an open frame military-grade LCD monitor kit, ready for mounting where you need it. Options include sunlight readable displays, LED backlights, NVIS goggle compatibility, touch screens, multiple video inputs and more. They have been used in military applications such as: